Mi Temperature and Humidity Monitor 2
User Manual
Read this m anual caref ully before u se, and retai n it for
future reference.
Product Overview
Front
Top Ventilation Holes
Note:
Do not obstruct the ventilation
holes when installing or using
the monitor.
Lanyard Hole
Note:
To use the lanyard hole,
remove the back cover of the
monitor first.
Display
Rear
Rear Ventilation Holes
Note:
Do not obstruct the
ventilation holes when
installing or using the
monitor.
Adhesive Area
Cover Opening
01
Accessory
Adhesive Sticker
Installation
Installing the Battery
Remove the cover from the
cover opening of the monitor,
and place a CR2032 battery
with the positive (+) side
facing upwards, then reinstall
the cover.
Note: Battery is not included
and sold separately.
You can use and install your monitor in the following
ways:
Placing: Directly place the monitor on the surface
a.
of the furniture such as table, bookshelf.
Using the adhesive
b.
sticker: Remove the
release liner from one
side of the adhesive
sticker to stick it on the
back of the monitor,
then remove the release
liner from the other side
to stick it at the desired
place on the wall.
02
c.
Hanging: Remove the back cover of the monitor,
and lead the lanyard's loop through the hole and
around the hook. Reinstall the back cover, then
hang the monitor.
Note: Lanyard is not included and sold separately.
Display Description
Temperature
Data Transfer Symbol
Temperature Unit
Humidity
Low Battery Symbol
Comfort Level Symbol
03