Mettler Toledo XS304, XS204DR, XS205DU, XS225DU, XS64 Data Sheet
...
Short Operating Instructions
For further information, please refer to the operators Manual
METTLER TOLEDO
XP / XS Analytical- and Precision Balances
Basic Functions:
Switching on
and off
Display
1. Swi tch o n di sp lay:
Press the «O n/O ff»
key briefly. The display
performs a test and is
then ready to weigh.
On
Off
2. Switch off Disp lay ;
Press and hold the
«On/Off» key until the
message “OFF” appears in the display.
The display then fades
and the balance is
switched off.
On
Off
User Profile: *only XP
Choose
User Profile
B
This key can be used to
call up the desired user
profile. Different settings
can be stored in a user
profile.
Example
Zero
Display
Ze roi ng: Pr ess t he
«G» to set a new
zero point.
G
Always use the «G»
befo re you s tart the
weighing procedure.
Weighing Setup: For more precision / shorter stability time
Weighing filters:
Weighing mode
1. Choose System-Setup
Tare
Display
Taring: If you work with
a Tare container, first
zero the balance. Then
put the Tare container
on the balance and
press «H», to tare
the balance.
H
Weighing filters:
Environment
1. Choose System-Setup
C C C
2. Define Weighing parameters
3. Define the Weighing
mode
Advise:
Solids:
«Universal»
Powder, Liquid:
«Dosing»
2. Define Weighing parameters
3. Define Environment
Advise:
Fume cupboard – unstable weighing table:
«
Unstable»,
«Very unstable»
Stable Weighing table,
no drafts
«Standard», «Stable»
WeighingApplications
XS Balance
I
XP Balance
D
Choose the applica tio n: If yo u w ant to
change the application,
then press the application menu button and
choose a nother a pplication.
Weighing filters:
Value Release
1. Choose System-Setup
2. Define Weighing parameters
3. Define Value Release
Advise:
Highest Precision:
«Very reliable»
Fast Value Release:
«Very fast»,
but less precision
Test:Additional Functions:
Levelling, Internal
Adjustment
(Factory setting)
1. Level indicator is builtin in the device.
2. Level indicator is not
centered.*
3. Release the clamps.*
4. Levelling. After this process, lock the clamps
again.*
5. Internal Adjustment
Pressing this function
key triggers a balance
adjustment using the
bu ilt -in ca lib rat ion
wei ght. This ca n b e
imp lemented at any
time.
* depend the balance
EXCELLENCE PLUS
METTLER TOLEDO Excellence Plus and Excellence Balances
Overview of the Terminal XP Analytical- and Precision balances:
XP Display Terminal
1. Button SmartSens:
Each of these tw o
contact-free sensors
can be assigned a key
or menu function.
2. Button Home:
This key can be used
to return to the “Home”
user profile from any
menu level in any
application.
3. Button User profile:
This key can be used
to call up the desired
user profile. Different
settings can be stored
in a user profile.
Overview of the Terminal XS Analytical- and Precision balances:
XS Display Terminal
1
2
3
4
5
4. Status bar:
If the left or right
SmartSe ns is assigned a key function, then the corresponding symbol
is highlighted.
On touch
- e.g. start the internal adjustment
5. System-Setup:
Define the bas ic
settings.
6. Select the application.
7. Button ApplicationsSetup:
Each appli cat ion
can be optimized
to the current task
using a number of
settings.
One touch
- change the time
8. Printer:
Pressin g this key
1
6
7
4
8
transmits data via
the interface.
1. Button Home:
This key can be used
to return to the “Home”
user profile from any
menu level in any
application.
2. Weighing application:
By pressing this symbol
you can choose the
desired application.
3. Button ApplicationsSetup:
Each application can
be ideally adapted to
the current task using
a number of settings.
© Mettler-Toledo AG 2007 11781027 Printed in Switzerland 0707/7.12
Mettler-Toledo AG, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland
Phone +41-44-944 22 11, Fax +41-44-944 30 60, Internet: http://www.mt.com
1
2
4. Printer:
Pressin g this key
transmits data via
the interface.
On touch
- e.g. start the internal adjustment
3
4
*11781027*
Loading...