Page 1
10000mAh Mi Power Bank 2S
User Manual
Page 2
Product Overview
Thank you for choosing 10000mAh Mi Power Bank 2S.
This product is a high-capacity portable charger that uses Li-polymer baery, charge
and discharge chip for a safe, efficient, and compatible user experience.
USB Output
USB Output
The Power Check buon is not a Power buon.
10000mAh Mi Power Bank 2S detects charging and discharging automatically.
The Power indicator goes off 2 minutes aer fully discharged.
Micro-USB Input
Power Check
Power Indicator
Safety: Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge,
high temperature, and short circuit protection in all working conditions.
Efficiency: Supports fast charging at 5.1V/2.4A, 9V/1.6A, 12V/1.2A only one output port used. The
total power can be up to 15W when two output ports used together, at 5.1V/2.4A maximum output
for each one.
Compatibility: The product has a built-in USB charging controller, compatible with most smartphones,
tablets, and devices. It supports mainstream fast charging devices and can boost up to 9V/12V.
Quality: Li-polymer baery, charge and discharge chip.
Page 3
Charging
Connect with Mi Power Adapter to charge Mi Power Bank.
The indicator shows charging conditions as follows:
LED1
Blinking
On
On
On
On
Blinking
LED1
LED2
LED3
LED4
Power level
0-25%
25-50%
50-75%
75-99%
Fully charged
Charging error
Discharging
Connect with Mi Power Bank to charge your device.
The indicator shows discharging conditions as follows:
Power level
Undervoltage
0-25%
25-50%
LED1
Off
Blinking
Blinking
LED2
Off
Off
Blinking
LED2
Off
Blinking
On
On
On
Blinking
LED3
Off
Off
Off
LED3
Off
Off
Blinking
On
On
Blinking
LED4
Off
Off
Off
Blinking
On
Blinking
LED4
Off
Off
Off
50-75%
75-100%
Low-current discharge: when Mi Power Bank is not charging, double press the Power Check
buon to enter low-current discharge mode to charge small devices, such as Bluetooth
headphones and smart bands. The indicator LEDs will turn on one by one in succession,
indicating that Mi Power Bank is in low-current discharge mode. To exit low-current
discharge mode, press the Power Check buon.
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Off
Blinking
Page 4
Specifications
Model: PLM09ZM Baery type: Li-polymer baery
Capacity: 10000mAh 3.7V (37Wh) Rated capacity: 6500mAh 5.1V (TYP 1A)
Operating temperature: 0°C~40°C Dimensions: 147 × 71.2 × 14.2 mm
Input port: Micro-USB Output port: USB-A
Input: 5.0V 2.0A/9.0V 2.0A/12.0V 1.5A
Output: Single port 5.1V 2.4A/9.0V 1.6A MAX/12.0V 1.2A MAX
Dual ports 5.1V 2.4A (15W MAX)
Charging time: approx. 3.5 hrs (9V/2A or 12V/1.5A adapter, standard cable);
approx. 5.5 hrs (5V/2A adapter, standard cable)
Note
Make sure your Mi Power Bank is fully charged on its first use.
When charging a device with Mi Power Bank, make sure your device displays the baery
charging icon and the Mi Power Bank is working properly.
When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a
standard charging cable.
If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power
Bank shortly.
When charging a device with Mi Power Bank, the device will use Mi Power Bank's power first.
Disconnect Mi Power Bank to avoid further discharge once your device is fully charged.
When Mi Power Bank enters protection mode (LEDs remain off aer pressing the Power Check
buon) due to short circuit or other reasons, charge it with an external charger to resume.
Warning
Mi Power Bank contains Li-ion baery cell. Do not open the casing to avoid cell damage or other
hazards.
Do not dismantle, crush, puncture and short circuit Mi Power Bank, or expose it to liquids, fire or
environments where the temperature is above 60°C (140°F).
Page 5
CE
Hereby,declares that this equipment is in compliance with the Electromagnetic Compatibility
Directive 2014/30/EU.
Test standards:
EN55032:2015 / EN61000-3-2:2014 / EN61000-3-3:2013 / EN55024:2010
Anti-counterfeit Label Instructions
Each Mi Power Bank comes with an anti-counterfeit label on the outer package.
Scratch the coating and go to hp://chaxun.mi.com to check authentication.
Anti-counterfeit label
Scratched-off label
For further information, please go to www.mi.com
Read this manual carefully before use, and retain it for future reference.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zimi Corporation (a Mi Ecosystem company)
Address: A913, No. 159 Chengjiang Middle Road, Jiangyin, Jiangsu, China
Page 6
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zimi Corporation (a Mi Ecosystem company)
Address: A913, No. 159 Chengjiang Middle Road, Jiangyin, Jiangsu, China
Loading...