Mellerware Voyager 23101 Instructions Manual

2 year guarantee

Voyager Travel Iron

Model:
23101

1000W

PLEASE READ ALL INSTRUCTIONS BEFORE USE

MW_CO23101 Voyager_IM.indd 1MW_CO23101 Voyager_IM.indd 1 3/6/2009 9:30:18 AM3/6/2009 9:30:18 AM

IRONING TEMPERATURES

WARNING! Always check the label on the article to be ironed for correct ironing instructions!

• Sort the laundry separating different fabric types – wool with wool and cotton with cotton etc. Start
ironing the fabrics requiring the lowest temperatures (synthetics) first and progress to a higher
temperatures as the iron heats up quicker than it cools. If the fabric to be ironed has various fiber
materials (e.g. cotton with polyester), use the lower/lowest ironing temperature.

X

KIND OF TEXTILE

Synthetic

Synthetic

Wool

FIBRE MATERIAL

Acrylic

Modacryl

Polypropylene

Polyurethane

Acetate

Triacetate

Synthetic

Silk

Metallized

Cupro

Polyamide (Nylon)

Polyester

Modal

Viscose (Rayon)

Silk

Wool

Cotton

Linen

Cotton

Linen

TEMPERATURE

KNOB POSITION

LABEL

NOTE:

On label means: THIS ARTICLE CANNOT BE IRONED!
(eg: Chlorofibre, Elastodiene)

MW_CO23101 Voyager_IM.indd 2MW_CO23101 Voyager_IM.indd 2 3/6/2009 9:30:19 AM3/6/2009 9:30:19 AM

Description

1 Filling apeture for water tank
2 Revolving handle
3 Spray / Vapour jet knob
4 Revolving handle lock
5 Temperature regulator
6 Control lamp
7 Voltage changeover switch
8 Spray nozzle

CHARACTERISTIC

Temperature Dial Knob

Power Indicator Light

Soleplate

Water Filling Aperture

Transparent Water Tank

Dry/Steam Iron Selector

Spray Button

Voltage changeover

switch

FUNCTION

Adjust temperature according to fabric to be ironed.(see table below)

Indicator light will go off when desired temperature is reached. The light will go on

and off as the temperature is regulated by the adjustable thermostat.

Super smooth non stick ironing surface. If ironing surface is sticky ensure

temperature setting is correct as per table below and item being ironed is clean.

Using the measuring cup only, fill the tank with clean water here. Use demineralized

water in hard water areas or water with lime scale.

Do not overfill. Water level in tank is easily visible during ironing.

Choose desired level of steam or dry ironing by sliding the knob

Depress for spraying water onto fabric for dry ironing or when required.

Use this switch to change between 115V or 230V

KEY and CHARACTERISTICS

1

2

3

4

5

6

7

8

Dry/Steam selector knob Voltage changeover switch

MW_CO23101 Voyager_IM.indd 3MW_CO23101 Voyager_IM.indd 3 3/6/2009 9:30:19 AM3/6/2009 9:30:19 AM