Canadian Standards Association Intrinsic Safety Installation Instructions MVD Transmitters
Table of contents
Loading...Micro Motion Canadian Standards Association Intrinsic Safety Installation Instructions MVD Transmitters Installation Instructions
Page 1
Installation Manual
CSA-D-IS Installation Instructions, MVD
Transmitters
Preparation
20001965, Rev ED
January 2022
™
Page 2
Safety messages
Safety messages are provided throughout this manual to protect personnel and equipment. Read each safety message carefully
before proceeding to the next step.
Safety and approval information
This Micro Motion product complies with all applicable European directives when properly installed in accordance with the
instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The following are
available: the EU declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings
and Instructions. In addition the IECEx Installation Instructions for installations outside of the European Union and the CSA
Installation Instructions for installations in North America are available on the internet at www.emerson.com or through your local
Micro Motion support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at
www.emerson.com. For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the configuration
manual. Product data sheets and manuals are available from the Micro Motion web site at www.emerson.com.
Return policy
Follow Micro Motion procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Micro Motion employees. Micro Motion will not accept
your returned equipment if you fail to follow Micro Motion procedures.
Return procedures and forms are available on our web support site at www.emerson.com, or by phoning the Micro Motion
Customer Service department.
Emerson Flow customer service
Email:
• Worldwide: flow.support@emerson.com
• Asia-Pacific: APflow.support@emerson.com
Telephone:
North and South America
United States 800-522-6277 U.K. and Ireland 0870 240 1978 Australia 800 158 727
Canada +1 303-527-5200 The Netherlands +31 (0) 70 413
Mexico +52 55 5809 5010 France +33 (0) 800 917
Argentina +54 11 4809 2700 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy +39 8008 77334 China +86 21 2892 9000
Chile +56 2 2928 4800 Central & Eastern +41 (0) 41 7686
Peru +51 15190130 Russia/CIS +7 495 995 9559 South Korea +82 2 3438 4600
Europe and Middle East Asia Pacific
New Zealand 099 128 804
6666
India 800 440 1468
901
Japan +81 3 5769 6803
111
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
2
Page 3
Installation Manual Contents
20001965 January 2022
Contents
Chapter 1 Before you begin........................................................................................................5
1.1 About this document...................................................................................................................5
1.2 Hazard messages.........................................................................................................................5
1.3 Hazardous area installations........................................................................................................ 6
Chapter 2 800 Enhanced core processor..................................................................................... 7
Chapter 3 1500 and 2500 transmitters....................................................................................... 9
3.1 1500/2500 4-wire installations.................................................................................................... 9
3.2 1500/2500 9-wire installations.................................................................................................. 14
Chapter 4 1700 and 2700 transmitters..................................................................................... 19
4.1 1700 and 2700 transmitter outputs...........................................................................................19
4.2 1700/2700 4-wire installations.................................................................................................. 27
4.3 1700/2700 integral core processor installations........................................................................ 32
4.4 1700/2700 remote core processor installations.........................................................................37
Chapter 5 2750 4-wire with enhanced core processor and sensor............................................. 43
Chapter 6 3500 transmitters.................................................................................................... 45
6.1 3500 4-wire installations............................................................................................................45
6.2 3500 remote core processor installations.................................................................................. 50
Chapter 7 3700 transmitters.................................................................................................... 55
7.1 3700 4-wire installations............................................................................................................55
7.2 3700 core processor installations...............................................................................................60
7.3 3700 remote core processor installations.................................................................................. 62
Chapter 8 4200 transmitters.................................................................................................... 69
Chapter 9 5700 transmitters.................................................................................................... 71
9.1 5700 transmitter outputs.......................................................................................................... 71
9.2 5700 4-wire installations............................................................................................................77
9.3 5700 9-wire installation............................................................................................................. 80
Chapter 10 Booster amplifiers.................................................................................................... 81
10.1 Booster amplifiers with D600 sensors...................................................................................... 81
Chapter 11 Direct host 4-wire.................................................................................................... 85
11.1 Core processor to direct host through a safety barrier..............................................................86
11.2 Enhanced core processor to direct host through a safety barrier.............................................. 87
Chapter 12 LFT 4-wire to LF sensor installation........................................................................... 89
12.1 Remote LFT CIO with LF sensor................................................................................................ 90
12.2 Remote LFT on DIN rail with LF sensor......................................................................................91
12.3 Remote LFT FOUNDATION fieldbus with LF sensor....................................................................... 92
Installation Instructions 3
Page 4
Contents Installation Manual
January 2022 20001965
12.4 Remote LFT mA Output/Frequency Output with LF sensor.......................................................93
12.5 Remote LFT Profibus-PA with LF sensor....................................................................................94
Appendix A List of drawings........................................................................................................95
4 Micro Motion CSA-D-MVD Transmitter
Page 5
Installation Manual Before you begin
20001965 January 2022
1 Before you begin
1.1 About this document
Use this manual to ensure that any applicable Micro Motion flow meter installation
complies with Canadian Standards Association (CSA) safety standards.
The information in this document assumes that users understand basic transmitter and
sensor installation concepts and procedures.
This manual provides only information associated with installation of transmitters through
CSA-D-IS, MVD instructions. For complete information on flow meter installation, see the
documentation provided with your sensor and transmitter.
1.2 Hazard messages
This document uses the following criteria for hazard messages based on ANSI standards
Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can occur if a
situation is not avoided. There is no credible risk of physical injury.
Physical access
NOTICE
Unauthorized personnel can potentially cause significant damage and/or misconfiguration
of end users' equipment. Protect against all intentional or unintentional unauthorized use.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access to protect users' assets. This is true for all
systems used within the facility.
Installation Instructions 5
Page 6
Before you begin Installation Manual
January 2022 20001965
1.3 Hazardous area installations
If your cable will be installed in a hazardous area, ensure that it meets the hazardous area
requirements.
WARNING
Failure to maintain intrinsic safety in a hazardous area could cause an explosion
resulting in injury or death.
To keep sensor wiring intrinsically safe:
• Keep intrinsically safe (IS) sensor wiring separate from power supply wiring and output
wiring.
• Do not install power cable in the same conduit or cable tray as flow meter cable.
• Use this document with the appropriate approvals documentation. These manuals are
shipped with the flow meter or available at www.emerson.com.
• For hazardous area installations in Europe, refer to standard EN 60079-14 if national
standards do not apply.
6 Micro Motion CSA-D-MVD Transmitter
Page 7
Installation Manual 800 Enhanced core processor
20001965 January 2022
2 800 Enhanced core processor
This drawing describes an 800 enhanced core processor installation.
Installation Instructions 7
Page 8
800 Enhanced core processor Installation Manual
January 2022 20001965
8 Micro Motion CSA-D-MVD Transmitter
Page 9
Installation Manual 1500 and 2500 transmitters
20001965 January 2022
3 1500 and 2500 transmitters
3.1 1500/2500 4-wire installations
List of drawings
Installation Drawing
1500/2500 4-wire core processor to CMF, F, H,
R, CNG, or T sensors
1500/2500 4-wire with core processor and
CMF400 sensor with booster amplifier
1500/2500 4-wire with core processor and D600
sensor
1500/2500 4-wire with enhanced core
processor and sensor
EB-20001220, Revision A
EB-20001219, Revision A
EB-20001218, Revision A
EB-20003009, Revision A
Installation Instructions 9
Page 10
1500 and 2500 transmitters Installation Manual
January 2022 20001965
3.1.1 1500/2500 4-wire core processor to CMF, F, H, R, CNG, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster
amplifier.
10 Micro Motion CSA-D-MVD Transmitter
Page 11
Installation Manual 1500 and 2500 transmitters
20001965 January 2022
3.1.2 1500/2500 4-wire with core processor and CMF400 sensor with booster amplifier
Installation Instructions 11
Page 12
1500 and 2500 transmitters Installation Manual
January 2022 20001965
3.1.3 1500/2500 4-wire with core processor and D600 sensor
12 Micro Motion CSA-D-MVD Transmitter
Page 13
Installation Manual 1500 and 2500 transmitters
20001965 January 2022
3.1.4 1500/2500 4-wire with enhanced core processor and sensor
Installation Instructions 13
Page 14
1500 and 2500 transmitters Installation Manual
January 2022 20001965
3.2 1500/2500 9-wire installations
List of drawings
Installation Drawing
1500/2500 with remote core processor and
CMF, D, DL, F, H, or T sensors
1500/2500 with remote core processor and
CMF400 sensor with booster amplifier
1500/2500 with core processor and D600
sensor
1500/2500 with core processor and DT sensor EB-20001225, Revision A
EB-20001221 Revision BA
EB-20001223, Revision A
EB-20001222, Revision A
14 Micro Motion CSA-D-MVD Transmitter
Page 15
Installation Manual 1500 and 2500 transmitters
20001965 January 2022
3.2.1 1500/2500 with remote core processor and CMF, D, DL, F, H, or T sensors
This drawing does not apply to the D600, DT, or CMF400 with booster amplifier sensors.
Installation Instructions 15
Page 16
1500 and 2500 transmitters Installation Manual
January 2022 20001965
3.2.2 1500/2500 with remote core processor and CMF400 sensor with booster amplifier
16 Micro Motion CSA-D-MVD Transmitter
Page 17
Installation Manual 1500 and 2500 transmitters
20001965 January 2022
3.2.3 1500/2500 with core processor and D600 sensor
Installation Instructions 17
Page 18
1500 and 2500 transmitters Installation Manual
January 2022 20001965
3.2.4 1500/2500 with core processor and DT sensor
18 Micro Motion CSA-D-MVD Transmitter
Page 19
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4 1700 and 2700 transmitters
4.1 1700 and 2700 transmitter outputs
List of drawings
Transmitter Drawing
1700/2700 mA Outputs EB-3600479, Revision CA
1700/2700 intrinsically safe outputs EB-3600629, Revision DA
2700 configurable inputs and outputs EB-3600667, Revision B
1700/2700 FOUNDATION™ fieldbus outputs EB-3600476, Revision DA
1700/2700 fieldbus (FISCO) EB-20007552, Revision B
1700/2700 Profibus-PA outputs EB-3600473, Revision DA
2750 configurable inputs and outputs EB-20011794, Revision A
Installation Instructions 19
Page 20
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.1.1 1700/2700 mA Outputs
20 Micro Motion CSA-D-MVD Transmitter
Page 21
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.1.2 1700/2700 intrinsically safe outputs
Installation Instructions 21
Page 22
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.1.3 2700 configurable inputs and outputs
22 Micro Motion CSA-D-MVD Transmitter
Page 23
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.1.4 1700/2700 FOUNDATION™ fieldbus outputs
Installation Instructions 23
Page 24
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.1.5 1700/2700 fieldbus (FISCO)
24 Micro Motion CSA-D-MVD Transmitter
Page 25
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.1.6 1700/2700 Profibus-PA outputs
Installation Instructions 25
Page 26
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.1.7 2750 configurable inputs and outputs
26 Micro Motion CSA-D-MVD Transmitter
Page 27
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.2 1700/2700 4-wire installations
List of drawings
Installation Drawing
1700/2700 4-wire with core processor and
sensor
1700/2700 4-wire with core processor and
CMF400 sensor with booster amplifier
1700/2700 4-wire with core processor and D600
sensor
1700/2700 4-wire with enhanced core
processor and sensor
EB-3600482, Revision B
EB-3005819, Revision C
EB-1005983, Revision B
EB-20003010, Revision A
Installation Instructions 27
Page 28
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.2.1 1700/2700 4-wire with core processor and sensor
This drawing does not apply to D600 sensors or CMF400 sensors with a booster amplifier.
28 Micro Motion CSA-D-MVD Transmitter
Page 29
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.2.2 1700/2700 4-wire with core processor and CMF400 sensor with booster amplifier
Installation Instructions 29
Page 30
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.2.3 1700/2700 4-wire with core processor and D600 sensor
30 Micro Motion CSA-D-MVD Transmitter
Page 31
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.2.4 1700/2700 4-wire with enhanced core processor and sensor
Installation Instructions 31
Page 32
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.3 1700/2700 integral core processor installations
List of drawings
Installation Drawing
1700/2700 with integral core processor and
CMF, F, H, T, D, or DL sensors
1700/2700 with integral core processor and
CMF400 sensor with booster amplifier
1700/2700 with integral core processor and
D600 sensor
1700/2700 with integral core processor and DT
sensor
EB-20001058 Revision C
EB-30006199, Revision A
EB-3600538, Revision B
EB-36000538, Revision A
32 Micro Motion CSA-D-MVD Transmitter
Page 33
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.3.1 1700/2700 with integral core processor and CMF, F, H, T, D, or DL sensors
This drawing does not apply to the D600, DT, or CMF400 with booster amplifier sensors.
Installation Instructions 33
Page 34
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.3.2 1700/2700 with integral core processor and CMF400 sensor with booster amplifier
34 Micro Motion CSA-D-MVD Transmitter
Page 35
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.3.3 1700/2700 with integral core processor and D600 sensor
Installation Instructions 35
Page 36
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.3.4 1700/2700 with integral core processor and DT sensor
36 Micro Motion CSA-D-MVD Transmitter
Page 37
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.4 1700/2700 remote core processor installations
List of drawings
Installation Drawing
1700/2700 with remote core processor and
CMF, F, T, D, or DL sensors
1700/2700 with remote core processor and
CMF400 sensor with booster amplifier
1700/2700 with remote core processor and
D600 sensor
1700/2700 with remote core processor and DT
sensor
EB-20001060 Revision BA
EB-3007061, Revision B
EB-1005119 Revision B
EB-3600674, Revision C
Installation Instructions 37
Page 38
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.4.1 1700/2700 with remote core processor and CMF, F, T, D, or DL sensors
This drawing does not apply to the D600, DT, or CMF400 with booster amplifier sensors.
38 Micro Motion CSA-D-MVD Transmitter
Page 39
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.4.2 1700/2700 with remote core processor and CMF400 sensor with booster amplifier
Installation Instructions 39
Page 40
1700 and 2700 transmitters Installation Manual
January 2022 20001965
4.4.3 1700/2700 with remote core processor and D600 sensor
40 Micro Motion CSA-D-MVD Transmitter
Page 41
Installation Manual 1700 and 2700 transmitters
20001965 January 2022
4.4.4 1700/2700 with remote core processor and DT sensor
Installation Instructions 41
Page 42
1700 and 2700 transmitters Installation Manual
January 2022 20001965
42 Micro Motion CSA-D-MVD Transmitter
Page 43
This unit is pr ovided with an
internal and e xternal ter minal
for supplementary bonding connection.
This ter minal is for use wher e local codes or
authorities per mit or r equire such connection.
Installation Manual 2750 4-wire with enhanced core processor and sensor
20001965 January 2022
5 2750 4-wire with enhanced core
processor and sensor
Installation Instructions 43
Page 44
2750 4-wire with enhanced core processor and sensor Installation Manual
January 2022 20001965
44 Micro Motion CSA-D-MVD Transmitter
Page 45
Installation Manual 3500 transmitters
20001965 January 2022
6 3500 transmitters
6.1 3500 4-wire installations
List of drawings
Installation Drawing
3500 4-wire with core processor and CMF, F, H,
R, CNG, or T sensors
3500 4-wire with core processor and CMF400
sensor with booster amplifier
3500 4-wire with core processor and D600
sensor
3500 4-wire with enhanced core processor and
sensor
EB-20000250, Revision B
EB-20000244, Revision B
EB-20000247, Revision B
EB-20003011, Revision A
Installation Instructions 45
Page 46
3500 transmitters Installation Manual
January 2022 20001965
6.1.1 3500 4-wire with core processor and CMF, F, H, R, CNG, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster
amplifier.
46 Micro Motion CSA-D-MVD Transmitter
Page 47
Installation Manual 3500 transmitters
20001965 January 2022
6.1.2 3500 4-wire with core processor and CMF400 sensor with booster amplifier
Installation Instructions 47
Page 48
3500 transmitters Installation Manual
January 2022 20001965
6.1.3 3500 4-wire with core processor and D600 sensor
48 Micro Motion CSA-D-MVD Transmitter
Page 49
Installation Manual 3500 transmitters
20001965 January 2022
6.1.4 3500 4-wire with enhanced core processor and sensor
Installation Instructions 49
Page 50
3500 transmitters Installation Manual
January 2022 20001965
6.2 3500 remote core processor installations
List of drawings
Installation Drawing
3500 with remote core processor and CMF, D,
DL, H, or T sensors
3500 with remote core processor and CMF400
sensor with booster amplifier
3500 with remote core processor and D600
sensor
3500 with remote core processor and DT sensor EB-20000241, Revision B
EB-20001051, Revision CA
EB-20000229, Revision BA
EB-20000232, Revision B
50 Micro Motion CSA-D-MVD Transmitter
Page 51
Installation Manual 3500 transmitters
20001965 January 2022
6.2.1 3500 with remote core processor and CMF, D, DL, H, or T sensors
This drawing does not apply to the D600, DT, or CMF400 with booster amplifier sensors.
Installation Instructions 51
Page 52
3500 transmitters Installation Manual
January 2022 20001965
6.2.2 3500 with remote core processor and CMF400 sensor with booster amplifier
52 Micro Motion CSA-D-MVD Transmitter
Page 53
Installation Manual 3500 transmitters
20001965 January 2022
6.2.3 3500 with remote core processor and D600 sensor
Installation Instructions 53
Page 54
3500 transmitters Installation Manual
January 2022 20001965
6.2.4 3500 with remote core processor and DT sensor
54 Micro Motion CSA-D-MVD Transmitter
Page 55
Installation Manual 3700 transmitters
20001965 January 2022
7 3700 transmitters
7.1 3700 4-wire installations
List of drawings
Installation Drawing
3700 4-wire with core processor and CMF400
sensor with booster amplifier
3700 4-wire with core processor and CMF, F, H,
R, CNF, or T sensors
3700 4-wire with core processor and D600
sensor
3700 4-wire with enhanced core processor and
sensor
EB-20000218, Revision B
EB-20000224, Revision B
EB-20000221, Revision B
EB-20003012, Revision A
Installation Instructions 55
Page 56
3700 transmitters Installation Manual
January 2022 20001965
7.1.1 3700 4-wire with core processor and CMF400 sensor with booster amplifier
56 Micro Motion CSA-D-MVD Transmitter
Page 57
Installation Manual 3700 transmitters
20001965 January 2022
7.1.2 3700 4-wire with core processor and CMF, F, H, R, CNF, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster
amplifier.
Installation Instructions 57
Page 58
3700 transmitters Installation Manual
January 2022 20001965
7.1.3 3700 4-wire with core processor and D600 sensor
58 Micro Motion CSA-D-MVD Transmitter
Page 59
Installation Manual 3700 transmitters
20001965 January 2022
7.1.4 3700 4-wire with enhanced core processor and sensor
Installation Instructions 59
Page 60
3700 transmitters Installation Manual
January 2022 20001965
7.2 3700 core processor installations
List of drawings
Installation Drawing
3700 with core processor and CMF, F, H, or T
sensors
EB-20001054, Revision B
60 Micro Motion CSA-D-MVD Transmitter
Page 61
Installation Manual 3700 transmitters
20001965 January 2022
7.2.1 3700 with core processor and CMF, F, H, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster
amplifier.
Installation Instructions 61
Page 62
3700 transmitters Installation Manual
January 2022 20001965
7.3 3700 remote core processor installations
List of drawings
Installation Drawing
3700 with remote core processor and CMF, D,
DL, F, H, or T sensors
3700 with remote core processor and CMF300A
sensor
3700 with remote core processor and CMF400
sensor with booster amplifier
3700 with remote core processor and D600
sensor
3700 with remote core processor and DT sensor EB-20000215, Revision B
EB-20001053, Revision CA
EB-20000212, Revision C
EB-20000203, Revision B
EB-20000206, Revision B
62 Micro Motion CSA-D-MVD Transmitter
Page 63
Installation Manual 3700 transmitters
20001965 January 2022
7.3.1 3700 with remote core processor and CMF, D, DL, F, H, or T sensors
This drawing does not apply to the D600, DT, or CMF400 with booster amplifier sensors.
Installation Instructions 63
Page 64
3700 transmitters Installation Manual
January 2022 20001965
7.3.2 3700 with remote core processor and CMF300A sensor
64 Micro Motion CSA-D-MVD Transmitter
Page 65
Installation Manual 3700 transmitters
20001965 January 2022
7.3.3 3700 with remote core processor and CMF400 sensor with booster amplifier
Installation Instructions 65
Page 66
3700 transmitters Installation Manual
January 2022 20001965
7.3.4 3700 with remote core processor and D600 sensor
66 Micro Motion CSA-D-MVD Transmitter
Page 67
Installation Manual 3700 transmitters
20001965 January 2022
7.3.5 3700 with remote core processor and DT sensor
Installation Instructions 67
Page 68
3700 transmitters Installation Manual
January 2022 20001965
68 Micro Motion CSA-D-MVD Transmitter
Page 69
: T6
: T4A
SENSOR
or
in
FOR 4200*****AA***** and 4200*****2A***** only:
This unit is provided with an external terminal for supplementary
bonding connection. This terminal is for use where local codes
or authorities permit or require such connection
For 4200*****AA***** only:
WARNINIG - ASEAL SHALL BE INSTALLED WITHIN 2
INCHES (50MM) OF THE ENCLOSURE
AVERTISSEMENT - UN SCELLEMENT DOIT ETRE
INSTALLEA MOINS DE 2 POUCES (50mm) DU BOITIER
For connection of one, solid or stranded conductors use
26 AWG (0.129 mm²) to 14AWG(2.08 mm²)
For connection of two, solid or stranded conductors use
26 AWG(0.129 mm²) to 17AWG(1.04 mm²)
IMPAIR
Installation Manual 4200 transmitters
20001965 January 2022
8 4200 transmitters
This drawing describes an outputs installation for a 4200 2-wire transmitter.
Installation Instructions 69
Page 70
4200 transmitters Installation Manual
January 2022 20001965
70 Micro Motion CSA-D-MVD Transmitter
Page 71
Installation Manual 5700 transmitters
20001965 January 2022
9 5700 transmitters
9.1 5700 transmitter outputs
Table 9-1: List of drawings
Transmitter Drawing
5700 CIO EB-20028175, Revision AA
5700 Ethernet EB-20030708, Revision AA
5700 fieldbus EB-20030711, Revision AA
5700 fieldbus (FISCO) EB-20030804, Revision AA
5700 IS EB-20045787, Revision AA
Installation Instructions 71
Page 72
5700 transmitters Installation Manual
January 2022 20001965
9.1.1 5700 CIO
This drawing describes an outputs installation for a 5700 transmitter with configurable
inputs and outputs.
72 Micro Motion CSA-D-MVD Transmitter
Page 73
Installation Manual 5700 transmitters
20001965 January 2022
9.1.2 5700 Ethernet
This drawing describes an outputs installation for a 5700 transmitter with Ethernet
outputs.
Installation Instructions 73
Page 74
5700 transmitters Installation Manual
January 2022 20001965
9.1.3 5700 fieldbus
This drawing describes an outputs installation for a 5700 transmitter with fieldbus
outputs.
74 Micro Motion CSA-D-MVD Transmitter
Page 75
Installation Manual 5700 transmitters
20001965 January 2022
9.1.4 5700 fieldbus (FISCO)
This drawing describes an outputs installation for a 5700 transmitter with fieldbus (FISCO)
outputs.
Installation Instructions 75
Page 76
COPYRIGHT 2017 MICRO M OTION, IN C.
ALLRIGHTS RESERVED
EB-20045787 Rev. A A
5700 transmitters Installation Manual
January 2022 20001965
9.1.5 5700 IS
This drawing describes an outputs installation for a 5700 transmitter with intrinsically safe
outputs.
76 Micro Motion CSA-D-MVD Transmitter
Page 77
Installation Manual 5700 transmitters
20001965 January 2022
9.2 5700 4-wire installations
Table 9-2: List of drawings
Installation Drawing
Remote 5700 4-wire with remote core
processor
Remote 5700 4-wire with core processor EB-20028177, Revision AA
EB-20028178, Revision AA
Installation Instructions 77
Page 78
(WARNI NG: S UBSTITUT ION O F C OMPONE NTS MAY I MPAIR INT RINSIC S AFETY)
D
D
700 CORE
800 ENHAN CED CORE
5700 transmitters Installation Manual
January 2022 20001965
9.2.1 Remote 5700 4-wire with remote core processor
This drawing describes a remote 5700 4-wire installation with a remote core processor
mounted on a sensor with a junction box.
78 Micro Motion CSA-D-MVD Transmitter
Page 79
TO
D
D
(WARN ING: SUBST ITUTIO N OF CO MPONEN TS M AY IMPAI R IN TRINS IC S AFETY)
Installation Manual 5700 transmitters
20001965 January 2022
9.2.2 Remote 5700 4-wire with core processor
This drawing describes a remote 5700 4-wire installation with a core processor mounted
on a sensor.
Installation Instructions 79
Page 80
(WARNI NG: S UBSTITU TION OF C OMPONEN TS M AY IM PAIR INTRI NSIC S AFETY)
I
I
I I
5700 transmitters Installation Manual
January 2022 20001965
9.3 5700 9-wire installation
This drawing describes a 5700 transmitter connected to a remote core processor that has
a 9-wire junction box mounted on a sensor.
80 Micro Motion CSA-D-MVD Transmitter
Page 81
Installation Manual Booster amplifiers
20001965 January 2022
10 Booster amplifiers
10.1 Booster amplifiers with D600 sensors
List of drawings
Installation Drawing
Booster amplifier with core processor and D600
sensor
Booster amplifier with junction box and D600
sensor
EB-1005084, Revision B
EB-1005085, Revision B
Installation Instructions 81
Page 82
Booster amplifiers Installation Manual
January 2022 20001965
10.1.1 Booster amplifier with core processor and D600 sensor
82 Micro Motion CSA-D-MVD Transmitter
Page 83
Installation Manual Booster amplifiers
20001965 January 2022
10.1.2 Booster amplifier with junction box and D600 sensor
Installation Instructions 83
Page 84
Booster amplifiers Installation Manual
January 2022 20001965
84 Micro Motion CSA-D-MVD Transmitter
Page 85
Installation Manual Direct host 4-wire
20001965 January 2022
11 Direct host 4-wire
Table 11-1: List of drawings
Installation Drawing
Core processor to direct host through a safety
barrier
Enhanced core processor to direct host through
a safety barrier
EB-3600799, Revision CA
EB-20003013, Revision A
Installation Instructions 85
Page 86
Direct host 4-wire Installation Manual
January 2022 20001965
11.1 Core processor to direct host through a safety barrier
86 Micro Motion CSA-D-MVD Transmitter
Page 87
Installation Manual Direct host 4-wire
20001965 January 2022
11.2 Enhanced core processor to direct host through a safety barrier
Installation Instructions 87
Page 88
Direct host 4-wire Installation Manual
January 2022 20001965
88 Micro Motion CSA-D-MVD Transmitter
Page 89
Installation Manual LFT 4-wire to LF sensor installation
20001965 January 2022
12 LFT 4-wire to LF sensor installation
Table 12-1: List of drawings
Installation Drawing
Remote LFT CIO with LF sensor EB-20002229, Revision A
Remote LFT on DIN rail with LF sensor EB-20002223, Revision A
Remote LFT FOUNDATION fieldbus with LF sensor EB-20002226, Revision A
Remote LFT mA Output/Frequency Output with
LF sensor
Remote LFT Profibus-PA with LF sensor EB-20002225, Revision A
EB-20002227, Revision A
Installation Instructions 89
Page 90
LFT 4-wire to LF sensor installation Installation Manual
January 2022 20001965
12.1 Remote LFT CIO with LF sensor
This drawing describes a remote LFT 4-wire configurable inputs and outputs transmitter
mounted to an LF sensor.
90 Micro Motion CSA-D-MVD Transmitter
Page 91
Installation Manual LFT 4-wire to LF sensor installation
20001965 January 2022
12.2 Remote LFT on DIN rail with LF sensor
Installation Instructions 91
Page 92
LFT 4-wire to LF sensor installation Installation Manual
January 2022 20001965
12.3 Remote LFT FOUNDATION fieldbus with LF sensor
This drawing describes a remote LFT 4-wire FOUNDATION fieldbus transmitter mounted to
an LF sensor.
92 Micro Motion CSA-D-MVD Transmitter
Page 93
Installation Manual LFT 4-wire to LF sensor installation
20001965 January 2022
12.4 Remote LFT mA Output/Frequency Output with LF sensor
Installation Instructions 93
Page 94
LFT 4-wire to LF sensor installation Installation Manual
January 2022 20001965
12.5 Remote LFT Profibus-PA with LF sensor
This drawing describes a remote LFT 4-wire Profibus-PA transmitter mounted to an LF
sensor.
94 Micro Motion CSA-D-MVD Transmitter
Page 95
Installation Manual List of drawings
20001965 January 2022
A List of drawings
Table A-1: List of Drawings
Drawing name Location
EB-10005117, Revision B 1700/2700 with integral core processor and D600 sensor
EB-1005084, Revision B Booster amplifier with core processor and D600 sensor
EB-1005085, Revision B Booster amplifier with junction box and D600 sensor
EB-1005119, Revision B 1700/2700 with remote core processor and D600 sensor
EB-20000206, Revision B 3700 with remote core processor and D600 sensor
EB-20000215, Revision B 3700 with remote core processor and DT sensor
EB-20000224, Revision B 3700 4-wire with core processor and CMF, F, H, R, CNF, or T sensors
EB-20000229, Revision BA 3500 with remote core processor and CMF400 sensor with booster
amplifier
EB-20000232, Revision B 3500 with remote core processor and D600 sensor
EB-20000241, Revision B 3500 with remote core processor and DT sensor
EB-20000244, Revision B 3500 4-wire with core processor and CMF400 sensor with booster
amplifier
EB-20000247, Revision B 3500 4-wire with core processor and D600 sensor
EB-20000250, Revision B 3500 4-wire with core processor and CMF, F, H, R, CNG, or T sensors
EB-20001051, Revision C 3500 with remote core processor and CMF, D, DL, H, or T sensors
EB-20001053, Revision C 3700 with remote core processor and CMF, D, DL, F, H, or T sensors
EB-20001058, Revision, C 1700/2700 with integral core processor and CMF, F, H, T, D, or DL
sensors
EB-20001060, Revision, BA 1700/2700 with remote core processor and CMF, F, T, D, or DL
sensors
EB-20001218, Revision A 1500/2500 4-wire with core processor and D600 sensor
EB-20001219, Revision A 1500/2500 4-wire with core processor and CMF400 sensor with
booster amplifier
EB-20001220, Revision A 1500/2500 4-wire core processor to CMF, F, H, R, CNG, or T sensors
EB-20001221 Revision B 1500/2500 with remote core processor and CMF, D, DL, F, H, or T
sensors
EB-20001222, Revision A 1500/2500 with core processor and D600 sensor
EB-20001223, Revision A 1500/2500 with remote core processor and CMF400 sensor with
booster amplifier
EB-20001225, Revision A 1500/2500 with core processor and DT sensor
EB-2000203, Revision B 3700 with remote core processor and CMF400 sensor with booster
amplifier
Installation Instructions 95
Page 96
List of drawings Installation Manual
January 2022 20001965
Table A-1: List of Drawings (continued)
Drawing name Location
EB-2000218, Revision B 3700 4-wire with core processor and CMF400 sensor with booster
amplifier
EB-2000221, Revision B 3700 4-wire with core processor and D600 sensor
EB-20002223, Revision A Remote LFT on DIN rail with LF sensor
EB-20002225, Revision A Remote LFT Profibus-PA with LF sensor
EB-20002226, Revision A Remote LFT FOUNDATION fieldbus with LF sensor
EB-20002227, Revision A Remote LFT mA Output/Frequency Output with LF sensor
EB-20002229, Revision A Remote LFT CIO with LF sensor
EB-20003009, Revision A 1500/2500 4-wire with enhanced core processor and sensor
EB-20003010, Revision A 1700/2700 4-wire with enhanced core processor and sensor
EB-20003011, Revision A 3500 4-wire with enhanced core processor and sensor
EB-20003012, Revision A 3700 4-wire with enhanced core processor and sensor
EB-20003013, Revision A Enhanced core processor to direct host through a safety barrier
EB-20003427, Revision A 800 Enhanced core processor
EB-20007552, Revision B 1700/2700 fieldbus (FISCO)
EB-20011794, Revision A 2750 configurable inputs and outputs
EB-20011795, Revision A 2750 4-wire with enhanced core processor and sensor
EB-20028175, Revision AA 5700 CIO
EB-20028176, Revision AA 5700 9-wire installation
EB-20028177, Revision AA Remote 5700 4-wire with core processor
EB-20028178, Revision AA Remote 5700 4-wire with remote core processor
EB-20030708, Revision AA 5700 Ethernet
EB-20030711, Revision AA 5700 fieldbus
EB-20030804, Revision AA 5700 fieldbus (FISCO)
EB-20057521_AA 4200 transmitters
EB-3005819, Revision C 1700/2700 4-wire with core processor and CMF400 sensor with
booster amplifier
EB-3006199, Revision C 1700/2700 with integral core processor and CMF400 sensor with
booster amplifier
EB-3007061, Revision B 1700/2700 with remote core processor and CMF400 sensor with
booster amplifier
EB-3600473, Revision DA 1700/2700 Profibus-PA outputs
EB-3600476, Revision DA 1700/2700 FOUNDATION™ fieldbus outputs
EB-3600479, Revision CA 1700/2700 mA Outputs
EB-3600482, Revision BA 1700/2700 4-wire with core processor and sensor
96 Micro Motion CSA-D-MVD Transmitter
Page 97
Installation Manual List of drawings
20001965 January 2022
Table A-1: List of Drawings (continued)
Drawing name Location
EB-3600538, Revision B 1700/2700 with integral core processor and DT sensor
EB-3600629, Revision D 1700/2700 intrinsically safe outputs
EB-3600667, Revision B 2700 configurable inputs and outputs
EB-3600674, Revision C 1700/2700 with remote core processor and DT sensor
EB-3600799, Revision CA Core processor to direct host through a safety barrier
Installation Instructions 97
Page 98
*20001965*
20001965
Rev. ED
2022
For more information:
©
2022 Micro Motion, Inc. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson
Electric Co. Micro Motion, ELITE, ProLink, MVD and MVD Direct
Connect marks are marks of one of the Emerson Automation
Solutions family of companies. All other marks are property of
their respective owners.
www.emerson.com
Loading...