Memorex MP3115 User Manual

MP3115

User’s Guide

Portable CD Player with

AM/FM Stereo Radio

Before operating this product,

please read these instructions completely.

Dear Customer,

Please read this manual thoroughly before operating the unit to become more familiar with it
and obtain the performance that will bring you continued enjoyment for many years. Keep
these instructions handy for future reference.

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU
NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.

For future reference, record the serial number of the unit printed on the rear of the cabinet.

Serial Number _______________________________________

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This Caution Marking is located at the bottom enclosure of the unit.

DANGEROUS VOLTAGE:

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION:

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.

DANGER:

This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player
is equipped with safety switches to avoid exposure when the CD door is open and the safe­ty interlocks are defeated. Invisible and hazardous laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam. Please do not attempt to defeat or bypass
the safety switches.

FCC WARNING:

This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or
modification is made.

1

SAFETY PRECAUTIONS

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

LASER SAFETY: This unit employs a laser. Only qualified service personnel

should attempt to service this device due to possible eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE

PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and
power surges ARE NOT covered under warranty for this product.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES
ET POUSSER JUSQU’AU FOND.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

2

Dear Customer:

A

S

S

O

C

I

A

T

I

O

N

EST. 1924

E

L

E

C

T

R

O

N

I

C

I

N

D

U

S

T

R

I

E

S

EIA

We

LISTENING

For A Lifetime

Want You

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equip­ment by playing it at a safe level. One that lets the sound come through loud and clear
without annoying blaring or distortion and, most importantly, without affecting your sensi­tive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes
of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without dis­tortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.

Decibel

Level Example

30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:

90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

3

SAFETY INSTRUCTIONS

Before using the unit, be sure to read all operating instructions carefully. Please note that these are

eneral precautions and may not pertain to your unit. For example, this unit may not have the capabili-

g
ty to be connected to an outdoor antenna.

1. READ INSTRUCTIONS

ll the safety and operating instructions should be read before the product is operated.

A

. RETAIN INSTRUCTIONS

2

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.

6. ATTACHMENTS

Do not use attachments not recommended by the product's manufacturer as they may cause hazards.

7. WATER AND MOISTURE

Do not use this product near water–for example: near a bathtub, washbowl, kitchen sink or laundry tub; in
a wet basement; or near a swimming pool.

8. ACCESSORIES

Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table rec­ommended by the manufacturer or sold with the product. Any mounting of the product
should follow the manufacturer’s instructions, and should use a mounting accessory rec­ommended by the manufacturer.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive

force and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet and in the back or bottom are provided for ventilation,
to ensure reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near
or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been
adhered to.

10. POWER SOURCES

This product should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power com­pany. For products intended to operate from battery power, or other sources, refer to the operating instruc­tions.

11. GROUNDING OR POLARIZATION

This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your elec­trician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the
appliance.

13. LIGHTNING

To protect your product from a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power-line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as con­tact with them might be fatal.

4

SAFETY INSTRUCTIONS (CONTINUED)

15. OVERLOADING

o not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

D

16. OBJECT AND LIQUID ENTRY

Never push objects of any kind into this product through openings as they may touch dangerous voltage points

r short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.

o

7. OUTDOOR ANTENNA GROUNDING

1

If an outside antenna is connected to the product, be sure the antenna system is grounded so as to pro­vide some protection against voltage surges and built-up static charges. Section 810 of the National
Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and sup­porting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conduc­tors, location of antenna discharge product, connection to grounding electrodes and requirements for
grounding electrodes.

18. SERVICING

Do not attempt to service this
product yourself as opening or
removing covers may expose you
to dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.

19. REPLACEMENT PARTS

When replacement parts are
required, be sure the service tech­nician uses replacement parts
specified by the manufacturer or
those that have the same charac­teristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or
other hazards.

20. SAFETY CHECK

Upon completion of any service
or repairs to this product, ask the service technician to perform safety checks to determine that the product
is in proper operating condition.

21. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE

Unplug the product from the wall outlet and refer servicing to qualified service personnel under the follow­ing conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance–this

indicates a need for service.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves or other
products (including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular
nected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

, specifies that the cable ground shall be con-

5

LOCATION OF CONTROLS

1. VOLUME Control

2. BASS BOOST Button

3. STOP (

■) Button

4. POWER ON Indicator

5. Display

6. BASS BOOST Indicator

7. Left Speaker

8. Skip/Search ( ) Button

9. PROG (Program) Button

10. REPEAT Button

11. Battery Compartment
(Bottom of Unit)

12. FM Antenna

13. CD Compartment

14. Carrying Handle

15. CD OPEN/CLOSE Area

16. TUNING Control

17. AM/FM Dial Scale

18. FM STEREO Indicator

19. PLAY/PAUSE (

®/p) Button

20. PLAY/PROG (Program) Indicator

21. Function Switch (CD/POWER
OFF/FM/AM)

22. REPEAT Indicator

23. AC Jack (Rear of Unit)

24. Headphone Jack (Rear of
Unit)

25. Skip/Search ( ) Button

26. Right Speaker

6

POWER SOURCES

AC Plug

AC Outlet

This unit is designed to operate on AC household current or DC (batteries).

AC

Use the AC polarized line cord included with the unit for operation on AC power.
Insert one end of the AC line cord into the AC jack on the rear of the unit and the
other end (with the 2 blades) into a conveniently
located AC outlet having 120V, 60Hz. When the
AC cord is plugged in, the batteries will be discon­nected.
NOTE: The AC plug supplied with the unit is polar­ized to help minimize the possibility of electric
shock. If the AC plug does not fit into a nonpolar­ized AC outlet, do not file or cut the wide blade. It is the user’s responsibility to have
an electrician replace the obsolete outlet.

BATTERY INSTALLATION

To use this unit with battery power, remove the
Battery Compartment door on the bottom of the
unit by sliding it off. Insert eight (8) ‘C’ size
batteries following the diagram in the
compartment.

NOTE: The AC power cord must be disconnected
from the AC jack on the rear of the unit in order for
the unit to operate on battery power.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries
with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)

HEADPHONE JACK

For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones
(not included) to this jack.
headphone plug is inserted in the jack.

The speakers are automatically disconnected when the

7

OPERATION

2

1

LISTENING TO THE RADIO

1

Slide the Function switch to the AM or
FM position to turn the unit on and
select AM or FM; the POWER ON
indicator will light.

3

Adjust the VOLUME control 1 and
BASS BOOST button 2 as desired.
Press the BASS BOOST button 2 to
the “in” position to enhance the bass
sound; the BASS BOOST indicator
will light.

2

Tune a desired station by turning the
TUNING control.
The frequencies are located on the
AM/FM dial scale. If an FM Stereo sta­tion is broadcasting, the FM Stereo
indicator will light.

4

To turn the radio off, slide the Function
switch to the POWER OFF position.

ANTENNAS

–This unit has a built-in ferrite rod antenna, which provides adequate reception in most

AM

areas. If reception is weak, turn the unit to improve reception.
FM–The FM Antenna is for FM reception only. If reception is weak, adjust the length and the
angle of the antenna.

8

2

1

3

2

1

2

1

TO PLAY A CD

OPERATION (CONTINUED)

1

Slide the Function switch to the CD
position to turn the unit on and select
CD mode; the POWER ON indicator
will light.

3

To play a disc from the beginning, press the

PLAY/PAUSE (®/p) button; the PLAY/PROG
indicator will light.
Press the PLAY/PAUSE (®/p) button again to
pause playback; the track number will blink and
the PLAY/PROG indicator will turn off. Press the
PLAY/PAUSE (®/p) button once again to contin­ue playback; the track number will stop blinking
and the PLAY/PROG indicator will light.

2

Open the CD Compartment door by
pressing the OPEN/CLOSE area. Place
a CD on the center spindle, with the
printed label side facing up. Close the
CD Compartment door; the total tracks
will appear in the display.

4

To start from a specific track,

while in the stop mode, locate the

track using the Skip/Search o 1 or n 2
button, then, within five seconds, press
the PLAY/PAUSE (
playback from the track selected. The
PLAY/PROG indicator will light.

®/p) button 3 to start

5

Adjust the VOLUME control 1 and
BASS BOOST button

Press the BASS BOOST button
the “in” position to enhance the bass
sound; the BASS BOOST indicator
will light.

2 as desired.

2 to

CONTINUED ON THE NEXT PAGE

6

To skip forward or backward through the tracks
on the disc, press the Skip/Search
button.

search forward or backward through the play-

To
ing track, press and hold the Skip/Search
n 2 button; a chattering noise will be heard. Stop
pressing the button to return to normal playback.

9

o 1 or n 2

o 1 or

OPERATION (CONTINUED)

1

2

3

4

1

2

TO PLAY A CD (CONTINUED)

7

When the disc is through playing, it will
stop rotating. Press the STOP (■) but­ton to stop the disc before it is finished.

NOTES:

• If there is no disc or a disc is inserted incorrectly, dirty or damaged, "Er" or "no" will
appear in the display.

• As each track is played, the track number is shown in the display.

• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait
for the disc to stop before opening the CD door. Never touch the lens when the CD
door is open.

• DO NOT use the carrying handle when playing a CD. The CD should only be used
on a steady surface.

TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS

1

8

To turn the unit off, slide the Function
switch to the POWER OFF position.

2

To repeat a single track, press the REPEAT

button 1 once while in the Stop mode; the
Repeat indicator will blink. Press the
Skip/Search
specific track that you wish to repeat. When
the desired track number appears in the
display, within five seconds, press the
PLAY/PAUSE (
playback. The PLAY/PROG indicator will light
and the specific track you selected will be
repeated continuously.

To cancel Repeat playback, press the STOP (■) button twice.

o 2 or n 3 button to select the

®/p) button 4 to begin

To repeat all of the tracks on a disc
continuously, press the REPEAT

1 twice while in the Stop mode;

button
the Repeat indicator will light. Press the

Y/PAUSE (

PLA
playback. The PLAY/PROG indicator
will light and all tracks will be repeated
continuously.

10

®/p) button 2 to begin

OPERATION (CONTINUED)

2

1

2

1

TO PROGRAM THE MEMORY (UP TO 20 TRACKS)

1

Slide the Function switch to the CD
position to turn the unit on and select
CD mode; the POWER ON indicator
will light. Insert a CD as described on
page 9.

3

Use the Skip/Search o 1 or n 2 but­ton to select the first track to be pro­grammed.

2

Press the PROGRAM button; “01” on
the display and the PLAY/PROG indi­cator will blink.

4

Press the PROGRAM button again;
the selected track has now been pro­grammed and counted as program 1.

5

Repeat steps 3 and 4 to program the other
desired tracks in sequence.
When the program memory is full, the unit
will run through the programmed tracks in
the display and then revert to “01”.

6

Press the PLAY/PAUSE (®/p) button to
begin Programmed playback; the
PLAY/PROG indicator will blink and the
tracks will play in the order programmed.

SEE NEXT PAGES FOR NOTES ON PROGRAMMED PLAY

11

OPERATION (CONTINUED)

NOTES ON PROGRAMMED PLAY:

• Programming is the ability to preselect the order in which a series of tracks
will be played.

• Each track may be stored in the program memory as many times as desired.

• As each track is played, its track number will be displayed. You can move for­ward or backward through the programmed tracks with the Skip/Search
n button.

• The CD player will stop after all programmed tracks have been played or the
STOP (■) button is pressed.

• The Program memory will be cleared when the STOP (
twice, the unit is turned off or changed to another mode or when the CD door
is opened.

• To check the program, while in the Stop mode, press the PROGRAM button
and the unit will run through the programmed tracks in the display and then
revert to “01”.

PROGRAMMED REPEAT

■) button is pressed

o or

1

It is also possible to use the Program and
Repeat functions together to repeat a
specific program indefinitely. First,
program the tracks you wish to hear in the
order you wish to hear them, as described
on page 11. Then, press the REPEAT

button twice. The PLAY/PROG indicator will

blink and the REPEAT indicator will light.

NOTE:

Program Repeat operation will continue indefinitely until you press the STOP (■)
button. Press the STOP (

■) button again to cancel both Program and Repeat.

2

Press the PLAY/PAUSE (®/p) button
to begin Programmed Repeat
playback; the PLAY/PROG indicator
will continue to blink and the REPEAT
indicator will light. The player will play
the tracks you selected in the order in
which you programmed them. When
the last track in the program has been
played, the entire program will begin
again.

12

CARE AND MAINTENANCE

Caring for Compact Discs

• Treat the compact disc carefully. Handle the com­pact disc only by its edges. Never allow your
fingers to come in contact with the shiny, unprint­ed side of the compact disc.

• Do not attach adhesive tape, stickers, etc. to
the disc label.

• Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use deter­gents or abrasive cleaners to clean the compact disc. If necessary, use a CD clean­ing kit.

• If a disc skips or gets stuck on a sec­tion of the compact disc, it is probably
dirty or damaged (scratched).

• When cleaning the compact disc,
wipe in straight lines from the center
of the compact disc to the outer edge
of the compact disc. Never wipe in
circular motions.

• This unit is designed to play only compact discs bearing the identifica­tion logo as shown here. Other discs may not conform to the CD stan­dard and may not play properly.

• Compact discs should be stored in their cases after each use to avoid damage.

• Do not expose compact discs to direct sunlight, high humidity, high temperatures or
dust, etc. Prolonged exposure or extreme temperatures can warp the compact disc.

• Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink, may damage the surface.

Cleaning the Unit

• To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.

• The finish on your unit may be cleaned with a dust cloth and cared for as other fur­niture. Use caution when cleaning and wiping the plastic parts.

• Mild soap and a damp cloth may be used on the front panel.

13

TROUBLESHOOTING GUIDE

If you experience a problem with this unit, check the chart below before calling for
service.

SYMPTOM CAUSE SOLUTION

Unit will not AC cord not Check AC cord
turn on. connected. connection.
Disc will not play. CD Compartment Close CD Compartment

door not closed. door.
Disc inserted Reinsert disc correctly.
incorrectly.
Dirty or defective CD. Try another disc.
Moisture Wipe disc with soft cloth.
condensation on disc.

No sound. VOLUME control Increase volume.

set to minimum.
Defective disc. Try another disc.

Erratic playback. Dirty or defective Clean or replace disc.

disc.

AM or FM, no sound. Power is not on. Slide the FUNCTION

switch to AM or FM.

Volume set too low. Increase volume.

AM/FM, poor sound. Station is not tuned Retune the AM or FM

properly. broadcast station.
FM: Antenna is not Reorient FM
properly adjusted. antenna.

AM: Unit is not pos- Rotate unit until best
itioned correctly. reception is obtained.

14

SPECIFICATIONS

GENERAL:

Power Source ..............................................................................120V, 60Hz AC

Battery...........................................................DC 12V, 8 x 1.5V ‘C’ size batteries

Alkaline is recommended for longer life

Speaker.....................................................................................................2 x 2W

Output Power .........................................................................................2 x 1.2W

Dimensions ......................................................11.3 (W) x 9 (D) x 5.5 (H) Inches

Weight..........................................................................................................4 Lbs

RADIO SECTION:

Frequency Range (FM)....................................................................88–108 MHz

Frequency Range (AM) ................................................................530–1710 kHz

CD SECTION:

Disc Diameter ...............................................................................4.72" (120mm)

3.15" (80mm) Single CD

Optical Source....................................................................Semiconductor Laser

Specifications are subject to change without notice.

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CON­TACT CUSTOMER SERVICE AT [phone].

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN
CASE YOU NEED T
PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT
1-800-321-6993.

O RETURN THIS PRODUCT TO YOUR PLACE OF

15

Memcorp, Inc.

eston, FL

W

Printed in Hong Kong

Visit our website at www

.memorexelectronics.com