Metro LTSD6 User Manual

L a b s o L u t i o n s

Item # ___________________________________

Metro® LAB SOLUTIONS

Metro’s new line of stainless laboratory solutions address
a wide range of laboratory requirements while providing
corrosion proof performance, ensuring long life and maximum
value for your investment. Metro’s innovative product
designs are extremely versatile and allow you to reconfigure,
add-on, or break-down product as your needs change over
time. Laboratory solutions are designed to fit any budget
by permitting the user to select from a wide range of caster
solutions, based on budget and/or application requirements.
Metro’s Stainless Laboratory Solutions include:

• Stainless Worktables designed specifically for
Lab environments.

• All-stainless solid shelves designed for cart wash and
autoclave applications.

• All-stainless lab carts featuring corrosion-proof
performance.

• All-stainless mouse cage racks designed specifically for
Animal Research environments.

• High temperature casters designed for cart wash and
autoclave applications.

• Autoclave cart covers.

• Strong, Durable Construction: Built primarily from Type
304 stainless, Metro’s Laboratory Solutions provide
long-life performance and excellent corrosion resistance.
Innovative product designs ensure unit rigidity and
optimum load bearing performance.

• Easy to Assemble: Units are shipped knocked down
and assemble in minutes. Solid shelves utilize a tapered
sleeve which provides a positive lock for shelves when
pushed down. Table construction also utilizes tapered
sleeve approach, as well as innovative double-sided tape
to affix various top materials.

• Versatile: Metro Lab Solutions can change as quickly
as your needs change. By using various accessories,
including multiple caster options, many different product
configurations become possible.

• Laboratory Considerations: Product designs feature
smooth surfaces that are easy to wipe down. A number
of the cart solutions and accessories are designed
to be cart-washed or autoclaved to ensure optimum
cleanliness. Product footprints are designed to be
compact to accommodate lab space constraints and to
capitalize on technological miniaturization trends towards
smaller equipment and instruments.

Job _____________________________________

LTSM60UIS with accessories and casters

LTSM30IS with casters

LC2S2436 with autoclave casters

5MHTP and 5MHTPB
(Hi-temp phenolic autoclave casters)

Laboratory soLutions — stainLess

52.03

9.01

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

Specifications

Countertop (Lab Worktables):

Stainless Steel Tops: 16 gauge (.060) thick, Type 304

Stainless Steel, #3 Polish with vinyl protection. Island
tops have bull nose front and back edge. 4" (102mm)
high brake-formed backsplash on backsplash models.

Phenolic Top: TRESPA Top Lab Plus (black or gray)
phenolic resin.

Phenolic Backsplash: TRESPA Athlon (black or gray)
phenolic resin.

Bottom Shelf: 16-gauge T-304 stainless steel. 30" x
30" (760 x 760mm) work tables have 24" x 24" (610 x
610mm) bottom shelves; 30" x 36" (760 x 914mm) work
tables have 24" x 30" (610 x 760mm) bottom shelves; 30"
x 48" (760 x 1219mm) work tables have 24" x 42" (610
x 1066mm) bottom shelves; 30" x 60" (760 x 1524mm)
work tables have 24" x 54" (610 x 1370mm) bottom
shelves.

L a b s o L u t i o n s

Bottom Frame: Three-sided 16-gauge stainless tubular
frame. 30" x 30" (760 x 760mm) work tables have 24"
x 24" (610 x 610mm) bottom frames; 30" x 36" (760 x
914mm) work tables have 24" x 30" (610 x 760mm)
bottom frames; 30" x 48" (760 x 1219mm) work tables
have 24" x 42" (610x1066mm) bottom frames; 30" x
60" (760 x 1524mm) work tables have 24" x 54" (610 x
1370mm) bottom frames.

Posts: Steel posts have an outside diameter of 15⁄8"
(38mm), with rolled grooves in 2" (51mm) increments
along entire height. Mobile posts include an adapter

insert that can accept any standard Metro 5M series
casters. (Casters ordered separately.)

Stainless Lab WorkTables

• Stainless steel construction throughout provides corrosion-proof performance.

• Table features smooth surfaces that are easy-to-clean. Mobile units can be
easily moved to clean behind table area.

• Available top materials include Type 304 stainless and TRESPA phenolic resin
(black or gray). Refer to chart below for more information.

• Choose from a wide range of accessories and caster options (page 4) to
customize table.

Countertop Application Matrix

Epoxy Phenolic Stainless Epoxy Phenolic Stainless
Use Area

Heat Resistance Excellent Fair* Excellent

Low chemical use Abrasion Resistance Good Excellent Good

Moderate chemical use X X Impact Resistance Good Excellent Good

High chemical use X X Strength Good Excellent Good

Stain Resistance Good Good Good

*Discolors with high heat

Note: Phenolic resin and stainless are offered as top options for this table system. Epoxy resin information is shown for comparison only.

Definitions:

Phenolic resin: Compression molded of organic fiber-reinforced phenolic core with an

integrally cured thermoset resin surface. Stronger than Epoxy resin over a span, and not
as brittle.

Resin Resin Steel Characteristics Resin Resin Steel

LTS30US with accessory stainless
wire shelf

Stainless Steel: Worksurfaces are fabricated from Type 304 stainless steel which
provides excellent protection in corrosive environments.

Epoxy resin: Epoxy resins, silica, organic fillers, and inert hardeners are cast in forms
and cured to a uniform mixture throughout.

2

LTSM30IS with casters

L a b s o L u t i o n s

Select Table Style from Chart Below and Following Page:

Lab Tables with Stainless Island Top and Solid HD Shelf

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30IS LTSM30IS 30.000 762 29.750 755 35.375 898 35.188 893 65 30
LTS36IS LTSM36IS 30.000 762 35.750 908 35.375 898 35.188 893 80 36
LTS48IS LTSM48IS 30.000 762 47.750 1212 35.375 898 35.188 893 103 47
LTS60IS LTSM60IS 30.000 762 59.750 1517 35.375 898 35.188 893 140 63

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

Lab Tables with Stainless Island Top and 3-Sided Frame

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30UIS LTSM30UIS 30.000 762 29.750 755 35.375 898 35.188 893 58 26
LTS36UIS LTSM36UIS 30.000 762 35.750 908 35.375 898 35.188 893 70 32
LTS48UIS LTSM48UIS 30.000 762 47.750 1212 35.375 898 35.188 893 91 41
LTS60UIS LTSM60UIS 30.000 762 59.750 1517 35.375 898 35.188 893 119 54

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

LTSM30IS with casters
(ordered separately)

Lab Tables with Stainless Backsplash Top and Solid HD Shelf

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30S LTSM30S 30.000 762 29.750 755 35.375 898 35.188 893 65 30
LTS36S LTSM36S 30.000 762 35.750 908 35.375 898 35.188 893 80 36
LTS48S LTSM48S 30.000 762 47.750 1212 35.375 898 35.188 893 103 47
LTS60S LTSM60S 30.000 762 59.750 1517 35.375 898 35.188 893 140 63

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

Lab Tables with Stainless Backsplash Top and 3-Sided Frame

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationar y Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30US LTSM30US 30.000 762 29.750 755 35.375 898 35.188 893 58 26
LTS36US LTSM36US 30.000 762 35.750 908 35.375 898 35.188 893 70 32
LTS48US LTSM48US 30.000 762 47.750 1212 35.375 898 35.188 893 91 41
LTS60US LTSM60US 30.000 762 59.750 1517 35.375 898 35.188 893 119 54

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

Lab Tables with Black Phenolic Top and Solid HD Shelf
(Backsplash accessory ordered separately)

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30PB LTSM30PB 30.000 762 29.750 755 36.000 914 35.875 911 77 35
LTS36PB LTSM36PB 30.000 762 35.750 908 36.000 914 35.875 911 92 41
LTS48PB LTSM48PB 30.000 762 47.750 1212 36.000 914 35.875 911 113 51
LTS60PB LTSM60PB 30.000 762 59.750 1517 36.000 914 35.875 911 141 64

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

LTSM60UIS with accessories
and casters

LTS30US with accessory wire shelf

3

L a b s o L u t i o n s

Stainless Lab Tables (cont’d.)

Lab Tables with Black Phenolic Top and 3-Sided Frame
(Backsplash accessory ordered separately)

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30UPB LTSM30UPB 30.000 762 29.750 755 36.000 914 35.875 911 70 32
LTS36UPB LTSM36UPB 30.000 762 35.750 908 36.000 914 35.875 911 82 37
LTS48UPB LTSM48UPB 30.000 762 47.750 1212 36.000 914 35.875 911 101 46
LTS60UPB LTSM60UPB 30.000 762 59.750 1517 36.000 914 35.875 911 120 54

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

Lab Tables with Gray Phenolic Top and Solid HD Shelf

(Backsplash accessory ordered separately)

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationar y Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30PG LTSM30PG 30.000 762 29.750 755 36.000 914 35.875 911 77 35
LTS36PG LTSM36PG 30.000 762 35.750 908 36.000 914 35.875 911 92 41
LTS48PG LTSM48PG 30.000 762 47.750 1212 36.000 914 35.875 911 113 51
LTS60PG LTSM60PG 30.000 762 59.750 1517 36.000 914 35.875 911 141 64

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

LTSM60UPB with accessories, casters,
backsplash accessory, and
Starsys™ cart

Lab Tables with Gray Phenolic Top and 3-Sided Frame
(Backsplash accessory ordered separately)

Work Surface Height Approx.
Cat. No. Cat. No. Width Length Stationary Mobile Pkd. Wt.
Stationary Mobile (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)

LTS30UPG LTSM30UPG 30.000 762 29.750 755 36.000 914 35.875 911 70 32
LTS36UPG LTSM36UPG 30.000 762 35.750 908 36.000 914 35.875 911 82 37
LTS48UPG LTSM48UPG 30.000 762 47.750 1212 36.000 914 35.875 911 101 46
LTS60UPG LTSM60UPG 30.000 762 59.750 1517 36.000 914 35.875 911 120 54

Leveling feet on stationary units have 1.250 (31mm) vertical adjustment.
Casters ordered separately. Refer to Caster Selection Guide (page 4) for more information.
Stainless Lab Tables are load rated at 50 lbs. per sq. foot (.024kg per sq. cm) up to a maximum of 600 lbs. (273kg) assuming evenly
distributed load and caster specification meets requirement.

LTSM60UPG with accessories, casters,
backsplash accessory, and
Starsys™ cart

For Mobile Stainless Lab Tables, Select Appropriate Casters from
Caster Selection Guide, below:

(Four brake casters are recommended for maximum table stability)

Caster Selection Guide

Load Rating Corrosion Cart Antimicrobial
Caster Series Wheel Material Rollability Floor Protection Noise (lbs.) (kg) Resistance Washable Additive in Wheel

5MDA/5MDBA (brake) High Modulus Rubber Good Good Low 250 114 Low No No
5MP/5MPB (brake) Polyurethane Good Good Moderate 300 137 Low No No
5PC/5PCB (brake) Polyurethane Good Good Moderate 300 137 High No No
5PCM/5PCBM (brake) Polyurethane Good Good Moderate 300 137 High No Yes

5MPGSA/5MPGSA (brake) Polyurethane Good Good Moderate 300 137 High Yes No

NOTE: The total weight of the equipment and its load should not exceed three times the load rating per caster.

Additional stem casters, in various sizes and wheel materials, are available. Contact your Metro rep for more information.

5MDA 5MP 5PCB 5PCBM 5MPGSA

Note: Use heavy-duty mobile post adapter (Cat. No. 9974HDP-4) to convert HD Mobile post to accept any standard Metro 5M series casters (shown above).

4

L a b s o L u t i o n s

Choose from Available Accessories to Customize Table

Backsplash

4" (102mm) high. Attaches to phenolic table
top (page 3), using pre-drilled holes. Match
length and color with selected countertop.

Approx.
Cat. No. Cat. No. Length Pkd. Wt.
Black Gray (in.) (mm) (lbs.) (kg)

LT30BSB LT30BSG 273/4 705 5.5 2.5
LT36BSB LT36BSG 333/4 875 6.5 2.9
LT48BSB LT48BSG 453/4 1162 7.5 3.4
LT60BSB LT60BSG 573/4 1466 9.5 4.3

Wire Shelf

Stainless shelves mount on 3-sided frames
with use of clips.

Approx.
Cat. No. Fits Shelf Length Pkd. Wt.
Stainless (in.) (mm) (lbs.) (kg)

LT30WS 223/8 568 6 2.7
LT36WS 283/8 720 7.5 3.4
LT48WS 403/8 1025 10 4.5
LT60WS 523/8 1330 12 5.4

Note: Shelves are load rated for a maximum of 150 lbs. (68kg).

L30BSG

LT30WS

Stainless Keyboard Tray

Fits 48" and 60"
(1219 and 1524mm)
table lengths
Cat. No. LTSKB

Note: Stainless keyboard tray and stainless

drawer will both fit 60" (1524mm) long table.

LTSKB

Stainless Drawer

Fits 30", 36", 48" and
60" (760, 914, 1219,
and 1524mm)
table lengths
Cat. No. LTSD6

Note: Stainless keyboard tray and stainless

drawer will both fit 60" (1524mm) long table.

LTSD6

Surface Mount Swing Arm for Flat Monitor

Mounts on stainless and phenolic tops.
Cat. No. LTFMA

LTFMA

5

Super Erecta Shelf® All-Stainless Solid Shelving

®

• Solid shelving is available in four widths and six lengths

• All-stainless, 18-gauge steel construction with 1/8" (3mm) ship’s
edge detail helps contains spills

• All-stainless design, including stainless cast corners, can be used
in cart wash and autoclave environments. Refer to autoclave
guidelines on page 8.

• New accessories include high-temperature autoclave casters
and autoclave cart covers. See page 8 for more information.

Solid Shelves

Approx.
Cat. No. Width Length Pkd. Wt.
Stainless (in.) (mm) (in.) (mm) (lbs.) (kg)

1424NFS 14 355 24 610 8.2 3.7
1430NFS 14 355 30 760 10.2 4.6
1436NFS 14 355 36 914 12.8 5.8
1442NFS 14 355 42 1066 13.3 6.0
1448NFS 14 355 48 1219 15.1 6.8
1460NFS 14 355 60 1524 19.8 9.0
1824NFS 18 457 24 610 10.6 4.8
1830NFS 18 457 30 760 12.6 5.7
1836NFS 18 457 36 914 14.8 6.7
1842NFS 18 457 42 1066 16.3 7.4
1848NFS 18 457 48 1219 17.8 8.1
1860NFS 18 457 60 1524 22.3 10.1
2124NFS 21 530 24 610 12.1 5.5
2130NFS 21 530 30 760 14.3 6.5
2136NFS 21 530 36 914 16.3 7.4
2142NFS 21 530 42 1066 21 9.5
2148NFS 21 530 48 1219 22.3 10.1
2160NFS 21 530 60 1524 25 11.3
2424NFS 24 610 24 610 13.3 6.0
2430NFS 24 610 30 760 15.3 6.9
2436NFS 24 610 36 914 19 8.6
2442NFS 24 610 42 1066 20.3 9.2
2448NFS 24 610 48 1219 22.9 10.4
2460NFS 24 610 60 1524 30.3 13.7

Important: When ordering by components remember that stability decreases as the ratio of

Note: Demo corner sample can be obtained by ordering Cat. No. DEMO-NFS.

Stainless Steel Shelf Ledges

Sturdy 4" (101mm) ledges contain items on shelves.
Spring-clip tabs included for attachment.

Approx. Pkd. Wt.
Cat. No. Fits Shelf Length Per 6 Pieces
Stainless (in.) (mm) (lbs.) (kg)

L14WS 14 355 71/2 3.4
L18WS 18 457 9 4.1
L21WS 21 530 101/2 4.7
L24WS 24 610 12 5.4
L30WS 30 760 131/2 6.0
L36WS 36 914 161/2 7.4
L42WS 42 1066 191/2 8.7
L48WS 48 1219 221/2 10.1
L60WS 60 1524 30 13.5

*Actual ledge length is approximately 1" (25mm) shorter than nominal shelf length/width.

Stainless Steel Shelf Dividers

The easy way to keep shelves orderly. Eight inch (203mm)
high dividers attach with spring clips (provided).

Approx. Pkd. Wt.
Cat. No. Fits Shelf Length Per 6 Pieces
Stainless (in.) (mm) (lbs.) (kg)

DD18FS 18 457 131/2 6.0
DD24FS 24 610 161/2 7.4

6

height to width increases. Units should be kept as wide and low as possible.

L a b s o L u t i o n s

All stainless
solid shelf
with stainless
corners

4" (101mm) Ledges

Shelf Dividers

L a b s o L u t i o n s

A. For Stationary Shelving Applications

Combine required shelf sizes above with stainless posts (4), below.
Stainless posts are fitted with adjustable leveling bolts to compensate
for uneven surfaces.

Approx.
Cat. No. Cat. No. Height* Pkd. Wt.
Chrome Stainless (in.) (mm) (lbs.) (kg)

7P — 71/2 195 1/2 0.3
13P 13PS 141/2 370 1 0.5
27P 27PS 271/2 700 13/4 0.75
33P 33PS 341/2 875 2 0.9
54P 54PS 549/16 1385 3 1.4
63P 63PS 629/16 1590 31/2 1.6
74P 74PS 745/8 1895 4 1.8
86P 86PS 865/8 2200 5 2.3
96P — 965/8 2454 51/2 2.5

*Height includes leveling bolt and cap.

SiteSelect™ Posts
are grooved at 1"
(25mm) increments
and numbered at 2"
(50mm) increments.
Posts are double­grooved every 8"
(203mm) for easy
identification.

B. For Mobile Applications

Combine required shelf sizes
above with stainless mobile posts
(4), below. Mobile posts accept a
wide range of Metro stem casters.
Refer to page 4, Caster Selection
Guide, for caster selection options
or contact your local Metro Rep
for more information

Approx.
Cat. No. Height Pkd. Wt.
Stainless (in.) (mm) (lbs.) (kg)

27UPS 271/2 699 13/4 0.75
33UPS 337/8 861 2 0.9
54UPS 54 1370 3 1.4
63UPS 62 1575 31/2 1.6
74UPS 74 1880 4 1.8
86UPS 86 2185 4.5 2.0

These posts come without leveling bolt assembly to
accommodate stem casters.

C. For Cart Wash (Mobile) Applications

Combine required shelf sizes with stainless swedged posts (4), below. Stainless steel cart washable casters are
required for cart wash applications. Refer to chart below for recommended caster series.

Swedged Posts

Dimensions
Cat. No. Description (in.) (mm)

33UPS-SW Stem Caster Post 33 875
54UPS-SW Stem Caster Post 54 1370
63UPS-SW Stem Caster Post 63 1600

Stainless Steel Cart-Washable Stem Casters

Stem casters are shipped with donut bumpers.

Approx.
Wheel Diameter Face Load Rating Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (lbs.) (kg) Type Wheel Tread (lbs.) (kg)

5MDGSA 5 127 11/4 32 150 68 Swivel High Modulus 21/2 1.1
5MDBGSA 5 127 11/4 32 150 68 Brake High Modulus Donut 25/8 1.17
5MDRGSA 5 127 11/4 32 150 68 Rigid High Modulus Donut 23/8 1.08
5MPGSA 5 127 11/4 32 300 135 Swivel Polyurethane 21/8 .94
5MPBGSA 5 127 11/4 32 300 135 Brake Polyurethane 21/4 1
5MPRGSA 5 127 11/4 32 300 135 Rigid Polyurethane 2 .9

Note 1: Load Height for all 5MD and 5MP casters — 63/32" ± 1/16" (155 ± 1.5mm).
Note 2: All casters are grease sealed with zerk fittings in swivel and axle.
Note 3: Brakes are foot-operated.

5MDGSA

D. For Autoclave (Mobile) Applications

Combine required shelf sizes (page 6) with stainless swedged posts (4), above. Aluminum split sleeves (Cat. No. 9986S)
must be used for autoclave applications. High temperature stem casters must be selected from chart below.

Aluminum Split Sleeves

Improved design is easier to install. For high
temperature, over the road, or conductive
applications. Stainless steel retainer rings
included. One bag required per shelf;
4 pairs per bag.

Cat. No.

9986S Aluminum Split Sleeves with Stainless Rings

High-temperature Autoclave Stem Casters

Cat. No. Type Wheel Tread Load Rating

5MHTP Swivel Hi-temp Phenolic 300
5MHTPB Brake Hi-temp Phenolic 300
5MHTN Swivel Hi-temp Nylon 300
5MHTNB Brake Hi-temp Nylon 300

Note: Casters are temperature rated for up to 300°F (149°C).

9986S

5MHTP & 5MHTPB

5MHTN & 5MHTNB

7

Job ______________________________________

52.03

D. For Autoclave (Mobile) Applications (cont’d.)

Autoclavable Cage Racks

• Preconfigured, autoclavable cage racks available in two footprints —
18x60 (457x1524mm) and 24x60 (610x1524mm).

• Units are 69" (1753mm) high, including casters. Casters must be

ordered separately.

• Carts come standard with swedged posts and aluminum split sleeves.

Approx.
Width/Length/Height Pkd. Wt.
Cat. No. (in.) (mm) (lbs.) (kg) Description

LC5S1860 18x60x69 457x1524x1753 136 61.7 5-shelf, 18" (457mm) wide cage rack
LC5S2460 24x60x69 610x1524x1753 166 75.3 5-shelf, 24" (610mm) wide cage rack

Note: To build a cage rack according to specific requirements, follow instructions (D) on page 7. Refer to Autoclave guidelines,

Autoclave Cart Covers

Approx.
Width/Length/Height Pkd. Wt.
Cat. No. (in.) (mm) (lbs.) (kg) Description

LC1860AC 20x62x61.5 508x1575x1562 6.0 2.7
18" (457mm) wide Cage Rack

LC2460AC 26x62x61.5 660x1575x1562 7.0 3.2

Note: Autoclave cart covers are rated for approximately 70 cycles per cover.

Autoclavable Lab Carts

• Preconfigured, autoclavable Lab carts are available in two footprints —
18x24 (457x610mm) and 24x36 (610x914mm).

• Chose between 2- and 3-shelf models

• Units are 39" (991mm) high, including casters. Caster must be

ordered separately.

• Carts come standard with swedged posts and aluminum split sleeves.

Approx.
Width/Length/Height Pkd. Wt.
Cat. No. (in.) (mm) (lbs.) (kg) Description

LC2S1824 18x24x39 457x610x991 25.0 11.3 2-shelf, 18" (457mm) wide Lab cart
LC3S1824 18x24x39 457x610x991 37.5 17.0 3-shelf, 18" (457mm) wide Lab cart
LC2S2436 24x36x39 610x914x991 46.5 21.1 2-shelf, 24" (610mm) wide Lab cart
LC3S2436 24x36x39 610x914x991 65.5 29.7 3-shelf, 24" (610mm) wide Lab cart

Note: To build a lab cart according to specific requirements, follow instructions (D) on page 7. Refer to Autoclave guidelines,
below, for important checklist to follow.

Autoclave Cart Covers

Approx.
Width/Length/Height Pkd. Wt.
Cat. No. (in.) (mm) (lbs.) (kg) Description

LC1824AC 20x26x33.5 508x660x851 3.0 1.4

18" (457mm) wide Cage Rack

LC2436AC 26x38x33.5 660x965x851 3.5 1.6
24" (610mm) wide Cage Rack

Note: Autoclave cart covers are rated for approximately 70 cycles per cover.

below, for important checklist to follow

L a b s o L u t i o n s

Autoclavable cart cover for

Autoclavable cart cover for

24" (610mm) wide Cage Rack

Autoclavable cart cover for

Autoclavable cart cover for

LC5S2460
(casters ordered separately)

LC5S2460 with
autoclave cart cover
(casters ordered separately)

LC2S1824
(casters ordered separately)

Laboratory soLutions — stainLess

AUTOCLAVE APPLICATION GUIDELINES

When stainless solid shelving, as part of a mobile shelving unit, is used in an autoclave, the following Metro product guidelines are recommended to
ensure optimal product performance and longevity:
Stainless, swedged posts with aluminum post caps must be utilized [part numbers 33/54/63UPS-SW]
Aluminum split sleeves [part number 9986S] with stainless rings should be used to mount solid stainless shelves.
Select either hi-temp phenolic casters or hi-temp nylon casters for application. These casters are designed specifically for autoclave environments.
Bumpers should not be used as they are not designed to withstand autoclave temperature ranges

All Metro Catalog Sheets are available on our Web Site: www.metro.com

InterMetro Industries Corporation

North Washington Street, Wilkes-Barre, PA 18705
Phone: [phone] • Fax: [phone]

For Product Information Call: 1-800-433-2232

Information and specifications are subject to change

without notice. Please confirm at time of order.

Copyright © 2006 InterMetro Industries Corp.

Printed in U.S.A. Rev. 1/07

L03-259