Metro WMF-CPUL Installation Manual
INSTALLATION INSTRUCTIONS
WMF-CPUL
MetroMount™ Large CPU Cradle
INSTALLATION WARNINGS: Read the entire instruction sheet before you begin installation or assembly.
Installer must verify that the wall will safely support the combined weight of all the attached equipment and
hardware. Improper installation of this product can cause extensive property damage or serious personal
injury, either during or after the installation. It is the responsibility of the installer to ensure that all applications
including wood, concrete, block, brick, steel, etc. are secured properly to code. California installations could
require specic anchorage, and additional mounting screws. Check with local authorities for codes in your
area. Other seismic states have similar regulations.
DISCLAIMER: The Manufacturer and/or Distributor will bear no responsibility for any damages of any kind
arising from any improper installation of this product. Because wall construction varies widely and the
ultimate method of mounting is out of the Manufacturer’s or Distributor’s control, it is imperative that the
installer consult with local engineering, architectural, or construction personnel to ensure the wall mount is
constructed properly and to code to handle the applied load.
1.0
Slide the CPU
carriage onto
the track.
3.0
Press in track
end cap.
2.0
Secure the
carriage to the
track.
4.0
Use thumb
knobs to adjust
opening to
required width.
InterMetro Industries Corporation
651 North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
LO7-099e
Loading...