Mettler Toledo XSE, XSE105DU, XSE205DU, XSE104, XSE204 Quick Manual
www.mt.com
XSE204
F
F
METTLER TOLEDO
Excellence Analytical Balances
Quick Guide
XSE Models
Table of Contents
Introduction1 5
Safety Information2 6
Design and Function3 8
Installation and Putting into Operation4 17
Maintenance5 25
Technical Data6 26
Explanation of warnings and symbols2.1 6
Product safety information2.2 6
Overview3.1 8
Balance3.1.1 8
Terminal3.1.2 10
User interface3.2 11
Display3.2.1 11
Input dialog boxes3.2.2 12
Text and number entry3.2.2.1 13
Firmware3.2.3 13
User-specific settings3.2.3.1 13
Applications3.2.3.2 14
Application-specific settings3.2.3.3 15
System settings3.2.3.4 15
Security system3.2.4 16
Unpacking4.1 17
Scope of delivery4.2 18
Location4.3 19
Assembling the balance4.4 19
Connecting the balance4.5 21
Setting up the balance4.6 22
Weighing for the first time4.6.1 22
Switching on the balance4.6.1.1 22
Leveling the balance4.6.1.2 22
Performing a simple weighing4.6.1.3 23
Handle for operation of the side draft shield doors4.6.2 23
Cleaning5.1 25
General data6.1 26
Explanatory notes for the METTLER TOLEDO AC adapter6.2 26
Model-specific data6.3 27
Dimensions6.4 30
Table of Contents 3
1Introduction
Thank you for choosing a METTLER TOLEDO balance.
This balance offers numerous weighing and adjustment options with exceptional operating convenience.
METTLER TOLEDO is a leading manufacturer of balances for laboratory and production use as well as analyti
cal measuring instruments. A globally present customer service network with highly trained personnel is always
available to assist with the selection of accessories or provide advice on the optimal use of the balance.
Various models offering different performance features are available. Models offer different weighing ranges and
resolutions. Special reference is made to these features in these instructions if important for operation.
The following features are common to all models of the XSE line:
●
Fully automatic adjustment "ProFACT" using internal weights.
●
Built-in level sensor, illuminated level indicator and Leveling Assistant for fast and easy leveling.
●
Built-in applications for normal weighing, statistics, formulation, piece numbers, percent weighing, density
determination, differential weighing, pipette test and titration.
●
Integral RS232C interface.
●
Slot for second interface (optional).
●
Touch-sensitive graphic terminal ("Touch screen") with color display.
The balance conforms to current standards and directives. It supports requirements, work techniques and proto
cols as specified by all international quality assurance systems, e.g. GLP (Good Laboratory Practice), GMP
(Good Manufacturing Practice). The balance has a CE Declaration of Conformity and METTLER TOLEDO, as the
manufacturer, is certified to ISO 9001 and ISO 14001. This provides the assurance that your capital investment
is protected in the long term by high product quality and a comprehensive service package (repairs, mainte
nance, servicing, adjustment service).
Finding more information
u www.mt.com/excellence
Detailed operating instructions are on the CD-ROM.
Software version
These operating instructions refer to the originally installed firmware (software) version V 1.00.
5Introduction
2Safety Information
2.1Explanation of warnings and symbols
Safety notes are indicated by signal words and warning symbols and contain warnings and information about
safety issues. Ignoring safety notes can lead to personal injury, damage to the instrument, malfunctions and
erroneous results.
Signal words
WARNING for a hazardous situation with medium risk, possibly resulting in severe
injuries or death if not avoided.
CAUTION for a hazardous situation with low risk, resulting in damage to the device or
the property or in loss of data or minor or medium injuries if not avoided.
Attention (no symbol)
for important information about the product.
Note (no symbol)
for useful information about the product.
Warning symbols
General hazard Electrical shock
Mandatory signs
2.2Product safety information
Intended use
Your balance is used for weighing. Use the balance exclusively for this purpose. Any other type of use and
operation beyond the limits of technical specifications without written consent from Mettler-Toledo AG, is con
sidered as not intended.
It is not permitted to use the instrument in explosive atmosphere of gases, steam, fog, dust
and flammable dust (hazardous environments).
General safety information
This balance complies with current industry standards and the recognized safety regulations; however, it can
constitute a hazard in use. Do not open the balance housing: The balance contains no user-serviceable parts.
In the event of problems, please contact a METTLER TOLEDO representative.
Always operate and use your instrument only in accordance with the instructions contained in this manual. The
instructions for setting up your new instrument must be strictly observed.
If the instrument is not used according to these Operating Instructions, protection of the instrument may
be impaired and METTLER TOLEDO assumes no liability.
Gloves must be worn
Staff safety
These operating instructions must be read and understood before using the balance. These operating instruc
tions must be retained for future reference.
The balance must not be altered or modified in any way. Only use METTLER TOLEDO original spare parts and
accessories.
6 Safety Information
Safety notes
WARNING
Risk of electric shock
Use only the original universal AC adapter delivered with your balance, and check that the
voltage printed on it is the same as your local power supply voltage. Only plug the adapter
into a socket which is grounded.
CAUTION
Damage to the balance
a) Only use indoors in dry locations.
b) Do not use pointed objects to operate the keyboard!
The balance is of a very sturdy design, but is still a precision instrument. It must be han
dled with care.
c) Do not open the balance:
The balance contains no user-serviceable parts. In the event of problems, please contact
a METTLER TOLEDO representative.
d) Only use METTLER TOLEDO original accessories and peripheral devices for the balance.
These are specifically designed for the balance.
7Safety Information
3Design and Function
METTLER TOLEDO
1
2
3
4
5
7
6
3
8 9
10
11
12
13
www.mt.com
XSE204
F
F
METTLER TOLEDO
This section describes the balance, operating and indicating elements of the terminal and the operating concept
of the balance firmware.
3.1Overview
3.1.1Balance
Balance with rear connections.
Front view
1 Terminal 2 Display (touch-sensitive "Touch screen")
3 Operating keys 4 Drip tray
5 Handle for operating the draft shield side
6 Type designation
doors
7 Glass draft shield 8 Handle for operation of the top draft shield
door
9 Guide for top draft shield door and transport
handle
11 Level indicator/Level sensor 12 SmartGrid weighing pan
13 Status indicator
10 Removable clips for feeding cables or hoses
8 Design and Function
6
7
5
4
3
2
1
Rear
1 Aux 1 (connection for "ErgoSens", hand or foot
switch)
2 Aux 2 (connection for "ErgoSens", hand or foot
switch)
3 RS232C serial interface 4 Slot for second interface (optional)
5 Socket for AC adapter 6 Fastening point for anti-theft device
7 Foot screw
9Design and Function
3.1.2Terminal
8
7
5
6
1
2
3
4
Key assignments and terminal connection.
Front view
Designation Explanation
1 Home This key is used to return to the user profile from any menu level
in any application. All changes made and confirmed up to this
point are automatically stored.
2 Select application This key is used to select a required application.
3 Configuration For displaying menus for the configuration of a current applica
tion. The application can be adjusted to a specific task via
numerous settings.
4 Pressure This key is used to transfer data via the interface, e.g. to a print
er. Other devices, e.g. a PC can also be connected. The data to
be transferred can be freely defined.
5 On/Off For switching the balance on and off (standby mode).
Note
It is recommended not to disconnect the balance from the power
supply unless it is not used for an extended period.
6 Tare This key is used to tare the balance manually (only necessary
for normal weighings). When the balance has been tared, the
Net symbol is displayed to indicate that all displayed weights
are net.
Note
A negative weight is not permitted. An error message is generat
ed.
When the stability detector icon extinguishes (small ring on the
left of the weight display), a stable weight is indicated.
The procedure for taring the balance is not the same as for zero
ing.
10 Design and Function
Loading...