Mettler Toledo MA15s, MCC150, MA30s, MCC300, MB60 Operating Instructions Manual
Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use according to this Operating Manual and regular calibration and maintenance by our factory-trained service team ensure dependable and accurate operation, protecting your investment.
Contact us about a ServiceXXL agreement tailored to your needs and budget.
We invite you to register your product at www.mt.com/productregistration
so we can contact
you about enhancements, updates and important notifications concerning your product.
*22006480B*
22006480B
Subject to technical changes © Mettler-Toledo (Albstadt) GmbH 03/06 Printed in Germany 22006480B
Mettler-Toledo (Albstadt) GmbH
D-72458 Albstadt
Tel. ++49-7431-14 0, Fax ++49-7431-14 232
Internet: http://www.mt.com
Operating instructions
METTLER TOLEDO MultiRange
Table and stand scales
MA15s/MA30s
MB60/MCC150/MCC300
www.mt.com/support
11
Ignition protection type II 3G Ex nA II T6
–10 °C ≤ T
a
≤ +40 °C
II 3D T 50 °C
The following safety-related variables must be ensured by the
connected weighing terminal:
Supply circuit U
max
≤ 20 V DC
Interface circuit U
max, CL
≤ 27 V DC
I
max, CL
≤ 30 mA
IP protection type IP67
Power consumption 12 V DC ± 20 %; 125 mA; 1.8 VA
In conformance with the European Directive 2002/96/ EC on Waste
Electrical and Electronic Equipment (WEEE) this device may not be
disposed of in domestic waste.
This also applies to countries outside the EU, per their specific
requirements.
➜ Please dispose of this product in accordance with local regulations
at the collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or
the distributor from which you purchased this device.
Should this device be passed on to other parties (for private or
professional use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
7 Technical data
8 Disposal
Loading...