Microsoft CR 200 User Manual

Nokia Wireless Charging Car Holder CR-200 User Guide

Issue 1.0

2 About your wireless charging car holder

About your wireless charging car holder

With the Nokia Wireless Charging Car Holder CR-200, you can access and charge your
compatible phone easily at all times. Just put your phone in the holder, and the
charging starts immediately.

Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
info stored on them may be erased.

The surface of this product is nickel-free.

Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.

About Qi

Qi is a global standard that makes wireless charging possible for your device. With a
Qi-compatible device, you don't need to connect any cables between the device and
the charger. You just place your device on the charging surface.

Qi works using magnetic induction, and is currently designed for devices that use 5
watts of power or less, such as mobile phones. Qi chargers and devices use the same
frequency. As long as their charging areas are touching, all Qi products are
compatible, regardless of manufacturer or brand. For more details, see the user
guides of both devices.

© 2013 Nokia. All rights reserved.

Parts

1 Clamp release button
2 Mount locking lever
3 Suction cup
4 Connector for power cable
5 Charger indicator light
6 Near Field Communication (NFC) area
7 Cable opening
8 Clamps
9 Power cable
10 Power supply
11 Power indicator light
12 USB connector
13 Cable clip
14 Mounting plate (may be available separately)
15 Extension cable

Parts 3

Attach the car holder

Some treatments on the dashboard or dirt on the suction cup may result in a
significantly less effective bond, so before you start, remove such treatments, and
make sure that the cup is clean.

1 Push the mount locking lever inwards.

© 2013 Nokia. All rights reserved.

4 Attach the car holder

2 Remove the protective film on the suction cup, and place the car holder in a good

spot on the dashboard.

3 Press the car holder down firmly and evenly, and press the mount locking lever

closed.

Tip: If you have trouble getting the suction cup to hold, attach a mounting plate on
the dashboard first.

Remove the holder from the dashboard

Push the mount locking lever inwards, and lift from the tab on the edge of the suction
cup.

© 2013 Nokia. All rights reserved.