Page 1
Valet Delivery Cart
ASSEMBLY
INSTRUCTIONS
Model Number HVDC2448
List of Components
Item Qty. Description
63UP 4 Post
5M 2 Caster
5MB 2 Caster with Brake
PIC-CTN1 1 2-Posts with Foot Plates
2448NC 2 24x48 Shelf
2424NC 3 24x24 Shelf
T24C 1 Coat Hanger Tube
24NC 2 Coat Hanger Brackets
R61NC 12 Rods with Tabs
DD24C 4 Dividers
9985 5 Bag of Split Sleeves
InterMetro Industries Corporation
®
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
1
ASSEMBLY
INSTRUCTIONS
For Valet Delivery Cart
Page 2
Valet Delivery Cart
2
4
Seat the remaining shelves
(See Fig. 6). NOTE: Count fifteen
grooves to equally space the
shelves.
6
3
Being certain that the cut down posts
are standing vertically, slip the
special foot plates under the leveling
leg. Unscrew the leveling bolts until
they contact the foot plates.
(See Fig. 5).
7
Count up fourteen grooves from the
bottom shelf and place a pair of split
sleeves on only two posts on the
same end of the cart.
Take the cut down posts and count
up twelve grooves from the bottom
and place a pair of split sleeves on
each post.
Take one of the small shelves and
lower it over the tops of the four
posts, with sleeves in place. Fit the
shelf onto the previously installed
split sleeves and seat the shelf
(See Fig. 4).
InterMetro Industries Corporation
®
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
5
With the top shelf in place, attach the
hanger tube.
L01-342
Information and specifications are subject to change
without notice. Please confirm at time of order.
6/99
Loading...