Mi Handheld Vacuum Cleaner User manual
Mi Handheld Vacuum Cleaner
This version is for private use only and should not be distributed.
User Manual
Safety Information
This version is for private use only and should not be distributed.
Read this manual carefully before use, and retain it for future reference.
Usage Restrictions
• Do not use this vacuum in outdoor, commercial, or industrial environments. It is intended for
home and in-car use only.
• Do not store the vacuum anywhere in the car to avoid high or low temperatures affecting its
battery life.
• Do not use the vacuum in environments with high humidity, or temperatures above 40°C or
below 3°C.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. (CB)
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision. (EU)
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• While using an electric brush head, keep limbs and pets away from the rotating brush heads
to avoid injury.
• Do not touch the power supply, nor operate the product with wet hands to prevent injuries.
• Do not vacuum any liquids (such as water, cola).
• Do not vacuum any burning or smoking substances (such as non-extinguished cigarette
butts).
• Do not vacuum any hard or pointy objects (such as building materials, glass, and nails).
• Please use this product in accordance with the instructions in the User Manual. Users are
responsible for any loss or damage that may arise from improper use of this product.
• This product is only to be used in areas below 3,000 meters above sea level.
01
Battery & Charging
This version is for private use only and should not be distributed.
WARNING
• This product contains batteries that are only replaceable by skilled persons.
• This product can only be charged using an ATC01RR or BTC01RR power supply.
• Do not use any third-party batteries, power adapters or docking stations.
• Do not disassemble, repair or modify the battery, power adapter or the docking station.
• Do not charge the vacuum or install the docking station near heat sources or in humid areas
(such as radiators or bathrooms).
• Do not wipe the adapter or the docking station with a wet cloth, nor touch them with wet
hands.
• If the power cord is damaged or broken, immediately stop using it and contact after-sales
service.
• If the vacuum is not going to be used for an extended period of time, please fully charge it,
unplug its power supply, and place it in a cool and dry place. Make sure that you recharge it
once every three months to avoid the battery to over-discharge.
The lithium ion battery inside this product contains substances harmful to the
environment.
ATTENTION:
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely.Please do not discard waste batteries. Leave them to a
professional organization.
The following steps are only applicable for scrapping:
Removing the Battery:
1. Remove the dust compartment and cyclone assembly, and remove the two screws on the
inner wall of the vacuum near the dust compartment release switch.
2. Remove the top fan filter, and remove the screw used for fixing the cover of the handle on the
inner wall of the vacuum.
3. Open the handle cover along the gap at the top of the handle and gently slide it up to remove
the cover.
4. Unplug the 3 connectors inside the handle from the baery.
5. Slide out the baery pack.
02
Transportation
This version is for private use only and should not be distributed.
• It is recommended to transport the vacuum in its original packaging.
Note
• Rinse the filter at least once a month with tap water. For details please refer to Maintenance.
We Beijing Roborock Technology Co., Ltd., hereby, declares that this equipment is in compliance
with the applicable Directives and European Norms, and amendments. The full text of the EU
declaration of conformity is available at the following internet address:
hp://www.mi.com/global/service/support/declaration.html
03
Product Overview
This version is for private use only and should not be distributed.
Vacuum Cleaner
Top Fan Filter
Dust Compartment
Notes:
1. The paern on the dust
compartment and the
floor aachment is the
parting line formed by
the production process.
It is not a crack or a
production error. Please
feel free to use the
vacuum normally.
2. There may be powder in
the dust compartment
and the cyclone
assembly of the vacuum.
This is not a trace of use,
but a lubricating powder
used for assembly and
optimizing the seal.
Dust Compartment
Opening Switch
Dust Compartment
Release Switch
MAX Button
• Press and hold the switch,
then press the Max button to
change to the vacuum's MAX
mode.
Notes:
1. In MAX mode, the fan will run
at full speed, baery life will be
reduced, and the fan will blow
out hot air.
2. Turning off the vacuum will
automatically revert it to
Standard mode.
MAX-LED: MAX mode indicator
• Off: Standard Mode
• On: MAX mode
On/Off Switch
• Push to turn on
• Release to turn off
LED Battery Status Indicator
• Red: Battery level < 20%
• Orange: Battery level of
20 - 60%
• White: Battery level > 60%
• Off: Battery is fully charged or
the vacuum is turned off.
• Slowly Blinking Orange:
Temporary protection if the
battery temperature is too
high or too low, please wait
for the battery temperature to
return to normal before using
or charging the vacuum.
• Slowly Blinking Red: Low
battery, please charge before
use.
• Quickly Blinking Red: 1. Baery
charging protection, please
unplug the supply for one
minute and plug it in again
to charge; 2. Hardware error
status, please contact aersales service.
Charging Port
04
Accessories
This version is for private use only and should not be distributed.
Power Supply Crevice Nozzle Brush Nozzle
Floor Aachment Bed Aachment
Extension Rod
Installation
Vacuum and Accessories Installation Diagram
Method One
Insert till it clicks
into place
Insert till it
clicks into place
Method Two
Insert till it clicks into place
Push down the quick release
switch to remove it
05
Mi Handheld Vacuum Cleaner Docking
This version is for private use only and should not be distributed.
Station Installation
* The docking station needs to be purchased
separately, please visit: www.mi.com
1. The docking station is an optional
accessory, which can be purchased if
necessary.
2. The docking station needs to be installed
in a cool and dry place that is near a power
outlet but not exposed to direct sunlight.
3. Use the appropriate mounting hardware
for the type of wall, to securely install the
docking station. Make sure the installation
area is clear of any pipes (such as gas,
water, air, electricity, drainage).
Store the vacuum on the docking station
4. It is recommended to hire a professional
to install the docking station and to use
protective clothing, goggles and other
protective materials where necessary.
5. Use a 6 mm drill, to drill holes in the wall
and insert the wall plugs into them. Align
the holes on the docking station with the
ones in the wall, and insert and tighten the
screws.
Screw Wall Plug
Charging Socket
Recommended Height: 1.06 meters from the
ground
Pull the vacuum down in the docking station
to charge
06
Loading...