This version is for private use only and should not be distributed.
Mi LED Desk Lamp User Manual
This version is for private use only and should not be distributed.
Instruction
1. Unpack the product and plug it into a power supply.
2. Press the knob to turn on the light.
135° Adjustable
Body
Power Hole
Rotary Knob
Power Cable
01
This version is for private use only and should not be distributed.
Press the knob to
Spin the knob to
turn on/off the light
adjust the brightness
Press and spin the knob to
adjust the color temperature
02
This version is for private use only and should not be distributed.
FCC Compliance Statement
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
03
This version is for private use only and should not be distributed.
Warning
1. Please confirm that the input voltage is right. The use of inappropriate voltage may
damage the product and bring safety hazards.
2. For indoor use only.
3. Regularly check the power cord, AC adaptor, and other components . If any parts are
compromised, the product should no longer be used.
4. Use standard adaptors only. Misuse of adaptors may damage the product and bring
safety hazards.
5. Keep the product away from liquids and humid environments.
6. The LED module can not be replaced.
7. Do not disassemble the product. The light-emiing diode may cause damage to your
eyes.
04
This version is for private use only and should not be distributed.
Specifications
Model: MJTD01YL
Color temperature range: 2700-6500K
Operating temperature: -10˚C to 40˚C
Lamp input: 12V 0.5A
Rated input: 100-240V~ 50/60Hz 0.2A
Rated input power: 6W (42pcs×0.15W/LED Module)
Wireless connectivity: Wi-Fi IEEE 802.11b/g/n 2.4GHz
Power factor: 0.4
Luminous flux: 300 lumens
Life expectancy: approx. 25000h
Operating humidity: 0%-85%RH
Compatible with: Android & iOS
FCC ID: 2ABEU-MJTD01YL
Product Features
Eye Protection Adjustable brightness Adjustable color
temperature
On/off TimerFour Lighting ModesThe Focus Mode
Off-delay Timer Mobile Control Firmware Upgrade
05
This version is for private use only and should not be distributed.
Smart Control
1. Scan the QR code below or go to App store to download Mi Home App.
2. Make sure that the lamp is on. Open the application and follow the instructions in
the application.
* Make sure that the Wi-Fi network is available
and is able to access the Internet properly.
Factory Reset
The Reset hole is at the boom of the lamp base. When powered on, insert a straightened
tool into the hole for 5 seconds, and let go when the lamp starts to breathe. The Reset
completes when the breathing stops.
* Factory Reset is required in a new
network environment to reconnect
the network.
06
This version is for private use only and should not be distributed.
Please read the user manual before using the product.
Go to www.mi.com to learn more.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, International Innovation Park, 1 KeYuanWeiYi Road,
Laoshan, Qingdao, Shandong Province, People's Republic of China
Loading...