Non-means of transport are not allowed to drive on the road
The manual contains important information, please keep it safe for future reference.
In order to improve the product and improve the quality, we may change parts of the product
structure, appearance, packaging, and assembly methods without notice. When there is a
difference between the specification and the object, please take the physical object as the
standard, please understand!
Thank you for buying children's electric vehicle licensed by the Mercedes Benz brand !
One of the most important things to do before use is to read this product manual carefully, which can tell
you the details of the installation program and the correct method of use. It can also guide you to avoid improper
operation to damage the product or hurt the rider. It's especially important that it tells you a lot about security
considerations. Please memorize these contents and guide your child to use them. Please keep this instruction in
good hands and keep it in easy access.
About product 1
" Mercedes Benz" The design of the product are protected by Daimler's
intellectual property rights, Our company is authorized to use these
trademarks.
Parameter specification:
Battery
Charger 6V 500mA OR 12V 700mA
6V4.5Ah*1 OR 12V4.5Ah*1
Applicable age: 36-72 months
Load limit: Less than 25 kg
Speed : Single drive 2.5 km / h Double drive 2.5-4.5 km / h
Dimension: 1080X670X460 mm
Power supply mode: Charging type
Charging interval: 8--12 hour
Battery life: About 300 recharges
Product name: Electric car
Part
number
1
2
3
4
5
Part name Number Standby note
car body 1
windshield 1
support 1
seat
1 belt with safety belt
steering wheel 1
Screw rod with 5X35mm original
machine
6
reflector 2
“ L”X1 “R”X1
7
8
9
10
11
12
13
wheel 4
wheel cap
4 Installed on wheels
Plastic wrench 2
charger
1
1
ejector
1 L=200mm
MP3 line
training wheel
2
Ø8 nuts for fixing the front and
rear wheels
The two auxiliary wheels are the
same.
Instructions
14
15
Shaft cover
1
4
Parts list 2
Exploded view 3
Prior to installation 4
Warning !
It contains fine parts and is not suitable for children under 36 months.
The product may contain a potentially dangerous sharp edge or sharp tip prior to assembly,
so this product must be assembled from the adult!
Please put the packing bag in time to avoid the suffocation due to the play of the baby! After
the assembly is complete, take all the tools and the spare parts to be properly stored, and
do not let the children touch!
Please check the number of all components before installation. Please handle the packing
plastic bag and protective film of the product. It is forbidden for children to play and have
the risk of suffocation.
Before charging, check whether the wire, plug, housing and other parts of the charger are
damaged. If any damage is found, stop using it until the repair is in good condition.
Battery Safety Warning
The non-rechargeable battery can not be charged;
the rechargeable battery can only be charged under the supervision of the adult;
Rechargeable batteries should be removed from toys before charging;
Different types of batteries or new and old batteries can not be mixed;
Batteries should be placed with correct polarity;
The exhausted battery should be removed from the toy;
The power terminal shall not be short-circuited;
The product does not provide dry battery;
Mounting front and rear wheels 5
Install front wheel
front axles are fixed with the
front axle, and then the front
wheels are installed, then the
front wheels are placed, and
then the front wheels are fixed
with a M8 nut. Finally, the wheel
core cover is placed on the front
axle.
:
The
[Note: same installation
method for left and right
front wheels]
Install rear wheel::The drive motor has been installed on the car body, directly installing the rear
wheel, placing an additional
10 gasket, and then fixing
with a M8 nut, finally, placing
the wheel core cover; [Note:
The right and left front
wheel installation methods
are the same]
Install seat and rear wing
6
Install the seat:
first plug the card
post at the rear end of the seat on the
vehicle body, and then fix with 2pcs
Ø 4X12 self-tapping screw.[Remarks:
Connect the plug-in plug-in in the
battery room before installing the seat,
and turn on the power supply; see the
connection power supply 9 for details.]
Install the rear wing
: align
the card slot on the vehicle body,
press down the tail, and get stuck.
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.