Micromax X243 Instruction Manual
Getting Started
Understand Your Phone
SIM Card Insertion
To insert your SIM card(s):
1. Switch off the mobile phone and remove the rear cover
and battery, as illustrated in the following image:
2. Insert the SIM card(s) correctly in the card slot(s), as
shown in the following image:
1
3. Finally, insert the battery and place the rear cover of the
Please keep the SIM card out of the reach of
children.
The card and the contacts are vulnerable to
damage due to scratching or bending. Therefore,
be careful when us ing, inserting, or removing the
card.
mobile phone.
Insert Memory Card
To insert memory card, switch off the phone and remove the
rear cover and the battery. Insert the memory card in the card
slot, as shown in the following image:
After inserting the memory card, place back the battery and the
rear cover of the mobile phone.
2
Use only compatible memory cards approved by
Micromax with this device. Incompatible memory
cards may damage the card or the device and corrupt
the data stored in the card.
Turning Your Phone On/ Off
Long press the End/Power key to switch on and off your phone.
Charging the Battery
Before u sing the device for the first time, you must charge the
battery. You can charge the device with a travel adapter or
connecting the device to a PC with a USB cable.
3
You can also use a compatible USB charger to charge
your battery.
Use only Micromax approved chargers and cables.
Unapproved chargers or cables can cause battery to
explode or damage your device.
Using Your Phone
Lock/Unlock the phone
From the home screen press the Left key and then immediately
press * to lock/unlock the phone, as shown in the following
image:
Make a Call
Dial a number and press the SIM 1 or SIM 2 call keys to
make a call (refer the phone layout image on the first
page).
You can also call a number from the phonebook or call log
in the same way.
To change the in-call volume, press the up and down
navigation keys.
4
Loading...