Metro DH 2020 User Manual

®

Assembly Instructions For Pan Dolly Handles

DH 2020 DOLLY AND DH 2040 DOLLY

1. Invert the dolly and position on bench or table as
shown in illustration.

2. On nearest two casters remove the inside two
nuts and lockwashers from the 3/4" long bolts
(Do not remove the bolts).

3. Position the handle with the short ends up. Place
two handle clamps, with the flat side of the clamp
facing down and away from the center of the
handle, on each handle end.

4. Guide the bolts through the handle clamps and
replace the lockwashers and nuts. Secure the
nuts tightly.

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
[phone]

Information and specifications are subject to change

without notice. Please confirm at time of order.

L01-047