L A B S O L U T I O N S
Item # ___________________________________
Metro® LAB SOLUTIONS
Metro’s new line of laboratory solutions address a wide range
of laboratory requirements while providing a superior level
of corrosion resistance. Built from advanced polymers that
include *Microban® antimicrobial product protection, Metro’s
innovative MetroMax i™ and Deep Ledge designs provide
the ideal product platform. Available product solutions are
modular by design and offer the customer ultimate flexibility
by permitting the end user to select the most appropriate
caster based on their budget and/or application requirements.
Metro’s Polymer Laboratory Solutions include:
• Lab Worktables and Accessories
• Antimicrobial Casters
• Glassware Handling Solutions
• High Performance Liquid Chromatography Solutions
• General Lab Cart
• Chemical Transport Cart
• Mobile Desk
• Deep Ledge Lab Carts
• Deep Ledge Lab Dolly
Both MetroMax i™ and Deep Ledge shelves have built-in
Microban® antimicrobial product protection. Microban protects
the posts and shelves from bacteria, mold, mildew and fungi
that cause odors, stains and product degradation.
• Corrosion Resistant: MetroMax i™ shelves and posts are
designed to withstand rust and corrosion over the life of the
product, so they are perfectly suited for damp and humid
conditions. MetroMax i™ shelves and posts come with a
lifetime warranty against rust and corrosion.
• Cleans Easily: Solid MetroMax i™ and Deep Ledge shelves
contain spills and wipe down easily. Shelf frame and posts
are smooth and rounded with no sharp edges so they wipe
down easily.
• Strong and Durable: Reinforced polymers give MetroMax i™
incredible strength — up to 800 lbs. (364kg) per shelf. Deep
Ledge shelf load rating depends on application.
Job _____________________________________
MetroMax i™
Lab Worktable
(Shown with
accessories,
casters and
Starsys Cart)
MetroMax i™
4 Basket
Glassware Cart
(Shown with
casters and
accessories)
Deep Ledge
Lab Dolly
(Shown with
stainless casters)
LABORATORY SOLUTIONS — JUST Add cASTeRS
*MICROBAN is a registered trademark of Microban Products Company.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
52.01
9.01
L A B S O L U T I O N S
L A B S O L U T I O N S
Specifications
MetroMax i™:
Longitudinal Beams and Posts: Pultrusions — continuous
glass fibers and thermoset resin composite with built-in
Microban antimicrobial product protection.
Mats, Open and Solid: Mineral reinforced polypropylene.
Mats contain Microban® antimicrobial product protection.
Ledges, Dividers, and Wedge: Glass reinforced
polypropylene.
Post Cap and Center Beam Cap: High-density polyethylene.
MetroMax i™ is applicable in cooler conditions down to -20°F
(-29°C).
MetroMax i™ Lab Worktables
• Advanced polymer construction provides excellent corrosion-resistance performance
for the most corrosive lab environments.
• Table features smooth surfaces that are easy-to-clean. Mobile units can be easily
moved to clean behind table area.
• Available top materials include Type 304 stainless and TRESPA phenolic
resin (black or gray). Refer to chart below for more information.
• Choose from a wide range of available accessories and caster options
(page 3) to customize table for a specific application.
Countertop Application Matrix
Epoxy Phenolic Stainless Epoxy Phenolic Stainless
Use Area Resin Resin Steel Characteristics Resin Resin Steel
Heat Resistance Excellent Fair* Excellent
Low chemical use Abrasion Resistance Good Excellent Good
Moderate chemical use X X Impact Resistance Good Excellent Good
High chemical use X X Strength Good Excellent Good
Stain Resistance Good Good Good
*Discolors with high heat
Note: Phenolic resin and stainless are offered as top options for this table system. Epoxy resin information is shown for comparison
only.
Definitions:
Phenolic resin: Compression molded of organic fiber-reinforced phenolic core with an
integrally cured thermoset resin surface. Stronger than Epoxy resin over a span, and
not as brittle.
Stainless Steel: Worksurfaces are fabricated from Type 304 stainless steel which
provides excellent protection in corrosive environments.
Epoxy resin: Epoxy resins, silica, organic fillers, and inert hardeners are cast in forms
and cured to a uniform mixture throughout.
Select Table Style from Chart Below and Following Page:
Worktables with Stainless Backsplash, Top and Solid MetroMax i™ Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XS3 LTM30XS3 30 762 293/4 749 351/2 902 391/2 1003 65 29
LT36XS3 LTM36XS3 30 762 353/4 908 351/2 902 391/2 1003 70 32
LT48XS3 LTM48XS3 30 762 473/4 1213 351/2 902 391/2 1003 90 41
LT60XS3 LTM60XS3 30 762 593/4 1517 351/2 902 391/2 1003 100 45
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed.
Worktables with Stainless Backsplash, Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XUS3 LTM30XUS3 30 762 293/4 749 351/2 902 391/2 1003 70 32
LT36XUS3 LTM36XUS3 30 762 353/4 908 351/2 902 391/2 1003 75 34
LT48XUS3 LTM48XUS3 30 762 473/4 1213 351/2 902 391/2 1003 95 43
LT60XUS3 LTM60XUS3 30 762 593/4 1517 351/2 902 391/2 1003 110 50
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
2
evenly distributed.
Countertop (Lab Worktables):
Stainless Steel Top: 16 gauge (.060) thk, Type 304 Stainless
Steel, #3 Polish with vinyl protection. Bull nose front edge and
4” (102mm) high brake-formed backsplash.
Phenolic Top: TRESPA Top Lab Plus (black or gray)
phenolic resin.
Phenolic Backsplash: TRESPA Athlon (black or gray)
phenolic resin.
LTM60XUPG3
(Shown with accessories,
casters and Starsys Cart)
LTM30XS3
(Shown with
casters)
LTM30XUS3
(Shown with
accessory
wire shelf
and casters)
L A B S O L U T I O N S
MetroMax i™ Lab Worktables (cont’d)
Select Table Style from Chart Below:
Worktables with Black Phenolic Top and Solid MetroMax i™ Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XPB3 LTM30XPB3 30 762 293/4 749 361/2 927 401/2 1016 85 38
LT36XPB3 LTM36XPB3 30 762 353/4 908 361/2 927 401/2 1016 91 41
LT48XPB3 LTM48XPB3 30 762 473/4 1213 361/2 927 401/2 1016 118 53
LT60XPB3 LTM60XPB3 30 762 593/4 1517 361/2 927 401/2 1016 138 62
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed.
Worktables with Black Phenolic Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XUPB3 LTM30XUPB3 30 762 293/4 749 361/2 927 401/2 1016 90 41
LT36XUPB3 LTM36XUPB3 30 762 353/4 908 361/2 927 401/2 1016 97 44
LT48XUPB3 LTM48XUPB3 30 762 473/4 1213 361/2 927 401/2 1016 125 56
LT60XUPB3 LTM60XUPB3 30 762 593/4 1517 361/2 927 401/2 1016 145 66
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
Worktables with Gray Phenolic Top and Solid MetroMaxi™ Shelf
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LT30XPG3 LTM30XPG3 30 762 293/4 749 361/2 927 401/2 1016 85 38
LT36XPG3 LTM36XPG3 30 762 353/4 908 361/2 927 401/2 1016 91 41
LT48XPG3 LTM48XPG3 30 762 473/4 1213 361/2 927 401/2 1016 118 53
LT60XPG3 LTM60XPG3 30 762 593/4 1517 361/2 927 401/2 1016 138 62
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
LTM48XPB3
(Shown with backsplash
accessory and casters)
LTM60XUPB3
(Shown with
accessories and casters)
Worktables with Gray Phenolic Top and 3-Sided Frame
Work Surface Overall Approx.
Cat. No. Cat. No. Width Length Height Height Pkd. Wt.
Stationary Mobile* (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
LTM48XPG3
(Shown with backsplash
accessories and casters)
LT30XUPG3 LTM30XUPG3 30 762 293/4 749 361/2 927 401/2 1016 90 41
LT36XUPG3 LTM36XUPG3 30 762 353/4 908 361/2 927 401/2 1016 97 44
LT48XUPG3 LTM48XUPG3 30 762 473/4 1213 361/2 927 401/2 1016 125 56
LT60XUPG3 LTM60XUPG3 30 762 593/4 1517 361/2 927 401/2 1016 145 66
*Casters ordered separately. Refer to Caster Selection Guide (page 3) for caster options.
Note: Lab Worktables are load rated at 50 lbs. (23kg) per square foot up to a maximum of 600 lbs. (273kg), assuming load
evenly distributed. Worktables with Black Phenolic Top and 3-Sided Frame
For Mobile Lab Tables, Select Appropriate Casters from Chart Below.
(Four brake casters are recommended for maximum table stability)
LTM60XUPG3
(Shown with
accessories and casters)
Caster Selection Guide
Load Rating Corrosion Cart Antimicrobial
*Caster Series Wheel Material Rollability Floor Protection Noise (lbs.) (kg) Resistance Washable Additive in Wheel
5MDXA/5MDBXA (brake) High Modulus Rubber Good Good Low 250 114 Low No No
5MPX/5MPBX (brake) Polyurethane Good Good Moderate 300 137 Low No No
5PCX/5PCBX (brake) Polyurethane Good Good Moderate 300 137 High No No
5PCXM/5PCBXM (brake) Polyurethane Good Good Moderate 300 137 High No Yes
5MPXGSA/5MPXGSA (brake) Polyurethane Good Good Moderate 300 137 High Yes No
*Casters listed are for use with MetroMax i™ product solutions. For Super Erecta post applications, including Deep Ledge Lab Cart and Lab Dolly applications, use part number listed above
minus “X” designation.
NOTE: The total weight of the equipment and its load should not exceed three times the load rating per caster.
Additional stem casters, in various sizes and wheel materials, are available. Contact your Metro rep for more information.
See page 4 for caster photos.
3
L A B S O L U T I O N S
L A B S O L U T I O N S
See page 3 for Caster Selection Guide.
5MDXA
5PCBX
5MPX
5PCBXM
Additional MetroMax i™ Accessory Options
Handle
Ledges
Choose from Available Accessories
to Customize Table.
Backsplash
4" (102mm) high.
Attaches to phenolic
table top (page 3),
using pre-drilled
holes. Match length
and color with selected countertop.
Approx.
Cat. No. Cat. No. Length Pkd. Wt.
Black Gray (in.) (mm) (lbs.) (kg)
LT30BSB LT30BSG 273/4 705 5.5 2.5
LT36BSB LT36BSG 333/4 875 6.5 2.9
LT48BSB LT48BSG 453/4 1162 7.5 3.4
LT60BSB LT60BSG 573/4 1466 9.5 4.3
Keyboard Tray
Cat. No. LTKB
Drawers
Cat. No. LTD3
3" (76mm)
Cat. No. LTD6
6" (152mm)
Cat. No. LTD3L
3" (76mm) locking
Cat. No. LTD6L — 6" (152mm) locking
L30BSG
Dividers
Color Shelf Markers
For more information on
those and other MetroMax i™
accessories, contact your
Metro representative.
4
Label Holders
Metro Totes
Wire Shelf
Stainless or
Epoxy-coated
shelves
available.
Approx.
Cat. No. Cat. No. Length Pkd. Wt.
Stainless Epoxy Coated (in.) (mm) (lbs.) (kg)
LT30WS LT30WE 223/8 568 6 2.7
LT36WS LT36WE 283/8 720 7.5 3.4
LT48WS LT48WE 403/8 1025 10 4.5
LT60WS LT60WE 523/8 1330 12 5.4
Note: Shelves are load rated for a maximum of 150 lbs. (68kg).
Surface Mount Swing Arm
for Flat Monitor
Cat. No. LTFMA
L A B S O L U T I O N S
MetroMax i™ Glassware Carts
• Two-basket and four-basket capacity glassware solutions are offered in a spacesaving 18" x 36" (457 x 914mm) footprint.
• Solid MetroMax i™ bottom shelf provides spill retention
and can be removed from shelf frame for easy cleaning.
• Glassware carts are built, primarily, from MetroMax i™ advanced polymers,
providing lifetime corrosion protection.
• Choose from a wide range of accessories, including all-polymer casters, for
maximum corrosion resistance and premium performance.
Refer to Caster Selection Guide (page 3) for choice of casters. Units listed below
do not include casters. Metro’s 5PC series (two brake, two swivel) casters are
recommended for superior lifetime performance.
Width Length Height Approx. Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Description (lbs.) (kg)
GWBX3-1 18 457 36 914 40 1016 2-Basket Unit 38 17
GWBX3-2 18 457 36 914 60 1524 4-Basket Unit 83 37
GWTX3-1 18 457 36 914 40 1016 2-Tote Kit Unit 36 16.3
GWTX3-2 18 457 36 914 60 1524 4-Tote Kit Unit 101 46
Accessories
Width Length Height Approx. Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Description (lbs.) (kg)
GWCVC41 18 457 36 914 32 889 Clear Cart Cover — Short Unit 2.5 1.1
GWCVC62 18 457 36 914 52 1320 Clear Cart Cover — Tall Unit 3.5 1.6
GWSVC41 18 457 36 914 32 889 Blue Cart Cover — Short Unit 2.5 1.1
GWSVC62 18 457 36 914 52 1320 Blue Cart Cover — Tall Unit 3.5 1.6
*GWOLYKIT Tote Glassware Transport Kit 38.0 17.0
GWBSKT36 18 457 351/2 901 7 178 Vinyl-Coated Baskets (2) 8.0 3.6
*Each Metro tote kit includes TB93060NAT (1), TB92060NAT (1), DL93060NAT (3), DS93060NAT (3), DS92060NAT (3), and DL92060NAT (3).
(Shown with Metro Tote Kit
on bottom shelf and casters)
GWBX3-1
GWBX3-1
(with blue cart cover
and casters)
GWBX3-1
(with clear cart cover
and casters)
GWBSKT36
GWTX3-1
(shown with casters)
Red shelf markers
can be used to
designate unclean
glassware
Blue shelf markers
can be used to
designate clean
glassware
MetroMax i™
Glassware Cart
By combining
standard MetroMax i™
components,
including MetroMax i™
baskets, a custom
glassware cart can be
created. Contact your
Metro representative
for more information.
5
L A B S O L U T I O N S
L A B S O L U T I O N S
High Performance Liquid Chromatography (HPLC) Carts
• HPLC carts contribute to greater benchtop productivity.
• Mobilize and stack HPLC equipment on carts to maximize valuable lab space.
• Avoid crowding valuable bench top space with High Performance Liquid
Chromatography (HPLC) or other analytical equipment.
HPLC Models (Casters not included*)
Approx.
Width Length Height Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Description (lbs.) (kg)
HPLC3X3 24 610 30 760 81 2288 4-Shelf Unit 70 32
Single Experiment Cart
HPLC4X3 24 610 48 1219 81 2288 4-Shelf Unit 101 46
Double Experiment Cart
*See page 3 for Caster Selection Guide.
Accessories
Approx.
Pkd. Wt.
Cat. No. Description (lbs.) (kg)
FMAX Post-Mount Swing Arm for Flat Monitor 4.5 2.0
TMX Post-Mount Cable/Tube Management Clips (6 clips/bag) 1.0 .45
Original HPLC Models (Includes casters)
Approx.
Width Length Height Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Description (lbs.) (kg)
HPLC1X3 24 610 30 760 81 2288 5-Shelf Unit 89.5 40.6
Single Experiment Cart
HPLC2X3 24 610 48 1219 81 2288 5-Shelf Unit 114.5 51.9
Double Experiment Cart
Note 1: Single HPLC experiment carts feature a 24"x30" (610x760mm), five-shelf unit (4 solid, 1 open-grid shelf),
mounted on 74" (1880mm) mobile posts. Double HPLC experiment carts feature a 24"x48" (610x1219mm),
five-shelf unit (4 solid, 1 open-grid shelf) mounted on a 74" (1880mm) mobile posts.
Note 2: Metro Olympic tote boxes can be used to complete the system, either on the bottom shelf to contain test
beakers or flasks, or in conjunction with an Undershelf Slide to provide a drawer for small tool storage.
FMAX and TMX
Other Accessories
• Slide-out Keyboard Shelf
Epoxy-coated keyboard shelf provides high level of
corrosion resistance. Designed to fit both 18" (457mm) and
24" (610mm) wide MetroMax i™ shelves. Keyboard shelf
loading should not exceed 10 lbs. (45.8kg).
Dimensions: 16"W.x261/2"L.x5"H. (406x673x127mm)
• Flat Monitor Mounting Kit
Unique mounting bracket and cross-bar design permits flat
monitor to be mounted on MetroMax i™ units. Flat monitor
can be mounted between two MetroMax i™ posts, either in
back or front of unit. Mounting bracket loading should not
exceed 30 lbs. (14kg). VESA mounting plates included.
Bracket Dimensions:
37/16"W.x813/16"L.x53/4"H. (87x223x146mm) (Cat. No. FMBX)
Cross-Bar Dimensions:
21/8"W.x30"L.x3"H. (54x762x76mm)
21/8"W.x36"L.x3"H. (54x914x76mm)
21/8"W.x48"L.x3"H. (54x1219x76mm)
Note: For flat monitor mounting on MetroMax i™ order either
Cat. No. FM30X3, FM36X3, or FM48X3 (Cross-bar and
mounting bracket included). For flat monitor mounting on
Mobile Desk order Cat. No. FMBX.
• Power Strip
Six outlet power strip, featuring surge protection, mounts
flush with any MetroMax i™ shelf frame. Power strip is UL
approved. Gray power strip comes with 6 foot (1829mm)
long cord.
Dimensions: 21/4"W.x13"L.x41/4"H. (57x330x108mm)
6
Cat. No. KBX
Cat. Nos. FM30X3/
FM36X3/FM48X3
(Cross Bar and Mounting
Bracket included)
Cat. No. PSX
HPLC3X3
(Shown with
accessories and casters)
Usage Instruction
• When flat monitor mounting kit
is in use, please remove flat
monitor from cross bar before
cart transport.
L A B S O L U T I O N S
MetroMax i™ Lab Carts
Metro’s Lab Cart line includes a General Lab
Cart, Chemical Cart, and Mobile Desk. All
carts are designed to offer superior corrosion
resistance. Smooth rolling, 5" (127mm)
polyurethane casters come standard with
each cart. All shelves adjust in 1" (25mm)
increments, offering precise shelf adjustment
and maximum storage utilization.
• Mobile Desk can
be used for
instrumentation
storage or can be
combined with
accessories to
provide a functional
lab work surface.
• Accessorize desk with
power strip, slide-out
keyboard, and flat
monitor mounting.
• Four, locking 5"
(127mm) polyurethane
casters included for
maximum stability.
Mobile Desk
Cat. No. MDSX3
(Casters included)
General Lab Cart
Cat. No. LABX3
(Casters included)
Chemical Cart
Cat. No. CHEMX3
(Casters included)
• Microban®
antimicrobial
product protection
is built into the high
contact areas of the
product including the
shelf mats, pultruded
beams, and posts.
• Microban® protects the
shelves and posts from
bacteria, mold, mildew
and fungi that cause
odors, stains and
product degradation.
• Cart is ideal for
transporting
equipment and
instruments in and
around lab.
• Two brake casters
provided for extra
stability.
• Solid shelves contain
unwanted spills.
• Stackable perimeter
ledges retain
chemicals, acid
and other solution
containers for safe
transport.
• Solid shelf mats lift
off shelf frame for
easy cleaning.
• 5" (127mm)
polyurethane casters
provide smooth ride.
• Two brake casters
provided for extra
stability.
Dimensions
Cart Approx.
Width Length Height Load Rating Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) Description (lbs.) (kg)
LABX3 18 457 36 914 40 1016 600 273 General Lab Cart 43 19.5
CHEMX3 18 457 36 914 40 1016 600 273 Chemical Cart 49 22.2
MDSX31 18 457 36 914 40 1016 600 273 Mobile Desk 55 24.9
1
Mobile desk features a phenolic work surface offering a high level of corrosion resistance. Mobile desk includes: four polyurethane brake casters, each measuring 5" (127mm), for maximum
stability when foot-operated brakes are engaged.
Note: All carts include 5MPX series casters (2 brake, 2 swivel), unless otherwise noted.
7
Job ______________________________________
52.01
DEEP LEDGE LAB SOLUTIONS with
Metro Deep Ledge Carts with Microban® antimicrobial product
protection are the most advanced general purpose carts in the
marketplace today. The Deep Ledge series has shelves with built-in
Microban® antimicrobial product protection that helps keep shelves
cleaner between cleanings by inhibiting the growth of bacteria,
mold and mildew that cause odors and stains on the shelf surface.
All models listed below come without casters. Refer to Caster
Selection Guide on page 3 to select casters.
Approx.
Width Length Height Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Description (lbs.) (kg)
LDP 211/2 546 323/4 831 41 1041 Lab Dolly with 25 11
Stainless Posts
and Handle
LC2P2030 211/2 546 323/4 831 41 1041 2-Shelf Cart with 29 13
Stainless Posts
and Handle
LC3P2030 211/2 546 323/4 831 41 1041 3-Shelf Cart with 38 17
Stainless Posts
and Handle
Note: Cat. No. LC3P2030 is load rated for a maximum of 200 lbs. (91kg).
L A B S O L U T I O N S
• Safe and Easy to Clean
• Strong and Durable
• Versatile
LC3P2030
(Shown with
stainless casters)
LDP
(Shown with
All Metro Catalog Sheets are available on our Web Site: www.metro.com
LABORATORY SOLUTIONS — JUST Add cASTeRS
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741
Fax: 570-825-2852
stainless casters)
Printed in U.S.A. Rev. 6/09
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2009 InterMetro Industries Corp.
L03-238
For Product Information:
U.S. and Canada: 1.800.433.2232
Latin America: 1.561.333.3824
Europe: +31.76.587.7550
Asia/Pacific: +65.6567.8003
Middle East/Africa: +971.4.811.8286
Loading...