MGF 905200, 905250 User Manual

This manual has been written according to following directives: 98/37/EEC, 2006/42/EEC, UNI-EN 10893

1

MGF

MGF srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY – Tel. [phone] – Fax [phone]

E-mail:[e-mail]

– Web: www.mgftools.com – www.nebulizzare.com

Art. 905200 – 905250

PRESS Testing Pump

User Manual

rev. 2.0 del 08/10/2018

IIntroduction

ntroduction

This manual, supplied with the machine, provides important instructions for the correct installation, use and maintenance
of the machine.

Reading this manual and complying with the provisions contained therein are necessary conditions for the
validity of the warranty and for the correct and safe operation of the system.

It is the responsibility of the customer to keep this manual, to provide adequate instructions to any user for
the correct use of the system.

The manual is available for download in its latest update at www.mgftools.com

The manufacturer declines all responsibilities for damage caused by negligence and failure to observe the
rules described in this manual.

Purpose of use

Purpose of use

This pump has been engineered for small transplanting and fillings and for plants test with water. The pump can work with

all kind of liquid with a maximum viscosity of 1.5 m Pa s and with water solutions with PH between 7 and 12.

MGF

MGF refuses every responsibility for damages or bad working if the pump is used incorrectly, for a purpose for which it

was not intended or is tampered.

General Informations

General Informations

Art. Modello

905200 PRESS Testing Pump 60 bar 230V

905250 PRESS Testing Pump 60 bar 115V

300020* Unclogging pipe

*Additional accessory not supplied as standard

STANDARD SUPPLY

•

MGF

MGF Press Test pump

• 1/2" high pressure hose (art.300002)

• Suction hose with fitting and filter (art. 960002)

• Use and maintenance manual

2

MGF

MGF srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY – Tel. [phone] – Fax [phone]

E-mail:[e-mail]

– Web: www.mgftools.com – www.nebulizzare.com

TECHNICAL CHARACTERISTICS:

Weight: 13,2 Kg
Dimensions: 200 x 440 x 320 mm
Max. Pressure: 60 bar
Max. Flow Rate: 7 L/min (420L/h)
High pressure hose: 1/2” G F - 1500mm
Voltage: 230 V ~ 50Hz / 115 V ~ 60Hz
Power: 1750W
Service class: S1
Insulation class: IPX5

TECHNICAL DATA

Locate the identification plate on the machine and check that the plate data given in it are in conformity with the contents of
the present table. The nameplate data must be respected during all the foreseen operations.

SERVICE

For any form of technical assistance you can contact us in one of the following ways:

telephone: [phone]
fax: [phone]
email: [e-mail]

We will serve you as soon as possible.
The shipment of material under repair must be previously authorized by means of the RMA form (binding condition for the
collection of any goods under repair).

WARRANTY TERMS

The product warranty covers any manufacturing defect for a period of time equal to one (1) year from the date of
manufacture for products purchased with invoice, 2 years for products purchased by private individuals.
The following clauses expressly exclude the product from guarantee:

• Consumables such as pipes, impellers ..., to the extent that the malfunction is caused by normal wear and tear of the

parts.

• Malfunctions caused by use not in accordance with the instructions provided

• Poor maintenance

• Tampering with or modifying the machine

The company excludes from its responsibility any indirect damage, damage caused to people and things from defects and
downtime, incorrect use, lack of maintenance.

3

MGF

MGF srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY – Tel. [phone] – Fax [phone]

E-mail:[e-mail]

– Web: www.mgftools.com – www.nebulizzare.com

Warnings

Warnings

Read all safety instructions, operating and maintenance instructions, and the technical data of this electric tool.

Failure to follow the instructions may cause electric shock, fire and / or serious injury.

Keep all safety warnings and instructions for future use.

1. Safety of the working environment

1. Keep the workplace clean and well lit. Disorder and a poorly lit workplace can cause accidents.

2. Do not work in explosive atmospheres (ATEX) where flammable liquids, gases or powders are found. The
machine can generate sparks that can ignite dust or steam.

3. Keep children and other people away when using the machine. Hazardous situations can be created both under
normal and unintended conditions.

2. Electrical safety

1. The electrical socket to which the machine is connected must be adapted to the machine plug. The plug must
enter effortlessly.

2. The electric plug must not be changed in any way. Do not use adapters for grounded power tools. Unmodified
plugs and adequate sockets reduce the risk of electric shock.

3. Avoid contact with grounded objects such as pipes, radiators, ovens and refrigerators. The risk of electric shock
occurs if the user is in contact with conductive materials.

4. Keep the machine away from rain, moisture and liquid jets. Water infiltration increases the risk of electric shock.

5. Do not use the power cord for a purpose other than intended, to carry the machine, to hang it or to remove the
plug from the socket. Keep the power cord away from heat, oil, sharp edges or moving objects. Damaged or
entangled cables increase the risk of electric shock.

6. If you work outdoors, use only extension cords that are also suitable for outdoor use. The use of an extension
cable suitable for outdoor use reduces the risk of electric shock.

7. Make sure that the socket is protected by a differential switch (circuit breaker). The use of a fault current safety
switch reduces the risk of electric shock.

3. People safety

1. Working paying attention and with awareness.

2. Do not work when you are tired or under the influence of drugs, alcohol, medicines or psychotropics. Working
exclusively in full psycho-physical capacity can avoid serious injuries.

3. Wear personal protective equipment as directed. Personal protective equipment, such as a dust mask, non­slippery safety shoes, protective helmet and hearing protection, depending on the type and use, reduces the risk
of injury and permanent damage.

4. Avoid accidental starting. Check that the machine is switched off before connecting it to the power supply and /
or the battery, and any operation that does not require ignition, such as transport and maintenance. Accidental
starts can cause serious accidents.

5. Remove adjusting tools or keys before turning on the machine. Fix all the protections and moving parts correctly.
Moving parts that are not properly protected can cause damage to people and property.

6. Avoid improper posture. Make sure you are in a stable position and always maintain balance. Avoid working on
slippery floors. In this way it is possible to react better in case of unforeseen situations.

7. Dress appropriately. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
Anything that can get caught up in moving parts, even if partially protected, can cause serious damage and
injury.

4

MGF

MGF srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY – Tel. [phone] – Fax [phone]

E-mail:[e-mail]

– Web: www.mgftools.com – www.nebulizzare.com