Page 1
EQUIPMENT FEATURES
Polisher for continuous professional operation
Extreme torque
Ergonomic front flap for optimum machine control
Small and handy like a small angular grinder
Die cast aluminium gear housing
Vario Tacho Constamatic (VTC) electronics allow you to set the
right speed for the application and then maintain that speed,
even under heavy loading
Thumbwheel for preselection of speed
Overload protection
No-volt release switch
Spindle lock
Auto-stop carbon brushes
ANGLE POLISHER
ACCESSORIES FOR THE ANGLE POLISHER
Velcro-faced backing pads
Velcro-faced, for attaching polishing and sanding
accessories
Diameter
mm
73 12 1 6.23286
115 12 1 6.24840
123 12 1 6.23287
147 12 1 6.23288
173 12 1 6.23289
Cling-fit polishing sponges, coarse
Diameter
mm
80 25 1 6.24912
130 25 1 6.24913
130 50 1 6.24914
160 25 1 6.24915
160 50 1 6.24916
200 25 1 6.24917
200 50 1 6.24918
Cling-fit polishing sponges, fine
Thickness
Packing unit Order
mm
For weathered paintwork
Thickness
Packing unit Order
mm
For polishing paintwork
no.
no.
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
PE 12-175
1200 Watt
Electronic Angle Polisher
PE 12-175
Comparative device characteristics
Torque 14 Nm
For backing pad up to max. 175 mm
No load speed 700 - 2.200 /min
Rated input power 1.200 W
Output power 680 W
Rated load speed 2.200 /min
Spindle thread M 14
Weight (without mains cable) 2,4 kg
Type PE 12-175
Order no. 6.02175.00
Standard equipment Hand guard, side handle,
(delivered without
buffing wheel)
Type PE 12-175 Set
Order no. 6.02175.91
Standard equipment Hand guard, side handle,
velcro-faced backing pad,
cling-fit polishing sponge,
cling-fit lambswool
polishing disc
Diameter
mm
Thickness
mm
Packing unit Order
no.
80 20 1 6.24092
130 25 1 6.24967
130 50 1 6.24926
160 25 1 6.24968
160 50 1 6.24927
200 25 1 6.24925
200 50 1 6.24928
Cling-fit polishing sponges, profiled
For polishing paintwork
Diameter
mm
Thickness
mm
Packing unit Order
no.
80 25 1 6.24935
130 25 1 6.24936
160 25 1 6.24937
200 25 1 6.24938
Cling-fit felt polishing discs, hard
For paintwork, non-ferrous metals, and steel sheets
Diameter
mm
Thickness
mm
Packing unit Order
no.
130 5 1 6.31242
150 5 1 6.31168
180 5 1 6.24919
MACHINES
WOOD SANDING
ROUTERS
AND PLANERS
| 45
Page 2
ANGLE POLISHERS
Cling-fit felt polishing discs, soft
For paintwork, non-ferrous metals,
and steel sheets
Diameter
mm
Thickness
mm
Packing unit Order
no.
130 5 1 6.24964
155 5 1 6.24965
180 5 1 6.24966
Cling-fit lambswool polishing discs
For high-gloss polishing
Diameter
mm
Packing unit Order
no.
85 1 6.24063
130 1 6.31223
160 1 6.31217
185 1 6.24929
Cling-fit abrasive nylon web
For roughing, cleaning, scouring ...
Diameter
mm
Grit Packing unit Order
no.
80 P 100 2 6.24067
80 P 280 2 6.24068
125 P 100 1 6.31238
125 P 280 1 6.31239
150 P 100 1 6.24038
150 P 280 1 6.24039
Velcro-faced intermediate disc
For sanding curved surfaces
Diameter
mm
Hardness
Version Order
no.
80 Soft Perforated 6.24061
125 Soft Not
6.31216
perforated
150 Soft Not
6.24037
perforated
Felt polishing discs
With female thread M 14
Diameter
mm
Packing unit Order
no.
125 1 6.23260
175 1 6.23261
Moltopren polishing discs
With female thread M 14
Diameter
mm
Packing unit Order
no.
160 1 6.23254
Lambswool bonnets with tightening cord
For high-gloss polishing
Diameter
mm
Packing unit Order
no.
130 1 6.23266
160 1 6.23267
180 1 6.23265
Buffing mops
DiametermmThick-
ness
Packing unit Order
no.
mm
Grey cotton cloth,
200 20 1 6.23246
for general polishing
work
Flannel for
200 20 1 6.23247
high-gloss
polishing work
Anchor-head holder for buffing mops
Order
no.
For 2 buffing mops with flanges
6.23107
and adjusting nut
Polishing paste
Order
no.
Polishing paste
6.27231
Packing unit: 1
For metal and plastic,
bolt with approx. 300 g
46 |
Page 3
BURNISHING MACHINES
EQUIPMENT FEATURES
For burnishing, finishing and reconditioning special steel, steel,
non-ferrous heavy metals, plastic and wood
Precise machine guidance by supporting rollers
Spindle lock
Robust Metabo Marathon motor
Vario Tacho Constamatic (VTC) electronics allow you to set the
right speed for the application and then maintain that speed,
even under heavy loading
Thumbwheel for preselection of speed
Electronic soft start
Overload protection
No-volt release switch
Metabo winding protection grid
Auto-stop carbon brushes
Die cast aluminium gear housing
Standard holder for accessory - M14 or mounting arbor
Versatile applications through the extensive range
of accessories
Expansion roller
Expansion roller
For using grinding belts and
abrasive sleeves. The grinding
belts/ abrasive sleeves are pushed
over the roller and clamped
securely by centrifugal force.
New easy belt fit design.
Diameter: 90 mm
Width: 100 mm
Sanding belts 90x100 mm
Material: zirconia alumina
Suitable for all metals and even
For removing scratches and
Only in combination with the
Diameter
mm
Width
mm
Order
no.
6.23470
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
stainless steel
smoothing weld seams
expansion roller 6.23470
Grit Packing unit Order
no.
SE 12-115
1200 Watt
Burnishing Machine
SE 12-115
Comparative device characteristics
Rated input power 1.200 W
Output power 720 W
Speed 900 - 2.810 /min
Spindle thread M 14
Electronics Vario Tacho Constamatic (VTC)
Abrasive wheel diameter 100 - 115 mm
Abrasive wheel width 50 - 100 mm
Weight (without mains cable) 3 kg
Type SE 12-115
Order no. 6.02115.51
Standard equipment Steel sheet carrier box
Type SE 12-115 Set
Order no. 6.02115.50
90 100 P 40 10 6.23512
90 100 P 60 10 6.23473
90 100 P 80 10 6.23474
90 100 P 120 10 6.23475
90 100 P 220 10 6.23476
Nylon web abrasive sleeves
For removing scratches and oxide layers,
tarnishing, glazing, deburring and
fine grinding
Only in combination with the
expansion roller
Diameter
mm
Width
mm
Version Packing unit Order
no.
90 100 Coarse 2 6.23519
90 100 Medium 2 6.23495
90 100 Fine 2 6.23496
Flap grinding wheels
For removing rust, oxide layers, scratches
For texturing and glazing metal
Diameter
mm
Width
mm
Grit Packing unit Order
no.
105 100 P 40 1 6.23477
105 100 P 60 1 6.23513
105 100 P 80 1 6.23479
105 100 P 120 1 6.23480
105 100 P 180 1 6.23481
105 100 P 240 1 6.23482
MACHINES
WOOD SANDING
Standard equipment 3 spacer rings, expansion roller,
grinding belt bush set P 80,
fleece wheel P 280, bladed
grinding wheel P 80, fleece
wheel with aluminium oxide
abrasive paper P 180, steel
sheet carrier box
ROUTERS
AND PLANERS
| 47
Page 4
BURNISHING MACHINES
Flap/ nylon web grinding wheels
Pink aluminium oxide grinding flaps
combined with grain-coated nylon web
For tarnishing, glazing and removing
scratches on metal
Removing old paint and smoothing
wood materials
Diameter
mm
Width
mm
Grit Packing
unit
Order
no.
105 50 P 60 1 6.23526
105 50 P 80 1 6.23527
105 50 P 180 1 6.23528
105 100 P 60 1 6.23483
105 100 P 80 1 6.23484
105 100 P 180 1 6.23485
Nylon web grinding wheels
Elastic grain-coated nylon web for
shadow-free tarnishing, glazing and
polishing of special steel and
non-ferrous metals
For wood to smooth surfaces
Diameter
mm
Width
mm
Grit Packing
unit
Order
no.
105 50 P 60 1 6.23515
105 50 P 80 1 6.23516
105 50 P 180 1 6.23517
105 50 P 280 1 6.23518
105 100 P 60 1 6.23486
105 100 P 80 1 6.23487
105 100 P 180 1 6.23488
105 100 P 280 1 6.23514
105 115 P 400 1 6.23468
105 115 P 600 1 6.23469
105 115 P 900 1 6.23494
Hard nylon web grinding wheel
For cleaning and descaling weld seams
Removing rust, oxide layers and paint
Strong longitudinal grinding of
stainless steel
Diameter
mm
Width
mm
Grit Packing
unit
Order
no.
110 100 P 46 1 6.23525
Rubber grinding wheels
PUR rubber with SIC abrasive
grain coating
For removing small scratches.
For bright shining, decorative
longitudinal grinding of stainless
steel and non-ferrous metals
Diameter
mm
Width
mm
Grit Packing
unit
Order
no.
105 100 P 60 1 6.23510
105 100 P 180 1 6.23499
Polishing rings
Order
no.
Sisal polishing rings
For pre-polishing vanadium steel
6.23507
and non-ferrous metals
For use only with polishing paste
Diameter: 100 mm
Width: 15 mm
Version: Impregnated
Packing unit: 5
Nylon web polishing rings
For polishing stainless steel
6.23508
and non-ferrous metals
For use only with polishing paste
Diameter: 100 mm
Width: 10 mm
Version: Hard
Packing unit: 8
Nylon web polishing rings
For high-gloss polishing
6.23509
of all metals
For use only with polishing paste
Diameter: 100 mm
Width: 10 mm
Version: Soft
Packing unit: 8
Polishing pastes
Order
no.
Polishing paste, white
For pre-polishing
6.23520
stainless steel
Weight: 250 g
Polishing paste, brown
For polishing stainless steel
6.23522
and pre-polishing non-ferrous
metals
Weight: 250 g
48 |
Page 5
BURNISHING MACHINE
Polishing paste, blue
For high-gloss polishing
of all metals
Weight: 250 g
Wheel brushes
Diameter
mm
Steel-wire wheel brushes
For derusting, deburring
and cleaning metal
For brushing soft annual
rings on wood
100 15 0.27 mm 6.23500
100 70 0.27 mm 6.23501
Steel-wire wheel brushes, inox
With stainless wire.
For cleaning weld seams,
deburring, derusting,
roughening
100 15 0.20 mm 6.23502
WidthmmWire
thickness
Order
no.
6.23524
Order
no.
3 spacer rings
For width compensation
on using grinding rollers,
brushes, polishing rings
Order
no.
6.23511
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
100 70 0.20 mm 6.23503
Plastic wheel brushes
Elastic, grain-coated wheel brush
for roughening and deburring metal
For rustic effects on wood
100 15 6.23504
100 70 6.23505
Fibre wheel brush
For use on all wood materials.
For polishing etched
wood materials
Producing dull finish.
Dust removal and cleaning
100 100 6.23506
MACHINES
WOOD SANDING
ROUTERS
AND PLANERS
| 49
Page 6
METAL CHOP SAW
EQUIPMENT FEATURES
For single phase alternating current
Especially suitable for the fast, precise cutting of steel,
non-ferrous metals, iron and cast profile
Motor and gear supported on high load ball bearings
Spindle lock for easy disc change
Quick clamping device with variable mitre conversion
up to 45° and – 15°
Easy to transport due to built-in handle and
locking device
Swivelling blade guard
Adjustable spark guide plate
Bottom access guard
Adjustable depth guide
CUTTING DISCS FOR TABLETOP
CUTTING MACHINES
Quality class A 36-R "Flexiamant Super" inox
Medium-hard special cutting disc
for stainless steel
High cutting output with
good tool life
Diameter
x thickness
Maximum speed
/min
x bore
mm
350 x 3 x 25,4 4.365 10 6.16343
Quality class A 30-R / A 36-S "Flexiamant Super" steel
High cutting output with good
tool life in steel
Tough type for powerful machines
A 36-S: with an inside gauze
for quick cuts
Maximum working speed 80 m/s
Packing unit Order
no.
CS 23-355
NEW
2300 Watt
Metal Chop Saw
CS 23-355
Comparative device characteristics
Disc diameter 355 mm
Spindle diameter 25,4 mm
No load speed 4.000 /min
Rated input power 2.300 W
Maximum cutting dimension
- Bar steels 65 mm
- Pipes 125 mm
- Shaped steels 115 x 130 mm
Maximum opening of vice jaws 238 mm
Dimensions of the base plate 468 x 282 mm
Transport height 400 mm
Weight 16,9 kg
Quality
class
Diameter
x thickness
x bore
Maximum
speed
/min
Packing unit Order
no.
mm
A 30-R 350 x 3 x 25,4 4.365 10 6.16327
A 36-S 350 x 3 x 25,4 4.365 10 6.16339
Quality class A 24-M "Flexiamant Super" steel
High cutting output with good
tool life in steel
Soft type for less powerful machines
Diameter
x thickness
Maximum speed
/min
Packing unit Order
no.
x bore
mm
350 x 3 x 25,4 4.365 10 6.16338
Standard equipment Open-ended ring spanner
Type CS 23-355
Order no. 6.02335
50 |
Page 7
CURVE SHEARS, NIBBLERS
COMMON FEATURES
For cutting through and trimming sheet steel without burrs
Precise cutting by high capacity die chuck
The blades need not be aligned while working
Auto-stop carbon brushes
Practical delivery bow
EQUIPMENT FEATURES
Unlimited curving capacity
For cutting sheets without burrs and deformations
Precise adjustment of direction of cutting
Long service life of tool and high cutting quality
Auto-stop carbon brushes
Practical delivery bow
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
Ku 6872 Ku 6870 Kn 6875
550 Watt
Curve Shear
Ku 6872
Comparative device
characteristics
Torque 3 Nm 6 Nm
Maximum sheet thickness
- Sheet steel 400 N/mm² 1,6 mm 2,5 mm
- Sheet steel 600 N/mm² 1,2 mm 2 mm
- Sheet steel 800 N/mm² 1 mm 1,6 mm
- Aluminium 250 N/mm² 2 mm 2,5 mm
Strokes at no load 5.300 /min 3.000 /min
Rated input power 550 W 550 W
Output power 300 W 300 W
Strokes at rated load 3.200 /min 1.800 /min
Minimum curve radius 15 mm 20 mm
550 Watt
Curve Shear
Ku 6870
Comparative device characteristics
Torque 6 Nm
Maximum sheet thickness
- Sheet steel 400 N/mm² 2 mm
- Sheet steel 600 N/mm² 1,5 mm
- Sheet steel 800 N/mm² 1 mm
- Aluminium 250 N/mm² 2,5 mm
Strokes at no load 3.000 /min
Rated input power 550 W
Output power 300 W
Strokes at rated load 1.800 /min
Minimum curve radius 4 mm
Weight (without mains cable) 2,1 kg
Weight (without mains cable) 1,9 kg 2,5 kg
Standard equipment Hexagon spanner
Standard equipment 2 hexagon
spanners
Type Ku 6872 Ku 6870
Order no. 6.06872
Reversible blade
Same blade for tappet and cutting bench
2 hexagon
spanners
6.06870
Type Kn 6875
Order no. 6.06875
Accessories for nibblers
Order
Reversible blade for Ku 6872
Reversible blade for Ku 6870
no.
6.31042
6.30201
Spare punch
For the nibbler Kn 6875 (as spare)
Die
For the nibbler Kn 6875 (as spare)
Die
For the nibbler Kn 6875
(maximum sheet thickness, 1.25 mm)
550 Watt
Nibbler
Kn 6875
Order
no.
6.30202
6.30203
6.30204
MACHINES
WOOD SANDING
ROUTERS
AND PLANERS
| 51
Page 8
DIE GRINDERS
EQUIPMENT FEATURES
The handy one: with particular short construction;
ideal for sharpening and deburring in easy to reach places
Hardened and ground collect chuck for precise
concentricity of tools
Ergonomic shape for fatigue-free grinding
Auto-stop carbon brushes
Suitable for actuating flexible shafts
COMMON FEATURES
Hardened and ground collect chuck for precise
concentricity of tools
Spindle lock for easy tool change
Robust aluminum die cast bearing flange
Ergonomic shape for fatigue-free grinding
Vario Constamatic (VC) electronics allow you to
set the right speed for the application and then
maintain that speed, even under moderate loading
Thumbwheel for preselection of speed
Robust Metabo Marathon motor
Metabo winding protection grid
Auto-stop carbon brushes
G 500 GE 700 GE 900 Plus
500 Watt
Die Grinder
G 500
Comparative device characteristics
No load speed 27.000 /min
Rated input power 500 W
Output power 300 W
Rated load speed 16.000 /min
Collet bore of collet chuck 6 mm
Weight (without mains cable) 1,4 kg
Standard equipment 2 open-jawed spanner
Type G 500
Order no. 6.06301
710 Watt
Electronic
Die Grinder
GE 700
900 Watt
Electronic
Die Grinder
GE 900 Plus
Special advantages
The multi-talented one:
with extended grinding
spindle (mounted on
double ball bearing in
solid steel tube); ideal for
grinding and sharpening in
difficult to reach places
The specialist: handy
grinder with especially high
torque; ideal for grinding
inner and outer surfaces
in combination with flap
wheels (see Accessories)
Suitable for actuating
flexible shafts
Comparative device
characteristics
No load speed 7.000 -
27.000 /min
2.500 -
6.000 /min
Rated input power 710 W 900 W
Output power 430 W 500 W
Rated load speed 20.000 /min 5.000 /min
Collet bore of collet chuck 6 mm 6 mm
Weight (without mains cable) 1,8 kg 2 kg
Collets
52 | 52 |
Collet bore Order
no.
3 mm 6.31947
1/8" (3.18 mm) 6.31948
6 mm 6.31945
1/4" (6.35 mm) 6.31949
8 mm 6.31946
Standard equipment 1 open-jawed
spanner
Handle, 1 open-
jawed spanner
Type GE 700 GE 900 Plus
Order no. 6.06303
6.06305
Page 9
ACCESSORIES FOR DIE GRINDERS
Mounted points
Grit and
grade
Shaft ØmmHead
Ø and
height
mm
Mounted points made of pink aluminium oxide,
shank diameter 6 mm
80 M 6 Ø 20 x 32 14 6.27411
80 M 6 Ø 20 x 32 14 6.27412
80 M 6 Ø 25 x 25 17 6.27413
80 M 6 Ø 20 x 20 20 6.27415
80 M 6 Ø 20 x 32 14 6.27416
80 M 6 Ø 16 x 32 20 6.27417
80 M 6 Ø 10 x 25 20 6.27418
Mounted points made of aluminium oxide,
shank diameter 6 mm
60 O 6 Ø 25 x 32 8 6.27419
60 O 6 Ø 25 x 32 8 6.27420
Small cutting discs for steel
Diameter
x thickness
x bore
Maximum
speed
/min
mm
Corundum abrasive A 24, for steel
Maximum working speed: 80 m/s
50 x 1,1 x 6 30.600 50 6.30191
50 x 2 x 6 30.600 25 6.30192
50 x 6 x 6 30.600 1 6.30187
76 x 2 x 6 20.800 25 6.30194
76 x 1,1 x 6 20.100 50 6.30195
76 x 2 x 10 20.100 50 6.30199
Mounting arbor for small cutting discs
Shaft Ø: 6 mm
Suitable for machine: G 500, GE 700
Router bits
DiametermmUsable
length
mm
Router bits, medium-rough toothed,
shank diameter 6 mm
Suitable for light alloys, copper,
plastics, etc.
HSS straight bit,
rounded off
610
HSS straight bit
620
HSS straight bit
10 14
HSS dovetail bit
12 12 10
HSS chamfering bit
10 17 16
Maximum per-
Order
no.
missible
shaft
length l
o
mm
Packing
unit
Order
no.
Order
no.
6.30189
Angle ° Order
no.
6.23570
6.23571
6.23572
6.23573
6.23574
Router bits
DiametermmOverall
length
Router bits, fine toothed,
shank diameter 6 mm
Suitable for light alloys, copper,
brass, tin, plastics, etc.
HSS router bit,
spherical
4,5
HSS router bit,
spherical
12
HSS router bit,
tear-shaped
12 20
HSS router bit,
conical
12 20
HSS dovetail bit
12 12 10
HSS router bit,
pear-shaped
12 30
HSS straight bit
10 14
Flap wheels
Shaft Ø
Grit Diameter
mm
Suitable for die grinder
GE 900 Plus
6 P 60 Ø 50 x 20 15.300 6.31110
6 P 60 Ø 60 x 30 12.700 6.31111
6 P 60 Ø 60 x 40 12.700 6.31112
General accessories
Clamping stand
For clamping the router
motor when working with
the flexible shafts
Locating bore Ø 43 mm
Clamp
For the secure fitting
on a work table
Flexible shaft
Suitable for speeds of 20,000
to 30 000 rpm
Bearing-mounted at both ends
Equipped with collet for size 6 mm,
6.30714
To drive the flexible shaft 6.27609
using the router's motor unit,
the 8-mm collet on the tool
must be replaced with the 6-mm
collet 6.31945
Length: 1,3 m
Driving shaft: 6 mm
Weight: 0,8 kg
Collets for flexible
shaft 27609
Collet bore: 6 mm 6.30714
Collet bore: 3 mm 6.30715
Collet bore: 1/4" (6.35 mm) 6.30716
Usable
length
mm
x width
mm
Angle ° Order
no.
6.23575
6.23576
6.23577
6.23578
6.23579
6.23580
6.23581
Maximum
Order
no.
speed
/min
Order
no.
6.27354
6.27107
6.27609
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
MACHINES
WOOD SANDING
ROUTERS
AND PLANERS
| 53| 53
Loading...