Mi Smart LED Bulb Essential (White and Color)
User Manual
Specifications
Model: MJDPL01YL
Lamp Fitting: E27
Rated Power: 9 W
Luminous Flux: 950 lumens
Rated Input: 220-240 V ~ 50/60 Hz 0.07 A
Color Temperature Range: 1700 –650 0 K
Wireless Connectivity:
Wi- Fi IEE E 802.11 b/g/n 2.4 GHz
Service Li fe: Approx.25,0 00 h
Operating Temperature: -10℃ to 40℃
Operating Humidi ty: 0 –85% RH
Operating Frequency: 2412
Maxim um Out put Power: 17.41 dBm
Dimen sions: φ55 × 120 mm
–2472 MHz
Installation Steps
Install the Light Bulb
Insta ll the light bu lb and turn on t he power.
Notes:
1. Make sure that the po wer is off when in stalling,
removi ng, or examini ng the light bul b.
2. Do not u se this produc t in a lamp with a dim mer
(e.g. a desk l amp with a round d immer switch) to
avoid dam aging the prod uct.
3. Do not us e this produ ct in a damp e nvironme nt.
4. Do not use the lig ht bulb in a narro w and
ill- ventilated la mp shade as it ma y cause weak
signals or heat dissipationissues.
Connect with Mi Home / Xiaomi
02
Home App
This product works with Mi Home / Xiaomi Home
app *. Control your device, and interact it and
other smart home devices with Mi Home / Xiaomi
Home app.
Scan the QR code to download and install the app.
You will be directed to the connection setup page
if the app is installed already. Or search "Mi
Home / Xiaomi Home" in the app Store to
download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the
upper right, and then follow prompts to add your
device.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on your
device should be taken as the default.
Note: The version of the app might
have been updated, please
follow the instructions based on
the current app version.
Link a Mi Device with Google
03
Assistant
Add the Mi Home / Xiaomi Home service to the
Google Assistant app, to control devices
connected to Mi Home / Xiaomi Home from
Google Assistant.
1. Tap in the Google Assistant app, search for
“Mi Home / Xiaomi Home”, tap “Link”, and sign in
with your Xiaomi account.
2. Tap in Settings > Home control to add a
device, and follow the on-screen instructions.
Once the accounts are linked, you can control the
Mi device from Google Assistant.
Link a Mi Device with Amazon
04
Alexa
Add the Mi Home / Xiaomi Home skill to the
Amazon Alexa app, to control devices connected
to Mi Home / Xiaomi Home from Amazon Alexa.
1. Tap in the Amazon Alexa app, then tap “Skills
& Games”, search for “Mi Home / Xiaomi Home”,
select the correct skill and tap “Enable”. Then sign
in with your Xiaomi account.
2. After successfully linking the accounts, tap
DISCOVER DEVICES to add the device, and follow
the on-screen instructions. Once the accounts are
linked, you can control the Mi device from Amazon
Alexa.
Note: The name (Mi Home or Xiaomi Home) varies by
selected language or regions.
How to Restore to Factory Settings
Use the light switch to tu rn the li ght bulb on
and off f ive times (on for two seconds, of f for
two seconds). The l ight bulb will display a
circling mul ti-colored effect, then au tomatically reset itself and dis play a white light afte r five
seconds. This shows that the light bu lb has
been restore d to its factor y settings.
Product Features
Wi-Fi Connection
(Hub Fr ee)
Adjustable Brightness
(80–950 lm)
Scheduled On/OffSmar t App Control
Voice Control
Adjustable Color
Temperature (1700–6500 K)
Warning
1. Before usi ng this produc t, please make s ure that your
voltag e is appropria te for this produ ct’s working
voltag e. Using this pro duct with a vol tage other than
the one sp ecified may da mage the produ ct and cause
safety hazards.
2. Do not di sassemble th is product, a s the light diod es
can caus e damage to the eye s.
3. The lig ht bulb will hea t up when worki ng.
Do not use i t in a confined h older for an ex tended
perio d of time. Ensure s ufficient ve ntilation fo r the light
bulb to all ow for heat dissi pation.
4. The o ptical radiat ion of this LED lig ht product c omplies
with the “ Exemption s and Require ments” of IEC
62471-20 06.
5. For ind oor use only.
6. Disconn ect power befo re installati on to prevent ris k of
electronic shock.
7. Do not use whe re directly ex posed to water.
8.Do not use w ith dimmers.
9. The ligh t source of this p roduct are non -change able
light diodes (LED).
10. For lamp s with a weight sig nificantl y higher than th at
of the lamp s for which they a re a replaceme nt,
atten tion should be d rawn to the fact th at the
increa sed weight may re duce the mech anical stabi lity
of cer tain luminair es
and lampholders and may impair contact making and
lamp ret ention.
EU Declaration of Conformity
Hereby, Q ingdao Yeelink I nformation Tech nology Co., Ltd.,
declar es that the radi o equipment t ype MJDPL 01YL is in
compli ance with Dir ective 2014/53 /EU. The full te xt of the
EU decl aration of con formity is avai lable at the fol lowing
internet address: http://www.mi.com/global/service/support/declaration.html
WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and
electronic equipment (WEEE as in directive 2012/19/EU) which
should not be mixed with unsorted household waste. Instead,
you should protect human health and the environment by
handing over your waste equipment to a designated
collection point for the recycling of waste electrical
and electronic equipment, appointed by the
government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to
the environment and human health. Please contact the installer
or local authorities for more information about the location
as well as terms and conditions of such collection points.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Qingdao Yeelink Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: 10F-B4, Building B, Qingdao International
Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District,
Qingdao City, Shandong Province, P.R.China
For further information, please go to www.mi.com
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.