Mellerware BREEDE 2200W User Manual
BREEDE 2200W
Cordless kettle
complies with
INTERNATIONAL
IEC60335
SAFETY SPECIFICATIONS
2200W
Model:
VARIOUS
Cher client,
Merci d’avoir choisi d’acheter un produit de marque
Mellerware. Grâce à sa technologie, sa conception
et son fonctionnement et le fait qu’elle dépasse les
normes de qualité les plus strictes, une utilisation
parfaitement satisfaisante et une longue durée de vie du
produit peuvent être assurées.
1. Safety advice and warnings!
Read these instructions carefully before switching on
the appliance and keep them for future reference. Failure to follow and observe these instructions could lead
to an accident. Clean all the parts of the product that
will be in contact with food, as indicated in the cleaning
section, before use
2. Use or working environment:
2.1. Do not place the appliance on hot surfaces, such
as cooking plates, gas burners, ovens or similar items.
2.2. Keep children and bystanders away when using
this appliance.
2.3. Place the appliance on a horizontal, flat, stable
surface suitable for withstanding high temperatures and
away from other heat sources and contact with water.
2.4 Keep the appliance away from flammable material
such as textiles, curtains, cardboard or paper, etc.
2.5 Do not place flammable material near the appliance.
2.6 Do not use the appliance in association with a
programmer, timer or another device that automatically
switches it on.
2.7. Do not use the appliance if the cable or plug is
damaged.
2.8. Ensure that the voltage indicated on the rating label
matches the mains power supply voltage before plugging in the appliance.
2.9 Connect the appliance to the mains power supply
with an earth socket withstanding a minimum of 10
amperes.
2.10 The appliance’s plug must fit into the mains power
supply socket properly. Do not alter the plug.
2.11. If using a multi plug check ratings carefully as the
current used by several appliances could easily exceed
the rating of the multi plug.
2.12. If any of the appliance casings breaks, immediately disconnect the appliance from the mains power
supply to prevent the possibility of an electric shock.
2.13. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.14. Do not force the power cord. Never use the power
cord to lift, carry or unplug the appliance.
2.15. Do not allow the power cord to hang or to come
into contact with the hot surfaces of the appliance.
2.16. Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
2.17. The appliance is not suitable for outdoor use.
2.18. Do not touch the appliance with wet hands.
2.2. Personal safety:
2.1. CAUTION: Do not leave the appliance unattended
during use as there is a risk of an accident.
2.2. Do not touch the heated parts of the appliance, as
it may cause serious burns.
2.3. This appliance is only for domestic use, not for
industrial or professional use. It is not intended to be
used by guests in hospitality environments such as
bed and breakfast, hotels, motels, and other types of
residential environments, even in farm houses, areas
of the kitchen staff in shops, offices and other work
environments.
2.4. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
2.3. Use and care:
2.3.1. Do not use the appliance if the parts or accessories are not properly fitted.
2.3.2. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.3. This appliance should be stored out of reach of
children.
2.3.4. Do not store the appliance if it is still hot.
2.3.5. If, for some reason, the appliance was to catch
fire, disconnect the appliance from the mains power
supply and DO NOT USE WATER TO PUT THE FIRE
OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only by
suitably qualified technician, and that only original spare
parts or accessories are used to replace existing par ts/
accessories.
2.4.2. If the power cord is damaged, the manufacturer
or its service agent or a similarly qualified person must
replace it to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the warranty and the manufacturer’s
liability null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance’s protective film (if applicable).
3.1.2. Before using the product for the first time, clean
the parts that will come into contact with food in the
manner described in the cleaning section.
3.2 Use and care:
3.2.1. Open the lid of the kettle, fill with tap water to the
desired level. (Min. capacity is 0.5L and max. capacity
is 1.7L). In hard water areas, using purified or filtered
water is recommended to reduce the amount of scale
build up in the kettle. (Note: You may also fill through
the spout, but be careful not to overfill – use water level
gauge to check).
3.2.2. Close the lid until it clips. Place the kettle on the
base and plug into the mains.
3.2.3. To switch the kettle on, press the On/off switch
to the down position. (CAUTION: Do not use excessive
force). When the water has boiled the kettle will switch
off automatically. You can stop the kettle from boiling at
any time by pressing the ON/off switch to the upwards
position.
3.2.4. Pour slowly and carefully. If you wish to re-boil,
please allow a minute for the kettle to cool down.
3.2.5 Warning: If the kettle has just boiled it will be full
of steam that will escape if the lid is opened.
3.2.6 IMPORTANT: Do not open the lid when steam
is coming out of the spout. Before pouring or filling
always remember to disconnect from electricity.
3.2.7 Note: If the kettle is switched on when empty
or with insufficient water, then the kettle will switch
off automatically to protect against dry boiling. Wait
±15minutes until the heating element cools down,
refill with tap water and use as normal. This protection function is not designed for regular use, as it will
shorten the life of the element. If the kettle is over filled,
boiling water may be ejected. The kettle is only to be
used with the stand provided (cordless models only).
The appliance must not be immersed in liquid during
cleaning. If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person
must replace it to avoid a hazard.
4. Cleaning and Maintenance
4.1. DESCALING
Always ensure that the kettle is disconnected from the
mains before descaling. Scaling or furring is a common
problem in hard water areas.
4.2. Fill the kettle to MAX position and boil the water.
Remove the kettle from the power socket and the base
unit and place it in an empty sink or bowl.
4.3. Add 50 grams of Citric Acid (available from chemists) or other descaler products (available at supermarkets) to the water or as directed.
4.4. Leave it to stand for approximately 5 minutes or
until the effervescence subsides, and then empty the
water. Rinse thoroughly, and wipe.
Loading...