Metro FPS10N User Manual

Item # ______________________________________________

®

®

®

®

C

Item # ______________________________________________

Job ________________________________________________

Job ________________________________________________

TOP-TRACK™ HIGH-DENSITY STORAGE

For MetroMax i™ and MetroMax Q

MetroMax iQ

™

Top-Track

• Maximizes Storage Capacity: Top-Track can increase
the storage capacity of a given area by 30% to 40%.
The system allows more storage units to fit in a defined
space. A movable, open aisle allows full access to each
entire shelving unit thus eliminating hard to reach or
“dead” spaces.

• Easy Access: The overhead track system guides the
mobile units and opens an access aisle between any two
units, whenever it is needed. The track is above the storage
units enabling easy access for employees or for utility carts,
simplifying the material handling task.

• Cost-Saving Performance: This efficient utilization of space
addresses the storage needs of new or growing operations.
In a new facility, less square footage would have to be
dedicated to storage. In growing operations, MetroMax Top­Track can eliminate the need to expand the facility to handle
increasing storage requirements, greatly reducing the costs
associated with a growing business’s needs.

• Uniquely Interchangeable: Mix and match MetroMax i™ and
Q shelves and posts based on the application. Both shelf
options feature removable polymer, open grid shelf mats
for longer-life durability and easy cleaning. Corrosion proof
MetroMax i™ offers a solid shelf option and better chemical
resistance. Corrosion resistant MetroMax Q steel posts can
improve the overall rigidity of the Top-Track system in higher
weight bearing applications.

*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

• Clean Design: Guide tracks are installed overhead enabling
easy cleaning of floors. MetroMax i™ and MetroMax Q
shelves feature removable polymer mats. *Microban
antimicrobial product protection is built into the high contact
areas of the shelving systems — shelf mats, frames, and
posts — to inhibit the growth of bacteria, mold, mildew,
and fungus that cause odors and product degradation.
Microban product protection keeps the shelves and posts
“cleaner between cleanings”.

• Increased Productivity: With reduced square footage
dedicated to storage, MetroMax Top-Track maximizes the
amount of productive “front of the house” space available,
increasing daily revenues.

The system compensates for uneven floor surfaces. Floor
should be smooth and free from large cracks or raised
obstacles. Maximum load capacity for mobile units is 900
lbs. (400kg).

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

™

9.29

METROMAX iQ™ TOP-TRACK

C

E

D D DA B

C

E

D D D A

BA D D D E

C

AD D D E

C

C C

™

SYSTEM COMPONENTS
A = Stationary End Units

B = Stationary Intermediate Unit (Optional)
C = Track Set

D = Mobile Units
E = Open Aisle

Stationary End Unit Kit

(Order one per Top-Track system)

Kit includes the hardware and components needed to connect
track sets to two stationary end units. 86" (2185mm) posts
included. Shelves are ordered separately. Choose from
MetroMax i and MetroMax Q options.

End unit kit carton:

• Hardware: RPHDWE-TTECAP

• Footplates — 9993S (qty. 8)

• Stainless steel track support rails (qty. 4)

• Tri-lobal adapters (2 bags; each bag has 4 adapters)

Posts: 86" (2185mm) stationary posts, qty. 8

Intermediate Unit Kit (Optional)

Required when track length exceeds 21' (6405mm). A
stationary intermediate kit may be used at the discretion of the
end user when track lengths are less than 21' (6405mm). Kit
includes the hardware and components needed to connect
track sets to one stationary intermediate unit. 86" (2185mm)
posts included. Shelves are ordered separately. Choose from
MetroMax i and MetroMax Q options.

Intermediate unit kit carton:

• Hardware: RPHDWE-TTECAP

• Footplates — 9993S (qty. 4)

• Stainless steel intermediate track support rails (qty. 2)

• Tri-lobal adapters (1 bag; bag contains 4 adapters)

Posts: 86" (2185mm) stationary posts, qty. 4

FRONT VIEW

MetroMax i™ MetroMax Q
Fits Shelf Width End Unit Kit End Unit Kit
(in.) (mm) Model No. Model No.

OVERHEAD VIEW

18 457 MXTTE18 MQTTE18
21 530 — MQTTE21
24 610 MXTTE24 MQTTE24

MetroMax i™ end unit kit includes polymer posts (MX86P).
MetroMax Q end unit kit includes epoxy coated steel posts.

Additional Replacement Parts:

Tri-lobal adapters: MTLA (4 per bag)

End Unit track support rail:
RPMMAXTB-18A, RPMMAXTB-21A, RPMMAXTB-24A

MetroMax i™ MetroMax Q
Fits Shelf Width Intermediate Unit Kit Intermediate Unit Kit
(in.) (mm) Model No. Model No.

18 457 MXTTA18 MQTTA18
21 530 — MQTTA21
24 610 MXTTA24 MQTTA24

™

MetroMax i™ end unit kit includes polymer posts (MX86P).
MetroMax Q end unit kit includes epoxy coated steel posts.

Additional Replacement Parts:

Tri-lobal adapters: MTLA (4 per bag)

Intermediate Unit track support rail:
RPMMAXTB-18MA, RPMMAXTB-21MA, RPMMAXTB-24MA

™

Mobile Unit Kit (Order one per mobile unit)

One kit is required per mobile unit. Kit includes posts, rigid
casters, caster channels, bumpers, and roller assemblies.
Shelves are sold separately. Choose from MetroMax i and
MetroMax Q options.

Mobile unit kit carton:

• Rollers: MAXROL, bag of 4

• Casters: 5" polyolefin wheel, plated or stainless horn, axle

• Caster channels: Type 304 stainless, qty. 2

• Bumpers: M9992DBX, qty. 4

Posts: 74" (1890mm) stem caster mobile, qty. 4

Track Sets

Includes necessary sections of track for assembling track runs
of 6' to 21' (1830-6405mm). Only one track set is required
between stationary units.

Replacement Joining Kit:
Model No. HDWE-TTJOIN

Note: TTS2.5NA includes a joining kit to connect

the tracks to longer track sections.

METROMAX i™ MOBILE KIT METROMAX Q™ MOBILE UNIT KIT
Fits

Shelf Width Plated Stainless Plated Stainless

(in.) (mm) Model No. Model No. Model No. Model No.

18 457 MXTTM18C MXTTM18S MQTTM18C MQTTM18S
21 530 MQTTM21C MQTTM21S
24 610 MXTTM24C MXTTM24S MQTTM24C MQTTM24S

Additional Replacement Parts:

Caster: 5MOOR (plated), 5MOORSA (stainless)

Caster channel: 18RS, 21RS, 24RS

Approx. Approx.
Length Pkd. Wt. Length Pkd. Wt.
Model No. (feet) (mm) (lbs.) (kg) Model No. (feet) (mm) (lbs.) (kg)

TTS2.5NA 21/2 762 15 6.8 TTS14NA 14 4267 98 44.1
TTS6NA 6 1828 40.5 18.2 TTS15NA 15 4572 106.5 47.9
TTS7NA 7 2135 47.5 21.3 TTS16NA 16 4877 113.5 51
TTS8NA 8 2440 56 25.2 TTS17NA 17 5182 121 54.4
TTS9NA 9 2743 62.5 28.1 TTS18NA 18 5486 128 51.6
TTS10NA 10 3048 69.5 31.2 TTS19NA 19 5791 135 60.7
TTS11NA 11 3353 76.5 34.4 TTS20NA 20 6096 142 63.9
TTS12NA 12 3657 83.5 37.5 TTS21NA 21 6400 149 67
TTS13NA 13 3962 92 41.4