Metro DunnageShelf User Manual
®
®
Item # ______________________________________________
Job ________________________________________________
SUPER ERECTA SHELF
Dunnage Shelves DR Series
SUPER ERECTA SHELF
®
DUNNAGE SHELVES
DR Series
• Superior Strength: Dunnage shelves offer
considerably more weight-bearing capacity than
other Super Erecta Shelf
combined with them to provide extra strength at the
lower levels of a shelving unit where the heaviest
loads will be placed. The 36" (914mm) length has a
1,600-pound (750kg) uniformly distributed static
load capacity; the 48" (1219mm) shelves hold up to
1,300 pounds (600kg), and the 60" (1525mm)
length holds up to 1,000 pounds (450kg).
• Stress Resistance: The high static-load capacity
of the Super Erecta Shelf® dunnage shelf
translates into an increased ability to stand up
under the strain of unbalanced loads and the
stress of materials repeatedly being placed on the
shelf in a less-than-gentle way.
• Super Erecta Shelf® Construction: These
dunnage shelves have the same tapered corners
and split sleeves that fit the 1" (25mm) posts used
for other Super Erecta Shelf® shelving. As a result,
they assemble easily, fit securely and are
compatible with 60 different Super Erecta Shelf
types and sizes.
• Two-Piece Design: Removable wire deck fits over
reinforced 1" (25mm) square, tubular frame. It lifts
off for easy, thorough cleaning.
• Smooth Loading/Unloading: The front-to-back
upper ribs of the deck allow you to slide items on
and off the shelves smoothly.
• Adjustable: Rolled grooves on the posts enable
dunnage shelves to be positioned or repositioned
at desired levels in 1" (25mm) increments.
• Finishes: Available in chrome-plated, Metroseal 3
or stainless steel.
®
shelves and can be
™
®
®
10.45
InterMetro Industries Corporation
®
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Job ________________________________________________
®
®
SUPER ERECTA SHELF
®
DUNNAGE SHELVES
10.45
DR Series
Specifications
• Shelves: The shelf support frame is made of
1" (25mm) square tubing. The removable wire
deck is formed from
• Posts: Posts have an outside diameter of
1" (25mm) with rolled grooves in 1" (25mm)
increments along entire height. Available in
chrome-plated, Metroseal 3
Dimensions
Shelves
Note: For more information on Metroseal 3, refer to sheet #10.10a.
5
⁄16" (7.9mm) diameter wire.
™
or stainless steel.
Cat. No. Cat. No. Cat. No. Width Length Pkd. Wt.
Chrome Metroseal 3 Stainless (in.) (mm) (in.) (mm) (lbs.) (kg)
1824DRC 1824DRK3 — 18 455 24 610 14 6.4
1830DRC 1830DRK3 — 18 455 30 760 18 8.2
1836DRC 1836DRK3 1836DRS 18 455 36 910 21 9.5
1848DRC 1848DRK3 1848DRS 18 455 48 1220 28 12.7
1860DRC 1860DRK3 1860DRS 18 455 60 1525 34 15.4
2424DRC 2424DRK3 — 24 610 24 610 16 7.3
2430DRC 2430DRK3 — 24 610 30 760 20 9.1
2436DRC 2436DRK3 2436DRS 24 610 36 910 24 10.9
2448DRC 2448DRK3 2448DRS 24 610 48 1220 30 13.0
2460DRC 2460DRK3 2460DRS 24 610 60 1525 37 16.8
Approx.
®
SUPER ERECTA SHELF
Posts
Cat. No. Cat. No. Cat. No. Height* Pkd. Wt.
Chrome Metroseal 3 Stainless (in.) (mm) (lbs.) (kg)
63P 63PK3 63PS 629⁄16 1589 31⁄2 1.6
74P 74PK3 74PS 745⁄8 1895 4 1.8
86P 86PK3 86PS 865⁄8 2200 5 2.3
*Height includes leveling bolt and cap.
Important: Stability decreases as the ratio of height to width increases when heavier loads are placed on upper shelves. Keep units as
Dunnage Shelves DR Series
All Metro Catalog Sheets are available on our Web Site:
Approx.
wide and low as possible, using the dunnage shelf as the bottom shelf. If two dunnage shelves are being used, both should
be placed within the lower half of the unit. Dunnage shelves are not recommended for use in shelf carts or trucks.
www.metro.com
InterMetro Industries Corporation
®
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2003 InterMetro Industries Corp.
Printed in U.S.A. Rev. 2/03
L02-022A
Loading...