Page 1
Item # ______________________________________________
Item # ______________________________________________
Job ________________________________________________
Job ________________________________________________
WIRE SHELVING ACCESSORIES
Decorator Shelf Inlays
Hardboard mats prevent small items from falling through wire shelves. Fit between
posts and level with top of shelf edge. Single packed.
Material — 1/8" (3.2mm) thick cardboard with textured vinyl laminate on each side.
Cleaning instructions — May be wiped with damp cloth. Cannot be immersed in liquid.
Width/Length
Model No. (in.) (mm) Description
1436BWI 14x36 355x914 Reversible, Black and White
1448BWI 14x48 355x1219 Reversible, Black and White
1824BWI 18x24 457x610 Reversible, Black and White
1836BWI 18x36 457x914 Reversible, Black and White
1848BWI 18x48 457x1219 Reversible, Black and White
2424BWI 24x24 610x610 Reversible, Black and White
2436BWI 24x36 610x914 Reversible, Black and White
2448BWI 24x48 610x1219 Reversible, Black and White
Note: Inlays interfere with the attachment of ledges and dividers. The user may modify the inlay to accommodate
these accessories.
Wire Shelving Accessories
Decorator Shelf Inlays
Clear Shelf Inlays
Nearly invisible solid plastic mat retains the open-wire look of shelves and allows light
penetration. Sold in packages of 4.
Material — 0.02" (0.5mm) thick PETG
Width/Length
Model No. (in.) (mm)
1436CI-4 14x36 355x914
1448CI-4 14x48 355x1219
1460CI-4 14x60 355x1524
1836CI-4 18x36 457x914
1848CI-4 18x48 457x1219
1860CI-4 18x60 457x1524
2136Cl-4 21x36 530x914
2148CI-4 21x48 530x1219
2160CI-4 21x60 530x1524
2436CI-4 24x36 610x914
2448CI-4 24x48 610x1219
2460CI-4 24x60 610x1524
Triangle Shelves
Put unused corner space to work while keeping traffic aisles clear.
• Shelf sizes correspond to width (depth) of Super Erecta Shelving for
add-on capability.
• Shelves attach to standard Super Erecta or qwikSLOT posts.
• Weight capacity — 100 lb. (45.4kg)
Size Approx.
Model No. Model No. Width Pkd. Wt.
Chrome Black (in.) (mm) (lbs.) (kg)
H18TRC H18TRB 18 457 151/2 7
H24TRC H24TRB 24 610 211/2 10
Not intended for mobile applications.
Maximum allowable usage height for free-standing unit is 54" (1370mm).
Clear Shelf Inlays
Triangle Shelf
10.06
9.01
Page 2
WIRE SHELVING ACCESSORIES
Aluminum Split Sleeves
Improved design is easier to install. For high temperature, over
the road, or conductive applications. Zinc or stainless steel
retainer rings available to secure shelf. One bag required per
shelf; 4 pairs per bag.
Model No. Description
9986Z Aluminum Split Sleeves with Zinc Rings
9986S Aluminum Split Sleeves with Stainless Rings
Note: Cannot be used with Super Adjustable shelves.
Replacement Plastic Split
Sleeves for Super Erecta Shelves
One bag required per shelf; 4 pairs per bag.
Black. Model No. 9985
White. Model No. 9985W
Note: White post caps and white split sleeves are standard with white designer shelving only.
Replacement Super Adjustable
Super Erecta Corner Releases,
Wedges, and Sleeves
Replacement parts for Super Adjustable and original Super
Adjustable. One bag required per shelf. Each kit includes
(4) corner releases, (4) wedges, and (4) sleeves.
Model No. SAKITA2
Metro Post Boots
Ideal for use with Brite, Chrome, or Metroseal 3 stationary
Super Erecta and Super Adjustable units to protect against
the corrosion in areas where floors are cleaned regularly using
every day cleaning agents. Bag of 4. Model No. 9982GR-4
Length: 5" (127mm)
Material and Description
• Dark gray soft PVC with built-in Microban® antimicrobial product
protection.
• Designed to t Super Erecta stationary posts.
• Pre-drilled hole in base is designed to securely t the threaded leveling
bolt or foot plate bolt.
• Allows the lowest shelf to be positioned at least 6" (152mm) from the
floor per NSF guidelines.
• Not designed to work with stem caster mobile posts.
™
High Temperature Usage
Aluminum split sleeves — high temperature usage
(Stationary Unit)
• A chrome plated Super Erecta wire shelving unit
can be used to a maximum of 250°F (121°C).
• A stainless steel Super Erecta wire
shelving unit can be used to 500°F (260°C).
For mobile units, please factor the usage
requirements of the caster.
Security Shelf
Connector Kit
Kit includes (2) “S” hooks,
(2) screws, and (2) bolts.
Used for added security
to “add-on” shelving units.
One connector kit required
for each connection.
Chrome.
Model No. H9995C
Black.
Model No. H9995B
Proper Usage Environments
• General food preparation/storage areas:
Kitchens, Walk-In Coolers, Dry Storage,
Grocery Back-of-House.
• Controlled environments where Metroseal 3
shelving is appropriate.
• Hospitals: Areas that are mopped frequently;
Areas that may be near a loading dock and
exposed to harsh conditions.
• Not intended for environments that are cleaned
with harsh detergents (I.e. phosphoric acid,
sodium hydroxide based). and/or exposed to
strong decontaminating/sterilizing solutions,
(i.e. phenol based).
“S ” Hooks
Use to eliminate two posts per adjacent unit. Sold individually.
Two are required per shelf. Model No. 9995Z
Notes:
• May only be used in stationary applications.
• Must use a minimum of (2) posts per adjacent add-on unit.
• Weight capacities of adjacent shelving units connected by “S” hooks – standard weight
capacities of shelves and stationary units apply. For the most common configurations involving
54" (1370mm) or taller posts and 4-tiers of shelving, weight capacities are as follows: starter
unit with (4) posts = 2,000 lbs. (907kg) evenly distributed; add-on unit with (2) posts and (2) “S”
hooks per level = 2,000 lbs. (907kg) evenly distributed.
• The distance between two adjacent shelving units — collar to collar — connected by “S” hooks
is 1/16" (1.6mm).
Combination
Right Angles
Starter
“S” Hook
Location
Starter
Add-On
Add-On
End-to-End
Weight Capacities
• Starter Unit with (4) posts
can hold up to 2,000 lb.
(907kg) evenly distributed.
Add-On
Add-On Starter
• Add-On Unit with (2) posts
and (2) “S” hooks per shelf
level can hold up to 2,000 lb.
(907kg) evenly distributed.
Page 3
WIRE SHELVING ACCESSORIES
Post Clamps
Joins units together for maximum strength.
Zinc-plated. Model No. 9994Z
Black. Model No. 9994BL
Notes:
A post clamp adds 5/32" (4mm) between the base of the collars on adjacent units.
The distance between the snake frames on the adjacent units is 7/32" (6mm).
Enclosure panels CANNOT be attached on the ends where post clamps join adjacent units.
Hole Plugs (for Shelves)
This chrome-plated cover is used to fill shelf-corner openings.
Use whenever posts have been eliminated by “S” hooks.
Model No. 9997C
Foot Plates
Use to bolt units to the floor, or when a broader, more stable
foot is desired. Replaces standard post leveling bolt.
Zinc. Model No. 9993Z
Stainless Steel. Model No. 9993S
Black. Model No. 9993BL
Glides
Smooth polymer cover fits over leveling bolt to protect floors.
Material — HDPE
Model No. 9991P
Decorative Leveling Foot
Decorative alternative for post. Compensates for
uneven surfaces.
Chrome. Model No. HDFC
Black. Model No. HDFB
Decorative Casters
• Black nylon housing with non-marking polymer tread.
• 21/2" (63mm) models have threaded stem and attach to
standard stationary shelving posts. Weight capacity of unit
with (4) HDC3BB casters is 300 lb. (136kg).
• 4" (100mm) casters have a non-threaded stem and attach
to standard mobile (-UP) posts. Weight capacity of a unit is
675 lb. (306kg).
Diameter
Model No. Type (in.) (mm)
HDC3BB Swivel/Brake 21/2 63
HDC5B Swivel 4 100
HDC5BB Swivel/Brake 4 100
HDC5B HDC5BB
Page 4
Job ________________________________________________
Job ________________________________________________
10.06
WIRE SHELVING ACCESSORIES
Keyboard Tray
Attaches to all Metro wire shelves, 36" (914mm) length or longer. Mouse Tray
adapts to left or right of Keyboard Tray. Flip-top compartment provides convenient
storage. Constructed of durable high-impact polystyrene. Assembles easily.
• Hardware included for attachment to Metro wire shelves; template provided for
attachment to solid desk surfaces.
• Keyboard Tray Dimensions: 22" L. (559mm) x 151/2" W. (394mm).
• Dimension with Mouse Tray fully extended: 291/2" L. (749mm) x 151/2" W. (394mm).
Model No. CKS1522BL
Wire Management Device
Keeps wires and cables neatly organized both horizontally and vertically.
Easily snaps over the edge of any Super Erecta wire or qwikSLOT shelf.
Black epoxy finish.
Approx.
Width Length Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)
CWM 2 51 2 51 .5 .25
Power Strip
• Mounts quickly and easily to either a Super Erecta or qwikSLOT post.
• Includes a 15 foot (4572mm) long cord.
• Mounting brackets and hardware included.
• UL/CSA approved.
• 15 Amp Circuit Breaker.
• Illuminated Power Switch. 15A/125VAC.60Hz/1875 W.
• Gray/blue nish.
• 14/3 SJT Molded Power Supply Cord.
Approx.
Width Length Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (lbs.) (kg)
CPS48 11/2 38 48 1219 6 2.72
CD/DVD Rack
Attaches to any Super Erecta or qwikSLOT unit. Black epoxy finish.
Approx.
Length Pkd. Wt.
Model No. (in.) (mm) CD Rack Capacity (lbs.) (kg)
L30CDTB 30 760 40 single/4 double 51/2 2.5
L50CDTB 50 1270 66 single/4 double 9 4
Keyboard Tray
Wire Management Device
Surface Mount Swing Arm
Power Strip
for Flat Monitor
Model No. LTFMA
All Metro Catalog Sheets are available on our Web Site: www.metro.com
Wire Shelving Accessories
For Product Information:
U.S. and Canada: 1.800.433.2232
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741
Fax: 570-825-2852
Latin America: 1.561.333.3824
Europe: +31.76.587.7550
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2009 InterMetro Industries Corp.
Asia/Pacic: +65.6567.8003
Middle East/Africa: +971.4.811.8286
L50CDTB
CD Rom Rack
Printed in U.S.A. Rev. 11/09
L02-009
Loading...