Microsoft RM-92 User Guide

Download

Page 1

FCC Draft

Nokia N80 User Guide

9243910

ISSUE 1 EN

Page 2

FCC Draft

in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall

Part No. 9243910, issue No. 1

document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, the Nokia Original Enhancements logos, Nokia

N80, Visual Radio, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.

Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged

be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>. The information contained in this user guide was written for the Nokia N80 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED ‘AS IS’. EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC / INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Page 3

FCC Draft

Contents

For your safety...........................................6

Welcome.....................................................9

Accessibility solutions..........................................................9

Find information about your device................................. 9

Contact your service provider............................................9

Your Nokia N80...................................... 11

Settings ..................................................................................11

Transfer content from another device...........................11

Essential indicators.............................................................12

Keypad lock (keyguard)......................................................13

Volume and loudspeaker control....................................13

Clock........................................................................................13

Headset...................................................................................14

Wrist strap.............................................................................14

Wireless LAN.........................................................................14

Home network......................................................................16

Memory card.........................................................................17

File manager .........................................................................18

Useful shortcuts...................................................................19

Help .........................................................................................20

Tutorial ...................................................................................20

Camera......................................................21

Take pictures.........................................................................21

Edit images ...........................................................................26

Record videos .......................................................................27

Edit video clips.....................................................................29

Gallery.......................................................31

View images and video clips............................................32

Slide show.............................................................................32

Presentations........................................................................33

Albums ...................................................................................33

Back-up files.........................................................................33

Home network......................................................................33

Media applications ..................................37

Music player .........................................................................37

Image print ...........................................................................38

RealPlayer..............................................................................39

Movie director......................................................................41

Messaging.................................................43

Write text..............................................................................44

Write and send messages.................................................45

Page 4

FCC Draft

Inbox—receive messages...................................................47

Mailbox.................................................................................. 49

View messages on a SIM card.........................................51

Messaging settings.............................................................51

Contacts (Phonebook).............................56

Save names and numbers.................................................56

Copy contacts ...................................................................... 57

Add ringing tones for contacts .......................................58

Create contact groups.......................................................58

Make calls ................................................59

Voice calls .............................................................................59

Video calls............................................................................. 61

Video sharing........................................................................62

Answer or decline a call....................................................64

Log...........................................................................................66

Services.....................................................68

Access point..........................................................................68

Bookmarks view................................................................... 68

Connection security ...........................................................69

Browse....................................................................................69

Download and purchase items........................................70

End a connection ................................................................ 70

Settings..................................................................................70

Calendar ...................................................72

Create calendar entries.....................................................72

Calendar views.....................................................................72

Manage your calendar entries.........................................73

Calendar settings ................................................................73

My own.....................................................74

Visual Radio..........................................................................74

Go to—add shortcuts.......................................................... 75

IM—instant messaging ......................................................76

Games.....................................................................................79

Connectivity .............................................80

Bluetooth connectivity......................................................80

Infrared connection............................................................83

Data cable.............................................................................84

PC connections ....................................................................84

Connection manager..........................................................85

Synchronization...................................................................85

Device manager................................................................... 86

Office........................................................87

Calculator.............................................................................. 87

Converter...............................................................................87

Notes ......................................................................................87

Recorder.................................................................................88

Page 5

FCC Draft

Quickoffice ............................................................................88

Activation keys for copyright-protected files...........106

Customize your device............................ 90

Profiles—set tones...............................................................90

Change the look of your device.......................................91

Active standby mode..........................................................92

Tools......................................................... 93

Media key ..............................................................................93

Settings ..................................................................................93

Voice commands............................................................... 103

Application manager ....................................................... 104

Troubleshooting: Q&A.......................... 107

Enhancements....................................... 111

Battery information ............................. 113

Charging and discharging...............................................113

Nokia battery authentication guidelines....................114

Care and maintenance ......................... 116

Additional safety information............. 117

Page 6

FCC Draft

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the

device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless devices may be

susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING Do not use

the device at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY Use only in the normal position

as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE Only qualified personnel

may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE Your device is not

water-resistant. Keep it dry.

BACK-UP COPIES Remember to make back-up

copies or keep a written record of all important information.

CONNECTING TO OTHER DEVICES When

connecting to any other device, read its user

Page 7

FCC Draft

guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS Ensure the phone

function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

About your device

The wireless device described in this guide is approved for use on the EGSM 850/900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws, and respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.

Page 8

FCC Draft

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Enhancements, batteries, and chargers

Always switch the device off, and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, or AC-4 charger and from an AC-1, ACP-8, ACP-9, ACP-12, ACH-8, ACH-9, or ACH-12 charger when used with the CA-44 charger adapter.

The battery intended for use with this device is BL-5B.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Page 9

FCC Draft

Welcome

Model number: Nokia N80-1

Hereinafter referred to as Nokia N80.

Congratulations on your purchase of the Nokia N80. Your device provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Use the camera for recording video clips and taking pictures that you can, for example, attach as a wallpaper in the standby mode. See ‘Camera’, p. 21.

You can customize your device with ringing tones and themes. See ‘Customize your device’, p. 90.

Other features on your device are:

• Multimedia messaging. See ‘Messaging’, p. 43.

• Instant messages. See ‘IM—instant messaging’, p. 76.

• Music player. See ‘Music player’, p. 37.

• Wireless Bluetooth technology. See ‘Bluetooth connectivity’, p. 80.

• Wireless local area network (wireless LAN) connectivity. See ‘Wireless LAN’, p. 14.

• Home networking through wireless LAN and Universal Plug and Play. See ‘Home network’, p. 16.

•Java

• Web browser. See ‘Services’, p. 68.

applications. See ‘Application manager’, p. 104.

Accessibility solutions

Nokia is committed to making mobile devices easy to use for all individuals, including those with disabilities. For more information, visit www.nokiaaccessibility.com.

Find information about your device

Information about your device is provided on the device label, which is on the back of the device under the battery. The label contains the model and serial numbers, as well as the following:

• Device type (such as RM-92)

• Device model (such as Nokia N80-1)

• International mobile equipment identity (IMEI)

• FCC ID number

Contact your service provider

In many cases, the service provider will make available descriptions of its services and instructions for using features, such as the following:

• Voice mail and voice privacy

Welcome

Page 10

FCC Draft

• Call waiting, call forwarding, and caller ID

•Messaging

• News and information services

• Selected Internet services

Welcome

Service providers may differ in their support of features.

Page 11

FCC Draft

Your Nokia N80

Settings

You may have MMS, GPRS, streaming, and Mobile Internet settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.

Transfer content from another device

You can transfer content, such as contacts, from a compatible Nokia device to your Nokia N80 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N80.

You can insert your SIM card in the other device. When Nokia N80 is switched on without a SIM card, the offline profile is automatically activated.

Transfer content

1 To use the application for the first time, press , and

select Tools > Transfer. If you have used the

application before and want to start a new transfer, select Transfer data. In the information view, select Continue.

2 Select whether you want to use Bluetooth connectivity

or infrared to transfer the data. Both devices must support the selected connection type.

3 If you select Bluetooth connectivity:

To have Nokia N80 search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia N80. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select

OK. The devices are now paired. See ‘Pair devices’,

p. 82. For some phone models, the Transfer application is sent to the other device as a message. To install

Transfer on the other device, open the message, and

follow the instructions on the display. If you select infrared, connect the two devices. See ‘Infrared connection’, p. 83.

4 From your Nokia N80, select the content you want to

copy from the other device.

Content is copied from the memory of the other device to the corresponding location in your Nokia N80. Copying

Your Nokia N80

Page 12

FCC Draft

time depends on the amount of data to be transferred. You can cancel copying and continue later.

If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select

Phones, scroll to the device, and select Options > Synchronize. Follow the instructions on the display.

Your Nokia N80

To view the log of a previous transfer, select Transfer log.

Essential indicators

The device is being used in a GSM network.

The device is being used in a UMTS network (network

service).

You have one or more unread messages in the Inbox

folder in Messag..

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox

folder.

You have missed calls.

Shown if Ringing type is set to Silent and Message

alert tone, IM alert tone, and E-mail alert tone are set

to Off.

The device keypad is locked.

A clock alarm is active.

The second phone line is being used (network service).

All calls to the device are forwarded to another number. If you have two phone lines (network service), the indicator for the first line is and for the second

A headset is connected to the device.

The connection to a headset with Bluetooth

connectivity has been lost.

A loopset is connected to the device.

A TTY is connected to the device.

A data call is active.

A GPRS or EDGE packet data connection is available.

A GPRS or EDGE packet data connection is active.

A GPRS or EDGE packet data connection is on hold.

A UMTS packet data connection is available.

A UMTS packet data connection is active.

A UMTS packet data connection is on hold.

You have set the device to scan for wireless LANs, and

a wireless LAN is available. See ‘Wireless LAN’, p. 99.

A wireless LAN connection is active in a network that

has encryption.

Page 13

FCC Draft

A wireless LAN connection is active in a network that

does not have encryption.

Bluetooth connectivity is on.

Data is being transmitted using Bluetooth

connectivity.

A USB connection is active.

An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.

Keypad lock (keyguard)

To lock the keys, close the sliding keypad, and select Yes when Lock keypad? is displayed. To lock the keys when the slide is closed, press the power key, and select Lock

keypad.

To unlock, open the sliding keypad, or press (Unlock), and select OK when Unlock keypad? is displayed.

When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.

Volume and loudspeaker control

To increase or decrease the volume level when you have

an active call or are listening to a sound, press or .

The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume may be extremely loud.

To use the loudspeaker during a call, select Options >

Activate loudsp..

To turn off the loudspeaker, select Options > Activate

handset.

Clock

Press , and select Clock. To set a new alarm, select

Options > Set alarm. When an alarm is active, is

shown.

To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not

Your Nokia N80

Page 14

FCC Draft

select Yes when wireless phone use may cause interference or danger.

To cancel an alarm, select Clock > Options > Remove

alarm.

clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.

Headset

Clock settings

To change the clock settings, select Clock > Options >

Your Nokia N80

Settings.

To change the time or date, select Time or Date.

To change the clock shown in the standby mode, select

Clock type > Analog or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Auto time update > On.

To change the alarm tone, select Clock alarm tone.

World clock

To open the world clock view, open Clock, and press . In the world clock view, you can view the time in different cities.

To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list.

To set your current city, scroll to a city, and select

Options > My current city. The city is displayed in the

Connect a compatible headset to the Pop-Port connector of your device.

Warning: When

you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Wrist strap

Thread the strap as shown, and tighten it.

Wireless LAN

Your device supports wireless local area network (wireless LAN). With wireless LAN, you can connect your device to the Internet and compatible devices that have wireless LAN. For information about using your device in a home network, see ‘Home network’, p. 16.

Page 15

FCC Draft

There may be restrictions on using wireless LAN in some locations. Check with your local authorities or service provider.

Features using wireless LAN, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

Your device supports the following wireless LAN features:

• IEEE 802.11b/g standard

• Operation at a frequency of 2.4 GHz

• Encryption methods wired equivalent privacy (WEP)

with keys up to 128 bits, Wi-Fi protected access (WPA), and 802.1x. These functions can be used only if they are supported by the network.

You can create an Internet access point (IAP) in a wireless LAN, and use it for applications that need to connect to the Internet.

Create an Internet access point

1 Press , and select Connect. > Conn mgr > Availab.

WLAN.

2 The device searches for wireless LANs within range.

Scroll to the network in which you want to create an Internet access point, and select Options > Define

access point.

3 The device creates an Internet access point with default

settings. To view or change these settings, see ‘Access points’, p. 96.

When an application asks you to select an access point, select the created access point, or to search for wireless LANs in range, select WLAN network.

A wireless LAN connection is established when you create a data connection using a wireless LAN Internet access point. The active wireless LAN connection ends when you end the data connection. To end the connection, see ‘Connection manager’, p. 85.

You can use wireless LAN during a voice call or when packet data is active. You can only be connected to one wireless LAN access point device at a time, but several applications can use the same wireless LAN connection.

When you activate the Offline profile, you can still use wireless LAN (if available). Remember to comply with any applicable safety requirements when establishing and using a wireless LAN connection.

There are two operating modes in wireless LAN: infrastructure and ad hoc.

In the infrastructure operating mode, your device is connected to a wireless LAN access point device. Through the access point device, you can access other compatible devices or a wired LAN.

In the ad hoc operating mode, compatible devices can send and receive data directly with each other. To create an Internet access point for the ad hoc network, see ‘Access points’, p. 96.

Your Nokia N80

Page 16

FCC Draft

Tip! To check the unique Media Access Control (MAC)

address that identifies your device, enter *#62209526# in the standby mode.

Home network

Your device is compatible with Universal Plug and Play architecture (UPnP). Using a wireless LAN access point

Your Nokia N80

device or a wireless LAN router, you can create a home network and connect compatible UPnP devices that support wireless LAN to the network, such as your Nokia N80, a compatible PC, a compatible printer, a compatible sound system, a compatible TV, or a sound system or TV equipped with a compatible wireless multimedia receiver.

After you have configured the home network, you can copy, view, or play compatible media files and print images in Gallery on the other connected compatible devices, for example, view images stored on your Nokia N80 on a compatible TV. See ‘Home network’, p. 33 and ‘Image print’, p. 38.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, transferred, viewed, played, or printed.

To set up home networking in your wireless LAN, first create and configure your wireless LAN home Internet access point, then configure the devices. On your Nokia N80, configure the settings in the Home network

application. See ‘Home network’, p. 33. To connect a compatible PC to the home network, on the PC, you must install the Home Media Server software from the CD-ROM supplied with your Nokia N80.

After you have completed the necessary configurations in all devices connected to the network, you can start using the home network. See ‘View media files’, p. 35.

The home network uses the security settings of the wireless LAN connection. Use the home network feature in a wireless LAN infrastructure network with a wireless LAN access point device or a router and encryption enabled.

Security tips

When you configure your wireless LAN home network, enable an encryption method, first on your access point device or router, then on the other compatible devices you intend to connect to your home network. Refer to the documentation of the devices. Keep any passcodes secret and in a safe place separate from the devices.

To view or change the settings of the wireless LAN Internet access point in your Nokia N80, see ‘Access points’, p. 96.

If you use the ad hoc operating mode to create a home network with a compatible device, enable one of the encryption methods in WLAN security mode when you configure the Internet access point. This step reduces the risk of an unwanted party joining the ad hoc network.

Page 17

FCC Draft

Your device notifies you if another device attempts to connect to it and the home network. Do not accept connection requests from an unknown device.

If you use wireless LAN in a network that does not have encryption, switch off sharing Nokia N80 files to other devices, or do not share any private media files. For how to change sharing settings, see ‘Home network’, p. 33.

Memory card

You can use a compatible miniSD card as extra storage space to save the memory on your device. You can also back up information from your device to the memory card.

Use only compatible miniSD cards with this device. Other memory cards, such as Reduced Size MultiMediaCards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Keep all memory cards out of the reach of small children.

Insert the memory card

1 To insert the memory

card, place your finger in the recess on top of the door of the memory card slot, and open the door.

2 Insert the memory card

in the slot. Make sure that the contact area on the card is facing up and towards the slot with the bevelled corner facing the base of the device.

3 Push the card in. You can hear a

click when the card locks into place.

4 Close the door. You cannot use

the memory card if the door is open.

Eject the memory card

1 Before you eject the card, press

the power key, and select Remove mem. card. All applications are closed.

2 When Remove memory card and press 'OK' is

displayed, open the door of the memory card slot.

3 Press the memory card to release it from the slot.

Your Nokia N80

Page 18

FCC Draft

4 Remove the memory card. If the device is switched on,

select OK.

Important: Do not remove the memory card in the

middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

Your Nokia N80

Memory card tool

Press , and select Tools > Memory. You can use a miniSD card as extra storage space and for backing up the information in the device memory.

To back up information from the device memory to a memory card, select Options > Backup phone mem.

To restore information from the memory card to the device memory, select Options > Restore from card.

Format a memory card

When a memory card is reformatted, all data on the card is permanently lost.

Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.

To format a memory card, select Options > Format mem.

card. Select Yes to confirm.

File manager

Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.

You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.

To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools > File

mgr.. The device memory view ( ) opens. Press to

open the memory card view ( ), if available.

To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to

folder or Copy to folder.

To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.

Page 19

FCC Draft

View memory consumption

To view what types of data you have in the device and how much memory the different data types consume, select

Options > Memory details. The amount of available free

memory is shown in Free memory.

• Saved images, videos, or sound files

• Contact information

•Calendar notes

• Downloaded applications. See also ‘Application manager’, p. 104.

• Any other data that you no longer need

Memory low—free memory

The device notifies you if the device or the memory card memory is low.

To free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card, and a folder.

You can also transfer media files to a compatible PC, for example, using the transfer option in Gallery. See ‘Back-up files’, p. 33.

Tip! You can use Nokia Phone Browser available in

Nokia PC Suite to view the different memories in your device and transfer data.

To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:

• Messages from Inbox, Drafts, and Sent folders in

Messag.

• Retrieved e-mail messages from the device memory

• Saved Web pages

Useful shortcuts

Use shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions.

Standby mode

• To switch between applications that are open, press and hold , and select an application. If memory is low, the device may close some applications. The device saves any unsaved data before closing an application. Leaving applications running in the background increases the demand on battery power and reduces the battery life.

• To start the camera, press and hold the capture key for more than 1 second.

• To call your voice mailbox (network service), press and hold .

• To open multimedia applications, press or press and hold . See ‘Media key’, p. 93.

Your Nokia N80

Page 20

FCC Draft

• To change the profile, press , and select a profile.

• To switch between Normal and Silent profiles, press

and hold . If you have two phone lines (network service), this action switches between the two lines.

• To open the last dialed numbers list, press .

• To use voice commands, press and hold .

• To start a connection to Services (network service),

Your Nokia N80

press and hold . See ‘Services’, p. 68.

For further shortcuts available in the standby mode, see ‘Active standby mode’, p. 92.

Edit text and lists

• To mark an item in a list, scroll to it, and press and at the same time.

• To mark multiple items in a list, press and hold

while you press or . To end the selection, release

, then release .

• To copy and paste text: To select letters and words,

press and hold . At the same time, press or to highlight text. To copy the text to clipboard, while still holding , select Copy. To insert the text into a document, press and hold , and select Paste.

Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.

When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .

To open help from the main menu, select Tools > Help. Select the desired application to view its help topics.

Tutorial

The tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select My own > Tutorial and the section you want to view.

Help

Page 21

FCC Draft

Camera

Your Nokia N80 has two cameras, a high resolution camera on the back of the device (the main camera) and a lower resolution camera on the front (the secondary camera). Both cameras can be used to take still pictures and record video. The secondary camera on the front is used in portrait mode, and the main camera on the back in landscape mode.

The Nokia N80 device supports an image capture resolution of 2048 x 1536 pixels. The image resolution in these materials may appear different.

To activate the camera, press , and select

Imaging > Camera, or

press and hold the capture key. In the viewfinder, you can see the view to be captured. To switch between cameras, select

Options > Use secondary camera or Use main camera.

The images and video clips are automatically saved in

Images & video folder in Gallery. The cameras produce

.jpeg images. Video clips are recorded in the 3GPP file format with the .3gp file extension (Normal and Sharing

video quality modes) or in the .mp4 file format (High video quality mode). See ‘Video settings’, p. 28.

You can send images and video clips in a multimedia message, as an e-mail attachment or by using Bluetooth connectivity.

Take pictures

If the camera is in Video mode, open the image mode by selecting Options > Image mode.

To select the secondary camera, for example, to include yourself in the picture, select Options > Use secondary

camera.

To empty memory for new images, and delete copies of the transferred files, select Options > Go to free memory (main camera only).

To take a picture, in the main camera, press the capture key. When using the secondary camera, press the scroll key. Do not move the device before the image is saved.

To make lighting and color adjustments before taking a picture, select Options > Image setup. See ‘Setup settings—Adjust color and lighting’, p. 24.

Camera

Page 22

FCC Draft

Saving the captured image may take longer if you change the zoom, lighting, or color settings.

To select a shooting mode, select Options > Image

Camera

setup > Shooting mode. See ‘Shooting modes’, p. 24.

The camera indicators show the following:

• The device memory ( ) and memory card ( )

indicators (1) show where images are saved.

• The images indicator (2) estimates how many images,

depending on the selected image quality, fit in the remaining memory of your device or the memory card (if inserted).

• The shooting mode indicator (3) shows the active

shooting mode.

•The flash indicator

(4) shows if the flash is set to Automatic (), Red eye redu. (), On (), or

Off ().

• The self-timer

indicator (5) shows that the self-timer is activated. See ‘You in the picture—self-timer’, p. 23.

• The sequence mode indicator (6) shows that the

sequence mode is active. See ‘Take pictures in a sequence’, p. 23.

• The image resolution indicator (7) indicates the quality of the picture.

Shortcuts are as follows:

• Scroll up and down to zoom in and zoom out. The zoom indicator, which appears on the side pane, shows the zoom level.

• Scroll left to enter the Image setup settings. See ‘Setup settings—Adjust color and lighting’, p. 24.

When taking a picture, note the following:

• Use both hands to keep the camera still.

• To take images or record video in different environments, use the proper shooting mode for each environment.

• The quality of a zoomed picture is lower than that of a nonzoomed picture.

• The camera goes into the battery saving mode if there are no keypresses for a moment. To continue taking pictures, press .

After the image is taken:

• If you do not want to keep the image, press , or select Options > Delete.

• To send the image Via multimedia, Via e-mail, Via

Bluetooth, or Via infrared, press , or select Options > Send. For more information, see

‘Messaging’, p. 43 and ‘Bluetooth connectivity’, p. 80. This option is not available during an active call.

Page 23

FCC Draft

• To send an image to the other party during an active

call, select Options > Send to caller.

• To edit the picture, select Options > Edit. See ‘Edit

images’, p. 26.

• To print the picture, select Options > Print. See ‘Image

print’, p. 38.

Take pictures in a sequence

Advanced sequence is available only in the main camera.

To set the camera to take several pictures in a sequence, select Options > Advanced sequence, and set the shooting frequency. The number of pictures is restricted by the available memory to a maximum of 100.

To take the pictures, press the capture key.

After you take the pictures, they are shown in a grid on the display. To view a picture, press to open it.

You can also use the sequence mode with the self-timer.

To return to the sequence mode viewfinder, press the capture key.

You in the picture—self-timer

Self-timer is available only in the main camera.

Use the self-timer to delay the capture so that you can include yourself in the picture. To set the self-timer delay,

select Options > Self timer > 2 seconds, 10 seconds, or

20 seconds. To activate the self-timer, select Activate.

The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay elapses.

You can also use the self-timer in the sequence mode.

Tip! Select Options > Self timer > 2 seconds to keep

your hand steady when taking a picture.

The flash

The flash is available only in the main camera.

Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.

The camera has an LED flash for low light conditions. The following flash modes are available: Automatic (),

Red eye redu. (), On (), and Off ().

To use the flash, select Options > Image setup > Flash >

On.

If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This indicates to the subject of the picture that the picture is taken. There is no flash effect on the resultant picture.

Camera

Page 24

FCC Draft

If the flash is set to Red eye redu., it decreases the redness of the eyes in the picture.

Camera

Setup settings—Adjust color and lighting

To enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, select Options > Image setup or Video setup, and select from the following options:

Shooting mode—Select a proper shooting mode for the

environment in which you take pictures. Every shooting mode uses its own lighting settings that have been adjusted according to a certain kind of environment.

Flash (images only)—Set the flash according to the

lighting conditions. See ‘The flash’, p. 23.

White balance—Select the current lighting condition

from the list. This allows the camera to reproduce colors more accurately.

Exposure value (images only)—Adjust the exposure time

of the camera.

Color tone—Select a color effect from the list.

Image sharpness (images only)—Adjust the sharpness of

the image.

Brightness—Select the brightness you want.

Contrast—Select the contrast you want.

Color saturation—Adjust the depth of the colors in the

picture.

The screen display changes to match any settings you make, so that you see how the change affects the pictures or videos.

The available settings vary depending on the selected camera.

The setup settings are camera specific; if you change the settings in the secondary camera, the settings in the main camera do not change. The setup settings do, however, transfer between the image and video modes.

The setup settings return to the default settings when you close the camera. If you select a new shooting mode, the settings are replaced by the settings of the selected shooting mode. See ‘Shooting modes’, p. 24. If you must change the setup settings, you can change them after selecting a shooting mode.

Shooting modes

A shooting mode helps you to find the right color and lighting settings for the current environment. Select a proper shooting mode for taking pictures or recording video clips from a shooting modes list. The settings of each

Page 25

FCC Draft

shooting mode have been set according to a certain style or environment.

Your device has a close-up switch located under the main camera lens. With the close-up switch you can select whether you want to take close-up pictures or pictures of text. To use the close-up mode as a default, turn the switch to close-up mode ( ). To switch between Close-up mode and Document text shooting modes, select Options >

Image setup > Shooting mode.

To select another shooting mode, turn the switch back to the normal position ( ), select Options > Image setup or

Video setup > Shooting mode, and the proper shooting

mode.

Video shooting modes

Automatic ( )(default) and Night ()

Image shooting modes

Automatic () (default), User (), Portrait (), Landscape (), Sports ( ) (when you use the Sports

shooting mode, the resolution of the images is reduced to 1280x960. See Image quality in ‘Still image camera settings’, p. 25.), Night landscape (), Night portrait (), and Candlelight ().

When you take pictures, the default shooting mode is

Automatic. You can select the User shooting mode as the

default shooting mode.

To make your own shooting mode suitable for a certain environment, scroll to User, and select Options >

Change. In the user defined shooting mode you can adjust

different lighting and color settings. To copy the settings of another shooting mode, select Based on shooting

mode and the desired shooting mode.

The available shooting modes vary depending on the selected camera.

Still image camera settings

There are two kinds of settings for the still image camera:

Image setup and main settings. To adjust Image setup,

see ‘Setup settings—Adjust color and lighting’, p. 24. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:

Image quality—Print 3M - Large (resolution 2048 x

1536), Print 2M - Med. (resolution 1600 x 1200), Print

1.3M - Small (resolution 1280 x 960), E-mail

0.5M(resolution 800 x 600), or MMS 0.3M (resolution

640 x 480). The better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M - Large, Print 2M - Med., or Print

1.3M - Small. If you want to send it through e-mail,

Camera

Page 26

FCC Draft

select E-mail 0.5M. To send the image through MMS, select MMS 0.3M.

Add to album—Select whether you want to save the

Camera

image to a certain album in Gallery. If you select Yes, a list of available albums opens.

Show captured image—Select Yes if you want to see the

captured image after it is taken, or No if you want to continue taking pictures immediately.

Extended zoom (main camera only)—Select On if you

want to achieve maximum zoom when taking a picture. The quality of a zoomed picture is lower than that of a nonzoomed picture. If you want to limit the zoom to where the selected image quality is maintained, select

Off.

Default image name—Define the default name for the

images.

Shutter tone—Select the tone you want to hear when

you take a picture.

Memory in use—Select where to store your images.

Edit images

To edit the pictures after taking them, or the ones already saved in Gallery, select Options > Edit.

Select Apply effect to, for example, crop and rotate the image; adjust the brightness, color, contrast, and resolution; and add effects, text, clip art, or a frame to the picture.

To crop an image, select Options > Apply effect > Crop. To crop the image size manually, select Manual, or select a predefined aspect ratio from the list. If you select

Manual, a cross appears in the upper left corner of the

image. Move the scroll key to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle, which forms the cropped image.

If you selected a predefined aspect ratio, select the upper left corner of the area to be cropped. To resize the highlighted area, use the scroll key. To freeze the selected area, press . To move the area within the picture, use the scroll key. To select the area to be cropped, press .

To reduce redness of the eyes in an image, select Options >

Apply effect > Red eye reduction. Move the cross onto

the eye, and press . A loop appears on the display. To resize the loop to fit the size of the eye, move the scroll key. To reduce the redness, press .

Shortcuts in the image editor:

• To view an image in the full screen, press . To return to the normal view, press again.

Page 27

FCC Draft

• To rotate an image clockwise or counterclockwise, press or .

• To zoom in or out, press or .

• To move on a zoomed image, scroll up, down, left, or right.

Record videos

If the camera is in Image mode, select video mode by selecting Options > Video mode.

To select the secondary camera to, for example, include yourself in the video, select Options > Use secondary

camera.

To empty memory for new video clips, and delete copies of the transferred files, select Options > Go to free memory (main camera only).

1 In the main camera, press the capture key, or in the

secondary camera, press to start recording. The record icon is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video.

2 To pause recording at any time, select Pause. The pause

icon ( ) blinks on the display. Video recording automatically stops if recording is set to pause and there are no keypresses within a minute.

3 Select Continue to resume recording.

4 Select Stop, to stop recording. The video clip is

automatically saved to the Images & videofolder of

Gallery. See ‘Gallery’, p. 31.

To make lighting and color adjustments before recording a video, select Options > Video setup. See ‘Setup settings—Adjust color and lighting’, p. 24.

To select a shooting mode, select Options > Video

setup > Shooting mode. See ‘Shooting modes’, p. 24.

Video recorder indicators show the following:

• The device memory ( ) and memory card ( ) indicators (1) show where the video is saved.

• The current video length indicator (2) shows elapsed time and time remaining.

• The shooting mode indicator (3) shows the active shooting mode.

• Image stabilizer (4) indicates that the image stabilizer is active, and dampens the effects of small movements on the image sharpness (main camera only).

Camera

Page 28

FCC Draft

• The microphone indicator (5) shows that the microphone is muted.

• The file format indicator (6) indicates the format of the

Camera

video clip.

• The video quality indicator (7) indicates whether the quality of the video is High, Normal or Sharing.

• The video file type indicator (8) indicates the format in which the video clip is saved.

Shortcuts are as follows:

• Scroll up or down to zoom in or zoom out. The zoom indicator, which appears on the side pane, shows the zoom level.

• Scroll left to enter the Video setup settings. See ‘Setup settings—Adjust color and lighting’, p. 24.

After a video clip is recorded:

• To immediately play the video clip you just recorded, select Options > Play.

• If you do not want to keep the video, press , or select Options > Delete.

• To send the video Via multimedia, Via e-mail, Via

Bluetooth, or Via infrared, press , or select Options > Send. For more information, see

‘Messaging’, p. 43 and ‘Bluetooth connectivity’, p. 80. This option is not available during an active call. You cannot send video clips saved in the .mp4 file format in a multimedia message.

• To send a video clip to the other party during an active

call, select Options > Send to caller.

• To edit the video, select Options > Edit. See ‘Edit video

clips’, p. 29.

Video settings

There are two kinds of settings for the video recorder:

Video setup and main settings. To adjust Video setup, see

‘Setup settings—Adjust color and lighting’, p. 24. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select

Options > Settings and from the following:

Audio recording—Select On if you want to record both

image and sound.

Video quality—Set the quality of the video clip to High, Normal, or Sharing. The quality is indicated with one of

the following icons: (High), (Normal), or (Sharing). If you select High or Normal, the length of the video recording is restricted by the available space on your memory card (if inserted), and up to 1 hour per clip. If you want to view the video on a compatible TV or PC, select

High video quality, which has CIF resolution (352x288)

and the .mp4 file format. You cannot send video clips saved in the .mp4 file format in a multimedia message. If you want to view the clip in mobile devices, select Normal,

Page 29

FCC Draft

which has QCIF resolution (176x144) and the .3gp file format. To send the video clip through MMS, select

Sharing (QCIF resolution, .3gp file format). The video clip

is limited to 300 KB (about 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 KB. Contact your network operator or service provider for more information.

Add to album—Select whether you want to save the

recorded video clip to a certain album in Gallery. Select

Yes to open a list of available albums.

Show captured video—Select whether you want the first

frame of the recorded video clip to be shown on the display after the recording stops. Select Options > Play to view the video clip.

Default video name—Define the default name for video

clips.

Memory in use—Define the default memory store: device

memory or memory card (if inserted).

Edit video clips

To edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options >Edit. See ‘Gallery’, p. 31. You can create custom video clips by

combining and trimming video clips, and adding images, sound clips, transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips.

In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down.

Edit video, sound, image, text, and transitions

To create custom video clips, mark and select one or more video clips, and select Options > Edit.

To modify the video, select from the following options:

Edit video clip:

Cut—Trims the video clip in the Cut video clip view.

Add color effect—Inserts a color effect on the video clip.

Use slow motion—Slows the speed of the video clip.

Mute sound/Unmute sound—Mutes or unmutes the

original video clip sound.

Move—Moves the video clip to the selected location.

Remove—Removes the video clip from the video.

Camera

Page 30

FCC Draft

Duplicate—Makes a copy of the selected video clip.

Edit text (shown only if you added text)—To move,

remove or duplicate text; change the color and style of

Camera

the text; define how long it stays on the screen; and add effects to the text.

Edit image (shown only if you added an image)—To move,

remove or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image.

Edit sound clip (shown only if you added a sound clip)—

To cut or move the sound clip, to adjust its length, or to remove or duplicate the clip.

Edit transition—There are three types of transitions: at

the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active.

Insert—Video clip, Image, Text, Sound clip, or New sound clip.

Movie—Preview the movie

in the full screen or as a thumbnail, save or send the movie, or cut the movie to a proper size for sending it in a multimedia message.

To take a snapshot of a video clip, in the Cut video view, select Options > Take snapshot, or in the thumbnail Preview view, press , and select Take snapshot.

To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory.

In the Settings view, you can also define Default video

name, Default sc. shot name, Resolution, and Memory in use.

Select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared, if you want to send the video. Contact your network operator or service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message,

appears.

Tip! If you want to send a video clip that is over the

maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth wireless technology. See ‘Send data using Bluetooth connectivity’, p. 82. You can also transfer your videos into a compatible PC using Bluetooth connectivity, or by using a compatible SD memory card reader (enhancement).

Page 31

FCC Draft

Gallery

To store and organize your images, video clips, sound clips, playlists, and streaming links, or share your files with other compatible Universal Plug and Play (UPnP) devices through wireless LAN, press , and select Gallery. To open the gallery from the Camera application, select Options > Go

to Gallery. From Camera, only the Images & video folder

is available.

Tip! To switch from Gallery to the camera, in the

Images & video folder, select Camera.

Select Images & video ,

Tracks , Sound clips , Streaming links , Presentations , All files

, or Home network ,

and press to open it.

You can browse and open folders, mark, copy, and move items to folders. You can also create albums; and mark, copy, and add items to albums. See ‘Albums’, p. 33.

To open a file, press . See ‘View images and video clips’, p. 32. Video clips, .ram files, and streaming links are

opened and played in the RealPlayer application, and the sound clips in the Music player application. See ‘RealPlayer’, p. 39, and ‘Music player’, p. 37.

To copy or move files to a compatible memory card (if inserted) or to device memory, select a file and Options >

Organize > Copy to memory card/Move to memory card

or Copy to phone mem./Move to phone mem..

Files stored on the memory card (if inserted) are indicated with .

To reduce the size of files that you already copied to other locations, such as to a compatible PC, select Options >

Shrink. Selecting Shrink reduces the resolution of an

image to 640x480. To increase free memory space, select a file and Options > Free memory. See ‘Back-up files’, p. 33.

To download files into Gallery in one of the main folders using the browser, select Graphic downl. or Video downl.,

Track downl., or Sound downl.. The browser opens, and

you can select a bookmark from which the site can download.

Gallery

Page 32

FCC Draft

View images and video clips

Pictures taken and video clips recorded with the camera

Gallery

are stored in the Images & video folder in Gallery. The quality of a video clip is indicated with one of the following icons: (High), (Normal) and (Sharing). Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, through Bluetooth connectivity, or by using infrared. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the device memory or on a compatible memory card (if inserted).

Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files can be seen on the display. To browse the files, scroll up or down. To browse the files in a continuous loop, press and hold the scroll key up or down.

To browse files in groups, scroll left or right.

To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens.

To add an image or a video clip to an album in Gallery, select Options > Albums > Add to Album. See ‘Albums’, p. 33.

To create custom video clips, select a video clip, or several clips in Gallery, and select Options > Edit. See ‘Edit video clips’, p. 29.

To print your images on a compatible printer connected to your device, or to store them on your memory card (if inserted) for printing, select Options > Print. See ‘Image print’, p. 38.

To zoom an image, select Options > Zoom in or Zoom out. The zooming ratio is at the top of the display. The zooming ratio is not stored permanently.

To use the picture as a background image, select the picture, and Options > Set as wallpaper.

To delete an image or video clip, press .

Slide show

Select Options > Slide show > Start to view images and video clips in the full screen mode. The slide show starts from the oldest file. Select from the following:

• Play—to open the RealPlayer application, and play a

video clip

• Pause—to pause the slide show

• Continue—to resume the slide show

• End—to close the slide show

To browse the images, press (previous) or (next).

Page 33

FCC Draft

To adjust the tempo of the slide show, before starting the slide show, select Options > Slide show > Settings >

Delay between slides.

To add sound to the slide show, select Options > Slide

show > Settings and from the following:

• Music—Select On or Off.

• Track—Select a music file from the list.

To decrease or increase the volume, press or .

To create a new album, select Options > New album. Enter a name for the album, and select OK.

To add a picture or a video clip to an album in Gallery, scroll to a picture or video clip, and select Options >

Albums > Add to album. A list of albums opens. Select

the album to which you want to add the picture or video clip, and press .

To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery.

Gallery

Presentations

With presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play.

To zoom in, press . To zoom out, press .

To switch between full screen and normal screen, press *.

Albums

With albums you can conveniently manage your images and video clips. To view the albums list, in the Images &

video folder, select Options > Albums > View albums.

Back-up files

To transfer and back-up media files from your device to a compatible PC through the Wireless LAN, select Options >

Transfer > Start. See ‘Wireless LAN’, p. 14.

Your device starts a device search. Select a device, and a folder to which you want to transfer the media files. Press

OK.

To change the Storage device or Storage folder settings, select Options > Settings.

Home network

Your device is compatible with Universal Plug and Play architecture (UPnP). Using a wireless LAN access point

Page 34

FCC Draft

device or a wireless LAN router, you can create a home network and connect compatible UPnP devices that support wireless LAN to the network, such as your Nokia

Gallery

N80, a compatible PC, a compatible printer, and a compatible sound system or a TV, or a sound system or TV equipped with a compatible wireless multimedia receiver.

Please note that using the wireless LAN functionality of the Nokia N80 in a home network requires a working wireless LAN home connection setup and the other target home devices to be UPnP enabled and to be connected to the same home network.

You can share media files saved in Gallery with other compatible UPnP devices using the home network. To manage your Home network settings, press , and select Connect. > Home network. You can also use the home network to view, play, copy, or print compatible media files from Gallery. See ‘View media files’, p. 35.

Home network settings

To share media files saved in Gallery with other compatible UPnP devices through wireless LAN, you must first create and configure your wireless LAN home Internet access point, and then configure the Home

network application. See ‘Wireless LAN’, p. 14, and the

wireless LAN settings in ‘Access points’, p. 96 and ‘Wireless LAN’, p. 99.

The options related to Home network are not available in

Gallery before the Home network settings have been

configured.

Configure Settings

To configure the Home network application, select

Connect. > Home network > Settings, and from the

following:

Content sharing—Allow or deny sharing media files with

compatible devices. Do not set Content sharing on before you have configured all the other settings. If you set

Content sharing on, the other UPnP compatible devices in

the home network can view and copy your files.

Home access point—Select your home Internet access

point. If your home network does not have wireless LAN security settings enabled, you will get a security warning. You can continue, and switch the wireless LAN security on later; or cancel defining the access point, and first switch on the wireless LAN security. See Wireless LAN in ‘Access points’, p. 96.

My device name— Enter a name for your device that is

shown to the other compatible devices in the home network.

Page 35

FCC Draft

Define content for sharing

When you set Content sharing on, the other UPnP compatible devices in the home network can view and copy the files you want to share with them.

To select media files for sharing with other devices, or to view the sharing status of Images & video or Music albums, select Share content.

View media files

To connect a compatible PC to the home network, you must install the related software from the CD-ROM supplied with your Nokia N80.

If Content sharing is on in your device, the other UPnP compatible devices in the home network can view and copy the media files you have selected to share in Share

content. If you do not want the other devices to access

your files, set Content sharing off. Even if Content

sharing is off in your device, you can still view and copy

the media files stored in another home network device if it is allowed by the other device.

Show media files stored in your device

To select images, videos, and sound clips stored in your device, and show them in another home network device, such as a compatible TV, do the following:

1 In Gallery, select an image, a video clip, or a sound clip.

2 Select Options > Enable external. 3 Select a compatible device in which the media file is

shown. The images are shown both in the other home network device and your device, and the video clips and sound clips are played only in the other device.

Show media files stored in the other device

To select media files that are stored on another home network device, and show them in your device; or in a compatible TV, for example, do the following:

1 In Gallery, select Home network. Your device starts

the search of other compatible devices. Device names start to appear on the display.

2 Select a device from the list. 3 Select the type of media you want to view from the

other device. The available file types depend on the features of the other device.

4 Select the image, video clip, or music clip you want to

view, and select Options > Enable external (images and video) or Play via home network (music).

5 Select the device in which the file is shown.

To stop sharing the media file, select Options > Disable

external.

To print images saved in Gallery through Home network with a UPnP compatible printer, select the print option in

Gallery. See ‘Image print’, p. 38. Content sharing does not

have to be switched on.

Gallery

Page 36

FCC Draft

To search files with different criteria, select Options >

Find. To sort the found files, select Options > Sort by.

Gallery

Copy media files

To copy or transfer media files from your device to another compatible device, such as a UPnP compatible PC, select a file in Gallery, and Options >Organize> Copy to home

network or Move to home network. Content sharing

does not have to be switched on.

To copy or transfer files from the other device to your device, select a file in the other device, and Options >

Copy to phone or Copy to memory card. Content sharing does not have to be switched on.

Page 37

FCC Draft

Media applications

Music player

Press , and select Mus. plyr.. With the music player, you can play music files and create and listen to playlists.

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Add music

When you open the music player for the first time, the player searches the device memory for music files to create a music library.

After you add or remove music files in the device, update your music library. Select Options > Music library >

Options > Update Music library.

Tip! You can transfer music files from your device to

a compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.

Play music

When you open the music player, the previously played track or playlist is displayed. To view the music library, select or Options >

Music library and the

desired song list. To start playing the songs in the view, select Options > Play.

When a song is playing, to change between play and pause, press or .

To stop a song, press . To fast forward or rewind, press and hold or . To start playing the next or previous song, press or .

To view the currently played song list, select or

Options > Open 'Now playing'. To save the song list as a

playlist, select Options > Add to track list, and create a new playlist, or select a saved playlist.

To adjust the volume, press or .

Media applications

Page 38

FCC Draft

To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop.

Tip! To leave the application open and music playing

in the background, press twice to return to the standby mode. To return to the application, press , and select Mus. plyr..

Media applications

To open your Web bookmarks for downloading music, select Options > Track downloads.

To return to the standby mode and leave the music playing in the background, select Options > Play in

background.

Music library

To view the music library, select Options > Music library.

All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist,

genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.

To add songs, albums, artists, genres or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.

To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a

playlist you have created yourself, to add more songs, select Options > Add tracks.

To delete a playlist, press . Deleting a playlist only deletes the playlist, not the music files.

Image print

To print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer.

Use Image print to print your images using a data cable, wireless LAN (if available), Bluetooth connectivity, or a compatible memory card (if available).

You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpeg format.

Note: To print to a printer compatible with

PictBridge, connect the data cable before you select the print option.

Printer selection

When you use Image print for the first time, a list of available printers is displayed after you select the image. Select a printer. The printer is set as the default printer.

Page 39

FCC Draft

If you have connected a printer compatible with PictBridge using the CA-53 cable, the printer is automatically displayed.

If the default printer is not available, a list of available printing devices is displayed.

To change the default printer, select Options > Settings >

Default printer.

Print preview

The print preview view opens only when you start printing an image in the gallery.

The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.

Print settings

The available options vary, depending on the capabilities of the printing device you selected.

To set a default printer, select Options > Default printer.

To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.

RealPlayer

Press , and select Imaging > RealPlyr.. With RealPlyr., you can play video clips, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted).

Tip! You can also view video clips or streaming links

in your device with other compatible UPnP devices, such as a TV or a PC, through wireless LAN. See ‘View media files’, p. 35.

RealPlyr. supports files with extensions such as .3gp,

.mp4 or .rm. However, RealPlyr. does not necessarily support all file formats or all the variations of file formats. For example, RealPlyr. attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device.

Play video clips

1 To play a media file stored in device memory, or on the

memory card (if inserted), select Options > Open and from the following:

Most recent clips—to play one of the last six files

played in RealPlyr.

Media applications

Page 40

FCC Draft

Saved clip—to play a file saved in Gallery.

See ‘Gallery’, p. 31.

2 Scroll to a file, and press to play the file.

Tip! To view a video clip in full screen mode, press

. To change back to normal screen mode, press any

key.

Shortcuts during play:

• To fast forward, press and hold .

Media applications

• To rewind through the media file, press and hold .

• To mute the sound, press and hold until is displayed. To turn on the sound, press and hold until you see .

Stream content over the air

Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.

The access points may be configured when you first start your device.

Contact your service provider for more information.

Note: In RealPlyr., you can only open an rtsp:// URL

address. However, RealPlyr. recognizes an http link to a .ram file.

To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text

message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.

Receive RealPlayer settings

You may receive RealPlyr. settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 48. For more information, contact your network operator or service provider.

Change the RealPlayer settings

Select Options > Settings and from the following:

Video—to have RealPlyr. automatically repeat video clips

after they finish playing.

Connection—to select whether to use a proxy server,

change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.

Proxy sett.:

Use proxy—To use a proxy server, select Yes.

Proxy serv. address—Enter the IP address of the proxy

server.

Proxy port number—Enter the port number of the proxy

server.

Page 41

FCC Draft

Glossary: Proxy servers are intermediate servers between

media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips.

Netw. sett.:

Default access point—Scroll to the access point you want

to use to connect to the Internet, and press .

Online time—Set the time for RealPlyr. to disconnect from

the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK.

Lowest UDP port—Enter the lowest port number of the

server’s port range. The minimum value is 1024.

Highest UDP port—Enter the highest port number of the

server’s port range. The maximum value is 65535.

Select Options > Advanced settings to edit the bandwidth values for different networks.

Movie director

To create muvees, press , and select Imaging > Movie. muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created

automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.

Open Movie, and press or to move between the

and views. You can also return to the main

view from the view by selecting Done.

The view contains a list of video clips that you can

Play, Send, Rename, and Delete.

Create a quick muvee

1 In the Movie director main view, select Quick muvee. 2 Select a style for the muvee from the style list. The

created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving.

Create a custom muvee

1 In the Movie Director main view, select Custom

muvee.

2 Select the clips you want to include in your muvee in

Video, Image, Style, or Music.

After you select video clips and images, to define the order in which the files are played in the muvee, select

Options > Advanced options. To select the file you

Media applications

Page 42

FCC Draft

want to move, press . Then scroll to the file below which you want to place the marked file, and press

To cut the video clips, select Options > Select

contents. See ‘Select content’, p. 42.

In Message you can add an opening and closing text to a muvee.

3 Select Create muvee and from the following:

Media applications

Multimedia message—to optimize the length of the

muvee for MMS sending

Auto-select—to include all the selected pictures and

video clips in the muvee

Same as music—to set the muvee duration to be the

same as the chosen music clip

User defined—to define the length of the muvee

4 Select Options > Save.

To preview the custom muvee before saving it, in the

Preview view, select Options > Play.

To create a new custom muvee by using the same style settings, select Options > Recreate.

Select content

To edit the selected video clips, select Options >

Advanced options > Options > Select contents. You can

select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts.

To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select

Options > Exclude shot.

To let Movie director randomly include or exclude a part of the video clip, scroll to the part, and select Options >

Mark as neutral.

To let Movie director randomly include or exclude parts of video clip, select Options > Mark all as neutral.

Settings

Select Settings to edit the following options:

Memory in use—Select where to store your muvees.

Resolution—Select the resolution of your muvees.

Default muvee name—Set a default name for the muvees.

Page 43

FCC Draft

Messaging

Press , and select Messag. (network service). In

Messag., you can create, send, receive, view, edit, and

organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive Web service messages, cell broadcast messages, and send service commands. Messages and data received using Bluetooth connectivity or infrared are received in the Inbox folder in Messag..

To create a new message, select New message.

Note: Only devices that have compatible features

can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Messag. contains the following folders:

Inbox—Received messages, except e-mail and cell

broadcast messages, are stored here. E-mail messages are stored in the Mailbox.

My folders—Organize your messages into folders.

Tip! To avoid rewriting messages that you send often,

use texts in the templates folder.

Mailbox—Connect to your remote mailbox to

retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 53.

Drafts—Draft messages that have not been sent are

stored here.

Sent—The last 20 messages that have been sent,

excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see ‘Other settings’, p. 55.

Outbox—Messages waiting to be sent are temporarily

stored here.

Example: Messages are placed in the outbox, for

example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.

Reports—You can request the network to send you a

delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

Messaging

Page 44

FCC Draft

Tip! When you have opened any of the default

folders, to switch between the folders, press or .

To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options >

Messaging

Service command in the main view of Messag..

Cell broadcast (network service) allows you to receive

messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell

broadcast. In the main view, you can see the status of a

topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.

Write text

ABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.

Traditional text input

is displayed when you are writing text using

traditional text input.

• Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.

• If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter.

• To insert a space, press . To move the cursor to the next line, press three times.

Predictive text input

You can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. is displayed when you write text using predictive text input.

1 To activate predictive text input, press , and select

Predictive text on. This activates predictive text input

for all editors in the device.

2 To write the desired word,

press the keys — . Press each key only once for one letter. For example, to write "Nokia" when the English dictionary is selected, press for N, for o,

for k, for i, and for a.

Page 45

FCC Draft

The word suggestion changes after each keypress.

3 When you finish writing the word correctly, press

to confirm it, or press to add a space. If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one, or press , and select Predictive text >

Matches.

If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.

4 Start writing the next word.

Write compound words

Write the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.

Turn predictive text input off

To turn predictive text input off for all editors in the device, press , and select Predictive text > Off.

Tip! To turn predictive text input on or off, quickly

press twice.

Tips on text input

To insert a number in the letter mode, press and hold the desired number key.

To switch between the letter and number mode, press and hold .

To switch between the different character modes, press

To delete a character, press . To delete more than one character, press and hold .

The most common punctuation marks are available under

To open a list of special characters, press and hold .

Tip! To insert several special characters at the same

time, press when you select each character.

Write and send messages

The appearance of a multimedia message may vary, depending on the receiving device.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in

Messaging

Page 46

FCC Draft

place. See ‘Receive MMS and e-mail settings’, p. 47 and ‘E-mail’, p. 53.

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.

Messaging

1 Select New message and from the following:

Text msg.—to send a text message Multimedia message—to send a multimedia message

(MMS)

E-mail—to send an e-mail

If you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.

2 In the To field, press

to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.

3 In the Subject field, enter the subject of a multimedia

message or e-mail. To change the fields that are visible, select Options > Address fields.

4 In the message field, write the message. To insert a

template, select Options > Insert or Insert object >

Template.

5 To add a media object to a multimedia message, select

Options > Insert object > Image, Sound clip, or Video clip. When sound is added, is shown.

You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see ‘Video settings’, p. 28.

6 To take a new picture or record sound or video for a

multimedia message, select Insert new > Image,

Sound clip, or Video clip. To insert a new slide to the

message, select Slide. To see what the multimedia message looks like, select

Options > Preview.

7 To add an attachment to an e-mail, select Options >

Insert > Image, Sound clip, Video clip, or Note. E-mail

attachments are indicated by .

Tip! To send other file types as attachments, open

the appropriate application, and select Send > Via

e-mail, if available.

8 To send the message, select Options > Send, or press

Page 47

FCC Draft

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.

E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.

Tip! You can combine images, video, sound, and text

to a presentation and send it in a multimedia message. Start to create a multimedia message, and select

Options > Create presentation. The option is shown

only if MMS creation mode is set to Guided or Free. See ‘Multimedia messages’, p. 52.

Enter the MMS settings manually

1 Press , and select Tools > Settings > Connection >

Access points, and define the settings for a

multimedia messaging access point. See ‘Connection’, p. 95.

2 Press , and select Messaging > Options >

Settings > Multim. msg. > Access point in use and

the access point you created as the preferred connection. See also ‘Multimedia messages’, p. 52.

Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:

• Configure an Internet access point (IAP) correctly. See ‘Connection’, p. 95.

• Define your e-mail settings correctly. If you select

Mailbox in the Messag. main view and have not set up

your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 53. You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).

Receive MMS and e-mail settings

You may receive the settings in a message from your network operator or service provider. See ‘Data and settings’, p. 48.

In the Inbox folder, indicates an unread text message, an unread multimedia message, data

Inbox—receive messages

Messaging

Page 48

FCC Draft

received through infrared, and data received through Bluetooth connectivity.

When you receive a message, and 1 new message are shown in the standby mode. to open the message, select Show. To open a message in Inbox, scroll to it, and

Messaging

press .

To reply to a received message, select Options > Reply

To print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Multimedia messages

Important: Exercise caution when opening

messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.

You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.

When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included, or if video is included. To play the sound or the video, select the indicator.

To see the media objects that have been included in the multimedia message, select Options > Objects.

If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator.

Data and settings

Your device can receive many kinds of messages that contain data ( ):

Configuration message—You may receive settings from

your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all.

Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files

attached to the business card are not saved.

Ringing tone—To save the ringing tone, select Options > Save.

Operat. logo—To have the logo shown in the standby

mode instead of the network operator’s own identification, select Options > Save.

Calen. entry—To save the invitation, select Options > Save to Calendar.

Web message—To save the bookmark to the bookmarks

list in Web, select Options > Add to bookmarks. If the

Page 49

FCC Draft

message contains both access point settings and bookmarks, to save the data, select Options > Save all.

E-mail notif.—The note tells you how many new e-mails

you have in your remote mailbox. An extended notification may list more detailed information.

Web service messages

Web service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Open the mailbox

When you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).

To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also ‘Connection’, p. 95.

To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox.

Messaging

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 53.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Retrieve e-mail messages

If you are offline, select Options > Connect to start a connection to the remote mailbox.

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

1 When you have an open connection to a remote

mailbox, select Options > Retrieve e-mail and one of the following:

New—to retrieve all new e-mail messages Selected—to retrieve only the e-mail messages that

have been marked

All—to retrieve all messages from the mailbox

Page 50

FCC Draft

To stop retrieving messages, select Cancel.

2 After you retrieve the e-mail messages, you can

continue viewing them online, or select Options >

Disconnect to close the connection and view the

Messaging

e-mail messages offline. E-mail status indicators:

The new e-mail (offline or online mode) has not

been retrieved to your device.

The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not

been retrieved to your device.

The e-mail message has been read. The e-mail heading has been read and the

message content has been deleted from the device.

3 To open an e-mail message, press . If the e-mail

message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment indicator , and select Options >

Attachments. If the attachment has a dimmed indicator,

it has not been retrieved to the device; select Options >

Retrieve.

To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart

8150), select Options > Print.

Retrieve e-mail messages automatically

To retrieve messages automatically, select Options > E-

mail settings > Automatic retrieval > Header retrieval > Always on or Only in home net., and define when and

how often the messages are retrieved.

Retrieving e-mail messages automatically may increase your call costs due to the data traffic.

Delete e-mail messages

To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select

Options > Delete. In Delete msg. from:, select Phone only.

The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status.

To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.

If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox,

Page 51

FCC Draft

it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.

To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options >

Undelete.

Disconnect from the mailbox

When you are online, to end the data connection to the remote mailbox, select Options > Disconnect.

View messages on a SIM card

Before you can view SIM messages, you must copy them to a folder in your device.

1 In the Messag. main view, select Options > SIM

messages.

2 Select Options > Mark/Unmark > Mark or Mark all to

mark messages.

3 Select Options > Copy. A list of folders opens. 4 To start copying, select a folder and OK. To view the

messages, open the folder.

Messaging settings

Fill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.

Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.

Text messages

Press , and select Messag. > Options > Settings >

Text msg. and from the following:

Message centers—View a list of all text message centers

that have been defined.

Character encoding— To use character conversion to

another encoding system when available, select Reduced

support.

Msg. center in use—Select which message center is used

to deliver text messages.

Receive report—Select whether the network sends

delivery reports on your messages (network service).

Message validity—Select how long the message center

resends your message if the first attempt fails (network

Messaging

Page 52

FCC Draft

service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

Message sent as—Change this option only if you are sure

that your message center is able to convert text messages

Messaging

into these other formats. Contact your network operator.

Preferred conn.—Select the connection used for sending

text messages: GSM network or packet data, if supported by the network. See ‘Connection’, p. 95.

Reply via same ctr.—Select whether you want the reply

message to be sent using the same text message center number (network service).

Multimedia messages

Press , and select Messag. > Options > Settings >

Multimedia message and from the following:

Image size—Define the size of the image in a multimedia

message: Original (shown only when the MMS creation

mode is set to Guided or Free), Small, or Large.

MMS creation mode —If you select Guided, the device

informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.

Access point in use—Select which access point is used as

the preferred connection for the multimedia message center.

Multimedia retrieval—Select how you want to receive

multimedia messages. To receive multimedia messages automatically in your home network, select Aut. in home

network. Outside your home network, you receive a

notification that there is multimedia message that you can retrieve in the multimedia message center.

When you are outside your home network, sending and receiving multimedia messages may cost you more.

If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.

Allow anon. msgs.—Select whether you want to reject

messages from an anonymous sender.

Receive ads—Define whether you want to receive

multimedia message advertisements.

Receive report—Select whether you want the status of the

sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

Page 53

FCC Draft

Deny report sending—Select whether you want to deny

your device sending delivery reports of received multimedia messages.

Message validity—Select how long the message center

resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

E-mail

Press , and select Messag. > Options > Settings > E-

mail and from the following:

Mailboxes—Select a mailbox to change the following

settings: Connection settings, User settings, Retrieval

settings, and Automatic retrieval.

Mailbox in use— Select which mailbox you want to use for

sending e-mail.

To create a new mailbox, select Options > New mailbox in the mailbox main view.

Connection settings

To edit the settings for the e-mail you receive, select

Incoming e-mail and from the following:

User name—Enter your user name, given to you by your

service provider.

Password—Enter your password. If you leave this field

blank, you are prompted for the password when you try to connect to your remote mailbox.

Incoming mail serv.—Enter the IP address or host name of

the mail server that receives your e-mail.

Access point in use—Select an Internet access point (IAP).

See ‘Connection’, p. 95.

Mailbox name—Enter a name for the mailbox.

Mailbox type—Defines the e-mail protocol that your

remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.

Security (ports)—Select the security option used to

secure the connection to the remote mailbox.

Port—Define a port for the connection.

APOP secure login (for POP3 only)—Use with the POP3

protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.

To edit the settings for the e-mail you send, select

Outgoing e-mail and from the following:

Messaging

Page 54

FCC Draft

My e-mail address—Enter the e-mail address given to

you by your service provider. Replies to your messages are sent to this address.

Outgoing mail serv.—Enter the IP address or host name

of the mail server that sends your e-mail. You may only be

Messaging

able to use the outgoing server of your network operator. Contact your service provider for more information.

Access point in use—Select an Internet access point (IAP).

See ‘Connection’, p. 95.

The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.

User settings

My name—Enter your own name. Your name replaces

your e-mail address in the recipient’s device when the recipient’s device supports this function.

Send message—Define how e-mail is sent from your

device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select

During next conn., e-mail is sent when the connection to

the remote mailbox is available.

Send copy to self—Select whether you want to save a

copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.

Include signature—Select whether you want to attach a

signature to your e-mail messages.

New e-mail alerts—Select whether you want to receive

the new e-mail indications, a tone and a note, when new mail is received to the mailbox.

Retrieval settings

E-mail to retrieve—Define which parts of the e-mail are

retrieved: Headers only, Partially (kB), Messages (for IMAP4 only), or Msgs. & attachs..

Retrieval amount—Define how many new e-mail

messages are retrieved to the mailbox.

IMAP4 folder path (for IMAP4 only)—Define the folder

path for folders to be subscribed.

Folder subscriptions (for IMAP4 only)—Subscribe to other

folders in the remote mailbox and retrieve content from those folders.

Automatic retrieval

E-mail notifications—Select whether you want to receive

notifications when new e-mail is received in your remote mailbox.

E-mail notifications and automatic header retrieval cannot be active at the same time.

Header retrieval—Select whether you want the device to

retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.

Page 55

FCC Draft

Retrieving e-mail messages automatically may increase your call costs due to the data traffic.

Web service messages

Press , and select Messaging > Options > Settings >

Service message. Select whether you want to receive

service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.

Cell broadcast

Check the available topics and related topic numbers with your service provider. Press , and select Messaging >

Options > Settings > Cell broadcast and from the

following:

Reception—Select whether you want to receive cell

broadcast messages.

Language—Select the languages in which you want to

receive messages: All, Selected, or Other.

Topic detection—Select whether the device automatically

searches for new topic numbers, and saves the new numbers without a name to the topic list.

Other settings

Press , and select Messaging > Options > Settings >

Other and from the following:

Save sent messages—Select whether you want to save a

copy of the text messages, multimedia messages, or email that you send to the Sent folder.

No. of saved msgs.—Define how many sent messages are

saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.

Memory in use—If a memory card is inserted in the

device, select the memory where you want to save your messages: Phone memory or Memory card.

Messaging

Page 56

FCC Draft

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 48. Contact information can only be sent to or received from

Contacts (Phonebook)

compatible devices.

Save names and numbers

1 Select Options > New contact. 2 Fill in the fields that you want, and select Done.

To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit.

Tip! To print contact cards on a compatible Basic

Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete.

Tip! To add and edit contact cards, use Nokia Contacts

Editor available in Nokia PC Suite.

To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options >

Add thumbnail. The thumbnail image is shown when the

contact calls.

Tip! 1-touch dialing is a quick way to call frequently

used numbers. You can assign 1-touch dialing keys to eight phone numbers. See ‘1-touch dial a phone number’, p. 60.

Tip! To send contact information, select the card you

want to send. Select Options > Send > Via text

message, Via multimedia, Via Bluetooth, or Via infrared. See ‘Messaging’, p. 43 and ‘Send data using

Bluetooth connectivity’, p. 82.

To add a contact to a group, select Options > Add to

group: (shown only if you have created a group). See

‘Create contact groups’, p. 58.

To view the amount of contacts, groups, and the available memory in Contacts, select Options > Memory details.

Page 57

FCC Draft

Primary numbers and addresses

You can assign primary numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The primary number is also used in voice dialing.

1 In the address book, select a contact, and press . 2 Select Options > Defaults. 3 Select a default to which you want to add a number or

an address, and select Assign.

4 Select a number or an address you want to set as a

default.

The primary number or address is underlined in the contact card.

Copy contacts

To copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM

contacts > SIM directory. Select the names you want to

copy and Options > Copy to Contacts.

To copy contacts to your SIM card, press , and select

Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by

your SIM card are copied.

Tip! You can synchronize your contacts to a

compatible PC with Nokia PC Suite.

SIM directory and other SIM services

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Press , and select Contacts > Options > SIM

contacts > SIM directory to see the names and numbers

stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.

To view the list of fixed dialing numbers, select Options >

SIM contacts > Fixed dialing contacts. This setting is

only shown if supported by your SIM card.

To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialing. To add new numbers to the fixed dialing list, select Options >

New SIM contact. You need the PIN2 code for these

functions.

When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.

Contacts (Phonebook)

Page 58

FCC Draft

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Add ringing tones for contacts

When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).

Contacts (Phonebook)

1 Press to open a contact card or go to the groups

list, and select a contact group.

2 Select Options > Ringing tone. A list of ringing tones

opens.

3 Select the ringing tone you want to use for the

individual contact or the selected group.

You can also use a video clip as a ringing tone.

To remove the ringing tone, select Default tone from the list of ringing tones.

4 Open the group, and select Options > Add members. 5 Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all the contacts you want to add.

6 Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the new name, and select OK.

Remove members from a group

1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove

from group.

3 Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs,

scroll to the contact, and select Options > Belongs to

groups.

Create contact groups

1 In Contacts, press to open the groups list. 2 Select Options > New group. 3 Write a name for the group or use the default name

Group %N, and select OK.

Page 59

FCC Draft

Make calls

Voice calls

Tip! To inc rease o r decre ase the volume dur ing a ca ll,

press or . If you have set the volume to Mute, select Unmute first, and then press or .

1 In the standby mode, enter the phone number,

including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2 Press to call the number. 3 Press to end the call (or to cancel the call attempt).

Pressing always ends a call, even if another application is active.

Tip! If you want to close the sliding keypad during a

call but not end the call, press and then close the sliding keypad within few seconds.

To make a call from Contacts, press , and select

Contacts. Scroll to the desired name, or enter the first

letters of the name to the search field. Matching contacts are listed. To call, press . Select the call type Voice call.

You must copy the contacts from your SIM card to

Contacts before you can make a call this way. See ‘Copy

contacts’, p. 57.

To call your voice mailbox (network service), press and hold in the standby mode. See also ‘Call forwarding’, p. 102.

Tip! To change the phone number of your voice

mailbox, press , and select Tools > Voic. mail >

Options > Change number. Enter the number

(obtained from your service provider), and select OK.

To call a recently dialed number in the standby mode, press . Scroll to the number, and press .

Make a conference call

1 Make a call to the first participant. 2 To make a call to another participant, select Options >

New call. The first call is automatically put on hold.

3 When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference.

Make calls

Page 60

FCC Draft

Your device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private.

Make calls

Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select

Options > Add to conference to return to the

conference call. To drop a participant, select Options > Conference >

Drop participant, scroll to the participant, and select Drop.

4 To end the active conference call, press .

1-touch dial a phone number

To activate 1-touch dialing, press , and select Tools >

Settings > Call > 1-touch dialing> On.

To assign a phone number to one of the 1-touch dialing keys ( — ), press , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox.

To call in the standby mode, press the 1-touch dial key and .

Voice dialing

Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.

The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play

voice tag.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.

1 To start voice dialing, in the standby mode, press and

hold the right selection key. If you are using a compatible headset with the headset key, press and hold the headset key to start voice dialing.

Page 61

FCC Draft

2 A short tone is played, and Speak now is displayed. Say

clearly the name or nickname that is saved on the contact card.

3 The device plays a synthesized voice tag for the

recognized contact in the selected device language, and displays the name and number. After a timeout of

2.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing.

If several numbers are saved under the name, the device selects the primary number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (work),

Telephone, Tel. (home), and Tel. (work).

Video calls

When you make a video call (network service), you can see a real-time, two-way video between you and the recipient of the call. The live video image, or video image captured by the camera in your device is shown to the video call recipient.

To be able to make a video call, you must have a USIM card and be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider.

A video call can only be made between two parties. The video call can be made to a compatible mobile device or an ISDN client. Video calls cannot be made while another voice, video, or data call is active.

Icons:

You are not receiving video (the recipient is not

sending video or the network is not transmitting it).

You have denied video sending from your device. To

send a still image instead, see ‘Call settings’, p. 94.

Note: Even if you denied video sending during a

video call, the call is still be charged as a video call. Check the pricing with your network operator or service provider.

1 To start a video call,

enter the phone number in the standby mode, or select

Contacts and a

contact.

2 Select Options > Call

> Video call.

Starting a video call may take a while. Waiting for

video image is shown. If

the call is not successful (for example, video calls are not supported by the network,

Make calls

Page 62

FCC Draft

or the receiving device is not compatible) you are asked if you want to try a normal call or send a text message instead.

The video call is active when you see two video images, and hear the sound through the loudspeaker. The call

Make calls

recipient may deny video sending ( ), in which case you only hear the sound and may see a still image or a grey background graphic.

To change between showing video or hearing only sound, select Enable/Disable > Sending video, Sending audio or

Sending audio & video.

To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display.

To switch the places of the sent video images on the display, select Change image order.

To end the video call, press .

Video sharing

Use Video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. Simply invite a recipient to view the live video or a video clip you want to share. Sharing begins automatically when the recipient accepts the invitation.

The loudspeaker is active when you activate Video

sharing. You can also use a compatible headset to

continue your voice call while you share video. When a voice call is active, select Options > Share video > Live or

Clip.

To end video sharing, select Stop. Video sharing also ends if the active voice call ends.

Video sharing requirements

Because Video sharing requires a UMTS connection, your ability to use Video sharing depends on the UMTS network availability. Contact your service provider for more information on the service and network availability, and fees associated with using this service.

To use Video sharing you must:

• Ensure that Video sharing is installed on your Nokia

device.

• Ensure that your device is set up for person-to-person connections. See ‘Settings’, p.63.

• Ensure you have an active UMTS connection and are within UMTS network coverage. See ‘Settings’, p. 63. If you start the sharing session while you are within UMTS network coverage and a handover to GSM occurs, the sharing session is discontinued, but your voice call continues. Starting Video sharing is not

Page 63

FCC Draft

possible when you are not within UMTS network coverage (for example, in a GSM network).

• Ensure that both the sender and recipient are registered to the UMTS network. If you invite someone to a sharing session and the recipient’s device is turned off, is not within UMTS network coverage, or does not have Video sharing installed or person-to-person connections set up, the recipient does not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation.

Settings

Person-to-person connection settings

A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use

Video sharing. Setting up a SIP profile allows you to

establish a live person-to-person connection to another compatible device. The SIP profile must also be established to receive a sharing session.

Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air or give you a list of the needed parameters.

If you know a recipient’s SIP address, you can enter it on the person’s contact card. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options > Add detail >

SIP or Share view (the correct option depends on the

network operator). Enter the SIP address in the format username@domainname (you can use an IP address instead of a domain name).

If you do not know a SIP address for the contact, you can also use the already saved phone number of the recipient including the country code, for example +358, to share video. If the phone number saved in Contacts does not include the country code, you can enter the number including the country code when sending the invitation.

UTMS connection settings

To set up your UMTS connection, do the following:

• Contact your service provider to establish an agreement for you to use the UMTS network.

• Ensure that your device UMTS access point connection settings are configured properly. For help, see ‘Connection’, p. 95.

Share live video and video clips

To receive a sharing session, the recipient must install

Video sharing and configure the required settings on their

compatible mobile device. You and the recipient must

Make calls

Page 64

FCC Draft

both be registered to the service before you can start sharing.

1 During an active voice call, select Options > Share

video > Live or Clip.

Make calls

If you selected Clip, a list of video clips opens. Select a video clip you want to share and Options > Send

invitation.

2 If the recipient has several SIP addresses in the

contacts list, select the SIP address to which you want to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. If you do not know a SIP address for the contact, enter the phone number of the recipient including the country code, if it is not already saved in the Contacts.

3 Sharing begins automatically when the recipient

accepts the invitation.

4 Select Pause to pause the sharing session. Select

Continue to resume sharing. If you share a video clip,

to rewind and fast forward the clip, scroll left or right.

5 To end video sharing, select Stop or close the camera

slider. Video sharing also ends if the active voice call ends.

Accept an invitation

When someone sends you a share invitation, an invitation message is displayed showing the sender’s name or SIP

address. If your device is not set to Silent, it rings when you receive an invitation.

If someone sends you a share invitation and your device is turned off or you are not within UMTS network coverage, you will not know that you received an invitation.

When you receive an invitation, select from the following:

Accept—to activate the sharing session.

Reject—to decline the invitation. The sender receives a

message that you rejected the invitation. You can also press the end key to decline the sharing session and disconnect the voice call.

To end video sharing, select Stop. Video sharing also ends if the active voice call ends.

Answer or decline a call

To answer the call, press .

To mute the ringing tone when a call comes in, select

Silence.

If you do not want to answer a call, press . If you have activated the Call forward > If busy function to forward calls, declining an incoming call also forwards the call. See ‘Call forwarding’, p. 102.

When you decline an incoming call, you can send a text message to the caller informing why you cannot answer

Page 65

FCC Draft

the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 94.

Answer or decline a video call

When a video call arrives, is displayed.

Tip! You can assign a ringing tone for video calls.

Press and select Profiles.

Press to answer the video call. Allow video image to

be sent to caller? appears on the display. To start sending

live video image, select Yes.

If you do not activate the video call, video sending is not activated, and you only hear the sound of the caller. A grey screen is shown in place of the video image. To replace the grey screen with a still image captured by the camera in your device, see ‘Call settings’, Image in video call, p. 94.

To end the video call, press .

Call waiting (network service)

You can answer a call while you have another call in progress if you have activated Call waiting in Tools >

Settings > Call > Call waiting.

Tip! To change the device tones for different

environments and events, for example, when you want your device to be silent, see ‘Profiles—set tones’, p. 90.

To answer the waiting call, press . The first call is put on hold.

To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options >

Transfer. To end the active call, press . To end both

calls, select Options > End all calls.

Options during a voice call

Many of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer,

Decline, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible

headset with Bluetooth connectivity is attached), End

active call or End all calls, New call, Conference, Transfer, and Open active standby. Select from the

following:

Replace—to end an active call and replace it by answering

the waiting call.

Send MMS (in UM TS netw ork s only) —to send an ima ge o r

a video in a multimedia message to the other participant of the call. You can edit the message and change the recipient before sending. Press to send the file to a compatible device (network service).

Make calls

Page 66

FCC Draft

Send touch tones—to send touch tone strings, for

example, a password. Enter the touch tone string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone.

Make calls

Tip! You can add touch tones to the Phone number

or Touch tones fields in a contact card.

calls only if the network supports these functions, the device is switched on, and within the network service area.

To clear all recent call lists, select Options > Clear recent

calls in the recent calls main view. To clear one of the call

logs, open the register you want to erase, and select

Options > Clear list. To clear an individual event, open a

Options during a video call

Select Options during a video call for the following options: Enable or Disable (video, audio, or both),

Activate handset (if a compatible headset with Bluetooth

connectivity is attached) or Activate handsfree (when a compatible headset with Bluetooth connectivity is attached), Activate loudsp., End active call, Open active

standby, Use main camera/Use secondary camera, Change image order, Zoom in/Zoom out, and Help.

The available options may vary.

Log

To monitor the phone numbers of missed, received, and dialed voice calls, press , and select My own > Log>

Recent calls. The device registers missed and received

Call timers

To monitor the approximate duration of your incoming and outgoing calls, press , and select My own > Log> Call

timers.

To set the display of the call timers while a call is active, select My own > Log> Options > Settings > Show call

duration > Yes or No.

Note: The actual time invoiced for calls by your

service provider may vary, depending on network features, rounding off for billing, and so forth.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code. See ‘Phone and

SIM’, p. 99.

Packet data

To check the amount of data sent and received during packet data connections, press , and select My own >

Page 67

FCC Draft

Log > Packet data. For example, you may be charged for

your packet data connections by the amount of data sent and received.

Monitor all communication events

Icons in Log:

Incoming Outgoing Missed communication

events

To monitor all voice calls, text messages, or data and wireless LAN connections registered by the device, press , select My

own> Log, and scroll right to

open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event, and create new contact cards based on the log information.

Tip! To view a list of sent messages, press , and

select Messaging > Sent.

Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox,

multimedia messaging center, or Web pages are shown as packet data connections.

To add an unknown phone number from Log to your contacts, select Options > Add to contacts.

To filter the log, select Options > Filter and a filter.

To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options >

Clear log. Select Yes to confirm. To remove a single event

from the log, press .

To set the Log duration, select Options > Settings > Log

duration. The log events remain in the device memory for

a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.

To view the details of a communication event, in the general log view scroll to an event, and press .

Tip! In the details view you can copy a phone number

to the clipboard, and paste it to a text message, for example. Select Options > Copy Number.

Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select

Options > View details.

Make calls

Page 68

FCC Draft

Services

Press , and select Services (network service).

Various service providers maintain pages specifically designed for mobile devices that you can view with the

Services browser. These pages use the wireless markup

language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Shortcut: To start a connection, press and hold

in the standby mode.

Access point

To access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the page. See ‘Data and settings’, p. 48. For more information, contact your network operator or service provider.

Tip! Settings may be available on the Web site of a

network operator or service provider.

Enter settings manually

1 Press , select Tools > Settings > Connection >

Access points, and define the settings for an access

point. Follow the instructions given to you by your service provider. See ‘Connection’, p. 95.

2 Press , and select Services > Options > Bookmark

manager > Add bookmark. Write a name for the

bookmark and the address of the page defined for the current access point.

3 To set the created access point as the default access

point, select Options > Settings > Access point.

Bookmarks view

The bookmarks view opens when you open Services.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

indicates the starting page defined for the default

access point.

Page 69

FCC Draft

Connection security

If the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.

Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also ‘Certif. management’, p. 101.

Browse

Important: Use only services that you trust and that

offer adequate security and protection against harmful software.

To download a page, select a bookmark, or enter the address in the field ( ).

On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.

To open links and make selections, press .

Shortcut: Use to jump to the end of a page and

to the beginning of a page.

To go to the previous page while browsing, select Back. If

Back is not available, select Options > Navigation options > History to view a chronological list of the pages

you visited during a browsing session.

To retrieve the latest content from the server, select

Options > Navigation options > Reload.

To save a bookmark, select Options > Save as bookmark.

Tip! To access the bookmarks view while browsing,

press and hold . To return to the browser view, select Options > Back to page.

To save a page while browsing, select Options >

Advanced options > Save page. You can save pages to

the device memory or compatible memory card (if inserted), and browse them when offline. To access the pages later, press in the bookmarks view to open the

Saved pages view.

To enter a new URL address, select Options > Navigation

options > Go to web address.

Services

Page 70

FCC Draft

To open a sublist of commands or actions for the currently open page, select Options > Service options.

You can download files that cannot be shown on the

Services

browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press .

When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting

Options > Tools > Downloads. In the list, scroll to an

item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads.

Download and purchase items

You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in

Gallery.

Important: Only install and use applications and

other software from sources that offer adequate security and protection against harmful software.

1 To download the item, scroll to the link, and press .

2 Select the appropriate option to purchase the item, for

example, “Buy”.

3 Carefully read all the information provided.

To continue the download, select Accept. To cancel the download, select Cancel.

End a connection

To end the connection and view the browser page offline, select Options > Advanced options > Disconnect, or to end the connection and close the browser, select

Options > Exit.

Empty the cache

The information or services you have accessed are stored in the cache memory of the device.

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache.

Settings

Select Options > Settings and from the following:

Page 71

FCC Draft

Access point—Change the default access point. See

‘Connection’, p. 95. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.

Load imgs. & sounds—Select whether you want to load

images while browsing. If you select No, to load images later during browsing, select Options > Show images.

Font size—Select the text size.

Default encoding—If text characters are not shown

correctly, you can select another encoding according to language.

Auto. bookmarks—Enable or disable automatic bookmark

collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.

Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.

Homepage—Define the home page.

Search page—Define a Web page that is downloaded

when you select Navigation options > Open search page in the bookmarks view, or when browsing.

Volume—If you want the browser to play sounds

embedded on Web pages, select a volume level.

Rendering—If you want the page layout shown as

accurately as possible when in Small screen mode, select

By quality. If you do not want external cascading style

sheets to be downloaded, select By speed.

Cookies—Enable or disable the receiving and sending of

cookies.

Java/ECMA script—Enable or disable the use of scripts.

Security warnings—Hide or show security notifications.

Confirm touch tones—Select whether you want to

confirm before the device sends touch tones during a voice call. See also ‘Options during a voice call’, p. 65.

Services

Page 72

FCC Draft

Calendar

Use Calendar to remind you of meetings and

Calendar

anniversaries, and to keep track of your tasks and other notes.

Create calendar entries

Shortcut: In the day, week, or month calendar view,

press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.

1 Press , and select

Calendar > Options > New entry and one of

the following:

Meeting—to remind you

of an appointment that has a specific date and time

Memo—to write a

general entry for a day

Anniversary—to remind

you of birthdays or special dates (entries are repeated every year)

To-do—to remind you of a task that needs doing by a

specific date

2 Fill in the fields. To set an alarm, select Alarm > On,

and enter the Alarm time and Alarm date. To add a description for an appointment or a meeting, select Options > Add description.

3 To save the entry, select Done.

When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze.

Tip! You can synchronize your calendar with a

compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronization option.

Calendar views

Tip! Select Options > Settings to change the starting

day of the week or the view that is shown when you open the calendar.

In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before

Page 73

FCC Draft

8 a.m. To switch between the month view, week view, day view, and to-do view, press .

To go to a certain date, select Options > Go to date. To jump to today, press .

To send a calendar note to a compatible device, select

Options > Send.

To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart

8150), select Options > Print.

Manage your calendar entries

Deleting past entries in Calendar saves space in your device memory.

To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or

All entries.

To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done.

Calendar settings

To modify the Calendar alarm tone, Default view, Week

starts on, and Week view title, select Options > Settings.

Calendar

Page 74

FCC Draft

My own

Press , and select My own > Radio. You can use the application as a traditional FM radio with automatic tuning and saved stations, or with parallel visual information related to the radio program on the display, if you tune to stations that offer Visual Radio service. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.

If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries.

You can normally make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call.

The radio selects the used frequency band based on the country information received from the network. If this information is not available, you may be asked to select the region you are located in, or you can select the region in the Visual Radio settings. See ‘Settings’, p. 75.

Visual Radio

Listen to the radio

Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.

The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.

Press , and select My own > Radio. To start a station search, select or . To change the frequency manually, select Options > Manual tuning.

If you have previously saved radio stations, select or

to go to the next or previous saved station, or press the corresponding number key to select the memory location of a station.

To adjust the volume, press or . To listen to the radio using the loudspeaker, select Options > Activate

loudspeaker.

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Page 75

FCC Draft

To view available stations based on location, select

Options > Station directory (network service).

To save the current tuned station to your station list, select

Options > Save station. To open the list of your saved

stations, select Options > Stations.

To return to the standby mode and leave the FM radio playing in the background, select Options > Play in

background.

View visual content

To check availability and costs, and to subscribe to the service, contact your network operator or service provider.

To view available visual content for a tuned station, select

or Options > Start visual service. If the visual service

ID has not been saved for the station, enter it, or select

Retrieve to search for it in the station directory (network

service).

When the connection to the visual service is established, the display shows the current visual content.

To adjust display settings for the visual content view, select Options > Display settings.

Saved stations

You can save up to 20 radio stations in the radio. To open your station list, select Options > Stations.

To listen to a saved station, select Options > Station >

Listen. To view available visual content for a station with

Visual Radio service, select Options > Station > Start

visual service.

To change station details, select Options > Station >

Edit.

Settings

Select Options > Settings and from the following:

Start-up tone—Select whether a tone is played when the

application is started.

Auto-start service—Select Yes to have the Visual Radio

service start automatically when you select a saved station that offers visual service.

Access point—Select the access point used for the data

connection. You do not need an access point to use the application as an ordinary FM radio.

Current region—Select the region you are currently

located in. This setting is displayed only if there was no network coverage when the application was started.

Go to—add shortcuts

Press , and select My own > Go to.

My own

Page 76

FCC Draft

Default shortcuts are the following: opens Calendar,

opens Inbox, and opens Notes.

You can also enter the settings manually. See ‘Instant messaging server settings’, p. 78.

My own

Press , and select My own > IM.

Instant messaging (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features.

Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or

Record. chats to view a previous instant messaging

session that you saved.

IM—instant messaging

Receive IM settings

You must save the settings to access the service that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the IM service. See ‘Data and settings’, p. 48.

Connect to an IM server

1 To connect to the IM server in use, open IM, and select

Options > Login. To change the IM server in use and

save new IM servers, see ‘Instant messaging server settings’, p. 78.

2 Enter your user ID and password, and press to log

in. You obtain the user ID and password for the IM server from your service provider.

3 To log out, select Options > Logout.

Modify your IM settings

Select Options > Settings > IM settings and from the following:

Use screen name (shown only if IM groups are supported

by the server)—To enter a nickname, select Yes.

IM presence—To allow others to see if you are online,

select Active for all.

Allow msgs. from—To allow messages from all, select All.

Allow invitats. from—To allow invitations only from your

IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups.

Page 77

FCC Draft

Msg. scrolling speed—Select the speed at which new

messages are displayed.

Sort IM contacts—Select how your IM contacts are

sorted: Alphabetically or By online status.

Availabil. reloading—To select how to update information

about whether your IM contacts are online or offline, select Automatic or Manual.

Offline contacts—Select whether IM contacts with an

offline status are shown in the IM contacts list.

Own message color—Select the color of the instant

messages you send.

Received msg color—Select the color of the instant

messages you receive.

IM alert tone—Change the tone played when you receive

a new instant message.

Search for IM groups and users

To search for groups, in the IM groups view, select

Options > Search. You can search by Group name, Topic,

and Members (user ID).

To search for users, in the IM contacts view, select

Options > New IM contact > Search from server. You

can search by User's name, User ID, Phone number, and

E-mail address.

Join IM groups

The IM groups view shows a list of the IM groups that you have saved or are currently joined to.

To join a saved IM group, press .

To leave the IM group, select Options > Leave IM group.

Instant messaging

After you join an IM group, you can view the messages that are exchanged there, and send your own messages.

To send a message, write the message in the message editor field, and press .

To send a private message to a participant, select

Options > Send private msg..

To reply to a private message sent to you, select the message and Options > Reply.

To invite IM contacts who are online to join the IM group, select Options > Send invitation.

To prevent receiving messages from certain participants, select Options > Blocking options.

Record chats

To record the messages that are exchanged during a conversation or while you are joined in a IM group, select

Options > Record chat. To stop recording, select

My own

Page 78

FCC Draft

Options > Stop recording. To view the recorded chats, in

the main view, select Record. chats.

View and start conversations

My own

The Conversations view shows a list of the individual conversation participants that you have an ongoing conversation with. Ongoing conversations are automatically closed when you exit IM.

To view a conversation, scroll to a participant, and press

To continue the conversation, write your message, and press .

To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation.

To start a new conversation, select Options > New

conversation.

To save a conversation participant to your IM contacts, select Options > Add to IM contacts.

To send automatic replies to incoming messages, select

Options > Set auto reply on. You can still receive

messages.

IM contacts

In the IM contacts view, you can retrieve instant messaging contact lists from the server, or add a new instant messaging contact to a contact list. When you log in to the server, the previously used instant messaging contact list is retrieved from the server automatically.

Instant messaging server settings

Select Options > Settings > Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the instant messaging service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider.

Servers—View a list of all defined IM servers.

Default server—Change the IM server to which you want

to connect.

IM login type—To log in automatically when you start IM,

select On app. start-up.

To add a new server to your list of IM servers, select

Servers > Options > New server. Enter the following

settings:

Server name—the name for the instant messaging server

Page 79

FCC Draft

Access point in use—the access point you want to use for

the server

Web address—the URL address of the IM server

User ID—your user ID

Password—your login password

Games

Press , and select My own and a game. For instructions on how to play the game, select Options > Help.

My own

Page 80

FCC Draft

Connectivity

Bluetooth connectivity

Connectivity

You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); connect to a compatible printer to print images with Image print. See ‘Image print’, p. 38.

Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Basic Printing Profile, Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File

Transfer Profile, Basic Imaging Profile, SIM Access profile, and Human Interface Device Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Glossary: A profile corresponds to a service or a

function, and defines how different devices connect. For example, the Handsfree Profile is used between the handsfree device and the phone. For devices to be compatible, they must support the same profiles.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

When the device is locked, you cannot use Bluetooth connectivity. See ‘Security’, p. 99 for more information on locking the device.

Page 81

FCC Draft

Settings

Press , and select Connect. > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to

Shown to all, your device and this name can be seen by

other users with devices using Bluetooth technology.

Select from the following:

Bluetooth—Select On or Off. To connect wirelessly to

another compatible device, first set Bluetooth connectivity

On, then establish a connection.

My phone's visibility—To allow your device to be found by

other devices with Bluetooth technology, select Shown to

all. To hide it from other devices, select Hidden.

My phone's name—Edit the name of your device.

Remote SIM mode—To enable another device, such as a

compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.

Remote SIM mode

To use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When

pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 82. Activate the remote SIM mode from the other device.

When remote SIM mode is on in your Nokia N80, Remote

SIM is displayed in the standby mode. The connection to

the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage. However, a wireless LAN connection remains active during the remote SIM mode.

When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first.

To leave the remote SIM mode, press the power key, and select Exit rem. SIM mode.

Security tips

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility > Hidden.

Do not pair with an unknown device.

Connectivity

Page 82

FCC Draft

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same

Connectivity

time.

Bluetooth connectivity indicators

• When is shown in the standby mode, Bluetooth connectivity is on.

• When is blinking, your device is trying to connect with another device.

• When is shown continuously, data is being transmitted using Bluetooth connectivity.

Tip! To send text using Bluetooth connectivity, open

Notes, write the text, and select Options > Send > Via Bluetooth.

1 Open the application where the item you want to send

is stored. For example, to send an image to another compatible device, open Gallery.

2 Select the item and Options > Send > Via Bluetooth.

Devices with Bluetooth technology within range start to appear on the display. Device icons: computer, phone, audio or video device, and other device. To interrupt the search, select Stop.

3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 82.

5 When the connection has been established, Sending

data is shown.

The Sent folder in Messag. does not store messages sent using Bluetooth connectivity.

Tip! When searching for devices, some devices may

show only the unique address (device address). To find the unique address of your device, enter the code

*#2820# in the standby mode.

Pair devices

To open the paired devices view ( ), in the Bluetooth application main view, press .

Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.

To pair with a device, select Options > New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view.

Page 83

FCC Draft

Paired devices are indicated by in the device search.

To set a device as authorized or unauthorized, scroll to a device, and select from the following options:

Set as authorized—Connections between your device and

this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.

indicates authorized devices in the paired devices view.

Set as unauthorized—Connection requests from this

device must be accepted separately every time.

To cancel a pairing, scroll to the device, and select

Options > Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device and

delete the pairing with that device, pairing is removed immediately, and the connection is switched off.

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received

through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 47.

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select Bluetooth >

Off.

Infrared connection

With infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.

Send and receive data using infrared

1 Make sure that the infrared ports of the sending and

receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet).

2 The user of the receiving device activates the infrared

port.

Connectivity

Page 84

FCC Draft

To activate the infrared port of your device to receive data through infrared, press , and select

Connect. > Infrared.

3 The user of the sending device selects the desired

infrared function to start the data transfer.

Connectivity

To send data through infrared, locate the desired file in an application or the file manager, and select

Options > Send > Via infrared.

If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.

All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by .

When blinks, your device is trying to connect to the other device or a connection has been lost.

When is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.

Data cable

Press , and select Connect. > Data cbl.. In Data cable

mode, select what the USB data cable connection is used

for: PC Suite or Data transfer. To have the device ask the

purpose of the connection each time the cable is connected, select Ask on connection.

PC connections

You can use your device with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, transfer images between your device and a compatible PC.

Always create the connection from the PC to synchronize with your device.

Your device as a modem

You can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable (network service). Detailed installation instructions can be found in the user guide for Nokia PC Suite.

Tip! When using Nokia PC Suite for the first time, to

connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite.

Page 85

FCC Draft

Connection manager

Press , and select Connect. > Conn mgr. To view the status of data connections or end connections in GSM and UMTS network and wireless LAN, select Act. data conn.. To search for wireless LANs available within range, select

Availab. WLAN.

networks with encryption, and if your device has an active connection in the network.

To view the details of a network, select Options > Details.

To create an Internet access point in a network, select

Options > Define access point.

Synchronization

Connectivity

Data connections

In the active connections view, you can see the open data connections: data calls ( ), packet data connections ( or ), and wireless LAN connections ( ).

Note: The actual time invoiced for calls by your

service provider may vary, depending on network features, rounding off for billing, and so forth.

To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.

To view the details of a connection, select Options >

Details. The details shown depend on the connection type.

Wireless LAN

The available wireless LAN view shows a list of wireless LANs within range, their network mode (Infrastructure or

Ad-hoc), and signal strength indicator. is shown for

Press , and select Connect. > Sync. Sync enables you to synchronize your notes, calendar, contacts, or e-mail with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.

The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.

You may receive synchronization settings in a special text message. See ‘Data and settings’, p. 48.

Synchronize data

In the Sync main view, you can see the different synchronization profiles.

Page 86

FCC Draft

1 Select a synchronization profile and Options >

Synchronize. The status of the synchronization is

shown on the display. To cancel synchronization before it finishes, select

Cancel.

2 You are notified when the synchronization is

Connectivity

complete. Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server.

Device manager

Press , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.

To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options >

Start configuration.

Server profile settings

Contact your service provider for the correct settings.

Server name—Enter a name for the configuration server.

Server ID—Enter the unique ID to identify the

configuration server.

Server password—E nt er a pa ss word t o i denti fy your de vice

to the server.

Access point—Select an access point to be used when

connecting to the server.

Host address—Enter the URL address of the server.

Port—Enter the port number of the server.

User name and Password—Enter your user name and

password.

Allow configuration—To receive configuration settings

from the server, select Yes.

Auto-accept all reqs.—If you want your device to ask for

confirmation before accepting a configuration from the server, select No.

Network authentic.—Select if network authentication is

used.

Page 87

FCC Draft

Office

Calculator

To add, substract, multiply, divide, and calculate square roots and percentages, press , and select Office >

Calculator.

Note: This calculator has limited accuracy and is

designed for simple calculations.

Office

Set base currency and exchange rates

Select Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1.

Note: When you change base currency, you must

enter new exchange rates because all previously set exchange rates are cleared.

Converter

To convert measures from one unit to another, press , and select Office > Converter.

Converter has limited accuracy, and rounding errors may

occur.

1 In the Type field, select the measure you want to use. 2 In first Unit field, select the unit from which you want

to convert. In the next Unit field, select the unit to which you want to convert.

3 In the first Amount field, enter the value you want to

convert. The other Amount field changes automatically to show the converted value.

To write notes, press , and select Office > Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes.

To print a note on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select

Options > Print.

Notes

Page 88

FCC Draft

Recorder

Office

To record voice memos, press , and select Office >

Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone

every 5 seconds during recording.

Quickoffice

To use the Quickoffice applications, press , and select

Office > Quickoffice. A list of files in the .doc, .xls, .ppt,

and .txt file formats saved in the device opens.

To open a file in its respective application, press . To sort files, select Options > Sort files.

To open Quickword, Quicksheet, or Quickpoint, press to reach the desired view.

Quickword

With Quickword, you can view native Microsoft Word documents on the display of your device. Quickword supports colors, bold, italics, and underline.

Quickword supports the viewing of documents saved in

.doc format in Microsoft Word 97, 2000, and XP, and Palm

eBooks in .doc format. Not all variations or features of the mentioned file formats are supported.

Microsoft RM-92 User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual