PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 year guarantee
PROGLIDE STEAM IRON
Model:
23600A
2400W
max
complies with
INTERNATIONAL
IEC60335
SAFETY SPECIFICATIONS
23600A_IM.indd 1 2012/05/22 11:28:59 AM
Dear Customer,
Thank you for purchasing a MELLERWARE household appliance. Its technology, design, and functional-
ity, along with complying to the strictest quality standards, will be a source of satisfaction for a long time
to come. Please read this instruction manual carefully and familiarize yourself with your new steam iron.
Please retain this manual for future reference.
Parts Description:
A. Spray nozzle
B. Water filling inlet
C. Variable steam control
D. Burst of steam button
E. Spray button
F. Soft touch grip
G. Temperature control dial
H. Power cord protector
I. Water tank
J. Ceramic soleplate
K. Self-cleaning button
A
C
D
E
F
G
H
I
J
K
B
23600A_IM.indd 2 2012/05/22 11:28:59 AM
-
-
IMPORTANT SAFEGUARDS:
When using your iron, basic safety precautions
should always be followed:
• Make sure the voltage used corresponds with
that indicated on the rating label.
• Use the iron only as described in this instruc-
tion manual.
Close supervision is necessary when any appli-
ance is used near children. Do not leave iron unat-
tended while plugged in or on an ironing board.
Burns can occur from touching hot metal parts, hot
water or steam.
• This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.”
• The iron should never be left unattended
while it is connected to the wall socket.
• Unplug the iron from the wall socket before:
1) Cleaning
2) Filling with water or emptying the water
tank
3) Immediately after use
• Never operate the iron with a damaged power
cord or plug, or if it is damaged in any way. To
avoid the risk of electric shock, do not disas-
semble the iron. Take it to your nearest ap-
proved service centre for repair.
• Do not let the power cord touch hot surfaces.
• To protect against electric shock, do not im-
merse the iron in water or any other liquid.
• The iron must be used and rested on a stable
surface.
• Do not use the iron if there are visible signs of
damage or if it is leaking.
BEFORE FIRST USE:
• It is normal for a small amount of smoke to be
released on first use, this will quickly disap-
pear.
• When using the steam function for the first
time, do not direct the steam towards the
laundry, as there could be debris from the
steam vents.
Filling with water:
• Make sure that both the variable steam con-
trol and temperature control dial are in the
“OFF” position.
• Hold the iron upright so that the water-filling
inlet is in a horizontal position.
• Pour water through the water filling inlet until
the water reaches the “MAX” mark indicated
on the side of the iron, and never fill above
this mark.
Setting the temperature:
Follow the ironing instructions on the garment la-
bel. If there are no instructions but you do know
the kind of fabric, please consult the table below.
Note: If the fabric consists of various kinds of fab-
rics, always select the temperature required by the
most delicate fabric.
Steam ironing:
• Place the iron in a vertical position and set the
temperature control dial to the “MIN“ heat set-
ting.
• Insert the plug into the wall socket, and then
turn the temperature control dial to the “MAX”
heat setting. The pilot light will illuminate, indi-
cating that the iron is heating up.
• When the pilot light switches off, the selected
temperature has been reached and the iron is
ready to use.
• During ironing, the pilot light will switch on/off
automatically as the thermostat maintains the
selected temperature.
• Turn the variable steam control to the desired
position.
FABRIC TEMP. CONTROL TEMP. REQUIREMENT
Synthetic • Low temperature
Silk, wool •• Medium temperature
Cotton, linen ••• High temperature
23600A_IM.indd 3 2012/05/22 11:29:00 AM
• Steam is produced as soon as the iron is held
horizontally.
Spraying:
• Press the spray button to spray water on the
clothes, as often as required.
Note: When using the water spray function, ensure
that there is enough water in the water tank. You
may have to pump the spray button several times
when using for the first time.
Burst of steam:
• Push the burst of steam button to generate
a powerful burst of steam that can penetrate
fabrics and smooth the most difficult creases.
Wait for a few seconds before pressing again.
• By pressing the burst of steam button at in-
tervals you can also iron vertically (curtains,
hanging garments, etc.)
Note: The burst of steam function can only be used
at the“MAX“ temperature setting. Only use this
function when the pilot light turns off.
Dry ironing:
When ironing without steam, follow the “steam
ironing” section. Ensure that the variable steam
control remains in position “O” (no steam).
Self-cleaning:
The self-cleaning feature cleans inside the sole-
plate, removing impurities. We recommend using
this function every 10-15 days.
• Set the variable steam control to position “O”
(no steam).
• Fill the water tank to maximum level.
• Set the temperature control dial to “MAX” and
wait for the pilot light to switch off.
• Remove the plug from the wall socket and
press the self-cleaning button until the boiling
water, steam and impurities escape.
• When the soleplate has cooled down, you
can clean it with a damp cloth
How to clean and store:
• After using, remove the plug from the wall
socket, lift the iron with the filling hole down-
wards to empty the remaining water from the
water tank.
• Insert the plug into the wall socket, and set
the temperature control dial to “MAX” for 1-2
minutes to evaporate the remaining water,
and then unplug the iron and let it cool down
before storing it.
ATTENTION:
The iron must not be left unattended while it is
connected to the wall socket. If the power cord is
damaged, contact your nearest authorized service
center for repair.
In case of any repairs or replacement of the power
cord or plug, contact your nearest authorized ser-
vice center for repair.
Note:
• This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• The iron must not be left unattended while it is
connected to the wall socket.
• The plug must be removed from the wall
socket before the water tank is filled with wa-
ter.
• The filling aperture must not be opened dur-
ing use. Instructions for the safe refilling of the
water tank is given.
23600A_IM.indd 4 2012/05/22 11:29:00 AM
TROUBLE SHOOTING
Pre-caution
Check fabric type is suitable for high steam
temperature
Switch steam setting to 0 (off) after use or
when filling tank.
Fill to MAX mark only.
If iron is left on the item in the horizontal
position for too long it may burn the fabric.
Check temperature setting is suitable for
fabric type.
Ensure iron is in the upright position.
Appliance must be of similar wattage to
prevent overloading.
Note that there can be up to 5 household
plug sockets on 1 circuit.
Check temperature setting is suitable for
fabric type.
Use an old linen cloth to remove any trace
of dirt on the soleplate. Use iron soleplate
cleaner or methylated spirits for bad marks.
Check temperature setting is suitable for
fabric type.
Ensure temperature control dial is set to the
3 dot position for steaming.
Check temperature setting is suitable for
fabric type.
Use distilled or demineralised water in your
iron to prevent blocking.
Action
Set the temperature to steam setting (cotton)
Turn steam switch setting to steam or 0
position
Empty water tank
When adjusting item place iron down in the
vertical position
Turn the temperature control dial to the
desired temperature setting.
Switch on household socket
Check the socket with another appliance
Unplug all appliances attached to the same
circuit and check iron.
Turn down temparature on control dial.
Clean and rinse item.
Use spray function to dampen item and
check temperture is correct.
Use steam function.
Set the steam button/switch to on or full.
Set temperature control dial to MAX or 3 dot
position for steaming.
If your iron is fitted with a self clean function
carry out cleaning as per instructions.
Reason
Temperature is too low
Steam switch is on self clean
function
Tank is overfilled
Iron is in the horizontal position
too long.
Temperature control dial is in
the off position
Household socket is off.
Household socket is not
working
Overloaded circuit.
Temperature is too hot
Clothing is dirty or not rinsed
thoroughly.
Item is too dry or temperature
too low.
The steam control is off or set
too low.
The iron temperature is
too low.
The steam valve is blocked
due to water scale.
Problem
Iron is leaking water.
Iron is not heating up
Iron is tripping mains
Iron sticking to clothing
Creases not coming out
Not Enough Steam
23600A_IM.indd 5 2012/05/22 11:29:00 AM
23600A_IM.indd 6 2012/05/22 11:29:00 AM
Loading...