High-Density Storage — qwikTRAK
™
Metro® High-Density Active Aisle Storage Systems
When adding space isn’t an option, the answer is to make your existing space more effi cient using
™
Metro qwikTRAK
Combine movable aisles and stationary end units — utilizing all available space. Eliminate the need for costly facility expansion.
Increase your storage capacity by as much as 50%!
or Top-Track high-density active aisle systems!
qwikTRAK™ High-Density Storage (pages 94-95)
Ergonomic and Accessible:
Positioned between stationary
end units, mobile units glide
easily along a low profi le,
aluminum and stainless steel
track on grooved casters. The
sloped sides of the track allow
easy access to the Active Aisle.
92
The “Active Aisle” is created
by rolling the mobile units
along the track.
• Easiest to assemble: Shelving units assemble in minutes. The guiding fl oor track is
easily positioned between two end units, which anchor the system and the guiding
track to the fl oor.
• Easy to move and store heavy loads. MetroMax mobile qwikTRAK units can hold
up to 1,200 lb. (544kg). MetroMax Q, Super Adjustable
qwikTRAK units can hold up to 2,000 lb. (907kg). All stationary units can hold up to
2,000 lb. (907kg). Mobile units are easy to move with heavy weight loads.
• Double Deep confi gurations can be created where two systems are joined together
to increase the overall depth of the storage system for even greater storage capacity.
• Choose the shelving type based on the application. Both single and double deep
systems can be used with Metro wire shelving (Super Erecta or Super Adjustable
Super Erecta) and polymer shelving systems (MetroMax and MetroMax Q).
• Retrofi t existing Metro shelving: Existing Metro wire shelving systems and polymer
shelving systems can be easily converted to qwikTRAK high-density storage. Please
consult your Metro representative.
Rough or choppy fl oor
surfaces are best addressed
by fl oor tracks.
™
2
, and Super Erecta mobile
™
2
1 - 8 0 0 - 4 3 3 - 2 2 3 2
High-Density Storage — Top-Track
Things to consider when selecting a high-density storage system:
• Cleaning and maintenance of fl oors: importance, frequency.
• Type and condition of fl oor surface.
• Dry or wet environment. Consult a Metro representative for the proper shelving type for the application.
• Amount of weight being stored and moved on mobile units.
• Will existing Metro shelving units be retrofi tted as part of the high-density application?
• Will utility carts be used while accessing the active aisle?
T op-Track™ High-Density Storage (pages 96-100)
™
Uneven fl oor surfaces or
applications requiring intense
cleaning of the fl oor area are best
addressed by Top-Track.
• No fl oor track allows utility carts to easily roll into and out of the active aisle.
• Easy to assemble: Shelving units assemble in minutes. Tracks attach to support
rails on each stationary end unit and above the mobile units.
• Weight capacities on mobile units are limited to 900 lb. (410kg). Stationary units
hold up to 2,000 lb. (907kg)
• Choose the shelving type based on your application.
• Top-Track (single deep) can be used with Metro wire shelving (Super Erecta or
Super Adjustable
MetroMax Q).
• Double Deep confi gurations can be created where two systems are joined
together to increase the overall depth of the storage system for even greater storage
capacity. Double Deep Top-Track is only available for Super Erecta and Super
Adjustable
2
™
2
Super Erecta) and polymer shelving systems (MetroMax and
™
Super Erecta style shelving.
The “Active Aisle” is created by
rolling the mobile units along
the track.
w w w . m e t r o . c o m
Roller bearings on the top of
the posts guide mobile units in
a straight line inside the track.
93
Loading...