Metro Insulation Armour Plus Hot food Holding Cabinets User Manual
4 SERIES
INSULATION
ARMOUR™ PLUS
HOT FOOD
HOLDING CABINETS
INSTRUCTIONS
FOR USE
THIS MANUAL COVERS CABINETS
WITH ELECTRICAL RATINGS OF:
120V, 1400W
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
Metro Heated Cabinets are for
Hot Food Holding applications only
Commercial & Residential Solutions
TABLE OF CONTENTS
SAFETY INFORMATION ..................................................................................................................................................... 2
SAFETY SYMBOLS ............................................................................................................................................................. 2
IDENTIFY YOUR CABINET ................................................................................................................................................. 2
PRODUCT FEATURES ....................................................................................................................................................... 3
INSTALLATION AND SETUP .............................................................................................................................................. 4
REVERSING THE DOOR .................................................................................................................................................... 6
OPERATING INSTRUCTIONS ............................................................................................................................................ 8
CARE AND MAINTENANCE ............................................................................................................................................... 8
BASIC TROUBLESHOOTING ............................................................................................................................................. 9
SERVICE AND REPLACEMENT PARTS ............................................................................................................................. 10
SERVICE AND REPLACEMENT PARTS (CIRCUITS) ......................................................................................................... 13
WARRANTY ........................................................................................................................................................................ 14
SAFETY INFORMATION
WARNING: This cabinet is only for hot food holding applications.
WARNING: Follow all food safety guidelines. Pre-heat the cabinet to the desired temperature before placing hot cooked
food into the cabinet. Food must be at the appropriate temperature before being placed into cabinet. Use a
food probe to check internal food temperature - the cabinet temperature is not necessarily the internal food
temperature.
WARNING: Only factory approved service agents should attempt to service, repair or replace electrical components,
wiring or power cord.
WARNING: Unplug the cabinet before cleaning or servicing. Do not wash the cabinet with a water jet or high pressure
water, do not hose wash/spray interior.
WARNING: Food Service Equipment must be electrically grounded. Failure to ground Food Service Equipment may
result in serious injury or death from electrical malfunction.
CAUTION: Do not spray or pour water into the top of the cabinet (control enclosure). Unplug the cabinet before
cleaning and then wipe with a damp cloth and dry with a towel. Use only cleaning agents approved for
stainless steel.
SAFETY SYMBOLS
!
HAZARDOUS
VOLTAGE !
Disconnect power
before servicing or
cleaning.
IDENTIFYING YOUR CABINET
For future reference, note the serial and model number found on the data plate of the cabinet here:
Serial number ________________________________
Date the cabinet was put into service _______________________________
Fill out and return the warranty card located at the back of this manual.
2
PART NUMBERING
CABINET NAME
CABINET SERIES
CABINET HEIGHT
9 = TALL
CONTROL
ANALOG
PRODUCT FEATURES
Power Cord
C5
__
4 9
_
Heating
Module
-
_
Thermostat
A
_
S
FS
_
_
Thermometer
-
U
_
MATERIAL
S = STAINLESS STEEL
Control Panel
SLIDES
U = UNIVERSAL
L = LIP LOAD
DOOR STYLE
FS = FULL SOLID
ON/OFF
Armour Panel
(Left-Right-Back)
Switch
INSULATION ARMOUR Plus
170
160
180
150
140
190
70
80
60
200
90
120
50
100
210
100
30
80
105
10
220
C
60
F
InterMetro Industries Corp.
s
e
i
r
e
S
4
TM
METRO.COM
Universal
Slide
Door
Door
Handle
(2) Swivel Casters
(2) Brake Casters
Air Chimney
3
Upright
INSTALLATION AND SETUP
1. Check the packaging and cabinet for shipping damage after unloading the unit, and after removing all the
packaging.
2. The receiver of this product is responsible for filing freight damage claims. This equipment must be opened
immediately for inspection. All visible damage must be reported to the freight company within 48 hours and must be
noted on freight bill at the time of delivery.
3. Concealed damage is your responsibility — you must advise the carrier of any loss or damage within 15 days after
receipt of the cabinet. If there is damage, retain the original packaging for inspectors.
4. Any protective covers (plastic or paper sheet) on the sheet metal, if applicable, must also be removed before turning
the cabinet on.
5. To change the position of the power cord, first make sure the cabinet power switch is off and the power cord is
unplugged from any electrical outlet. Remove the screws holding the cabinet top in place. Remove the screws on
the rear of the cabinet that hold the cord bracket in place. Rotate the power cord bracket 90° to the desired position
and reattach it with the screws to the back of the cabinet. Make sure the green ground wire connection and the
wire nuts on the black and white wires have not loosened. Do not alter the wiring of the power cord to the cabinet.
Replace the cabinet top and the screws holding it in place.
6. Refer to the data plate located near the power cord for the electrical specifications of the cabinet as shown on Page 2.
With the POWER switch OFF, plug the cord into the appropriate rated, grounded receptacle.
Cabinets rated at 120V 1400W must be plugged into 15 amp 125 VAC receptacle.
Cord Out
of the Top
Cord Out
of the Back
POWER CORD LOCATION ON CABINET
FIGURE 1:
FIGURE 2:
WALL RECEPTACLES
WARNING: Do not allow combustible materials to be stored or accumulate on, under or next to the cabinet. Do not
block any ventilation louvers or slots.
CAUTION: Allow 18" (46cm) between the Armour panels and any cooking equipment. Do not allow hot kitchen
equipment whose surfaces exceed 200°F (90°C) to touch the panels.
SLIDE INSTALLATION
The universal rack
uprights or lip load
slides have been
installed at the factory.
If removed for cleaning,
reinstall by hanging
them on the rack
hangers on the side
walls of the cabinet.
4
Slide Position to Maximize Universal Slide Pan Capacity when Slides are Spaced
on 3" Centers.
30
31
COMPLETE SET OF
UNIVERSAL SLIDES AND
UPRIGHTS FOR FULL
HEIGHT CABINET
Part No. RPC54-9-URACK
17 Levels
Slides sold in pairs. For additional pair of wire slides, order C5-USLIDEPR-C for Chrome or C5-USLIDEPR-S for Stainless
Steel. To order individual universal uprights only, see item # 31:
FIXED LIP LOAD SLIDE CONFIGURATIONS
LS
29
LS
LS
LS
LS
LS
COMPLETE SET OF LIP
LOAD SLIDES FOR FULL
LS
HEIGHT CABINET
Part No. RPC54-9-LRACK
LS
NOTE: Fixed lip load slides have two slots on the uprights and use lower slot (LS) to install on the rack hanger.
5
Loading...