Metro LEC9800 Installation Manual

Adjustable Sharps Container Bracket

INSTALLATION

INSTRUCTIONS

PART No. LEC9800

Assembly consists of (1) SHARPS Container Mounting Bracket, (2) Velcro Straps with

D Ring

1. For carts equipped with an Overbridge: Assemble the universal mounting bracket to the

overbridge with the instructions provided. Mount the Utility Pole to the bracket as shown in
Fig. 1.

2. For carts equipped with an I.V. Pole: Install the I.V. Pole with the instructions provided

3. For all units: Slide the bottom loop of the Sharps Container Bracket Loops over the flattened

area on the Utility or I.V. Pole, and then slide the bracket down as shown in Fig. 2. Do the same
with the top loop. (Bracket will rest on the universal mounting bracket for units with
overbridge (Fig. 3), or on the I.V. Pole adjustment knob for units with I.V. Pole Assembly (Fig.

4).

4. Install the (2) Velcro Straps to the Sharps Container Bracket as shown in Figs. 3 & 4. Install the

Sharps Container and adjust the Velcro straps as required.

Overbridge

Universal
Mounting
Bracket

Fig. 1

Velcro
Straps

Fig. 2

I.V.
Pole

Utility Pole

Fig. 4

Fig. 3

Part No. INST-LEC9800

11/03