EXECUTIVE
GRAND CAYMAN 20L STAINLESS STEEL URN
complies with
INTERNATIONAL
IEC60335
SAFETY SPECIFICATIONS
1950W
Model:
22550
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 year guarantee
MW_22550_IM_Dec2011.indd 1 2013/03/04 10:54:32 AM
Dear customer,
Many thanks for choosing to purchase a MELLERWARE brand product. Thanks to its technology, design
and operation and the fact that it exceeds the strictest quality standards, a fully satisfactory use and long
product life can be assured.
Cool-touch
lifting handle
Tap
Variable thermostat
control knob
Pilot light
WATER BOILING TEMPERATURES AT ATMOSPHERIC CONDITIONS:
Atmospheric Pressure (kPa) Boiling Temperature (water) (°C)
75 92
80 93
85 95
90 97
95 98
100 100
105 101
110 102
IMPORTANT SAFEGUARDS:
• It is essential that you read this instruction manual before use, in order to operate the appliance
safely.
• Do not touch the stainless steel parts of this appliance as they become hot during use.
• Do not immerse the appliance, it’s power cord or
plug, in water or any other liquid. Do not place the
appliance under running water unless the appliance is being filled with water to be boiled.
• If the power cord is damaged, it must be replaced
by the manufacturer or its service agent to avoid
MW_22550_IM_Dec2011.indd 2 2013/03/04 10:54:33 AM
injury.
• Do not allow the plug or power cord to come into
contact with sharp, rough or hot surfaces.
• Do not use the appliance outdoors.
• This appliance is for household use only. This
appliance is not for industrial or professional
use.
• Do not use this appliance for anything other than
its intended use. Doing so will render the warranty and manufacturer’s liability null and void.
• Switch off the appliance before removing the
plug from the wall socket. Remove the plug from
the wall socket when the appliance is not in use
and before cleaning.
• Allow the appliance to cool completely before
undertaking any cleaning task.
• Do not open the lid while water is being boiled
to avoid scalding by hot steam.
• If the appliance is filled beyond the “FULL” indication line, boiling water may be ejected out of
the appliance.
• The appliance should be placed on a firm and
flat surface and away from edges to avoid falling over or off the counter.
• Never attempt to move the appliance when it
is full of hot (or cold) water. This appliance becomes heavy when filled with water.
• Do not boil or heat up any other liquid other
than water in this appliance.
• Do not attempt to alter, repair or dismantle the
appliance, it’s power cord or plug. This is dangerous and could cause serious injury. If the
appliance malfunctions, return the appliance to
a technical service centre for repair.
• Do not use plug adaptors or extension cords
with this appliance.
• Do not insert the appliance’s plug into a socket
with more than one outlet. This is a high power
appliance and could cause the electricity supply to trip.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
INSTALLATION:
• Remove all the packaging materials and tape,
as well as any protective plastic from the appliance, it’s power cord and plug.
• Clean off any glue residue left over from the
protective plastic or adhesive tape.
• Place the appliance on a flat level surface with
the tap facing the user.
• Before connecting the appliance to the power
supply, ensure that the “ON/OFF” switch is set
to the “OFF” position.
HOW TO USE THE APPLIANCE:
• The appliance is constructed almost entirely of
stainless steel and should give the user many
years of trouble-free service as long as it is used in
accordance with this instruction manual.
• Before using this appliance for the first time, rinse
out the appliance with warm water.
• Ensure that the appliance is disconnected from
the wall socket when filling and emptying the inner tank.
• Fill the inner tank with water, do not fill the tank
above the “FULL” level indicator. Avoid under filling the appliance (less than 1L) as this will cause
the “boil dry protection system” to operate and will
reduce the life-span of the element. The “MIN” capacity is 1 litre.
• Ensure that the lid is on correctly and locked into
place. To lock the lid, secure it to the top of the inner tank, then turn the lid clockwise, ensuring that
the guides on the lid handle slot into the guides of
the appliance handle. The lid will lock into place
once it can no longer turn clockwise.
Slide lid into place.
• Connect the urn to the power supply by inserting
the plug into the wall socket. Switch the appliance
on and then turn the variable thermostat control
knob to the desired temperature. The heating pilot
light will illuminate and the unit will begin to boil the
water to the selected temperature.
• Once the water has been heated to the selected
temperature or has reached boiling point, the heating pilot light switches off and the keep warm pilot
light illuminates. The urn will automatically switch
over to the keep warm function.
• Ensure that the water level is checked regularly to
prevent the appliance from “boiling dry”.
• To turn the appliance off, turn the variable temperature control knob anti-clockwise, switch the ON/
OFF switch to the“OFF” position and remove the
plug from the wall socket.
MW_22550_IM_Dec2011.indd 3 2013/03/04 10:54:33 AM
BOIL DRY:
The appliance is fitted with a “boil dry protection
system”, which will switch the appliance off if the
water level is too low.
• When “boil dry” occurs, switch the appliance off
and remove the plug from the wall socket and
allow the appliance to cool down.
• Fill the urn with water to the desired level. (Minimum capacity is 1L).
• Do not fill the inner tank with water above the
“FULL” level indicator.
• Insert the plug into the wall socket and switch the
appliance on. The heating pilot light will illuminate and the water will begin to boil.
CLEANING AND MAINTENANCE:
Regular care and maintenance will ensure long and
trouble free operation. In order to ensure proper
cleaning and to avoid causing damage to the appliance the instructions below should be followed.
• Always keep the appliance clean.
• This appliance should be cleaned at the end of
each day using warm hot soapy water, then rinse
thoroughly with clean water. Ensure that the appliance is switched off and has cooled down before any cleaning task is undertaken.
• Using and a damp soft cloth wipe the inside of
the urn so that no residue builds up. Any buildup of scale deposits can usually be removed by
placing an appropriate solution of vinegar and
water in the inner tank and allowing it to soak
overnight without turning the appliance on. This
should then be followed by the usual cleaning
with warm soapy water followed by rinsing thoroughly with clean water.
• Wipe down the remainder of the appliance with a
soft damp cloth, taking care to avoid water entering any part of the appliance.
MW_22550_IM_Dec2011.indd 4 2013/03/04 10:54:33 AM
MW_22550_IM_Dec2011.indd 5 2013/03/04 10:54:33 AM
Loading...