Micron Technology TX716A User Manual

Explorer 100 Series – TX716A – POCKET TRANSMITTER - Quick User Guide

at which AF Peak LED flashes

Antenna Socket

Battery Status Indicator

(4) Switch on TX

(by connecting microphone
cable to 6-pin LEMO socket)

Modulation Level

Indicator

Mic Level Control

(5) Check TX battery status LED, if

RED replace battery with a new one

Setting Up Procedure:

(1) Connect provided TX antenna

(Screw-on SMA antenna)

(3) Set your TX frequency same

as RX

please note: to change
frequency turn unit on/off

(6) Check RX ‘Active’ Received Signal

Strength Indicators – a LED should be
GREEN

Audio Input Socket

6-pin LEMO

(7) Adjust LEVEL gain control, while the performer speaks at

correct level so that AF Peak LED comes on all the time, then

set gain back by two notches

occasionally.

(2) Fit a PP3 9V battery, check

RX battery status LED

Please watch polarity of
battery.

The battery compartment is opened
by pressing the button on the back
of the unit. There is a slot for the 9V
battery to fit into.

The battery can easily be
released with the aid of the
thumb.

Battery Life approx. 6

hours

(8) NOW YOUR SYSTEM IS READY TO USE.