Infrared Products Family
Product Information
In focusing on connectivity solutions for our customers,
Microchip now offers products to suppor t infrared
wireless communication. With the explosive growth of
mobile phones, Personal Digital Assistants (PDAs) and
other handheld electronic devices, the need for a simple,
low-cost wireless communication method has grown as
well.
The MCP2120 Infrared Encoder/Decoder is the first lowcost, easy-to-use infrared peripheral from a company that
also has a broad range of microcontrollers and other
related products specifically targeted for embedded
systems. Utilizing this device and an off-the-shelf infrared
transceiver, Microchip customers will now be able to add
wireless communication capability to their designs. The
MCP2120 enables customers to add infrared wireless
communication capability to their embedded systems by a
simple connection to a micro-controller UART peripheral
on one end and an infrared transceiver at the other end.
If interoperability with other infrared enabled devices is
required in your design, Microchip again has your
solution. The revolutionary MCP2150 Infrared
Communications Controller supporting the IrDA®Standard
is simply the smallest, simplest, most economical way of
adding IrDA cordless connectivity to embedded
applications. In the past, supporting the complex IrDA
Standard protocol stack on the host microcontroller
required a large amount of system resources and protocol
stack knowledge. The MCP2150 off-loads these
requirements to a peripheral device, freeing up the
system designer to focus on the design, not the
communication with the outside world.
Applications for these infrared communication products
include application-specific PCs and specialty peripherals,
and wireless handheld data acquisition systems in the
industrial market, pagers and modems in the
communications market, POS terminals, printers and
digital cameras in the consumer market, and fleet
management systems in the automotive market. Any
application where a cost-effective method of transferring
data without a cable is the desired, Microchip has the
solution.
MCP2120 Features:
• Supports IrDA Physical Layer Specification
– (baud rates up to 115.2k)
• Can support higher speeds than 115.2k bps with higher
frequency crystal oscillator
• Connects to standard microcontroller UART peripherals
• Hardware and proprietar y software baud rate selection
• Interfaces to industry standard infrared transceivers
MCP2150 Features:
• Implements IrDA standard protocol stack on small,
low-cost device
– Includes support for Ir Link Access Protocol (IrLAP),
lr Link Management Protocol (IrLMP), Tiny Transport
Protocol (Tiny TP) and IrComm portions of the IrDA
Standard protocol stack
• 18-pin PDIP, 18-pin SOIC and 20-pin SSOP packages
• Supports baud rates of 9600, 19.2k, 57.5k, and
115.2k bps
• Includes encoder/decoder capability from UART
bitstreams to IrDA Standard specified pulses
• Connects to standard microcontoller UART peripherals
and optical transceivers
Related Datasheets and Other Literature:
• DS21618 MCP2120 Datasheet
• DS21655 MCP2150 Datasheet
• AN756 Using the MCP2120 for Infrated
Communication
• AN758 Using the MCP2150 to add IrDA Standard
cordless connectivity
• TB91046 Connecting the MCP2150 to a Psion OS
• TB91047 Connecting the MCP2150 to a Windows
®
CE OS
• TB91048 Connecting the MCP2150 to a Windows
®
OS
• TB91049 Connecting the MCP2150 to a Palm
®
OS
Microchip Technology Inc. · The Embedded Control Solutions Company
®