Canadian Standards Association Intrinsic Safety Installation Instructions 9-Wire
Table of contents
Loading...Micro Motion Canadian Standards Association Intrinsic Safety Installation Instructions 9-Wire Installation Instructions
Page 1
Installation Manual
MMI-20001968, Rev BB
CSA-D-IS Installation Instructions, 9-Wire
Preparation
October 2018
Page 2
Safety and approval information
This Micro Motion product complies with all applicable European directives when properly installed in accordance with the
instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration
of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available
on the internet at www.emerson.com or through your local Micro Motion support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at
www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the configuration
manual. Product data sheets and manuals are available from the Micro Motion web site at www.emerson.com.
Return policy
Follow Micro Motion procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Micro Motion employees. Micro Motion will not accept
your returned equipment if you fail to follow Micro Motion procedures.
Return procedures and forms are available on our web support site at www.emerson.com, or by phoning the Micro Motion
Customer Service department.
Emerson Flow customer service
Email:
• Worldwide: flow.support@emerson.com
• Asia-Pacific: APflow.support@emerson.com
Telephone:
North and South America
United States 800-522-6277 U.K. 0870 240 1978 Australia 800 158 727
Canada +1 303-527-5200 The Netherlands +31 (0) 704 136
Mexico +41 (0) 41 7686
111
Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000
Europe and Middle East Asia Pacific
666
France 0800 917 901 India 800 440 1468
Central & Eastern +41 (0) 41 7686
111
Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
New Zealand 099 128 804
Japan +81 3 5769 6803
2
Page 3
Installation Manual Contents
MMI-20001968 October 2018
Contents
Chapter 1 Planning the installation................................................................................................ 7
1.1 About this document........................................................................................................................7
1.2 Hazardous area installations............................................................................................................. 7
Chapter 2 Model 1700/2700 9-wire installations ............................................................................9
2.1 Model 1700/2700 transmitter with integrally-mounted processor to junction box on CMF, F,
H, T, D, and DL sensors.....................................................................................................................10
2.2 Model 1700/2700 transmitter with integrally-mounted core processor to 9-wire junction box
for CMF300A sensor.........................................................................................................................11
2.3 Model 1700/2700 transmitter with integrally-mounted core processor to 9-wire junction box
on CMF400 sensor with booster amplifier........................................................................................12
2.4 Model 1700/2700 transmitter with integrally-mounted core processor to junction box on
D600 sensor.................................................................................................................................... 13
2.5 Model 1700/2700 transmitter with integrally-mounted core processor to 9-wire junction box
on DT sensor....................................................................................................................................14
2.6 Model 1700/2700 transmitter installation to remote core processor to 9-wire junction box on
CMF, F, T, D, and DL sensors.............................................................................................................15
2.7 Model 1700/2700 transmitter to 9-wire remote core processor to CMF300A sensor...................... 16
2.8 Model 1700/2700 transmitter to remote mount core processor to 9-wire junction box on
CMF400 sensor with booster amplifier.............................................................................................17
2.9 Model 1700/2700 transmitter to remote core processor to 9-wire junction box on D600 sensor....18
2.10 Model 1700/2700 transmitter to remote core processor to 9-wire junction box on DT sensor......19
Chapter 3 Transmitter output installation....................................................................................21
3.1 Transmitter output installation: Analog outputs for Model 1700/2700 transmitters.......................22
3.2 Transmitter output installation Model 1700/2700 with Intrinsically Safe installation...................... 23
3.3 Transmitter output installation: Model 2700 with configurable inputs and outputs........................24
3.4 Transmitter output installation Model 1700/2700 with Fieldbus.................................................... 25
3.5 Transmitter output installation: Profibus-PA outputs for Model 1700/2700 Transmitters...............26
Chapter 4 Model 3300 nonincendive parameters......................................................................... 27
Chapter 5 Model 3350 nonincendive parameters......................................................................... 29
Chapter 6 Model 3500 transmitter 9-wire installation instructions...............................................31
6.1 Model 3500 transmitter to 9-wire sensor junction box for CMF, F, H, and T sensors ....................... 32
6.2 Model 3500 transmitter to 9-wire sensor junction box for CMF300A sensor................................... 33
6.3 Model 3500 transmitter to sensor junction box for CMF400 sensor with booster amplifier............. 34
6.4 Model 3500 transmiter to sensor junction box for D and DL sensors............................................... 35
6.5 Model 3500 transmitter to 9-wire sensor junction box for D600 sensor.......................................... 36
6.6 Model 3500 transmitter to 9-wire sensor junction box for DT sensor.............................................. 37
Installation Instructions 3
Page 4
Contents Installation Manual
October 2018 MMI-20001968
Chapter 7 Model 3700 9-wire installation instructions................................................................. 39
7.1 Model 3700 transmitter to sensor junction box for CMF, F, H, and T sensors...................................40
7.2 Model 3700 transmitter to sensor junction box for CMF300A sensor.............................................. 41
7.3 Model 3700 transmitter to 9-wire sensor junction box for CMF400 sensor with booster amplifier.. 42
7.4 Model 3700 transmitter to 9-wire sensor junction box for D and DL sensors................................... 43
7.5 Model 3700 transmitter to 9-wire sensor junction box for D600 sensor.......................................... 44
7.6 Model 3700 transmitter to 9-wire sensor junction box for DT sensors.............................................45
Chapter 8 RFT9739 field mount 9-wire installation instructions....................................................47
8.1 RFT9739 transmitter field mounted to sensor junction box for CMF, F, and H sensors.................... 48
8.2 RFT9739 transmitter field-mounted to 9-wire sensor junction box for CMF300A sensor.................49
8.3 RFT9739 transmitter field-mounted to sensor junction box for CMF400 sensor with booster
amplifier.......................................................................................................................................... 50
8.4 RFT9739 transmitter field-mounted to sensor junction box for D and DL sensors........................... 51
8.5 RFT9739 transmitter field-mounted to sensor junction box for D600 sensor ................................. 52
8.6 RFT9739 transmitter field-mounted to sensor junction box for DT sensors.....................................53
Chapter 9 RFT9739 rack mount 9-wire installation instructions....................................................55
9.1 RFT9739 rack mounted transmitter to sensor junction box for CMF, F, and H sensors.....................56
9.2 RFT9739 rack mounted transmitter to sensor junction box for CMF300A sensor............................ 57
9.3 RFT9739 rack mounted transmitter to sensor junction box for CMF400A sensor with booster
amplifier.......................................................................................................................................... 58
9.4 RFT9739 rack mounted transmitter to sensor junction box for D and DL sensors............................ 59
9.5 RFT9739 rack mounted transmitter to sensor junction box for D600 sensor...................................60
9.6 RFT9739 rack mounted transmitter to sensor junction box for DT sensors......................................61
Chapter 10 IFT9701 transmitter 9-wire installation instructions.....................................................63
10.1 IFT9701 transmitter to sensor junction box for CMF, F, and H sensors.......................................... 64
10.2 IFT9739 transmitter to sensor junction box for CMF300A sensor.................................................. 65
10.3 IFT9701 transmitter to sensor junction box for CMF400 sensor with booster amplifier................. 66
10.4 IFT9701 transmitter to sensor junction box for D and DL sensors..................................................67
Chapter 11 Model 1500/2500 9-wire installation instructions.........................................................69
11.1 Model 1500/2500 transmitter to remote mount core processor to 9-wire junction box on
CMF, D (except D600), DL, F, H, and T sensors................................................................................. 70
11.2 Model 1500/2500 transmitter to remote core processor to 9-wire junction box for CMF300A
sensor..............................................................................................................................................71
11.3 Model 1500/2500 transmitter to remote core processor to 9-wire junction box on CMF400
sensor with booster amplifier.......................................................................................................... 72
11.4 Model 1500/2500 transmitter to core processor to 9-wire junction box on D600 sensor.............. 73
11.5 Model 1500/2500 transmitter to core processor to 9-wire junction box on DT sensor.................. 74
Chapter 12 Model 3700 9-wire installation instructions................................................................. 75
12.1 Model 3700 transmitter to remote mount core processor to 9-wire junction box on CMF, D
(except D600), DL, F, H, and T sensors............................................................................................. 76
4 Micro Motion CSA-D-IS 9-Wire
Page 5
Installation Manual Contents
MMI-20001968 October 2018
12.2 Model 3700 transmitter to remote core processor to 9-wire junction box for CMF300A sensor.... 77
12.3 Model 3700 transmitter to remote core processor to 9-wire junction box on CMF400 sensor
with booster amplifier..................................................................................................................... 78
12.4 Model 3700 transmitter to remote core processor to 9-wire junction box on D600...................... 79
12.5 Model 3700 transmitter to remote mount core processor to 9-wire junction box on DT sensor.... 80
Chapter 13 Model 3500 9-wire installation instructions................................................................. 81
13.1 Model 3500 transmitter to remote core processor to 9-wire junction box on CMF, D (except
D600), DL, H, and T sensors............................................................................................................. 82
13.2 Model 3500 transmitter to 9-wire junction box for CMF3000A sensor.......................................... 83
13.3 Model 3500 transmitter to remote core processor to 9-wire junction box on CMF400 sensor
with boost amplifier.........................................................................................................................84
13.4 Model 3500 transmitter to remote mount core processor to 9-wire junction box on D600
sensor..............................................................................................................................................85
13.5 Model 3500 transmitter to remote mount core processor to 9-wire junction box on DT sensor.... 86
Chapter 14 CMF400 booster amplifier installation instructions...................................................... 87
14.1 Booster amplifier with core processor remotely mounted from sensor and transmitter................88
14.2 Booster amplifier with junction box remotely mounted from sensor and transmitter................... 89
Chapter 15 D600 remote booster amplifier installation.................................................................. 91
15.1 D600 remote booster amplifier installation with core processor remotely mounted from
sensor and transmitter.....................................................................................................................92
15.2 D600 remote booster amplifier with junction box remotely mounted from sensor and
transmitter...................................................................................................................................... 93
Appendix A List of drawings............................................................................................................95
Installation Instructions 5
Page 6
Contents Installation Manual
October 2018 MMI-20001968
6 Micro Motion CSA-D-IS 9-Wire
Page 7
Installation Manual Planning the installation
MMI-20001968 October 2018
1 Planning the installation
1.1 About this document
This manual should be used for any Micro Motion flowmeter installation that require
Canadian Standards Association (CSA) approval.
The information in this document assumes that users understand:
• Basic transmitter and sensor installation concepts and procedures
• All corporate, local government, and national government safety standards and
requirements that guard against injuries and death
This manual provides only information associated with installation of transmitters through
CSA-D-IS instructions. For complete information on flowmeter installation, see the
documentation provided with your sensor and transmitter.
1.2 Hazardous area installations
If your cable will be installed in a hazardous area, ensure that it meets the hazardous area
requirements.
DANGER
Failure to maintain intrinsic safety in a hazardous area could result in an explosion.
To keep sensor wiring intrinsically safe:
• Keep intrinsically safe (IS) sensor wiring separate from power supply wiring and output
wiring.
• Do not install power cable in the same conduit or cable tray as flowmeter cable.
• Use this document with the appropriate approvals documentation. These manuals are
shipped with the flowmeter or available on the Emerson web site: www.emerson.com.
• For hazardous area installations in Europe, refer to standard EN 60079-14 if national
standards do not apply.
Installation Instructions 7
Page 8
Planning the installation Installation Manual
October 2018 MMI-20001968
8 Micro Motion CSA-D-IS 9-Wire
Page 9
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2 Model 1700/2700 9-wire installations
Table 2-1: List of Drawings for Model 1700/2700 9-wire installations
Drawing name Location
EB-20001058, Revision, C Model 1700/2700 transmitter with integrally-mounted processor to
junction box on CMF, F, H, T, D, and DL sensors
EB-3600539, Revision C Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box for CMF300A sensor
EB-3006199, Revision C Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box on CMF400 sensor with booster
amplifier
EB-10005117 Revision B Model 1700/2700 transmitter with integrally-mounted core
processor to junction box on D600 sensor
EB-3600538, Revision B Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box on DT sensor
EB-20001060, Revision, BA Model 1700/2700 transmitter installation to remote core processor
to 9-wire junction box on CMF, F, T, D, and DL sensors
EB-3600675, Revision D Model 1700/2700 transmitter to 9-wire remote core processor to
CMF300A sensor
EB-3007061, Revision B Model 1700/2700 transmitter to remote mount core processor to 9-
wire junction box on CMF400 sensor with booster amplifier
EB-1005119 Revision B Model 1700/2700 transmitter to remote core processor to 9-wire
junction box on D600 sensor
EB-3600674, Revision C Model 1700/2700 transmitter to remote core processor to 9-wire
junction box on DT sensor
Installation Instructions 9
Page 10
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
2.1 Model 1700/2700 transmitter with integrallymounted processor to junction box on CMF, F,
H, T, D, and DL sensors
Note
This installation process does not apply to CMF400 sensors with a booster amplifier or to
D600 sensors.
10 Micro Motion CSA-D-IS 9-Wire
Page 11
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2.2 Model 1700/2700 transmitter with integrallymounted core processor to 9-wire junction box
for CMF300A sensor
Installation Instructions 11
Page 12
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
2.3 Model 1700/2700 transmitter with integrallymounted core processor to 9-wire junction box
on CMF400 sensor with booster amplifier
12 Micro Motion CSA-D-IS 9-Wire
Page 13
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2.4 Model 1700/2700 transmitter with integrallymounted core processor to junction box on
D600 sensor
Installation Instructions 13
Page 14
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
2.5 Model 1700/2700 transmitter with integrallymounted core processor to 9-wire junction box
on DT sensor
14 Micro Motion CSA-D-IS 9-Wire
Page 15
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2.6 Model 1700/2700 transmitter installation to remote core processor to 9-wire junction box on CMF, F, T, D, and DL sensors
Note
This installation process does not apply to CMF400 sensors with a booster amplifier or to
D600 sensors.
Installation Instructions 15
Page 16
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
2.7 Model 1700/2700 transmitter to 9-wire remote core processor to CMF300A sensor
Note
This installation process does not apply to CMF400 sensors with a booster amplifier or to
D600 sensors.
16 Micro Motion CSA-D-IS 9-Wire
Page 17
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2.8 Model 1700/2700 transmitter to remote mount core processor to 9-wire junction box on CMF400 sensor with booster amplifier
Installation Instructions 17
Page 18
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
2.9 Model 1700/2700 transmitter to remote core processor to 9-wire junction box on D600 sensor
18 Micro Motion CSA-D-IS 9-Wire
Page 19
Installation Manual Model 1700/2700 9-wire installations
MMI-20001968 October 2018
2.10 Model 1700/2700 transmitter to remote core processor to 9-wire junction box on DT sensor
Installation Instructions 19
Page 20
Model 1700/2700 9-wire installations Installation Manual
October 2018 MMI-20001968
20 Micro Motion CSA-D-IS 9-Wire
Page 21
Installation Manual Transmitter output installation
MMI-20001968 October 2018
3 Transmitter output installation
Table 3-1: List of Drawings for Transmitter output installations
Drawing name Location
EB-3600479, Revision CA Transmitter output installation: Analog outputs for Model
1700/2700 transmitters
EB-3600629, Revision D Transmitter output installation Model 1700/2700 with Intrinsically
Safe installation
EB-3600667, Revision B Transmitter output installation: Model 2700 with configurable
inputs and outputs
EB-3600476, Revision DA Transmitter output installation Model 1700/2700 with Fieldbus
EB-3600473, Revision DA Transmitter output installation: Profibus-PA outputs for Model
1700/2700 Transmitters
Installation Instructions 21
Page 22
Transmitter output installation Installation Manual
October 2018 MMI-20001968
3.1 Transmitter output installation: Analog outputs for Model 1700/2700 transmitters
22 Micro Motion CSA-D-IS 9-Wire
Page 23
Installation Manual Transmitter output installation
MMI-20001968 October 2018
3.2 Transmitter output installation Model 1700/2700 with Intrinsically Safe installation
Installation Instructions 23
Page 24
Transmitter output installation Installation Manual
October 2018 MMI-20001968
3.3 Transmitter output installation: Model 2700 with configurable inputs and outputs
24 Micro Motion CSA-D-IS 9-Wire
Page 25
Installation Manual Transmitter output installation
MMI-20001968 October 2018
3.4 Transmitter output installation Model 1700/2700 with Fieldbus
Installation Instructions 25
Page 26
Transmitter output installation Installation Manual
October 2018 MMI-20001968
3.5 Transmitter output installation: Profibus-PA outputs for Model 1700/2700 Transmitters
26 Micro Motion CSA-D-IS 9-Wire
Page 27
Installation Manual Model 3300 nonincendive parameters
MMI-20001968 October 2018
4 Model 3300 nonincendive
parameters
Installation Instructions 27
Page 28
Model 3300 nonincendive parameters Installation Manual
October 2018 MMI-20001968
28 Micro Motion CSA-D-IS 9-Wire
Page 29
Installation Manual Model 3350 nonincendive parameters
MMI-20001968 October 2018
5 Model 3350 nonincendive
parameters
Installation Instructions 29
Page 30
Model 3350 nonincendive parameters Installation Manual
October 2018 MMI-20001968
30 Micro Motion CSA-D-IS 9-Wire
Page 31
Installation Manual Model 3500 transmitter 9-wire installation instructions
MMI-20001968 October 2018
6 Model 3500 transmitter 9-wire
installation instructions
Table 6-1: List of Drawings for Transmitter Models 3500 9-wire installations
Drawing name Location
EB-20001052, Revision B Model 3500 transmitter to 9-wire sensor junction box for CMF, F, H,
and T sensors
EB-3002934, Revision F Model 3500 transmitter to 9-wire sensor junction box for CMF300A
sensor
EB-3005816, RevisionC Model 3500 transmitter to sensor junction box for CMF400 sensor
with booster amplifier
EB-330555, RevisionD Model 3500 transmiter to sensor junction box for D and DL sensors
EB-1005081, Revision A Model 3500 transmitter to 9-wire sensor junction box for D600
sensor
EB-3300556, Revision C Model 3500 transmitter to 9-wire sensor junction box for DT sensor
Installation Instructions 31
Page 32
Model 3500 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
6.1 Model 3500 transmitter to 9-wire sensor junction box for CMF, F, H, and T sensors
Note
This installation is not supported for the CMF300A sensor or the CMF400 sensor with
booster amplifier.
32 Micro Motion CSA-D-IS 9-Wire
Page 33
Installation Manual Model 3500 transmitter 9-wire installation instructions
MMI-20001968 October 2018
6.2 Model 3500 transmitter to 9-wire sensor junction box for CMF300A sensor
Installation Instructions 33
Page 34
Model 3500 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
6.3 Model 3500 transmitter to sensor junction box for CMF400 sensor with booster amplifier
34 Micro Motion CSA-D-IS 9-Wire
Page 35
Installation Manual Model 3500 transmitter 9-wire installation instructions
MMI-20001968 October 2018
6.4 Model 3500 transmiter to sensor junction box for D and DL sensors
Note
This installation is not supported for either the D600 sensor or the DT sensor.
Installation Instructions 35
Page 36
Model 3500 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
6.5 Model 3500 transmitter to 9-wire sensor junction box for D600 sensor
36 Micro Motion CSA-D-IS 9-Wire
Page 37
Installation Manual Model 3500 transmitter 9-wire installation instructions
MMI-20001968 October 2018
6.6 Model 3500 transmitter to 9-wire sensor junction box for DT sensor
Installation Instructions 37
Page 38
Model 3500 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
38 Micro Motion CSA-D-IS 9-Wire
Page 39
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
7 Model 3700 9-wire installation
instructions
Table 7-1: List of Drawings for Transmitter Models 3700 9-wire installations
Drawing name Location
EB-20001054, Revision B Model 3700 transmitter to sensor junction box for CMF, F, H, and T
sensors
EB-3002936, Revision F Model 3700 transmitter to sensor junction box for CMF300A sensor
EB-3005817, Revision BA Model 3700 transmitter to 9-wire sensor junction box for CMF400
sensor with booster amplifier
EB-3300573, Revision D Model 3700 transmitter to 9-wire sensor junction box for D and DL
sensors
EB-1005082, Revision A Model 3700 transmitter to 9-wire sensor junction box for D600
sensor
EB-3300575, Revision C Model 3700 transmitter to 9-wire sensor junction box for DT sensors
Installation Instructions 39
Page 40
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
7.1 Model 3700 transmitter to sensor junction box for CMF, F, H, and T sensors
Note
These installation instructions do not apply to either the CMF300A sensor or the CMF400
sensor with booster amplifier.
40 Micro Motion CSA-D-IS 9-Wire
Page 41
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
7.2 Model 3700 transmitter to sensor junction box for CMF300A sensor
Installation Instructions 41
Page 42
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
7.3 Model 3700 transmitter to 9-wire sensor junction box for CMF400 sensor with booster amplifier
42 Micro Motion CSA-D-IS 9-Wire
Page 43
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
7.4 Model 3700 transmitter to 9-wire sensor junction box for D and DL sensors
Note
These instructions do not apply to either the D600 sensor or the DT sensor.
Installation Instructions 43
Page 44
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
7.5 Model 3700 transmitter to 9-wire sensor junction box for D600 sensor
44 Micro Motion CSA-D-IS 9-Wire
Page 45
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
7.6 Model 3700 transmitter to 9-wire sensor junction box for DT sensors
Installation Instructions 45
Page 46
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
46 Micro Motion CSA-D-IS 9-Wire
Page 47
Installation Manual RFT9739 field mount 9-wire installation instructions
MMI-20001968 October 2018
8 RFT9739 field mount 9-wire
installation instructions
Table 8-1: List of Drawings for Transmitter RFT9739 9-wire installation instructions
Drawing name Location
EB-20001056, Revision B RFT9739 transmitter field mounted to sensor junction box for CMF,
F, and H sensors
EB-3002930, Revision F RFT9739 transmitter field-mounted to 9-wire sensor junction box for
CMF300A sensor
EB-3005812, Revision C RFT9739 transmitter field-mounted to sensor junction box for
CMF400 sensor with booster amplifier
EB-3002202, Revision E RFT9739 transmitter field-mounted to sensor junction box for D and
DL sensors
EB-1005078, Revision A RFT9739 transmitter field-mounted to sensor junction box for D600
sensor
EB-3002521, Revision B RFT9739 transmitter field-mounted to sensor junction box for DT
sensors
Installation Instructions 47
Page 48
RFT9739 field mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
8.1 RFT9739 transmitter field mounted to sensor junction box for CMF, F, and H sensors
Note
These installation instructions do not apply to either the CMF300A sensor or the CMF400
sensor with booster amplifier.
48 Micro Motion CSA-D-IS 9-Wire
Page 49
Installation Manual RFT9739 field mount 9-wire installation instructions
MMI-20001968 October 2018
8.2 RFT9739 transmitter field-mounted to 9-wire sensor junction box for CMF300A sensor
Installation Instructions 49
Page 50
RFT9739 field mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
8.3 RFT9739 transmitter field-mounted to sensor junction box for CMF400 sensor with booster amplifier
50 Micro Motion CSA-D-IS 9-Wire
Page 51
Installation Manual RFT9739 field mount 9-wire installation instructions
MMI-20001968 October 2018
8.4 RFT9739 transmitter field-mounted to sensor junction box for D and DL sensors
Note
These instructions do not apply to either D600 or DT sensors.
Installation Instructions 51
Page 52
RFT9739 field mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
8.5 RFT9739 transmitter field-mounted to sensor junction box for D600 sensor
52 Micro Motion CSA-D-IS 9-Wire
Page 53
Installation Manual RFT9739 field mount 9-wire installation instructions
MMI-20001968 October 2018
8.6 RFT9739 transmitter field-mounted to sensor junction box for DT sensors
Installation Instructions 53
Page 54
RFT9739 field mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
54 Micro Motion CSA-D-IS 9-Wire
Page 55
Installation Manual RFT9739 rack mount 9-wire installation instructions
MMI-20001968 October 2018
9 RFT9739 rack mount 9-wire
installation instructions
Table 9-1: List of Drawings for Transmitter RFT9739 9-wire rack mount installation
instructions
Drawing name Location
EB-20001057, Revision B RFT9739 rack mounted transmitter to sensor junction box for CMF,
F, and H sensors
EB-3002932, Revision F RFT9739 rack mounted transmitter to sensor junction box for
CMF300A sensor
EB-3005813, Revision C RFT9739 rack mounted transmitter to sensor junction box for
CMF400A sensor with booster amplifier
EB-3002523, Revision E RFT9739 rack mounted transmitter to sensor junction box for D and
DL sensors
EB-1005079, Revision A RFT9739 rack mounted transmitter to sensor junction box for D600
sensor
EB-3002524, Revision B RFT9739 rack mounted transmitter to sensor junction box for DT
sensors
Installation Instructions 55
Page 56
RFT9739 rack mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
9.1 RFT9739 rack mounted transmitter to sensor junction box for CMF, F, and H sensors
Note
These installation instructions do not apply to either the CMF300A sensor or the CMF400
sensor with booster amplifier.
56 Micro Motion CSA-D-IS 9-Wire
Page 57
Installation Manual RFT9739 rack mount 9-wire installation instructions
MMI-20001968 October 2018
9.2 RFT9739 rack mounted transmitter to sensor junction box for CMF300A sensor
Installation Instructions 57
Page 58
RFT9739 rack mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
9.3 RFT9739 rack mounted transmitter to sensor junction box for CMF400A sensor with booster amplifier
58 Micro Motion CSA-D-IS 9-Wire
Page 59
Installation Manual RFT9739 rack mount 9-wire installation instructions
MMI-20001968 October 2018
9.4 RFT9739 rack mounted transmitter to sensor junction box for D and DL sensors
Note
These instructions do not apply to either D600 or DT sensors.
Installation Instructions 59
Page 60
RFT9739 rack mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
9.5 RFT9739 rack mounted transmitter to sensor junction box for D600 sensor
60 Micro Motion CSA-D-IS 9-Wire
Page 61
Installation Manual RFT9739 rack mount 9-wire installation instructions
MMI-20001968 October 2018
9.6 RFT9739 rack mounted transmitter to sensor junction box for DT sensors
Installation Instructions 61
Page 62
RFT9739 rack mount 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
62 Micro Motion CSA-D-IS 9-Wire
Page 63
Installation Manual IFT9701 transmitter 9-wire installation instructions
MMI-20001968 October 2018
10 IFT9701 transmitter 9-wire
installation instructions
Table 10-1: List of Drawings for Transmitter IFT9701 9-wire installation instructions
Drawing name Location
EB-20001055, Revision B IFT9701 transmitter to sensor junction box for CMF, F, and H sensors
EB-3003298, Revision B IFT9739 transmitter to sensor junction box for CMF300A sensor
EB-3005815, Revision C IFT9701 transmitter to sensor junction box for CMF400 sensor with
booster amplifier
EB-3100716, Revision F IFT9701 transmitter to sensor junction box for D and DL sensors
Installation Instructions 63
Page 64
IFT9701 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
10.1 IFT9701 transmitter to sensor junction box for CMF, F, and H sensors
Note
These installation instructions do not apply to either the CMF300A sensor or the CMF400
sensor with booster amplifier.
64 Micro Motion CSA-D-IS 9-Wire
Page 65
Installation Manual IFT9701 transmitter 9-wire installation instructions
MMI-20001968 October 2018
10.2 IFT9739 transmitter to sensor junction box for CMF300A sensor
Installation Instructions 65
Page 66
IFT9701 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
10.3 IFT9701 transmitter to sensor junction box for CMF400 sensor with booster amplifier
66 Micro Motion CSA-D-IS 9-Wire
Page 67
Installation Manual IFT9701 transmitter 9-wire installation instructions
MMI-20001968 October 2018
10.4 IFT9701 transmitter to sensor junction box for D and DL sensors
Note
These instructions do not apply to either D600 or DT sensors.
Installation Instructions 67
Page 68
IFT9701 transmitter 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
68 Micro Motion CSA-D-IS 9-Wire
Page 69
Installation Manual Model 1500/2500 9-wire installation instructions
MMI-20001968 October 2018
11 Model 1500/2500 9-wire installation
instructions
Table 11-1: List of Drawings for Transmitter Models 1500/2500 9-wire installations
Drawing name Location
EB-20001221 Revision BA Model 1500/2500 transmitter to remote mount core processor to 9-
wire junction box on CMF, D (except D600), DL, F, H, and T sensors
EB-20001224 Revision A Model 1500/2500 transmitter to remote core processor to 9-wire
junction box for CMF300A sensor
EB-20001223, Revision A Model 1500/2500 transmitter to remote core processor to 9-wire
junction box on CMF400 sensor with booster amplifier
EB-20001222, Revision A Model 1500/2500 transmitter to core processor to 9-wire junction
box on D600 sensor
EB-20001225, Revision A Model 1500/2500 transmitter to core processor to 9-wire junction
box on DT sensor
Installation Instructions 69
Page 70
Model 1500/2500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
11.1 Model 1500/2500 transmitter to remote mount core processor to 9-wire junction box on CMF, D (except D600), DL, F, H, and T sensors
70 Micro Motion CSA-D-IS 9-Wire
Page 71
Installation Manual Model 1500/2500 9-wire installation instructions
MMI-20001968 October 2018
11.2 Model 1500/2500 transmitter to remote core processor to 9-wire junction box for CMF300A sensor
Installation Instructions 71
Page 72
Model 1500/2500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
11.3 Model 1500/2500 transmitter to remote core processor to 9-wire junction box on CMF400 sensor with booster amplifier
72 Micro Motion CSA-D-IS 9-Wire
Page 73
Installation Manual Model 1500/2500 9-wire installation instructions
MMI-20001968 October 2018
11.4 Model 1500/2500 transmitter to core processor to 9-wire junction box on D600 sensor
Installation Instructions 73
Page 74
Model 1500/2500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
11.5 Model 1500/2500 transmitter to core processor to 9-wire junction box on DT sensor
74 Micro Motion CSA-D-IS 9-Wire
Page 75
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
12 Model 3700 9-wire installation
instructions
Table 12-1: List of Drawings for Transmitter Models 3700 9-wire installations
Drawing name Location
EB-20001053, Revision CA Model 3700 transmitter to remote mount core processor to 9-wire
junction box on CMF, D (except D600), DL, F, H, and T sensors
EB-20000212, Revision C Model 3700 transmitter to remote core processor to 9-wire junction
box for CMF300A sensor
EB-20000203, Revision B Model 3700 transmitter to remote core processor to 9-wire junction
box on CMF400 sensor with booster amplifier
EB-20000206, Revision B Model 3700 transmitter to remote core processor to 9-wire junction
box on D600
EB-20000215, Revision B Model 3700 transmitter to remote mount core processor to 9-wire
junction box on DT sensor
Installation Instructions 75
Page 76
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
12.1 Model 3700 transmitter to remote mount core processor to 9-wire junction box on CMF, D (except D600), DL, F, H, and T sensors
76 Micro Motion CSA-D-IS 9-Wire
Page 77
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
12.2 Model 3700 transmitter to remote core processor to 9-wire junction box for CMF300A sensor
Installation Instructions 77
Page 78
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
12.3 Model 3700 transmitter to remote core processor to 9-wire junction box on CMF400 sensor with booster amplifier
78 Micro Motion CSA-D-IS 9-Wire
Page 79
Installation Manual Model 3700 9-wire installation instructions
MMI-20001968 October 2018
12.4 Model 3700 transmitter to remote core processor to 9-wire junction box on D600
Installation Instructions 79
Page 80
Model 3700 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
12.5 Model 3700 transmitter to remote mount core processor to 9-wire junction box on DT sensor
80 Micro Motion CSA-D-IS 9-Wire
Page 81
Installation Manual Model 3500 9-wire installation instructions
MMI-20001968 October 2018
13 Model 3500 9-wire installation
instructions
Table 13-1: List of Drawings for Transmitter Models 3500 9-wire installations
Drawing name Location
EB-20001051, Revision CA Model 3500 transmitter to remote core processor to 9-wire junction
box on CMF, D (except D600), DL, H, and T sensors
EB-20000238, Revision C Model 3500 transmitter to 9-wire junction box for CMF3000A sensor
EB-20000229, Revision BA Model 3500 transmitter to remote core processor to 9-wire junction
box on CMF400 sensor with boost amplifier
EB-20000232, Revision B Model 3500 transmitter to remote mount core processor to 9-wire
junction box on D600 sensor
EB-20000241, Revision B Model 3500 transmitter to remote mount core processor to 9-wire
junction box on DT sensor
Installation Instructions 81
Page 82
Model 3500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
13.1 Model 3500 transmitter to remote core processor to 9-wire junction box on CMF, D (except D600), DL, H, and T sensors
82 Micro Motion CSA-D-IS 9-Wire
Page 83
Installation Manual Model 3500 9-wire installation instructions
MMI-20001968 October 2018
13.2 Model 3500 transmitter to 9-wire junction box for CMF3000A sensor
Installation Instructions 83
Page 84
Model 3500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
13.3 Model 3500 transmitter to remote core processor to 9-wire junction box on CMF400 sensor with boost amplifier
84 Micro Motion CSA-D-IS 9-Wire
Page 85
Installation Manual Model 3500 9-wire installation instructions
MMI-20001968 October 2018
13.4 Model 3500 transmitter to remote mount core processor to 9-wire junction box on D600 sensor
Installation Instructions 85
Page 86
Model 3500 9-wire installation instructions Installation Manual
October 2018 MMI-20001968
13.5 Model 3500 transmitter to remote mount core processor to 9-wire junction box on DT sensor
86 Micro Motion CSA-D-IS 9-Wire
Page 87
Installation Manual CMF400 booster amplifier installation instructions
MMI-20001968 October 2018
14 CMF400 booster amplifier installation
instructions
Table 14-1: List of Drawings for CMF400 booster amplifier installation instructions
Drawing name Location
EB-3005974, Revision B Booster amplifier with core processor remotely mounted from
sensor and transmitter
EB-3005821, Revision B Booster amplifier with junction box remotely mounted from sensor
and transmitter
Installation Instructions 87
Page 88
CMF400 booster amplifier installation instructions Installation Manual
October 2018 MMI-20001968
14.1 Booster amplifier with core processor remotely mounted from sensor and transmitter
88 Micro Motion CSA-D-IS 9-Wire
Page 89
Installation Manual CMF400 booster amplifier installation instructions
MMI-20001968 October 2018
14.2 Booster amplifier with junction box remotely mounted from sensor and transmitter
Installation Instructions 89
Page 90
CMF400 booster amplifier installation instructions Installation Manual
October 2018 MMI-20001968
90 Micro Motion CSA-D-IS 9-Wire
Page 91
Installation Manual D600 remote booster amplifier installation
MMI-20001968 October 2018
15 D600 remote booster amplifier
installation
Table 15-1: List of Drawings for D600 remote booster amplifier installation
Drawing name Location
EB-1005084, Revision B D600 remote booster amplifier installation with core processor
remotely mounted from sensor and transmitter
EB-1005085, Revision B D600 remote booster amplifier with junction box remotely mounted
from sensor and transmitter
Installation Instructions 91
Page 92
D600 remote booster amplifier installation Installation Manual
October 2018 MMI-20001968
15.1 D600 remote booster amplifier installation with core processor remotely mounted from sensor and transmitter
92 Micro Motion CSA-D-IS 9-Wire
Page 93
Installation Manual D600 remote booster amplifier installation
MMI-20001968 October 2018
15.2 D600 remote booster amplifier with junction box remotely mounted from sensor and transmitter
Installation Instructions 93
Page 94
D600 remote booster amplifier installation Installation Manual
October 2018 MMI-20001968
94 Micro Motion CSA-D-IS 9-Wire
Page 95
Installation Manual List of drawings
MMI-20001968 October 2018
A List of drawings
Table A-1: List of Drawings
Drawing name Location
EB-1005078 Revision A RFT9739 transmitter field-mounted to sensor junction box for D600
sensor
EB-1005079 Revision A RFT9739 rack mounted transmitter to sensor junction box for D600
sensor
EB-1005081 Revision A Model 3500 transmitter to 9-wire sensor junction box for D600
sensor
EB-1005082 Revision A Model 3700 transmitter to 9-wire sensor junction box for D600
sensor
EB-1005084 Revision B D600 remote booster amplifier installation with core processor
remotely mounted from sensor and transmitter
EB-1005085 Revision B D600 remote booster amplifier with junction box remotely mounted
from sensor and transmitter
EB-10005117 Revision B Model 1700/2700 transmitter with integrally-mounted core
processor to junction box on D600 sensor
EB-1005119 Revision B Model 1700/2700 transmitter to remote core processor to 9-wire
junction box on D600 sensor
EB-2000203 Revision B Model 3700 transmitter to remote core processor to 9-wire junction
box on CMF400 sensor with booster amplifier
EB-20000206 Revision B Model 3700 transmitter to remote core processor to 9-wire junction
box on D600
EB-20000212 Revision C Model 3700 transmitter to remote core processor to 9-wire junction
box for CMF300A sensor
EB-20000215 Revision B Model 3700 transmitter to remote mount core processor to 9-wire
junction box on DT sensor
EB-2000229 Revision B Model 3500 transmitter to remote core processor to 9-wire junction
box on CMF400 sensor with boost amplifier
EB-20000232, Revision B Model 3500 transmitter to remote mount core processor to 9-wire
junction box on D600 sensor
EB-20000238, Revision C Model 3500 transmitter to 9-wire junction box for CMF3000A sensor
EB-20000241, Revision B Model 3500 transmitter to remote mount core processor to 9-wire
junction box on DT sensor
EB-20001051, Revision CA Model 3500 transmitter to remote core processor to 9-wire junction
box on CMF, D (except D600), DL, H, and T sensors
EB-20001052, Revision B Model 3500 transmitter to 9-wire sensor junction box for CMF, F, H,
and T sensors
EB-20001053, Revision C Model 3700 transmitter to remote mount core processor to 9-wire
junction box on CMF, D (except D600), DL, F, H, and T sensors
Installation Instructions 95
Page 96
List of drawings Installation Manual
October 2018 MMI-20001968
Table A-1: List of Drawings (continued)
Drawing name Location
EB-20001054, Revision B Model 3700 transmitter to sensor junction box for CMF, F, H, and T
sensors
EB-20001055, Revision B IFT9701 transmitter to sensor junction box for CMF, F, and H sensors
EB-20001056, Revision B RFT9739 transmitter field mounted to sensor junction box for CMF,
F, and H sensors
EB-20001057, Revision B RFT9739 rack mounted transmitter to sensor junction box for CMF,
F, and H sensors
EB-20001058, Revision, C Model 1700/2700 transmitter with integrally-mounted processor to
junction box on CMF, F, H, T, D, and DL sensors
EB-20001060, Revision, BA Model 1700/2700 transmitter installation to remote core processor
to 9-wire junction box on CMF, F, T, D, and DL sensors
EB-20001221 Revision BA Model 1500/2500 transmitter to remote mount core processor to 9-
wire junction box on CMF, D (except D600), DL, F, H, and T sensors
EB-20001222, Revision A Model 1500/2500 transmitter to core processor to 9-wire junction
box on D600 sensor
EB-20001223, Revision A Model 1500/2500 transmitter to remote core processor to 9-wire
junction box on CMF400 sensor with booster amplifier
EB-20001224 Revision A Model 1500/2500 transmitter to remote core processor to 9-wire
junction box for CMF300A sensor
EB-20001225, Revision A Model 1500/2500 transmitter to core processor to 9-wire junction
box on DT sensor
EB-3002202, Revision E RFT9739 transmitter field-mounted to sensor junction box for D and
DL sensors
EB-3002521, Revision B RFT9739 transmitter field-mounted to sensor junction box for DT
sensors
EB-3002523, Revision E RFT9739 rack mounted transmitter to sensor junction box for D and
DL sensors
EB-3002524, Revision B RFT9739 rack mounted transmitter to sensor junction box for DT
sensors
EB-3002930, Revision F RFT9739 transmitter field-mounted to 9-wire sensor junction box for
CMF300A sensor
EB-3002932, Revision F RFT9739 rack mounted transmitter to sensor junction box for
CMF300A sensor
EB-3002934, Revision F Model 3500 transmitter to 9-wire sensor junction box for CMF300A
sensor
EB-3002936, Revision F Model 3700 transmitter to sensor junction box for CMF300A sensor
EB-3003298, Revision B IFT9739 transmitter to sensor junction box for CMF300A sensor
EB-3005812, Revision C RFT9739 transmitter field-mounted to sensor junction box for
CMF400 sensor with booster amplifier
96 Micro Motion CSA-D-IS 9-Wire
Page 97
Installation Manual List of drawings
MMI-20001968 October 2018
Table A-1: List of Drawings (continued)
Drawing name Location
EB-3005813, Revision C RFT9739 rack mounted transmitter to sensor junction box for
CMF400A sensor with booster amplifier
EB-3005815, Revision C IFT9701 transmitter to sensor junction box for CMF400 sensor with
booster amplifier
EB-3005816, RevisionC Model 3500 transmitter to sensor junction box for CMF400 sensor
with booster amplifier
EB-3005817, Revision BA Model 3700 transmitter to 9-wire sensor junction box for CMF400
sensor with booster amplifier
EB-3005821, Revision B Booster amplifier with junction box remotely mounted from sensor
and transmitter
EB-3005974, Revision B Booster amplifier with core processor remotely mounted from
sensor and transmitter
EB-3006199, Revision C Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box on CMF400 sensor with booster
amplifier
EB-3100716, Revision F IFT9701 transmitter to sensor junction box for D and DL sensors
EB-3300193, Revision E Model 3300 nonincendive parameters
EB-330555, Revision D Model 3500 transmiter to sensor junction box for D and DL sensors
EB-3300556, Revision C Model 3500 transmitter to 9-wire sensor junction box for DT sensor
EB-3300573, Revision D Model 3700 transmitter to 9-wire sensor junction box for D and DL
sensors
EB-3300575, Revision C Model 3700 transmitter to 9-wire sensor junction box for DT sensors
EB-3300818, Revision B Model 3350 nonincendive parameters
EB-3600473, Revision DA Transmitter output installation: Profibus-PA outputs for Model
1700/2700 Transmitters
EB-3600476, Revision DA Transmitter output installation Model 1700/2700 with Fieldbus
EB-3600479, Revision CA Transmitter output installation: Analog outputs for Model
1700/2700 transmitters
EB-3600538, Revision B Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box on DT sensor
EB-3600539, Revision C Model 1700/2700 transmitter with integrally-mounted core
processor to 9-wire junction box for CMF300A sensor
EB-3600629, Revision D Transmitter output installation Model 1700/2700 with Intrinsically
Safe installation
EB-3600667, Revision B Transmitter output installation: Model 2700 with configurable
inputs and outputs
EB-3600674, Revision C Model 1700/2700 transmitter to remote core processor to 9-wire
junction box on DT sensor
Installation Instructions 97
Page 98
List of drawings Installation Manual
October 2018 MMI-20001968
Table A-1: List of Drawings (continued)
Drawing name Location
EB-3600675, Revision D Model 1700/2700 transmitter to 9-wire remote core processor to
CMF300A sensor
EB-3600675, Revision D Model 1700/2700 transmitter to 9-wire remote core processor to
CMF300A sensor
98 Micro Motion CSA-D-IS 9-Wire
Page 99
Installation Manual
MMI-20001968 October 2018
Installation Instructions 99
Page 100
*MMI-20001968*
MMI-20001968
Rev. BB
2018
Micro Motion Inc. USA
Worldwide Headquarters
7070 Winchester Circle
Boulder, Colorado USA 80301
T +1 303-527-5200
T +1 800-522-6277
F +1 303-530-8459
www.emerson.com
Micro Motion Asia
Emerson Automation Solutions
1 Pandan Crescent
Singapore 128461
Republic of Singapore
T +65 6363-7766
F +65 6770-8003
©
2018 Micro Motion, Inc. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE,
ProLink, MVD and MVD Direct Connect marks are marks of one of the Emerson Automation
Solutions family of companies. All other marks are property of their respective owners.
Micro Motion Europe
Emerson Automation Solutions
Neonstraat 1
6718 WX Ede
The Netherlands
T +31 (0) 70 413 6666
F +31 (0) 318 495 556
www.micromotion.nl
Micro Motion United Kingdom
Emerson Automation Solutions
Emerson Process Management Limited
Horsfield Way
Bredbury Industrial Estate
Stockport SK6 2SU U.K.
T +44 0870 240 1978
F +44 0800 966 181
Loading...