Mellerware 62200 User Manual

Sylvio

Jug Blender

450W

PLEASE READ ALL INSTRUCTIONS BEFORE USE

MW_ 62200_IM .indd 1 2012/07/11 12:52:11 PM

Model:
62200

Description:

1. Measuring cup

2. Jug lid

3. Jug

4. Stainless steel blades

5. 3 Speed with pulse function

6. Non-slip feet

1

2

3

4

5

6

Safety instructions:

When using electrical appliances, basic
safety precautions should always be
followed, including the following:

•Read all the instructions carefully before
operating the appliance.

•To protect against electrical shock, do not
immerse the appliance, its power cord or
plug in water or any other liquid.

•Ensure that the appliance is placed out of
reach of children. Never allow a child to
use this appliance.

•Unplug the appliance when it is not in use
and before undertaking any cleaning task.

•Do not operate any appliance with a
damaged power cord or plug or after
the appliance malfunctions or has been
damaged in any manner. Return the
appliance to the nearest authorized service
centre.

•The use of accessories not recommended
by the manufacturer may cause injuries.

MW_ 62200_IM .indd 2 2012/07/11 12:52:11 PM

•Do not use this appliance outdoors.

•Do not let the power cord hang over the

edge of a table or counter or touch any hot
surfaces.

•Do not place the appliance on or near a
hot gas or electric burner, or in a heated
oven.

•Always ensure that the appliance is
switched off before plugging it into a wall
socket. To disconnect, turn the speed
control dial to the “0”(off) position, switch
off at the wall socket and then remove the
plug from the wall socket.

•This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for their
safety.

•Children should be supervised to ensure

that they do not play with the appliance.

•Switch off the appliance and disconnect
it from the wall socket before changing
accessories.

•To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the plug and the
appliance.

•Handle the blender and its attachments
with care – remember the blades are razor­sharp and should be kept out of the reach
of children.

•Ensure that the blender is completely
assembled before operating. The blender
will not operate unless it is properly
assembled.

•Do not attempt to operate the blender by
any method other than those described in
this instruction manual.

•Always operate the blender with the
blender jug lid in position.

•Keep fingers, hands, knives and other
utensils away from the moving blades.

• Do not place hands or fingers into the
blender jug unless the motor and blades
have come to a complete stop. Ensure the
speed selection dial is in the ‘0’ position
and the appliance is switched off at the
wall socket and it is unplugged before
removing the lid from the blender.

•Ensure the motor and the blades have
completely stopped before disassembling.

•Ensure the speed selection dial is in the
‘0’ position and that the appliance is
switched off at the wall socket and that it is
unplugged.

handle so it is at the 5 o’clock position and
then turn it clock wise until it clicks into
place. The jug handle should be in the 3
o’clock position.

• Insert the measuring cup into the lid and
turn clockwise to lock.

• Place the lid onto the jug, position it so
that it is at the 5 o’clock position and then
turn it clock wise until it clicks into position.
The handle and the lid should be in the 3
o’clock position.

Instructions for use:

• Place the ingredients you wish to blend
into the jug.

• Place the lid on the jug. Place the
measuring cup into the hole in the lid and
turn clockwise to lock.

• Place your hand on the lid and apply firm
pressure before selecting the desired
speed. The appliance is fitted with a safety
switch and requires sufficient downward
pressure for it to switch on.

• Turn the speed control dial to the desired
setting. Use the “P” (pulse function) for
complete control while blending. This
function uses maximum power as long as
you hold it in position.

WARNING: NEVER LEAVE THE APPLIANCE
ALONE WHILE IN OPERATION.

•After using the blender, always move the
switch into the ‘0’ setting, switch it off at
the wall socket and then remove the plug.
To remove the jug simply rotate it anti­clockwise and lift it off the motor base.

Before first use:

•Remove all the packaging and promotional
material. All parts of the blender are to be
thoroughly cleaned before being used.

•Always exercise extreme caution when
cleaning inside the blender, the blades are
very sharp.

Useful tips:

•To achieve the best results when pureeing
solid ingredients, place small portions into
the jug one by one instead of placing a
large quantity inside all at once.

•If you are processing solid ingredients, cut
them into small pieces (2-3cm) first.

•When mixing solid ingredients start off first

Assembling the jug:

• Ensure that the blender is not plugged
into the wall socket.

• Make sure that the blender is switched off
(switch is in the ‘0’ position).

with a small amount of liquid. Gradually
add the solid ingredients and then more
liquid through the opening in the lid.

•Always place your hand on top of the
blender while it is in use.

• Place the jug onto the base, position the

MW_ 62200_IM .indd 3 2012/07/11 12:52:11 PM

Cleaning:
Motor base:

•Never immerse the motor base in water.
Only wipe it with a damp cloth.

Blender jug:

•Empty the jug and fill it with water. Place
the jug on the motor base and turn the
switch several times to the ‘P’ setting.
Empty the jug and rinse until clean.

•Always exercise extreme caution when
cleaning the inside the jug as the blades
are sharp.

WARNING: THE JUG OR ANY PART OF
THE JUG ASSEMBLY SHOULD NOT BE
CLEANED USING A DISH WASHER. USE
OF A DISH WASHER MAY RESULT IN
DAMAGE AND WILL VOID THE WARRANTY.

Service:

•Before returning your product for service
or repair – check the following:

• Your household wall socket is working
properly.

• The mains supply circuit is not overloaded.

• The instructions for use have been

followed carefully.

• All safety switches are engaged when the
blender is switched on.

•If service becomes necessary within the
guarantee period the appliance should be
returned to your nearest approved service
centre.

MW_ 62200_IM .indd 4 2012/07/11 12:52:11 PM

MW_ 62200_IM .indd 5 2012/07/11 12:52:11 PM

MW_ 62200_IM .indd 6 2012/07/11 12:52:11 PM