You are welcome to forward any queries or suggestions you may have regarding this Operator's
Manual to the technical documentation team at
the following address:
Daimler AG: Not to be reprinted, translated or
otherwise reproduced, in whole or in part, without written permission from Daimler AG.
Vehicle manufacturer
Daimler AG
Mercedesstrae 137
70327 Stuttgart
Germany
As at 03.11.2016
Welcome to the world of Mercedes-Benz
First of all, familiarize yourself with your multimedia system. Read these operating instructions, particularly the safety and warning notes,
before you drive off.
This will help you to obtain the maximum pleasure from your multimedia system and avoid
endangering yourself and others.
The equipment level and functions of your multimedia system may differ depending on:
R
Model
R
Order
R
Country specification
R
Availability
Mercedes-Benz therefore reserves the right to
introduce changes in the following areas:
R
Design
R
Equipment
R
Technical features
The equipment in your vehicle may therefore
differ from that shown in the descriptions and
illustrations.
Consult an authorized Mercedes-Benz Center if
you have further questions.
The Operator's Manual and all supplements are
integral parts of the vehicle. You should always
keep it in the vehicle and pass it on to the new
owner if you sell the vehicle.
The technical documentation team at
Daimler AG wishes you safe and pleasant motoring.
Mercedes-Benz USA, LLC
Mercedes-Benz Canada, Inc.
A Daimler Company
2535845203
É2535845203EËÍ
2
Contents
Index ....................................................... 4
If you operate information systems and communication equipment integrated in the vehicle when driving, you may be distracted from
the traffic situation. You could also lose control of the vehicle. There is a risk of an accident.
Only operate this equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equipment when the vehicle is stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating the multimedia system.
The multimedia system calculates the route to
the destination without taking account of the
following, for example:
R
traffic lights
R
stop and yield signs
R
merging lanes
R
parking or stopping in a no parking/no stopping zone
R
other road and traffic rules and regulations
R
narrow bridges
The multimedia system may provide incorrect
navigation recommendations if the actual
street/traffic situation does not correspond
with the digital map's data. Digital maps do not
cover all areas nor all routes in an area. For
example, a route may have been diverted or the
direction of a one-way street may have changed.
For this reason, you must always observe road
and traffic rules and regulations during your
journey. Road and traffic rules and regulations
always have priority over the system's driving
recommendations.
Navigation announcements are intended to
direct you while driving without diverting your
attention from the road and driving.
Please always use this feature instead of consulting the map display for directions. Looking
at the icons or map display can distract you from
traffic conditions and driving, and increase the
risk of an accident.
Bear in mind that at a speed of only 30 mph
(approximately 50 km/h), your vehicle covers a
distance of 44 feet (approximately 14 m) every
second.
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled equip-
he FCC radio frequency (RF)
ment and
meets t
Exposure Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy
that is deemed to comply without maximum
permissive exposure evaluation (MPE). However, it is recommended to install it at a distance
of at least 8 inches (approx. 20 cm) between the
radiation source and a person's body (not
including limbs such as hands, wrists, feet and
legs).
WARNING
G
Modifications to electronic components, their
software as well as wiring can impair their
function and/or the function of other networked components. In particular, systems
relevant to safety could also be affected. As a
result, these may no longer function as intended and/or jeopardize the operating safety of
the vehicle. There is an increased risk of an
accident and injury.
Never tamper with the wiring as well as electronic components or their software. You
should have all work to electrical and electronic equipment carried out at a qualified
specialist workshop.
Declarations of conformity
Vehicle components which receive
and/or transmit radio waves
USA only: The wireless devices of this vehicle
comply with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) These devices may not cause interference,
and
2) These devices must accept any interference,
including interference that may cause undesired
operation of the device.
Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Introduction
15
Canada only: The wireless devices of this vehi-
cle comply with Industry Canada licenseexempt RSS standard(s). Operation is subject to
the following two conditions:
1) These devices may not cause interference,
and
2) These devices must accept any interference,
including interference that may cause undesired
operation of the device.
Correct use
You need to observe the following information
when using the multimedia system:
R
the safety notes in this manual
R
traffic rules and regulations
R
laws and safety standards pertaining to motor
vehicles
Using roof carriers may impair the correct functioning of a roof antenna (phone, satellite radio,
GPS).
Attaching metalized retrofit film to the windshield may affect radio reception. This can have
a negative impact on all other antennas (e.g.
emergency call antenna) in the vehicle interior.
Protection against theft: this device is equipped with technical provisions to protect it
against theft. Further information on protection
against theft can be obtained from an authorized Mercedes-Benz Center.
Qualified specialist workshop
Read the information on qualified specialist
workshops in the vehicle Operator's Manual.
Function restrictions
For safety reasons, some functions are restricted or unavailable while the vehicle is in motion.
You will notice this, for example, because either
you will not be able to select certain menu items
or a message will appear to this effect.
Data stored in the vehicle
Data recording
A wide range of electronic components in your
vehicle contain data memories.
These data memories temporarily or permanently store technical information about:
R
the vehicle's operating state
R
events
R
malfunctions
In general, this technical information documents the state of a component, a module, a
system or the surroundings.
These include, for example:
R
operating conditions of system components,
e.g. fluid levels
R
the vehicle's status messages and those of its
individual components, e.g. number of wheel
revolutions/speed, deceleration in movement, lateral acceleration, accelerator pedal
position
R
malfunctions and defects in important system
components, e.g. lights, brakes
R
vehicle reactions and operating conditions in
special driving situations, e.g. air bag deployment, intervention of stability control systems
R
ambient conditions, e.g. outside temperature
This data is of an exclusively technical nature
and can be used to:
R
assist in detecting and rectifying malfunctions and defects
R
analyze vehicle functions, e.g. after an accident
R
optimize vehicle function
The data cannot be used to trace the vehicle's
movements.
When your vehicle is serviced, technical information can be read from the event data memory
and fault data memory.
Services include, for example:
R
repair services
R
service processes
R
warranty events
R
quality assurance
The vehicle is read out by employees of the service network (including the manufacturer) using
special diagnostic testers. You can obtain more
information there, if required.
Z
Introduction
16
After a malfunction has been rectified, the information is deleted from the malfunction memory
or is continually overwritten.
When operating the vehicle, situations are conceivable in which this technical data, in connection with other information (if necessary, after
consultation with an authorized expert), could
be traced to a person.
Examples include:
R
accident reports
R
damage to the vehicle
R
witness statements
Further additional functions that have been contractually agreed upon with the customer allow
certain vehicle data to be conveyed by the vehicle as well. The additional functions include, for
example, vehicle location in case of an emergency.
Multimedia system/mbrace
If the vehicle is equipped with multimedia system or mbrace, additional data about the vehicle’s operation, the use of the vehicle in certain
situations, and the location of the vehicle may
be compiled through the multimedia system or
the mbrace system.
For additional information please refer to the
multimedia system User Manual and/or the
mbrace Terms and Conditions.
Event data recorders
This vehicle is equipped with an event data
recorder (EDR). The main purpose of an EDR is
to record data that will assist in understanding
how a vehicle’s systems performed in certain
crash or near crash-like situations, such as during air bag deployment or when hitting a road
obstacle. The EDR is designed to record data
related to vehicle dynamics and safety systems
for a short period of time, typically 30 seconds
or less.
The EDR in this vehicle is designed to record
such data as:
R
how various systems in your vehicle are operating
R
whether or not the driver and passenger seat
belts are fastened
R
how far (if at all) the driver is depressing the
accelerator and/or brake pedal and
R
how fast the vehicle is traveling
This data can help provide a better understanding of the circumstances in which crashes and
injuries occur. NOTE: EDR data is recorded by
your vehicle only if a non-trivial crash situation
occurs; no data is recorded by the EDR under
normal driving conditions and no personal data
(e.g., name, gender, age, and crash location) are
recorded. However, other parties, such as law
enforcement, can combine the EDR data wi
the ty
pe of personal identification data routinely
th
acquired during a crash investigation.
To read data recorded by an EDR, special equip-
ment is required, and access to the vehicle or
the EDR is needed. In addition to the vehicle
manufacturer, other parties that have the special equipment, such as law enforcement, can
read the information by accessing the vehicle or
the EDR.
EDR data may be used in civil and criminal matters as a tool in accident reconstruction, accident claims, and vehicle safety. Since the Crash
Data Retrieval CDR tool that is used to extract
data from the EDR is commercially available,
Mercedes-Benz USA, LLC (“MBUSA”) expressly
disclaims any and all liability arising from the
extraction of this information by unauthorized
Mercedes-Benz personnel.
MBUSA will not share EDR data with others
without the consent of the vehicle owners or, if
the vehicle is leased, without the consent of the
lessee. Exceptions to this representation
include responses to subpoenas by law enforcement; by federal, state or local government; in
connection with or arising out of litigation involving MBUSA or its subsidiaries and affiliates; or,
as required by law.
Warning: The EDR is a component
of the Su
pplemental Restraint System (“SRS”) Module.
Tampering with, altering, modifying or removing
the EDR component may result in a malfunction
of the SRS Module and other systems.
State laws or regulations regarding EDRs that
conflict with federal regulation are pre-empted.
This means that in the event of such conflict, the
federal regulation governs. As of February 2013,
13 states have enacted laws relating to EDRs.
Information on copyright
Information on licenses for free and Open
Source software used in your vehicle and in the
electronic components can be found on this
website: http://www.mercedes-benz.com/
opensource.
Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multimedia system, as available at the time of going
to press. Country-specific differences are possible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and functions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual.
Introduction
17
Z
Overview
18
Overview
Components
Overview and operation
:
Multimedia system display
;
Single DVD drive
=
Touchpad (for multimedia system with touchpad)
?
Controller
The multimedia system consists of:
R
the display
The display has 960 x 540 pixels
R
the single DVD drive
R
the buttons
R
the controller
R
the touchpad (for multimedia system with touchpad)
R
ports in the center console (2 x USB, SD-card slot)
®
An iPod
For the multimedia system with touchpad: the controller and touchpad provide two options for
entering characters and selecting functions.
is connected via a USB cable.
Functions
R
HD FM radio and HD AM radio/satellite
radio
R
Media
-
Media support: audio CD, MP3 CD, DVD
video, two connection options for USB or
Media Interface (e.g. iPod
®
audio, 10.8 GB Media Register on
tooth
the hard drive
-
Music search using all media
R
Sound system
®
), SD card, Blue-
You can select from two sound systems:
-
Standard sound system
-
Burmester®surround sound system
R
Navigation system
-
Navigation via the hard drive
-
Destination entry using keyword search
-
Realistic 3D map with textured city models
-
Personal POIs and routes using SD memory
card
-
Dynamic route guidance with traffic reports
via SIRIUS satellite radio
-
Additional navigation system functions,
such as Drive Information
R
Communication
-
Messaging functions (text messages,
email)
-
Address book
-
Web browser
-
Mercedes-Benz Apps with online search,
Facebook, stock prices, news and much
more
-
Mercedes-Benz Companion app
-
Mercedes-Benz Mobile Website
-
Wi-Fi interface for the connection of a
smartphone to the multimedia system
R
SIRIUS Weather
-
Weather data as an information chart (current forecast, 5-day preview, detailed information)
-
Weather data on the weather map, e.g. rain
radar data, storm characteristics and the
track of tropical cyclones (hurricanes,
typhoons)
R
Vehicle functions
-
Vehicle settings, e.g. ambient lighting
-
360° camera
-
Rear view camera
-
Climate control functions, e.g. climate
mode
-
DYNAMIC SELECT (individual drive program)
R
Favorites button
-
fast access to favorites on the controller or
on the touchpad
-
adds and edits favorites
Overview
Display
General notes
Avoid any direct contact with the display
!
surface. Pressure on the display surface may
result in impairments to the display, which
could be irreversible.
Wearing polarized sunglasses may impair your
ability to read the display.
The display has an automatic temperature-controlled switch-off feature. The brightness is
automatically reduced if the temperature is too
high. The display may then temporarily switch
off completely.
Overview
:
Status bar with displays
;
Cover view (if available)
=
Main display field
?
Climate control status display
The example shows media playback in SD card
mode.
Cleaning instructions
Do not touch the display. The display has a
!
very sensitive high-gloss surface; there is a
risk of scratching. If you have to clean the
screen, however, use a mild cleaning agent
and a soft, lint-free cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a commercially available microfiber cloth and cleaning
agent for TFT and LCD displays. Do not apply
pressure to the display surface when cleaning it,
as this could cause irreversible damage to the
display. Then, dry the surface with a dry microfiber cloth.
19
Overview and operation
Overview
20
Avoid using alcoholic thinners, gasoline or abrasive cleaning agents. These could damage the
display surface.
Buttons and controller
Overview
Overview and operation
Example: buttons and controller with touchpad
:
Navigation button
;
Radio button
=
Media button
?
Telephone and address book button
A
Vehicle and system settings button
B
Back button
C
Favorites button
D
Adjusts the volume or mutes
E
Switches the multimedia system on/off
F
Controller
For Mercedes-AMG vehicles with a switchable AMG Performance exhaust system:
D
E
R
Turning: adjusts the volume
R
Pressing: switches the multimedia system on/off
Adjusts the volume of the AMG Performance exhaust system (see the vehicle
Operator's Manual)
Back button
You can use the % button to exit a menu or to
call up the display of the current operating
mode.
X
To exit the menu: briefly press the %
button.
The multimedia system changes to the next
higher menu level in the current operating
mode.
X
To call up the highest level menu: press the
% button for longer than two seconds.
Controller
The controller in the center console lets you:
R
select menu items on the display
R
enter characters
R
select a destination on the map
R
save entries
The controller can be:
R
turned 3
R
slid left or right 1
R
slid forwards or back 4
R
slid diagonally 2
R
pressed briefly or pressed and held7
Favorites button
With the favorites button, you can select, add or
edit favorites.
X
Press the favorites button on the controller.
The favorites are displayed.
X
To select a favorite: turn and press the controller.
X
Press the controller.
Other functions (Y page 32).
Touchpad
Multimedia system with touchpad: alternatively,
you can use the touchpad to select and enter
information (
Y page 22).
Overview
Multifunction steering wheel
:
Multifunction display
;
Right control panel
=
Left control panel
Left control panel
ò
9
:
9
:
R
Calls up the main menu
Press briefly:
R
Scrolls in lists
R
Selects a menu or function
R
In the Radio/Media menu: opens
the track or station list and selects
a station, an audio track or a video
scene
R
In the Telephone menu: switches
to the phone book and selects a
name or a telephone number
Press and hold:
R
Scrolls quickly through all lists
R
In the Radio/Media menu: selects
a station, audio track or video
scene using rapid scrolling
R
In the Telephone menu: starts
rapid scrolling if the phone book is
open
21
Overview and operation
22
Touchpad
a
R
In all menus: confirms the selected
entry in the list
R
In the Radio/Media menu: opens
the list of available radio sources
and media
R
In the Telephone menu: switches
to the phone book and starts dialing the selected number
ñ
Switches off the Voice Control System (see the separate operating
instructions)
%
Overview and operation
Press briefly:
R
Back
R
In the Radio/Media menu: deselects the track, station list or list of
available radio sources and media
R
Hides display messages
R
Exits the telephone book/redial
memory
%
Press and hold:
R
Calls up the standard display in the
Trip
Right control panel
~
R
Rejects or ends a call
R
Exits the telephone book/redial
memory
6
W
R
Makes or accepts a call
R
Switches to the redial memory
R
Adjusts the volume
X
8
ó
R
Mute
Switches on the Voice Control System (see the separate operating
instructions)
menu
:
Touch-sensitive surface
;
Favorites button
=
Calls up quick access for audio
?
Back button
Using the touchpad, you can:
R
select menu items (Y page 23)
R
enter characters (handwriting recognition)
Y page 25)
(
R
control the active audio source
Y page 27)
(
R
create, manage and call up favorites
Y page 32)
(
R
enter destinations in the navigation system
R
save entries
Further information on operating the touchpad
Y page 23).
(
Switching the touchpad on/off
X
Press the Ø button.
The vehicle menu is displayed.
X
To select System Settings: slide 6, turn
and press the controller.
A menu appears.
X
To select Touchpad: turn and press the controller.
X
Select Activate Touchpad.
The touchpad is switched on O or off ª.
Touchpad
Touchpad overview
Do not use any sharp objects on the touch-
!
pad. This could damage the touchpad.
Touchpad
23
Operating the touchpad
Selecting a menu item
X
Use one finger to touch the touch-sensitive
surface.
X
Swipe your finger up, down, to the left or right.
The selection in the display moves in accordance with the direction of movement. You can
navigate in lists or menus in this way.
Confirming a selection
Calling up quick access for audio
X
Use two fingers to touch the lower part of the
touch-sensitive surface.
X
Swipe your fingers up.
Quick access is displayed.
Further information on quick access for audio
Y page 27).
(
Hiding quick access for audio
Overview and operation
Do not press your finger too hard on the touchpad. This could cause malfunctions.
X
Use one finger to press the touch-sensitive
surface until you reach the pressure point.
A menu, an option or an application is started.
X
Use two fingers to touch the touch-sensitive
surface.
X
Swipe your fingers down.
Quick access is hidden.
Operating the control for vehicle and
sound settings
Touchpad
24
X
Touch the touch-sensitive surface with two
fingers, spaced slightly apart.
X
Turn both fingers clockwise.
The control setting is increased.
or
X
Turn both fingers counter-clockwise.
The control setting is decreased.
Moving the map
Overview and operation
X
Use one finger to press the touch-sensitive
surface until you reach the pressure point.
The crosshair is shown.
Zooming in on the map
X
Touch the touch-sensitive surface with two
fingers, spaced slightly apart.
X
Glide your fingers away from each other.
The map scale is magnified.
Zooming out of the map
X
Touch the touch-sensitive surface again with
one finger.
X
Swipe your finger in any direction.
The map is moved is the direction of movement.
X
Touch the touch-sensitive surface with two
fingers, spaced far apart.
X
Glide your fingers towards each other.
The map scale is reduced.
Touchpad
25
Handwriting recognition
Handwriting recognition overview
:
Active input line
;
Inserts a space (Y page 25)
=
Illustration of the touch-sensitive surface
?
Deletes characters (Y page 25)
You can use handwriting recognition for text,
numbers or characters in any input line.
If the character that you have entered can be
interpreted in different ways, these options are
displayed. More information on the character
suggestions (
You can additionally switch the handwriting recognition read-aloud function on and off.
Y page 25).
Switching the text reader function of
the handwriting recognition on/off
You can switch the text reader function of the
handwriting recognition on or off.
X
Press the Ø button.
The vehicle menu is displayed.
X
To select System Settings: slide 6, turn
and press the controller.
A menu appears.
X
To select Touchpad: turn and press the controller.
X
To select Read Out Handwriting Recog‐
nition: turn and press the controller.
The text reader function is switched on O or
off ª.
Entering characters
Requirement: an input line for text, numbers or
characters has been selected.
X
Use one finger to draw the desired character
on the touch-sensitive surface.
The character recognized is entered in the
input line. You can draw the next character on
the touch-sensitive surface.
If the character can be interpreted in different
ways, these options are displayed.
More information on the character suggestions
Y page 25).
(
Overview and operation
:
To exit the menu
;
To return to handwriting recognition
=
To use the phone book or text templates
?
To change the input line or the position of
the cursor
A
To change the input language
B
To finish character entry
X
To display the menu: press the touchpad.
Character suggestions
X
To select a character suggestion: turn the
controller.
The selected character is entered instead of
the automatically recognized character. Character entry can be continued.
Inserting a space
Requirement: an input line for text, numbers or
characters has been selected.
X
Use your finger to touch the touch-sensitive
surface and swipe to the right.
A space is entered into the input line.
Deleting characters
Requirement: an input line for text, numbers or
characters has been selected.
26
Touchpad
X
Use your finger to touch the touch-sensitive
surface and swipe to the left.
The character last entered is deleted.
Switching input lines
Overview and operation
X
Press the touchpad.
A symbol is shown.
X
To select p: swipe your finger to the left or
right and press.
X
To select the input line: swipe up or down and
press.
The selected input line is active and character
entry can be continued.
Moving the cursor within the input line
X
Press the touchpad.
A symbol is shown.
X
To select p: glide your finger to the left or
right and press.
X
To move the cursor: glide to the left or right.
X
Press the touchpad.
A symbol is shown.
X
To select B: swipe your finger to the left or
right and press.
The list of available input languages appears.
X
To select a language: swipe up or down and
press.
The input language for handwriting recognition has been changed.
Searching in lists
The phone book search is used as an example.
You determine the first letter of the contact you
are looking for with the first character you enter.
X
Draw the letter on the touchpad surface.
The first contact with the selected first character is highlighted in the phone book.
Further information on handwriting recognition on the touchpad (
X
Draw additional letters on the touchpad sur-
Y page 25).
face one after another.
To complete the search and return to the
X
phone book: press the touchpad.
Switching between the controller and
the touchpad as input device
Requirement: an input line for text, numbers or
characters has been selected.
To switch from character entry using the
X
controller to handwriting recognition on
the touchpad: use one finger to press the
touchpad.
Handwriting recognition on the touchpad is
active.
To switch from handwriting recognition
X
on the touchpad to character entry using
the controller: press the controller.
Character entry using the controller is active.
Changing the input language for handwriting recognition
Requirement: an input line for text, numbers or
characters has been selected.
Basic functions
27
Quick access for audio
Depending on the audio source that is currently
activated, you can use this function to select the
next station or music track.
X
Call up quick access (Y page 23).
The current audio source is displayed.
X
To select the previous or next station or music
track: swipe to the left or right.
The selected station or music track is played.
Basic functions
Switching the multimedia system on/
off
X
Press the Ü button on the center console
to the right of the controller.
The multimedia system calls up the previously
selected menu.
If you switch the multimedia system off, playback of the current media source will also be
switched off.
Adjusts the volume
Adjusting the volume for media sources
X
Turn the thumbwheel to the right of the controller.
or
X
Press the W or X button on the multifunction steering wheel.
The volume of the media source currently
selected changes.
Adjusting the volume for traffic
announcements and navigation
announcements
During traffic or navigation announcements:
X
Turn the thumbwheel to the right of the controller.
or
X
Press the W or X button on the multifunction steering wheel.
You can set the volume for navigation
i
announcements to be different from the volume of the respective media source.
Adjusting the volume for phone calls
You can adjust the volume for hands-free mode
during a telephone call.
X
Turn the thumbwheel to the right of the controller.
or
X
Press the W or X button on the multifunction steering wheel.
Setting the volume for the Voice Control
i
System voice output; see the separate operating instructions.
Switching the sound on or off
Media source sound
X
Press the thumbwheel to the right of the controller.
or
X
Press the 8 button on the multifunction
steering wheel.
If the audio output is switched off, the status
i
line will show the 8 symbol. If you switch
the media source or change the volume, the
sound is automatically switched on.
Even if the sound is switched off, you will still
i
hear navigation system announcements.
Overview and operation
Basic functions
28
Switching navigation announcements
off and on again
To switch off navigation announcements:
X
press the thumbwheel to the right of the controller during the announcement.
The Spoken driving recommendations
have been deactivated. message
appears.
To switch navigation announcements on
X
again: switch the multimedia system off and
then on again (
Y page 27).
or
X
Start a new route calculation (Y page 58).
or
X
While route guidance is active, show the
Overview and operation
menu and select +(
Y page 73).
Basic menu displays
X
Press the Õ button or the ß, $,
%, or Ø button.
Navigation: the map displays the current
vehicle position.
Radio: the display of the radio mode last set
appears.
Media: the display for the media source last
set appears. In the example, SD card mode is
set.
Telephone: the display for the telephone
menu appears.
Vehicle functions: the vehicle functions display appears.
X
To show the menu: slide 4 the controller.
The menu for the selected functions appears.
Depending on the operation, the marking is
shown in main function bar : or menu
bar ;.
X
To select a menu item: turn and press the
controller.
Once you have selected a menu item in :,
the last menu set for the selected function
appears.
Menu bar ; offers options in the current
media mode.
Selecting the operating mode for a
main function
You can select the available operating modes for
the main functions, e.g. telephone.
In the telephone menu, you can:
R
switch to telephone mode
R
call up the address book
R
call up the Digital Operator's Manual for the
telephone
X
Press the % button.
If telephone mode was the last mode selected, the telephone menu appears.
Loading...
+ 140 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.