COMMON FEATURES
Ready mounted
Suitable for thickest logs
With wheel set and phase inverter
Optimum work safety
Sturdy welded construction – therefore no corrosion
and suitable for tough continuous use
For three phase current , 400 V
LOG CUTTING SAWS
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
Log
Cutting Saw
BW 600
with wheel set
Log
Cutting Saw
BW 750
with wheel set
Special advantages
Optimum pivotal
point for easy work
Comparative device
characteristics
Dimensions L x W x H 1.225 x 795 x
1.050 mm
950 x 790 x
1.110 mm
Saw blade diameter 600 mm 700 mm
Cutting diameter 210 mm 240 mm
- With reversing tool 320 mm 350 mm
Working height 900 mm 780 mm
Balance surface, left 540 mm 500 mm
Balance surface, right 155 mm 200 mm
Cutting speed 45,5 m/s 55 m/s
Mains voltage 400 V 400 V
Rated input power 4,2 kW 7,4 kW
Weight 95 kg 127 kg
Type BW 600 BW 750
Order no. 0106004200 0190707500
Standard equipment Circular saw blade
with peg tooth
(56 teeth), wheel set
Carbide circular
saw blade with
alternately bevel-
ground tooth
(42 teeth), wheel set
BW 750BW 600
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
Version Order no.
pitch
For BW 600
Chrome-
600 x 2,8 x 30 56 Peg tooth 0910003445
vanadium
steel
Tungsten
carbide
600 x 3,8 x 30 26 Alternately
bevel-ground
0910003470
tips
For BW 750
Electro steel 700 x 3,2 x 30 56 Peg tooth 0910003399
Chrome-
700 x 3,2 x 30 56 Peg tooth 0910003453
vanadium
steel
Tungsten
carbide
700 x 4,2 x 30 42 Alternately
bevel-ground
0910003488
tips
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
| 233
| 233
COMPRESSED
AIR SYSTEMS
LOG SPLITTERS
EQUIPMENT FEATURES
With mobile stand – for a back-friendly operating height
and easy transportation
Guide plates directly at the splitting point for better guidance
of shorter wooden pieces
5 tonne splitting force for firewood up to 250 mm Ø
Motor with 2200 Watt power and for protection with
overload switch
Optimum protected two-hand safety circuit
For single phase alternating current
For adjusting to the wood length: stroke adjustable
in two steps and additionally adjustable piston length
COMMON FEATURES
Easy and safe handling by 2-lever safety circuit
Hardened splitting wedge
Large recessed safety handles for protection
and for maximum safety
Wheel set for easy transportation
Foldable hoop guard protects the splitting material from
breaking apart and falling in an uncontrolled manner
Table can be adjusted to three levels for the processing
of longer logs
Closed lower housing section for more stability.
Optimum protection for the hydraulic system
Ergonomically located on/off switch
HS 5000 W HS 6001 DHS 6001 W
Log Splitter
HS 5000 W
Comparative device characteristics
Splitting force 5 t
Split length (maximum) 520 mm
Maximum stroke height 320 mm
Feed 4,5 cm/s
Return 9,5 cm/s
Dimensions L x W x H 1.200 x 260 x 485 mm
Mains voltage 230 V
Rated input power 2,2 kW
Weight 50 kg
Type HS 5000 W
Order no. 0170005000
Log Splitter
HS 6001 W
Log Splitter
HS 6001 D
Special advantages
phase inverter
For single phase
alternating current
For three phase current
Comparative
device characteristics
Splitting force 6 t 6 t
Split length (maximum) 1.040 mm 1.040 mm
Maximum stroke height 480 mm 480 mm
Feed 4 cm/s 5 cm/s
Return 14 cm/s 14 cm/s
Dimensions L x W x H 860 x 930 x
1.040 mm
860 x 930 x
1.040 mm
Mains voltage 230 V 400 V
Rated input power 3 kW 3,5 kW
Weight 125 kg 125 kg
Type HS 6001 W HS 6001 D
Order no. 0170006001 0170006101
234 |
LOG SPLITTERS
EQUIPMENT FEATURES
Easy and safe handling by 2-lever safety circuit
Hardened splitting wedge
Large recessed safety handles for protection and for maximum
safety
Wheel set for easy transportation
Foldable hoop guard protects the splitting material from breaking
apart and falling in an uncontrolled manner
phase inverter
Two swivelling splitting tables for 3 stages
For three phase current
Cross cutters
For pushing onto the splitting blade
Number of operating cycles and required time is halved
Cross cutter HS 6000 W/D HS 8000 D Combi
Pot-galvanised
Cross cutter HS 6001 W/D
Splitting wedge width extension
Splitting wedge width extension
HS 6000 W/D - HS 8000 D Combi
Pot-galvanised
Suitable for: HS 6000 W, HS 6000 D
and HS 8000 D Combi
Order no.
0910057570
0910063936
Order no.
0910058614
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
HS 8000 D
Combi
Log Splitter
HS 8000 D Combi
Comparative device characteristics
Splitting force 8 t
Split length (maximum) 1.085 mm
Maximum stroke height 475 mm
Feed 7,3 cm/s
Return 23,7 cm/s
Dimensions L x W x H 730 x 520 x 1.120 mm
Mains voltage 400 V
Rated input power 4 kW
Weight 126 kg
Hydraulic oil
Hydraulic oil for log splitters
1 litre
Order no.
0910011936
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
Type HS 8000 D Combi
Order no. 0170800001
| 235
COMPRESSED
AIR SYSTEMS
WOOD PROCESSING TECHNOLOGY
CUTTING
EDGE
PRECISION.
Metabo offer a wide range of wood working machinery. The
quality is always high and the machines are always profes-
sional. We have a range capable of catering for everything
from the active bespoke workshop to the small scale batch
production facility and on again to the serious specialist user.
Built for the job, built to last, built for cutting edge precision.
Metabo. Work. Don’t play.
236 |
WOOD PROCESSING TECHNOLOGY
| 237
CROSSCUT SAWS, CROSSCUT AND MITRE SAWS
MORE THAN JUST PRACTICAL.
Cross cut and mitre saws are designed for cutting lengths
of material to length at 90° angles or with either a mitre
angle or bevel angle or both. These are used for making
internal / external frames, cutting dado rails, skirting or
coving etc. Some models can also be used for trenching,
e.g. KGS 303 Plus
Powerful
The 1.8 kW centrally mounted universal
motor is clear from view and stable
even when at full bevel tilt.
Comes with soft start.
particularly useful for when making quick simple joints,
for example, housing joints or lap joints. With the right
blade and machine type crosscut and mitre saws are
capable of cutting wood, plastics, coated wood, alu -
minium extrusion and other soft metals.
Saw blade stop
For the easy change
of the saw blade.
Integrated cutting depth
adjustment
For trenching, for example
when making housing
or lap joints.
High fence profiles
For secure and safe support
of the work piece.
Built-in holder grooves
The table width extension is
simply hooked in and clamped.
Without any tools at all.
Giving clear view of the cutting
Flange laser
line, particularly useful for
when making repeat cuts.
Turntable range from 50° to
the left to 60° to the right.
For Mitre cuts
Light and sturdy
Low weight (19 kg) but still
sturdy due to aluminium
die cast construction.
Saw head inclination up to 48° on both
sides
For all cuts, the coated side of the material
is on top thus ensuring cleaner cutting
edges.
238 |
Infinitely variable adjustment of the
turntable
The precise degree scale enables the
infinitely variable adjustment of the
turntable by 50° to the left and 60° to
the right. All common angle positions
are equipped with a snap-lock function.
Precise cuts are ensured
in any desired position with the multisupported draw gear. Fixed position
during transport or non-use.
EQUIPMENT FEATURES
For all cutting tasks, ideal for interiors
Simple cutting of all angular, bevel and rafter cuts
Powerful, universal motor
Turntable with precise angle adjustment
Die-cast aluminium work bench
Low own weight for easy transport
Ergonomically shaped handle for comfortable and light working
Horizontal angle adjustment, left and right up to 46°
CROSSCUT SAWS
Continuous graduation, stop points at 15°, 22.5°, 30°, 45°
Saw head inclination from 0° to 45°
Saw blade stop for easy saw blade change
Laser for exact display of the cut
Transport lock
Assembly of table length extensions without tools
Chip collection bag for clean air at the workplace
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
Crosscut Saw
KS 210 Lasercut
Comparative device characteristics
Dimensions L x W x H 460 x 390 x 485 mm
Support surface 138 x 390 mm
Cutting width
- 90° 120 mm
- 45° 80 mm
Cutting depth
- 90° 65 mm
- 45° 40 mm
No load speed 5.000 /min
Rated load speed 3.757 /min
Cutting speed 66 m/s
Saw blade Ø 210 x 30 mm
Adjustment options
- Turntable left (maximum) 46 °
- Turntable right (maximum) 46 °
- Saw head left (maximum) 45 °
Rated input power 1,35 kW
Output power 0,62 kW
Weight 9 kg
Standard equipment Carbide saw blade with
alternately bevel-ground tooth
(40 teeth), 2 table length
extensions, work clamp,
tool for saw blade change,
chip extraction connections,
dust bag, laser
Type KS 210 Lasercut
Order no. 0102101000
KS 210 Lasercut
Accessories
Work clamp
For the secure clamping of
smaller workpieces, plastic
or aluminium profiles
Circular saw blades
Top cutting results thanks to
teeth ground on all sides and
high accuracy of flatness
and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
pitch
Tungsten
210 x 1,8 x 30 24 Alternately
carbide
Tungsten
210 x 2,4 x 30 40 Alternately
carbide
Tungsten
210 x 2,4 x 30 64 Flat tooth/
carbide
Order no.
0910057553
Version Order no.
6.28008
bevel-ground
tips
6.28037
bevel-ground
tips, 3°
6.28082
trapezoidal
tooth, 5° neg.
WOOD-PROCESSING
WATER-/PUMP
WELDING
COMPRESSED
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
AIR SYSTEMS
| 239
CROSSCUT AND MITRE SAWS
COMMON FEATURES
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, universal motor , stops in 4.5 seconds
Stable design, mobile and sturdy
Turntable with precise angle adjustment
Die-cast aluminium work bench
Low own weight for easy transport
Horizontal angle adjustment, left and right up to 47°
Saw head inclination from -2° to 47°
Precisely supported draw gear for cuts up to max. 255 mm
Extensive range of accessories
KGS 255 KGS 255 Plus
... with sliding function... with sliding function
NEW
Crosscut and Mitre Saw
KGS 255
Crosscut and Mitre Saw
KGS 255 Plus
Special advantages
Standard-equipped with
a flange laser
Integrated cutting depth control
Transport lock
Chip collection bag for clean air at
the workplace
Comparative device characteristics
Dimensions L x W x H 508 x 747 x 470 mm 1.020 x 508 x 470 mm
Support surface 272 x 437 mm 272 x 437 mm
Cutting width
- 90° 255 mm 255 mm
- 45° 177 mm 177 mm
Cutting depth
- 90° 60 mm 60 mm
- 45° 30 mm 30 mm
No load speed 5.700 /min 5.700 /min
Rated load speed 3.041 /min 3.041 /min
Cutting speed 66 m/s 66 m/s
Saw blade Ø 210 x 30 mm Ø 210 x 30 mm
Adjustment options
- Turntable left (maximum) 47 ° 47 °
- Turntable right (maximum) 47 ° 47 °
- Saw head left (maximum) 47 ° 47 °
- Saw head right (maximum) -2 ° -2 °
Mains voltage 230 V 230 V
Rated input power 1,3 kW 1,3 kW
Output power 0,75 kW 0,75 kW
Weight 14,5 kg 17 kg
Standard equipment Carbide saw blade with alternately
bevel-ground tooth (20 teeth), tool for saw
blade change, chip extraction connections
Carbide saw blade with alternately
bevel-ground tooth (40 teeth), 2 table length
extensions, work clamp, tool for saw blade
change, chip extraction connections,
dust bag, laser
Type KGS 255 KGS 255 Plus
Order no. 0102550000
0102550038
0102550039
GB
230 V
GB
110 V
0102550100
0102550138
0102550139
240 |
GB
GB
230 V
110 V
COMMON FEATURES
For all cutting tasks, ideal for interiors
For cutting wood, coated panels and plastics
Induction motor – soft and powerful , maintenance free
With electronic motor brake , stops in 3.5 seconds
Stable design, mobile and sturdy
Die-cast aluminium work bench
High precision and good working results
ensured by the stable saw head
CROSSCUT AND MITRE SAWS
Saw head inclination from 0° to 45°
Turntable adjustable by 45º on both sides
Assembly bores for table assembly and
positioning laser (accessories)
Extensive range of accessories
... with sliding function... with sliding function
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
KGS 301 KGS 331
Crosscut and Mitre Saw
KGS 301
Crosscut and Mitre Saw
KGS 331
Comparative device characteristics
Dimensions L x W x H 510 x 470 x 490 mm 510 x 470 x 490 mm
Support surface 450 x 480 mm 450 x 480 mm
Cutting width
- 90° 300 mm 300 mm
- 45° 212 mm 212 mm
Cutting depth
- 90° 53 mm 53 mm
- 45° 54 mm 54 mm
No load speed 3.000 /min 3.000 /min
Rated load speed 2.800 /min 2.800 /min
Cutting speed 36,5 m/s 36,5 m/s
Saw blade Ø 250 x 30 mm Ø 250 x 30 mm
Adjustment options
- Turntable left (maximum) 45 ° 45 °
- Turntable right (maximum) 45 ° 45 °
- Saw head left (maximum) 45 ° 45 °
Rated input power 1,6 kW 1,6 kW
Output power 0,6 kW 0,6 kW
Weight 23 kg 23 kg
Standard equipment Carbide saw blade with alternately bevel-
ground tooth (24 teeth, 3° negative chipping
angle), tool for saw blade change,
chip extraction connections
Carbide saw blade with alternately bevel-
ground tooth (60 teeth, 5° negative chipping
angle), tool for saw blade change,
chip and dust extraction unit,
chip extraction connections
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
Type KGS 301 KGS 331
Order no. 0103001145 0103001153
DCHA
| 241
WELDING
COMPRESSED
TECHNOLOGY
AIR SYSTEMS
CROSSCUT AND MITRE SAWS
EQUIPMENT FEATURES EQUIPMENT FEATURES
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, universal motor
Soft start with natural dual belt friction braking, stops in 7.5 seconds
Stable design, mobile and sturdy
Turntable with precise angle adjustment
Die-cast aluminium work bench
High precision and good working results ensured
by the stable saw head
Turntable with patented advance angle adjustment
for selectable stop points
Multi-supported draw gear
Integrated cutting depth control
Transport lock
Integrated and extractable table width extensions
Extensive range of accessories
If a 315 mm saw blade is used, cutting sizes
For all cutting tasks, ideal for interiors
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, universal motor , stops in 3.5 seconds
Turntable with precise angle adjustment
Die-cast aluminium work bench
Suitable for right-handed and left-handed operators
Cutting width increased to 300 mm
Saw head can be tilted by up to 48° on both sides
Multi-supported draw gear
High guide profiles that can be moved at the side,
for the improved fixing of the workpiece
Standard-equipped with a flange laser
Integrated cutting depth control
Transport lock
Extensive range of accessories
Soft start with natural belt & gear friction braking
of 335 x 106 mm are possible
... with sliding function
... with sliding function
KGS 303 Plus KGS 305
Crosscut and Mitre Saw
KGS 303 Plus
Comparative device characteristics
Dimensions L x W x H 575 x 885 x 595 mm
Support surface 330 x 510 mm
Cutting width
- 90° 300 mm
- 45° 200 mm
Cutting depth
- 90° 81 mm
- 45° 54 mm
No load speed 5.020 /min
Rated load speed 2.580 /min
Cutting speed 66 m/s
Saw blade Ø 250 x 30 mm
Adjustment options
- Turntable left (maximum) 50 °
- Turntable right (maximum) 60 °
- Saw head left (maximum) 48 °
- Saw head right (maximum) 48 °
Rated input power 1,8 kW
Output power 1,1 kW
Weight 19 kg
Standard equipment Carbide saw blade with
alternately bevel-ground tooth
(48 teeth), high guide profiles
that can be moved at the sides,
tool for saw blade change, chip
extraction connections, laser
Crosscut and Mitre Saw
KGS 305
Comparative device characteristics
Dimensions L x W x H 1.180 x 1.040 x 690 mm
Support surface 1.040 x 360 mm
Cutting width
- 90° 320 mm
- 45° 226 mm
Cutting depth
- 90° 120 mm
- 45° 60 mm
No load speed 3.850 /min
Rated load speed 2.794 /min
Cutting speed 61,5 m/s
Saw blade Ø 305 x 30 mm
Adjustment options
- Turntable left (maximum) 50 °
- Turntable right (maximum) 60 °
- Saw head left (maximum) 47 °
- Saw head right (maximum) 47 °
Rated input power 2 kW
Output power 1,24 kW
Weight 29 kg
Standard equipment Carbide saw blade with
alternately bevel-ground tooth
(80 teeth), 2 table length extensions, work clamp, tool for saw
blade change, chip extraction
connections
Type KGS 303 Plus
Order no. 0103030000
0103030038
0103030039
242 |
GB
230 V
GB
110 V
Order no. 0103050000
0103050038
0103050039
GB
230 V
GB
110 V
Type KGS 305
CROSSCUT AND MITRE SAWS
Machine stand
Machine stand
For ideal working height and secure base
Can also be used on uneven surfaces
Collapsible, with height compensation
Suitable for: KGS 301, KGS 331
Universal machine stand
For ideal working height and secure base
Can also be used on uneven surfaces
Collapsible, with height compensation
Suitable for: KS 210 C, KGS 255, KGS 301, KGS 303,
KGS 305, KGS 331, KGT 300, DH 330
Order no.
0910003518
0910057529
KSU 400 roller supports
For long work pieces
The cut material can be
Width: 260 mm
NEW
KSU 400 support base
NEW
Additional support base
Long guide for KSU 400
Length: 615 mm
NEW
Table length extensions
For KGS 255, KGS 301 and KGS 331
Table length extension for
right and left
For the secure supporting
With collapsible length
Length: 350 mm
Width: 80 mm
Table length extensions
For KGS 255 and KGS 303
Table length extension right,
steel
For the secure supporting
of long workpieces
With length guide and scale,
up to 1,600 mm
Dimension slide for
repeating accuracy
Length: 1.140 mm
Width: 200 mm
easily transported using
rollers
for better support of the
KSU 400 when extended
of long workpieces
guide
Order no.
0910064592
0910064606
0910064720
Order no.
0910053230
Order no.
0910058886
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
TECHNOLOGY
WOOD-PROCESSING
NEW
Machine stand KSU 400
Machine stand and table extension in one sturdy
construction
Universal end profile makes it suitable for all the
conventional crosscut saws of well-known manufacturers
Sturdy legs with height adjustment
Extensive range of accessories
Max. total length 400 cm
Max. weight load in central part 250 kg
Weight: 25 kg
Suitable for: KGT 300, KGS 255, KGS 301, 331,
KGS 303, KGS 305, KS 210 C, KS 210 Lasercut, KS 210
Special accessories for KSU 400 machine stand
NEW
Wheel set
For easy transportation
Can also be used with the
stand folded up
0910066110
Order no.
0910064584
Table length extension left,
steel
For the secure supporting
of long workpieces
With length guide
and scale,
up to 1,600 mm
Dimension slide for
repeating accuracy
Can be used on left
and right with the
KGS 255
Length: 1.000 mm
Width: 200 mm
Table length extension right,
steel
For the secure
supporting
of long workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide
for repeating accuracy
Length: 1.140 mm
Width: 200 mm
0910058827
0910058894
| 243
WATER-/PUMP
WELDING
COMPRESSED
TECHNOLOGY
TECHNOLOGY
AIR SYSTEMS
CROSSCUT AND MITRE SAWS
Table length extensions
For KGS 301 and KGS 331
Table length extension left,
steel
For the secure supporting
of long workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Can be used on left
and right with the KGS 255
Length: 1.000 mm
Width: 200 mm
Table length extension right,
aluminium
For the secure supporting
of long workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Length: 1.130 mm
Width: 200 mm
Table length extension left,
aluminium
For the secure supporting
of long workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Can be used on left
and right with the KGS 255
Length: 1.000 mm
Width: 200 mm
Table length extension,
right
For the secure supporting
of long workpieces
With support surface,
scale and supplementary
stop for repeating
accuracy
Collapsible, easy to
transport
Supporting length
1,660 mm
Length: 1.440 mm
Width: 165 mm
Table length extension, left
For the secure supporting
of long workpieces
Telescope length
extension with
scale, extractable
up to 3,000 mm
Two support surfaces
with guide for
repeating accuracy
Collapsible, easy to
transport
Length: 1.650 mm
Width: 165 mm
Order no.
0910058835
0910057545
0910057537
Order no.
0910006525
0910003500
Table length extensions
For KGS 305
Table length extension
right, steel
For the secure
supporting of long
workpieces
With length guide
and scale,
up to 1,600 mm
Dimension slide for
repeating accuracy
Length: 1.140 mm
Width: 200 mm
Table length extension left,
steel
For the secure
supporting of long
workpieces
With length guide and
scale, up to 1,600 mm
Dimension slide for
repeating accuracy
Length: 1.000 mm
Width: 200 mm
Table length extension
right, aluminium
For the secure supporting
of long workpieces
With length guide and
scale, extractable up to
3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Length: 1.130 mm
Width: 200 mm
Table length extension left,
aluminium
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Length: 1.000 mm
Width: 200 mm
Extension profile for table length extension
Extension profile for table
length extensions
For extending the
1,600 mm table
length extension
to 3000 mm
Suitable for: KGS 255,
KGS 303, KGS 305
Length: 1.400 mm
Order no.
0910061895
0910061887
0910061917
0910061909
Order no.
0910058878
244 |
CROSSCUT AND MITRE SAWS
Supplementary stops
Work clamps
Supplementary stop
For the safe and
tear-free processing
of small workpieces
and strips
Also particularly
suitable for tall
workpieces
Suitable for: KGS 255,
KGS 303, KGT 300
Length guide
For repeating
accuracy even
when making
smaller cuts
Suitable for: KGS 301,
KGS 331
Work clamp
For the secure
clamping of smaller
workpieces, plastic
or aluminium profiles
Suitable for: KGS 301
Order no.
0910059831
0910009010
Order no.
0910031228
NEW
Roller stands
Positioning laser
For a perfect preview
of the sawing cut
Automatic activation by
means of tachometric
relay
The workpiece can be
positioned quickly and
securely for cutting
No more test cuts
Battery-powered line laser
with 6 spare batteries
Suitable for: KGS 303
Positioning laser
For a perfect preview
of the sawing cut
Automatic activation by
means of tachometric
relay
The workpiece can be
positioned quickly and
securely for cutting
No more test cuts
Battery-powered line laser
with 6 spare batteries
Suitable for: KGS 305
Order no.
0910063553
0910063952
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
Positioning laser
NEW
Work clamp
For the secure
clamping of smaller
workpieces, plastic
or aluminium profiles
Suitable for: KGS 255,
KGS 303, KGS 305,
KGT 300, KGT 501,
KS 210 C,
KS 210 Lasercut
Positioning laser
For a perfect preview
of the sawing cut
Automatic activation by
means of tachometric
relay
The workpiece can be
positioned quickly and
securely for cutting
No more test cuts
Battery-powered line laser
with 6 spare batteries
Suitable for: KGS 255
Positioning laser
For a perfect preview
of the sawing cut
The workpiece can be
positioned quickly and
securely for cutting
No more test cuts
Battery-powered
line laser
Suitable for: KGS 301,
KGS 331, KGT 500,
KGT 501
0910057553
Order no.
0910064738
0910040553
For supporting long workpieces when sawing,
moulding/routing, planing and drilling
Sturdy, height-adjustable and foldable
Roller stand RS 420
With smooth-rolling
special steel rollers with
a high load capacity
Width: 400 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 G
With smooth-rolling
chromium-plated
ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 W
With smooth-rolling
chromium-plated
ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material,
round or square workpieces
Width: 420 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Order no.
0910053353
0910053345
0910053361
WOOD-PROCESSING
WATER-/PUMP
WELDING
COMPRESSED
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
AIR SYSTEMS
| 245
CROSSCUT AND MITRE SAWS
Chip and dust extraction units
Suction adapter
44 mm
diameter-Ø
35 mm
bore-Ø
100 mm
diameter-Ø
bore-Ø
44 mm
58 mm
58 mm
44 mm
diameter-Ø
Push block
Push block
For the lateral guiding
of the workpiece
Chip and dust extraction
unit
For a cleaner work
environment and an
unobstructed view
of the workpiece
you want to cut
Standard equipment for
the KGS 331
Extraction nozzle Ø: 100 mm
Suitable for: KGS 301,
KGS 331
Chip and dust extraction
unit
For a cleaner work
environment and an
unobstructed view
of the workpiece
you want to cut
For connection to
a chip and dust
extraction system
or the Metabo
multi-purpose
vacuum cleaner
Suction in two places
(the machine's suction
connection and the
protective cover's
extraction nozzle)
Consists of suction
hose and 2 connectors
Extraction nozzle Ø: 100 mm
Suitable for: KGS 305
Suction adapter
For connecting
the crosscut
and mitre saws
to the Metabo
multi-purpose
vacuum cleaner
Connection option
for a Metabo dust
bag 6.31289
Suction adapter Multi
For KGS 255 / KGS 305
For KGS 303 only
with chip and dust
extraction unit
order no. 0910057561
Order no.
0910003496
0910061127
Order no.
0910059955
0910058010
Order no.
0910057200
Spray for maintenance and care
Spray for maintenance and care
Ideal for maintenance
and care of wood
processing machines
Contains silicon, prevents
saw dust from sticking,
e.g. to threaded rods or
sliding bearings
Increases the sliding
quality of the workpieces
on the machine table
High cleaning capacity
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
pitch
For KGS 255
Tungsten
210 x 1,8 x 30 24 Alternately
carbide
Tungsten
210 x 2,4 x 30 40 Alternately
carbide
Tungsten
210 x 2,4 x 30 64 Flat tooth/
carbide
For KGS 301, KGS 303 and KGS 331
Tungsten
250 x 2,8 x 30 24 Alternately
carbide
Tungsten
250 x 2,4 x 30 48 Alternately
carbide
Tungsten
250 x 2,4 x 30 60 Alternately
carbide
Tungsten
250 x 2,8 x 30 80 Flat tooth/
carbide
For KGS 305
Tungsten
305 x 2,4 x 30 60 Alternately
carbide
Tungsten
305 x 2,4 x 30 80 Alternately
carbide
Tungsten
305 x 2,8 x 30 96 Flat tooth/
carbide
Tungsten
315 x 2,8 x 30 84 Alternately
carbide
Order no.
0911018691
Version Order no.
6.28008
bevel-ground
tips
6.28037
bevel-ground
tips, 3°
6.28082
trapezoidal
tooth, 5°
negative
6.28013
bevel-ground
tips, 3°
negative
6.28047
bevel-ground
tips, 5°
negative
6.28048
bevel-ground
tips, 5°
negative
6.28088
trapezoidal
tooth, 5°
negative
6.28054
bevel-ground
tips
6.28055
bevel-ground
tips
6.28091
trapezoidal
tooth
6.28058
bevel-ground
tips
246 |
Loading...