Melitta CaffeO Barista User Manual

Bedienungsanleitung

Operating Instructions

ENGLISH DEUTSCH

ENGLISH DEUTSCH

ITALIANO NEDERLANDS FRANÇAIS

1

DEUTSCH

Technische Daten

Werkseinstellungen

Cappuccino Getränkemenge 130 ml

Bohnensorte 1
Kaeestärke Stark
Brühtemperatur Normal

Latte Macchiato Getränkemenge 190 ml

Bohnensorte 1
Kaeestärke Stark
Brühtemperatur Normal

Milch Schaummenge 120 ml

Milchmenge 120 ml

Heißwasser Getränkemenge 120 ml

50

50

Table of contents

Table of contents

1 For your safety ...................................................................................................................53

1.1 Symbols used ..........................................................................................................53

1.2 Proper use .................................................................................................................54

1.3 Danger due to electrical current ......................................................................54

1.4 Risk of burning and scalding .............................................................................55

1.5 General safety..........................................................................................................55

2 Overview of the appliance ............................................................................................56

2.1 Overview of the appliance .................................................................................56

2.2 Overview of the control panel ..........................................................................58

3 First steps .............................................................................................................................59

3.1 Unpacking the appliance .................................................................................... 59

3.2 Checking the delivery contents ........................................................................ 59

3.3 Positioning the appliance ................................................................................... 60

3.4 Connecting the appliance ..................................................................................60

3.5 Switching the appliance on for the rst time ..............................................60

4 Basic operation ..................................................................................................................61

4.1 Switching the appliance on and o ................................................................61

4.2 Using the control panel .......................................................................................62

4.3 Navigating in the menu .......................................................................................63

4.4 Filling with coee beans and using BeanSelect ........................................65

4.5 Using ground coee .............................................................................................66

4.6 Filling in water .........................................................................................................67

4.7 Adjusting the outlet ..............................................................................................68

4.8 Using milk .................................................................................................................68

4.9 Emptying the drip tray and coee grounds container .............................70

5 Preparing beverages ....................................................................................................... 71

5.1 Preparing espresso and café crème ................................................................71

5.2 Preparing cappuccino ..........................................................................................71

5.3 Preparing latte macchiato ..................................................................................72

5.4 Preparing milk froth and warm milk ...............................................................72

5.5 Preparing hot water ..............................................................................................73

5.6 Changing beverage settings before and during preparation ...............73

5.7 Stopping beverage preparation .......................................................................74

5.8 Preparing two beverages simultaneously ....................................................74

6 Permanently changing beverage settings .............................................................75

6.1 Selecting recipes ....................................................................................................75

6.2 Changing default settings ..................................................................................76

ENGLISH

51

ENGLISH

Table of contents

7 Personal settings – "My Coee" ..................................................................................76

7.1 Editing personal user proles ............................................................................77

7.2 Selecting/changing personal settings ...........................................................78

7.3 Preparing beverages with personal settings ...............................................79

8 Changing basic settings .................................................................................................80

8.1 Setting the language ............................................................................................ 80

8.2 Setting the time ......................................................................................................80

8.3 Activating/deactivating Auto Bean Select ....................................................81

8.4 Setting Auto OFF ....................................................................................................81

8.5 Setting energy save mode ..................................................................................82

8.6 Resetting the appliance to the factory settings..........................................83

8.7 Displays in the System menu .............................................................................83

8.8 Setting the grinding neness ............................................................................84

8.9 Converting the connection for the milk hose .............................................85

9 Care and maintenance ....................................................................................................85

9.1 General cleaning ....................................................................................................85

9.2 Rinsing the coee system ................................................................................... 86

9.3 Cleaning the brewing unit ..................................................................................86

9.4 "Easy Cleaning" programme ..............................................................................87

9.5 "Cleaning milk system" programme ...............................................................87

9.6 "Cleaning coee system" programme ............................................................89

9.7 "Descaling" programme ......................................................................................90

9.8 Setting the water hardness ................................................................................91

9.9 Using a water lter .................................................................................................91

10 Problems ...............................................................................................................................93

11 Transport, storage and disposal .................................................................................94

11.1 Venting the appliance .......................................................................................... 94

11.2 Transporting the appliance ................................................................................94

11.3 Disposing of the appliance .................................................................................95

12 Technical data ....................................................................................................................95

52

Dear Customer,

Thank you for purchasing the CaeOBarista fully automatic coee maker.

The operating instructions will help you to discover the diverse options
oered by the appliance and enjoy your coee to the full.

Read the operating instructions through carefully. This will help to avoid
personal injury and material damage. Store the operating instructions care­fully. If you pass the appliance on, enclose the operating instructions with it.

Melitta accepts no liability for damage caused by failure to observe the
operating instructions.

If you require further information or have any questions on the appliance,
contact Melitta or visit our website at:
www.melitta.de

We hope you enjoy using your appliance.

1 For your safety

The appliance conforms to the following European directives:

ū 2006 / 95 / EC (low voltage),
ū 2004 / 108 / EC (electromagnetic compatibility),
ū 2011 / 65 / EU (RoHS),
ū 2009 / 125 / EC (eco-design / ErP).

The appliance has been built using the latest technology. Residual dangers
nevertheless exist.

You must observe the safety instructions to avoid dangers. Melitta accepts
no liability for damage caused by failure to observe the safety instructions.

For your safety

ENGLISH

53

For your safety

1.1 Symbols used

The following symbols indicate particular risks in using the appliance or
provide useful tips.

CAUTION

The signal word CAUTION indicates possible injuries.

ENGLISH

ATTENTION

The signal word ATTENTION indicates possible damage to the appliance.

Information

The signal word "Information" indicates additional notes and tips on using
the appliance.

1.2 Proper use

The appliance is used to prepare beverages consisting of coee beans or
ground coee and to heat milk and water.

The appliance is intended for use in private households.

Any other use is regarded as improper and may lead to personal injury and
material damage. Melitta accepts no liability for damage which arises due
to improper use of the appliance.

1.3 Danger due to electrical current

If the appliance or the power cable is damaged, the risk
of a fatal electric shock is run.

Observe the following safety instructions to avoid dan­gers due to electrical current:

ū Do not use a damaged power cable.
ū A damaged power cable may only be replaced by the

manufacturer, its customer service or a similarly quali­ed person.

ū Do not open any covers rmly screwed onto the appli-

ance housing.

ū Only use the appliance when it is in a technically aw-

less condition.

54

ū A defective appliance may only be repaired by an

authorised workshop. Do not repair the appliance
yourself.

ū Do not undertake any changes to the appliance, its

components or its accessories.

ū Do not immerse the appliance in water.

1.4 Risk of burning and scalding

Escaping uids and steam may be very hot. Parts of the
appliance also become very hot.

Observe the following safety instructions to avoid scalds
and burns:

ū Prevent skin from coming into contact with escaping

uids and steam.

ū Do not touch any nozzles on the outlet during opera-

tion.

1.5 General safety

Observe the following safety instructions to avoid per­sonal injury and material damage:

ū Do not reach into the interior of the appliance during

operation.

ū The appliance and its power cable must be kept out of

the reach of children under 8 years of age.

ū This appliance may be used by children over 8 years of

age and by persons with reduced physical, sensory or
mental capabilities or a lack of experience and knowl­edge if they are supervised or have been instructed in
using the appliance safely and understand the result­ing risks.

ū Children must not play with the appliance. Cleaning

and maintenance must not be undertaken by children
younger than 8 years of age. Children over 8 years of
age must be supervised during cleaning and mainte­nance.

ū Disconnect the appliance from the power supply

when it is left unsupervised for a long time.

For your safety

ENGLISH

55

ENGLISH

Overview of the appliance

2 Overview of the appliance

2.1 Overview of the appliance

2

1

3

4

5

6

7

9

Fig. 1: Front left of the appliance

1 Water tank
2 2-chamber bean container
3 Ground coee chute
4 Cup rest
5 Control panel
6 Height-adjustable outlet with 2 coee nozzles, 2 milk nozzles,

1 hot water nozzle, cup illumination
7 Coee grounds container (inner)
8 Drip tray
9 ON/OFF button

56

8

10

Overview of the appliance

11

12

13

14

17

16

15

Fig. 2: Front right of the appliance

10 Cover
11 "Grinding neness adjustment" lever (behind the cover)
12 Power cable with cable insert compartment
13 Brewing unit (behind the cover)
14 Milk hose connection at the outlet (can be converted to left side)
15 Milk hose connection at the drip tray (possible on both sides)
16 Cup plate
17 Float

ENGLISH

57

Overview of the appliance

2.2 Overview of the control panel

2019

21 22 23 24 25

ENGLISH

18

09:52

33

Please select your beverage

29303132

Fig. 3: Control panel

Item Designation Function

18 Direct keys Preparing beverages
19 Espresso Preparing espresso
20 Café crème Preparing café crème
21 Cappuccino Preparing cappuccino
22 Latte macchiato Preparing latte macchiato
23 Milk froth/warm

milk

24 Hot water Preparing hot water
25 2 cups Two-cup dispensing
26 Beverage

amount slider

27 Coee strength

slider

28 My Coee Selecting personal settings for beverages
29 BEANSELECT Selecting the bean type
30 Up arrow

button

31 Down arrow

button

32 menu/ok Calling up the menu or conrming inputs
33 Display Display of current menus and messages

Preparing milk froth or warm milk

Setting the beverage amount

Setting the coee strength

Navigating up in the menu

Navigating down in the menu

Example: ready symbol

26

27

28

58

3 First steps

This chapter describes how to prepare your appliance for use.

3.1 Unpacking the appliance

CAUTION

Contact with cleaning agents may lead to eye and skin irritation.

 Store the enclosed cleaning agents out of the reach of children.

 Unpack the appliance. Remove the packaging material, the adhesive

strips and the protective lms from the appliance.

 Keep the packaging material for transport and possible return ship-

ments.

Information

The appliance may contain traces of coee and water. The appliance has
been tested in the factory to ensure that it functions perfectly.

3.2 Checking the delivery contents

Check the completeness of delivery using the following list. If parts are
missing, contact your retailer.

ū Coee spoon with screw-in aid for the water lter,
ū Milk hose or milk container including milk hose (depending on model),
ū Cleaning brush,
ū Coee system cleaning agent,
ū Milk system cleaning agent,
ū Descaling agent,
ū Water lter,
ū Test strip for determining the water hardness.

First steps

ENGLISH

59

ENGLISH

First steps

3.3 Positioning the appliance

Observe the following instructions:

ū Do not position the appliance in damp rooms.
ū Position the appliance on a stable, at and dry surface.
ū Do not position the appliance in the vicinity of sinks or the like.
ū Do not position the appliance on hot surfaces.
ū Position the appliance a sucient distance, approx. 10cm, away from

the wall and other objects. The space above the appliance should be at
least 20cm.

ū Route the power cable so that it cannot be damaged by edges or hot

surfaces.

3.4 Connecting the appliance

Observe the following instructions:

ū Check that the supply voltage matches the operating voltage specied

in the technical data (see table Technical data on page95).

ū Only connect the appliance to a properly installed earthing contact

socket. If in doubt, consult a specialist electrician.

ū The socket must be fused with at least a 10 A fuse.

3.5 Switching the appliance on for the rst time

During initial starting up, you can set the language, the time and the water
hardness. The settings can be changed at a later point in time (see chap­ter 8 Changing basic settings on page80 and chapter 9.8 Setting the
water hardness on page91).

Use the enclosed test strip to determine the water hardness. Observe the
instructions on the test strip packaging and in table Water hardness range
on page95.

Information

We recommend pouring away the rst two cups of coee after initially
starting up.

60

Basic operation

Requirement: The appliance has been positioned and connected.

1. Place a vessel beneath the outlet.

2. Switch the appliance on with the ON/OFF button.

» The welcome display appears on the display.
» The request to carry out set-up appears on the display: Please set up

the machine.

» The "menu/ok" button ashes.

3. Conrm with "menu/ok".

» The Language menu appears.

4. Select your language with the arrow buttons. Conrm with

"menu/ok".

» The Clock menu appears.

5. Select the hour and minutes with the arrow buttons. Conrm each set-

ting with "menu/ok".

» The Water hardness menu appears.

6. Select the determined water hardness range with the arrow buttons or

conrm the default value with "menu/ok".

» The request Please rell and insert water tank appears.

7. Remove the water tank. Rinse the water tank out with clean water. Fill

the water tank with fresh water and insert it.

» The appliance heats up and performs automatic rinsing.
» The ready symbol and the request Fill beans appear in the display

8. Fill coee beans into the bean container. To do this, read chapter Filling

with coee beans and using BeanSelect on page65.

ENGLISH

4 Basic operation

This chapter describes basic operating steps for using the appliance on a
daily basis.

4.1 Switching the appliance on and o

Before switching on when initially starting up the appliance, read chap­ter 3.5 Switching the appliance on for the rst time on page60.

Information

ū The appliance performs automatic rinsing when switching on and o.
ū During rinsing, rinsing water is also conducted into the drip tray.

61

Basic operation

ENGLISH

9

Fig. 4: ON/OFF button Fig. 5: Welcome display

Hello

Switching the appliance on

1. Place a vessel beneath the outlet.

2. Press the ON/OFF button (9).

» The welcome display appears on the display (see Fig. 5).
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.

Switching the appliance o

1. Place a vessel beneath the outlet.

2. Press the ON/OFF button (9).

» The appliance performs automatic rinsing.
» The appliance switches o.

Information

ū The appliance switches o automatically when it is not operated for a

long time. Automatic rinsing is also carried out in this case.

ū The o time can be set in the Auto OFF menu, see chapter 8.4 Setting

Auto OFF on page81.

ū If no beverage has been prepared since switching on or if the water tank

is empty, no rinsing takes place.

4.2 Using the control panel

The essential functions can be accessed using the control panel.

Press the button with a ngertip. The control panel does not react when
touched with a pen or other objects.

Only those buttons which can be used in the appliance's current status light
up.

62

Use the following actions to operate the control panel:

Brief press

Press a button briey to select a function.

Long press

Press a button for longer than 2 seconds to select a second
function which may be available.

Basic operation

Press "+" or "–"

Press "+" or "–" to increase or reduce the current value.
Hold a button down to change the value continuously.

Press the slider

Press on the slider to select a value.

Pull the slider

Press and pull the slider to increase or reduce the current
value.

4.3 Navigating in the menu

To set individual beverages and for maintenance and care, you must call up
the menu in the display and navigate in the menu.

Observe the instructions on the display.

Direct keys
Espresso
Coffee strength

Strong

Confirm with OK:

Fig. 6: Example: display with buttons

Use the following options to navigate in the menu:

ENGLISH

63

ENGLISH

Basic operation

Calling up the menu and conrming the selection

Press the "menu/ok" button for longer than 2 seconds to call up the
menu.
Press the "menu/ok" button briey to conrm your selection.

Navigating in the menu

Press the arrow buttons to navigate down or up in the menu. Hold
an arrow button down to quickly switch to the menu options.

Exiting a menu

Select the command Exit with the arrow buttons and conrm with
"menu/ok" to exit a menu.
Exit sub-menus, which only display information and in which you
do not carry out any settings, with "menu/ok".

Calling up sub-menus

Certain of the appliance's functions are reached by calling up several sub­menus in succession.

Sub-menus are always called up in a similar manner. Navigation to the
Descaling programme is described here as an example.

Care

Exit
Rinsing
Easy cleaning
Cleaning milk system
Cleaning coffee system
Descaling
Filter

Fig. 7: Navigating to the Descaling programme

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Use the arrow buttons to select Care and conrm with

"menu/ok".

3. Use the arrow buttons to select Descaling and conrm with "menu/ok".

The selection of functions is always shown in shortened form in these oper­ating instructions:

 Navigate to the Care > Descaling menu.

64

4.4 Filling with coee beans and using BeanSelect

Roasted coee beans lose their aroma. Only ll the bean container with as
many coee beans as you will consume over the next 3 – 4 days.

ATTENTION

Using unsuitable types of coee may lead to clogging of the grinder.

 Do not use freeze-dried or caramelised coee beans.
 Do not pour ground coee into the bean container.

2

34

Fig. 8: 2-chamber bean container

The 2-chamber bean container (2) enables you to use two dierent types
of coee. Auto Bean Select ensures that the best coee beans are auto­matically selected for various coee specialities. Espresso-based beverages
take their coee beans from left bean chamber 1(34), café crème-based
beverages from right bean chamber 2(35).

The following table shows the assignment of the bean chambers to the
coee beverages. You can change the settings (see chapter 6.2 Changing
default settings on page76).

35

29

Basic operation

ENGLISH

Bean chamber Coee beverage

1 (34)
2 (35)

Espresso, cappuccino, latte macchiato
Café crème

1. Open the lid of the 2-chamber bean container(2).

2. Fill espresso beans into left bean chamber 1(34) and café crème beans
into right bean chamber 2 (35).

3. Close the lid of the 2-chamber bean container.

4. The "BEANSELECT" button (29) can be used to select a bean type prior
to preparation (see chapter  Changing beverage settings before prepara-
tion on page73)

65

ENGLISH

Basic operation

Information

ū The grinder is emptied during each grinding process. Minimal coee

type mixing may nevertheless occur.

ū Empty grinding causes a dierent type of noise and is normal.

4.5 Using ground coee

You may also use ground coee to prepare coee beverages.

ATTENTION

The use of unsuitable types of coee may lead to brewing unit clogging.

 Do not use any instant products.
 Fill a maximum of one coee spoon of ground coee into the ground

coee chute.

3

Fig. 9: Ground coee chute

1. Open the lid of the ground coee chute (3).

2. Use the enclosed coee spoon for dosing.
Fill a maximum of one coee spoon of ground coee into the ground
coee chute.

3. Close the lid of the ground coee chute.

4. Proceed as described in chapters 5 to 7.

66

Information

ū Two-cup dispensing is not possible when using ground coee.
ū If you do not prepare any coee within 3 minutes of opening the ground

coee chute, the appliance switches to operation with coee beans and
the ground coee is discharged into the coee grounds container.

4.6 Filling in water

Use only fresh, cold water without carbon dioxide for optimum coee
enjoyment. Change the water daily.

Information

The quality of the water extensively determines the taste of the coee.
Therefore, use a water lter (see chapter 9.8 Setting the water hardness on
page91 and chapter 9.9 Using a water lter on page91).

1

Fig. 10: Water tank

1. Open the lid of the water tank and pull the water tank (1) upwards out of

the appliance using the handle.

2. Fill the water tank with water.
Note the maximum capacity of 1.8 litres.

3. Insert the water tank into the appliance from above and close the lid.

Basic operation

ENGLISH

67

Basic operation

4.7 Adjusting the outlet

The outlet (6) is height-adjustable. Set the greatest possible distance
between the outlet and the vessel. Depending on vessel, push the outlet up
or down.

ENGLISH

6

Fig. 11: Height-adjustable outlet

4.8 Using milk

Use cooled milk for optimum coee enjoyment.

Depending on model, you can use the enclosed milk container or the milk
hose and conventional milk packs.

Information

The connection for the milk hose is installed on the right of the outlet in
the factory. If you require the connection on the left side, read chapter 8.9
Converting the connection for the milk hose on page85.

68

Basic operation

Connecting the milk container (depending on model)

Only ll as much milk as you will use immediately into the milk container.

6

14

37

36

Fig. 12: Connecting the milk container to the appliance

1. Fill the desired amount of milk into the milk container (37).

2. Push the outlet (6) down.

3. Connect the milk hose (36) to the milk container and the connection
(14) at the outlet.

Information

Store the lled milk container in the refrigerator.

Connecting the milk hose (depending on model)

6

14

36

38

ENGLISH

Fig. 13: Connecting the milk hose to the appliance

1. Push the outlet (6) down.

2. Connect the milk hose (36) to the connection at the outlet (14).

3. Insert the milk hose into a conventional milk pack (38).

69

ENGLISH

Basic operation

4.9 Emptying the drip tray and coee grounds container

When the drip tray (8) and the coee grounds container (7) are full, the
appliance requests you to empty them. The projecting oat (17) also indi­cates that the drip tray is full. Always empty both containers.

7

8

17

Fig. 14: Drip tray, coee grounds container and oat

1. Pull the drip tray (8) forwards out of the appliance.

2. Remove the coee grounds container (7) and empty it.

3. Empty the drip tray.

4. Insert the coee grounds container.

5. Push the drip tray into the appliance to stop.

Information

The appliance requests you to empty the drip tray and the coee grounds
container after a dened number of beverages have been dispensed. If
you empty the containers whilst the appliance is switched o, it does not
register this process. It may therefore occur that you are requested to empty
the containers even though the drip tray and the coee grounds container
are still full.

70

5 Preparing beverages

There are three options for preparing beverages:

ū Standard dispensing,
ū Preparation with recipes (see chapter 6.1 Selecting recipes on page75),
ū Use of the "My Coee" function (see chapter 7 Personal settings – "My

Coee" on page76).

Standard dispensing is described in this chapter.

Note:

ū The storage containers should contain sucient amounts of coee and

water. If the lling level is too low, the appliance requests you to rell it.

ū The appliance does not indicate a lack of milk.
ū The vessels for the beverages should be suciently large (see table

Factory settings on page95).

5.1 Preparing espresso and café crème

Requirement: The ready symbol appears on the display.

1. Place a vessel beneath the outlet.

2. Press the "Espresso" or "Café crème" button.

» The grinding process and beverage dispensing start.
» Beverage dispensing is ended automatically.

3. Remove the vessel.

» The ready symbol appears on the display.

Preparing beverages

ENGLISH

5.2 Preparing cappuccino

Requirement: The ready symbol appears on the display and milk is con-

nected.

1. Place a vessel beneath the outlet.

2. Press the "Cappuccino" button.

» The grinding process and coee dispensing start.
» Coee dispensing is ended automatically.
» Milk dispensing begins.
» Beverage dispensing is ended automatically.

3. Remove the vessel.

» Easy Cleaning? (OK for start) appears in the display.

4. You can execute the Easy Cleaning programme or prepare further bev­erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the

display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page87.

71

ENGLISH

Preparing beverages

b) Prepare further beverages.

» The ready symbol appears on the display.

5.3 Preparing latte macchiato

Requirement: The ready symbol appears on the display and milk is con-

nected.

1. Place a vessel beneath the outlet.

2. Press the "Latte macchiato" button.

» Milk dispensing begins.
» Milk dispensing is ended automatically.
» The grinding process and coee dispensing start.
» Beverage dispensing is ended automatically.

3. Remove the vessel.

» Easy Cleaning? (OK for start) appears in the display.

4. You can execute the Easy Cleaning programme or prepare further bev-

erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the

display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page87.

b) Prepare further beverages.

» The ready symbol appears on the display.

5.4 Preparing milk froth and warm milk

The preparation of milk froth and warm milk is similar.

Requirement: The ready symbol appears on the display and milk is con-

nected.

1. Place a vessel beneath the outlet.

2. Press the "Milk froth/milk" button.

a) Milk froth = press button briey
b) Warm milk = press button for longer (2 seconds)

» Milk dispensing begins.
» Beverage dispensing is ended automatically.

3. Remove the vessel.

» Easy Cleaning? (OK for start) appears in the display.

4. You can execute the Easy Cleaning programme or prepare further bev-

erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the

display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page87.

72

Preparing beverages

b) Prepare further beverages.

» The ready symbol appears on the display.

5.5 Preparing hot water

Requirement: The ready symbol appears on the display.

1. Place a vessel beneath the outlet.

2. Press the "Hot water" button.

» Hot water dispensing begins.
» Beverage dispensing is ended automatically.

3. Remove the vessel.

» The ready symbol appears on the display.

5.6 Changing beverage settings before and during
preparation

You can change beverage settings before and during beverage preparation.

Information

These settings only apply to current beverage preparation.

Changing beverage settings before preparation

You can change the bean type, the total beverage amount and the coee
strength before selecting a beverage.

ENGLISH

 Before selecting a beverage, select a bean type with the "BEANSELECT"

button.

 Before selecting a beverage, use the "Beverage amount" slider to set a

beverage amount.

 Before selecting a beverage, use the "Coee strength" slider to set the

coee strength.

Information

ū When preparing latte macchiato and cappuccino, the total beverage

amount is subdivided into a coee and a milk amount according to a
specied ratio.

ū If you do not prepare a beverage within 1 minute, the appliance switches

to the default settings.

73

ENGLISH

Preparing beverages

Changing beverage settings during preparation

You can change the beverage amount and the coee strength during bev­erage preparation.

 During beverage dispensing (coee or milk), use the "Beverage amount"

slider to set the relevant beverage amount.

 During the grinding process, use the "Coee strength" slider to set the

coee strength.

5.7 Stopping beverage preparation

If you want to stop beverage preparation prematurely, press the selected
direct key again.

5.8 Preparing two beverages simultaneously

The "2 cups" button is used to prepare two beverages simultaneously.
Two-cup dispensing is possible for espresso, cappuccino, café crème and
latte macchiato. Two-cup dispensing is not possible for any other type of
beverage.

25

6

Fig. 15: Two-cup dispensing

1. Place two vessels beneath the outlet (6).

2. Press the "2 cups" button (25).

3. Continue as described for preparation of the relevant beverage.

Information

ū The setting only applies to the next beverage which is prepared.
ū If you do not prepare a beverage within 1 minute, the appliance switches

to single-cup dispensing.

74

Permanently changing beverage settings

6 Permanently changing beverage settings

The appliance oers further options for preparing coee specialities. You
can use default recipes or permanently change the beverage settings.

6.1 Selecting recipes

The following coee specialities are available:

ū Espresso: Espresso (standard), ristretto, lungo, double espresso, double

ristretto.

ū Café crème: Café crème (standard), double café crème, americano, amer-

icano extra shot, long black.

ū Cappuccino: Cappuccino (standard), espresso macchiato, café latte, café

au lait.

ū Latte macchiato: Latte macchiato (standard), latte macchiato extra shot,

latte macchiato triple shot, at white.

Information

The recipe selection remains valid until it is changed again.

Recipe selection is similar for all beverages. The selection of a ristretto is
described as an example here.

Direct keys
Espresso
Recipes

Exit
Espresso
Ristretto
Lungo
Double Espresso
Double Ristretto

ENGLISH

Fig. 16: Recipe selection for ristretto

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Direct keys > Espresso > Recipes menu.

3. Use the arrow buttons to select Ristretto and conrm with

"menu/ok".

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.
» When an espresso is next prepared, the ristretto recipe will be used.

75

ENGLISH

Personal settings – "My Coee"

6.2 Changing default settings

You can change the following default settings depending on beverage:

ū Coee amount: in millilitres,
ū Froth amount: in millilitres,
ū Milk amount: in millilitres,
ū Hot water amount: in millilitres,
ū Beans: bean chamber 1 or 2,
ū Coee strength: very mild, mild, normal, strong, very strong,
ū Temperature: low, normal, high.

Information

The default settings remain valid until they are changed again.

Changing the beverage settings is similar for all beverages. Changing the
coee strength for an espresso is described here as an example.

Direct keys
Espresso
Coffee strength

Strong

Confirm with OK:

Fig. 17: Setting the coee strength

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Direct keys > Espresso > Coee strength menu.

3. Use the arrow buttons to select the desired coee strength and conrm

with "menu/ok".

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.
» The selected coee strength is used the next time an espresso is pre-

pared.

7 Personal settings – "My Coee"

The "My Coee" function enables you to save personal beverage settings
and assign them to a user.

76

Personal settings – "My Coee"

7.1 Editing personal user proles

Up to four user proles can be used.

Changing the name of a user prole

You can change the names of the user proles.

My coffee

--1-­ Change name

AB

A B CDEFGH IJKLM
NOPQRS TUVWXYZ

-, 123 4567890
Exit

Fig. 18: Changing the name of a user prole

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the My Coee menu.

3. Use the arrow buttons to select a user and conrm with "menu/ok".

4. Use the arrow buttons to select Change name and conrm with "menu/

ok".

» The menu for selecting individual characters appears.

5. Use the arrow buttons to select individual characters and conrm each

with "menu/ok" (see Fig. 18).

6. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

ENGLISH

Activating/deactivating a user prole

You may only use users whose prole is activated.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the My Coee menu.

3. Use the arrow buttons to select a user and conrm with "menu/ok".

4. Use the arrow buttons to select Enabled/disabled and conrm with

"menu/ok".

77

ENGLISH

Personal settings – "My Coee"

5. Use the arrow buttons to select Enabled or Disabled and conrm with

"menu/ok".

6. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

7.2 Selecting/changing personal settings

Depending on beverage, you can assign the following settings to a user:

ū Coee amount: in millilitres,
ū Froth amount: in millilitres,
ū Milk amount: in millilitres,
ū Hot water amount: in millilitres,
ū Beans: bean chamber 1 or 2,
ū Coee strength: very mild, mild, normal, strong, very strong,
ū Temperature: low, normal, high.

The assignment of personal settings to a user is always similar. Setting the
coee amount for a cappuccino is described here as an example.

My coffee

--1-­ Cappuccino

Exit
Recipes
Coffee amount
Froth amount
Beans
Coffee strength
Temperature

Fig. 19: Changing personal settings

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the My Coee menu.

3. Use the arrow buttons to select a user and conrm with "menu/ok".

4. Navigate to the Cappuccino > Coee amount menu.

5. Use the arrow buttons to select an amount and conrm with "menu/ok"

6. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.
» The next time a cappuccino is prepared by the user, the selected coee

amount is used.

78

Personal settings – "My Coee"

7.3 Preparing beverages with personal settings

The preparation of beverages using the "My Coee" function is similar
for all beverages. The preparation of a cappuccino is described here as an
example.

Requirement: The ready symbol appears on the display and milk is con­nected.

1. Place a vessel beneath the outlet.

2. Press the "My Coee" button until the desired user is shown on the
display.

3. Press the "Cappuccino" button.

» The grinding process and coee dispensing start.
» Coee dispensing is ended automatically.
» Milk dispensing begins.
» Beverage dispensing is ended automatically.

4. Remove the vessel.

» Easy Cleaning? (OK for start) appears in the display.

5. You can execute the Easy Cleaning programme or prepare further bev­erages.
a) Execute the Easy Cleaning programme. Follow the instructions on the

display. Information on this is available in chapter 9.4 "Easy Cleaning"
programme on page87.

b) Prepare further beverages.

» The ready symbol appears on the display.

ENGLISH

Information

ū To exit the "MyCoee" function, press the "My Coee" button until the

ready symbol appears.

ū If you do not prepare a beverage within 3 minutes, the appliance auto-

matically switches to the ready symbol.

79

ENGLISH

Changing basic settings

8 Changing basic settings

Operating steps which change the appliance's basic settings are described
in the following chapter.

8.1 Setting the language

You can set the display text language.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Language menu.

3. Use the arrow buttons to select a language and conrm with "menu/ok".

4. Exit the menu with the command Exit.

» The ready symbol appears on the display.

8.2 Setting the time

You can set the time shown on the display.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Clock menu.

3. Use the arrow buttons to select the hours and minutes. Conrm each

setting with "menu/ok".

4. Exit the menu with the command Exit.

» The ready symbol appears on the display.

Information

If you want to prevent the time from being shown on the display, set the
time to 00:00.

80

Changing basic settings

8.3 Activating/deactivating Auto Bean Select

You can activate/deactivate automatic selection of a bean type.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the System > Auto Bean Select menu.

3. Use the arrow buttons to select Enabled or Disabled and conrm with

"menu/ok".

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

8.4 Setting Auto OFF

If you do not operate the appliance for a long time, it switches o automat­ically after a specied time. Set the duration until the appliance switches o
in the Auto OFF menu. You can also dene a specic point in time.

Information

If the duration and point in time are activated simultaneously, the appliance
switches o after the event which occurs rst.

ENGLISH

Setting the duration for Auto OFF

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Auto OFF > OFF after.. menu.

3. Use the arrow buttons to select a time and conrm with "menu/ok".

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

Information

Auto OFF cannot be deactivated completely. After 8 hours without being
operated, at the latest, the appliance switches o.

81

ENGLISH

Changing basic settings

Setting the point in time for Auto OFF

The OFF time point is deactivated as default in the factory.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Auto OFF > OFF at.. menu.

3. Use the arrow buttons to select the hours and minutes. Conrm each

setting with "menu/ok"

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

Information

If you want to deactivate Auto OFF, set the OFF time point to 00:00.

8.5 Setting energy save mode

Energy save mode lowers the heating temperature and switches o the
illumination in the control panel. The "menu/ok" button remains lit.

If you do not operate the appliance for a long time, it automatically
switches to energy save mode after a specied time. The period of time
until energy save mode is activated is set in the Energy save mode menu.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Energy save mode menu

3. Use the arrow buttons to select a period of time and conrm with

"menu/ok".

4. Exit the menu with the command Exit.

» The ready symbol appears on the display.

82

Information

ū Energy save mode is ended by pressing the "menu/ok" button.
ū Energy save mode cannot be deactivated completely. After 4 hours

without being operated, at the latest, the appliance switches to energy
save mode.

Changing basic settings

8.6 Resetting the appliance to the factory settings

The appliance can be reset to the factory settings.

Information

If you reset the appliance to the factory settings, all personal settings are
lost, including the settings in the My Coee menu.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the System > Factory settings menu.

3. Use the arrow buttons to select Reset and conrm with "menu/ok".

4. Repeatedly select the Exit command to exit the menu.

» The ready symbol appears on the display.

8.7 Displays in the System menu

The System menu provides information on the status of the appliance.

The information can be accessed via the System > Statistics menu and the
System > SW version menu. Press the "menu/ok" button to exit the menus.

The following table provides an overview of the information content.

Menu Information

Statistics

Beverages Number of beverages prepared since starting up.
Brewing unit cleaning Number of cleaning processes performed.
Descaling Number of descaling processes performed.

Progress bars These show the number of beverages which can still be

prepared until the appliance requests you to perform
cleaning or descaling.

SW version

MAIN XXXXXXXXXXX Installed software version.

ENGLISH

83

ENGLISH

Changing basic settings

8.8 Setting the grinding neness

The grinding neness of the coee beans inuences the taste of the coee.
The grinding neness has been optimally set prior to delivery. We recom­mend adjusting the grinding neness after around 1, 000 beverages have
been dispensed (around 1 year) at the earliest.

ATTENTION

Setting the grinding neness whilst the grinder is stationary may cause
damage to the grinder.

 Only set the grinding neness whilst the grinder is running.

11

10

Fig. 20: Setting the grinding neness

Requirement: The ready symbol appears on the display.

1. Open the cover(10). To do this, reach into the recess on the right of the

appliance and pull the cover o upwards.

2. Prepare any coee beverage.

3. Move the lever (11) forwards or backwards whilst the grinder is running.

ū Backwards = grinding neness coarser
ū Forwards = grinding neness ner

4. Close the cover. To do this, insert the bottom of the cover into the appli­ance and swing it up until it engages.

» The ready symbol appears on the display.

Information

The grinding neness is optimally set when the coee ows evenly out of
the outlet and a ne, dense crema appears.

84

Care and maintenance

8.9 Converting the connection for the milk hose

The milk hose can be connected on the left or right side of the outlet.

41

40

39

Fig. 21: Turning the inlet

Proceed as follows to convert the outlet:

1. Pull the milk hose from the appliance.

2. Push the outlet down as far as it will go.

3. Release the milk unit (39) using two ngers and pull the milk unit down-

wards o the outlet.

4. Pull the milk distributor (40) upwards out of the milk unit.

5. Turn the inlet (41) 180°.

Installation is carried out similarly in reverse order.

9 Care and maintenance

Regular cleaning and maintenance ensure the consistently high quality of
your beverages.

ENGLISH

9.1 General cleaning

Clean the appliance regularly. Immediately remove external soiling caused
by milk and coee.

ATTENTION

The use of unsuitable cleaning agents may lead to scratched surfaces.

 Do not use any abrasive cloths, sponges or cleaning agents.

Requirement: The appliance is switched o.

 Clean the outside of the appliance using a soft, damp cloth and normal

washing up liquid.

 Rinse the drip tray and the coee grounds container using a soft, damp

cloth and normal washing up liquid.

 Clean the bean container using a soft, dry cloth.

85

ENGLISH

Care and maintenance

9.2 Rinsing the coee system

During rinsing, the nozzles at the outlet and the internal parts of the coee
system are rinsed. As a result, rinsing water from the interior enters the drip
tray.

When switching on and o, the appliance rinses the coee system.

Rinsing can also be carried out manually.

Requirement: The ready symbol appears on the display.

1. Place a vessel beneath the outlet.

2. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

3. Navigate to the Care > Rinsing menu.

4. Use the arrow buttons to select Start and conrm with "menu/ok".

» The coee system is rinsed.
» The ready symbol appears on the display.

9.3 Cleaning the brewing unit

To avoid damage to the appliance, we recommend cleaning the brewing
unit once a week.

10

43

Fig. 22: Removing the brewing unit

Requirement: The appliance is switched o.

1. Open the cover (10). To do this, reach into the recess on the right of the
appliance and pull the cover o upwards.

2. Press and hold the red lever (42) on the brewing unit handle (13) and
turn the handle clockwise until it engages at the stop.

3. Pull the brewing unit out of the appliance using the handle.

86

13

42

Care and maintenance

4. Rinse the entire brewing unit thoroughly from all sides under running
water. Make particularly sure that coee residues are removed from the
sieve (43).

5. Allow the brewing unit to drip dry.

6. Use a soft, dry cloth to remove coee residues from the surfaces inside
the appliance.

7. Insert the brewing unit into the appliance. Press and hold the red lever
on the brewing unit handle and turn the handle counter clockwise until
it engages at the stop.

8. Close the cover. To do this, insert the bottom of the cover into the appli­ance and swing it up until it engages.

9.4 "Easy Cleaning" programme

The milk system is rinsed using the "Easy Cleaning" programme.

Each time after preparing a beverage with milk, the appliance requests you
to execute the "Easy Cleaning" programme.

You can also run the "Easy Cleaning" programme manually.

Requirement: The ready symbol appears on the display.

1. Place a vessel beneath the outlet.

2. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

3. Navigate to the Care > Easy Cleaning menu.

4. Use the arrow buttons to select Start and conrm with "menu/ok".

5. Follow the further instructions on the display up to the end of the "Easy
Cleaning" programme.

» The ready symbol appears on the display.

ENGLISH

9.5 "Cleaning milk system" programme

With this programme, the milk system is cleaned using a milk system clean­ing agent.

To maintain hygiene and avoid damage to the appliance, we recommend
carrying out the cleaning programme once a week.

The cleaning programme takes approximately 3 minutes and should not be
interrupted.

87

ENGLISH

Care and maintenance

ATTENTION

Use of unsuitable milk system cleaning agents may cause damage to the
appliance.

 Use Melitta® PERFECT CLEAN Espresso Machines milk system cleaning

agent exclusively.

Requirement: The ready symbol appears on the display.

1. Place a vessel with a capacity of at least 0.7 litres beneath the outlet.

2. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

3. Navigate to the Care > Cleaning milk system menu.

4. Use the arrow buttons to select Start and conrm with "menu/ok".

5. Follow the further instructions on the display up to the end of the inten-

sive cleaning programme.

» The ready symbol appears on the display.

Cleaning the milk unit

We additionally recommend regularly cleaning the milk unit, the milk hose
and the milk container (depending on model).

41

40

39

Fig. 23: Removing the milk unit

Proceed as follows to remove the milk unit:

1. Pull the milk hose from the appliance.

2. Push the outlet down as far as it will go.

3. Release the milk unit (39) using two ngers and pull the milk unit down-

wards o the outlet.

4. Pull the milk distributor (40) upwards out of the milk unit.

5. Pull the inlet (41) out upwards.

6. Clean the individual parts with warm water. Use the enclosed cleaning

brush, a soft, damp cloth and normal washing up liquid.

Installation is carried out similarly in reverse order.

88

Care and maintenance

Information

The milk container (depending on model) is dishwasher-safe.

9.6 "Cleaning coee system" programme

This cleaning programme is used to remove residues and coee oil residues
using coee machine cleaning agents.

To avoid damage to the appliance, we recommend carrying out the clean­ing programme every 2 months or as requested by the appliance.

The cleaning programme takes approximately 15 minutes and should not
be interrupted.

CAUTION

Contact with coee machine cleaning agent may lead to eye and skin
irritation.

 Observe the processing instructions on the coee machine cleaning

agent packaging.

ATTENTION

Use of unsuitable coee machine cleaning agents may damage the
appliance.

 Use Melitta® PERFECT CLEAN Espresso Machines cleaning tablets exclu-

sively.

ENGLISH

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Care > Cleaning menu.

3. Use the arrow buttons to select Start and conrm with "menu/ok".

4. Follow the further instructions on the display up to the end of the clean-

ing programme.

» The ready symbol appears on the display.

89

ENGLISH

Care and maintenance

9.7 "Descaling" programme

The descaling programme is used to remove limescale deposits in the inte­rior of the appliance using coee machine descaling agents.

To avoid damage to the appliance, we recommend carrying out the descal­ing programme every 3 months or as requested by the appliance.

The descaling programme takes approximately 25 minutes and should not
be interrupted.

CAUTION

Contact with descaling agent may lead to eye and skin irritation.

 Observe the processing instructions on the descaling agent packaging.

ATTENTION

Use of unsuitable descaling agents may damage the appliance.

 Use Melitta® ANTI CALC Espresso Machines liquid descaling agent exclu-

sively.

ATTENTION

A water lter may be damaged if it is screwed in during the descaling
programme.

 Remove the water lter before starting the descaling programme (see

chapter 9.9 Using a water lter on page91).

 Place the water lter into a vessel lled with tap water during the desca-

ling programme.

 The water lter can be reinserted and reused on completion of the des-

caling programme.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Care > Descaling menu.

3. Use the arrow buttons to select Start and conrm with "menu/ok".

4. Follow the further instructions on the display up to the end of the desca-

ling programme.

» The ready symbol appears on the display.

90

Care and maintenance

9.8 Setting the water hardness

The set water hardness inuences the frequency of descaling. The harder
the water, the more frequently the appliance has to be descaled.

Information

The water hardness cannot be set if you use a water lter (see chapter 9.9
Using a water lter on page91).

Determine the water hardness with the enclosed test strip. Observe the
instructions on the test strip packaging and in table Water hardness range
on page95.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Water hardness menu using the arrow buttons

3. Use the arrow buttons to select the water hardness range and conrm

with "menu/ok".

4. Exit the menu with the command Exit.

» The ready symbol appears on the display.

9.9 Using a water lter

Use of a water lter extends the service life of the appliance and the appli­ance has to be descaled less frequently. The water lter contained in the
scope of delivery lters calcium and other pollutants out of the water.

44

45

1

ENGLISH

46

Fig. 24: Screwing/unscrewing the water lter

The water lter (45) is screwed into and unscrewed from the thread (46)
on the base of the water tank (1) using the screwing aid at the end of the
enclosed coee spoon (44).

91

ENGLISH

Care and maintenance

Inserting the water lter

Information

Place the water lter into a vessel lled with fresh tap water for a few min­utes before inserting it.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Care > Filter > Insert lter menu.

3. Use the arrow buttons to select Start and conrm with "menu/ok".

4. Follow the further instructions on the display.

» The water hardness is automatically set to Soft.
» The ready symbol appears on the display.

Changing the water lter

Change the water lter when the appliance requests you to do so.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Care > Filter > Change lter menu.

3. Use the arrow buttons to select Start and conrm with "menu/ok".

4. Follow the further instructions on the display.

» The ready symbol appears on the display.

Removing the water lter

The water lter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water lter
in a vessel lled with tap water in the refrigerator.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the Care > Filter > Remove lter menu.

3. Use the arrow buttons to select Start and conrm with "menu/ok".

4. Follow the further instructions on the display.

» The water hardness is automatically reset to the previous setting.
» The ready symbol appears on the display.

92

10 Problems

If the actions listed below fail to rectify the problems or other problems not
listed here occur, contact our hotline (local rate).

Germany: +49 (0)571/ 861 900

Problem Cause Action

Coee only emerges
from the outlet in
drips.

Coee does not ow. Water tank not lled

Fill beans appears on
the display although
the bean container
is lled.

Loud grinder noise. Foreign object in the

Brewing unit cannot
be inserted after
removing.

System error appears
on the display.

Grinding neness
too ne.

Appliance soiled.  Clean the brewing unit (see chap-

Appliance calcied.  Descale the appliance (see chap-

or inserted incor­rectly.

Brewing unit
clogged.

Beans do not drop
into the grinder.

grinder.
Brewing unit is not

locked correctly.

Drive is not in the
correct position.

Software problem  Switch the appliance o and

 Set a coarser grinding neness (see

chapter 8.8 on page84).

ter 9.3 on page86).

 Run the cleaning programme (see

chapter 9.6 on page89).

ter 9.7 on page90).

 Fill the water tank and ensure it is

positioned correctly (see chap­ter 4.6 on page67).

 Clean the brewing unit (see chap-

ter 9.3 on page86).

 Tap lightly on the bean container.
 Clean the bean container.
 Coee beans too oily. Use dierent

coee beans.

 Contact the hotline.

 Check whether the handle for the

brewing unit locking mechanism is
correctly engaged (see chapter 9.3
on page86).

 Press and hold the "My Coee" but-

ton. Also press the ON/OFF button.
The appliance initialises. Release
the buttons again.

on again (see chapter 4.1 on
page61).

 Contact the hotline.

Problems

ENGLISH

93

ENGLISH

Transport, storage and disposal

11 Transport, storage and disposal

11.1 Venting the appliance

We recommend venting the appliance when it is not used for a long while,
prior to transport and when there is a risk of frost.

During venting, remaining water is removed from the appliance.

Requirement: The ready symbol appears on the display.

1. Press the "menu/ok" button for 2 seconds.

» The menu appears on the display.

2. Navigate to the System > Venting menu.

3. Select Start using the arrow buttons and conrm with "menu/ok".

4. Follow the further instructions on the display.

» The appliance switches o.

11.2 Transporting the appliance

ATTENTION

Freezing remaining water may damage the appliance.

 Prevent the appliance from being exposed to temperatures below 0°C.

Information

Transport the appliance in the original packaging. This avoids damage in
transit.

Before transporting the appliance, carry out the following activities:

1. Vent the appliance (see chapter 11.1 Venting the appliance on

page94).

2. Empty the drip tray and the coee grounds container.

3. Empty the water tank.

4. Empty the bean container.

5. Clean the appliance (see chapter 9.1 General cleaning on page85).

6. Secure loose parts (cup plate, etc.) with suitable adhesive tape.

7. Package the appliance.

94

11.3 Disposing of the appliance

Appliances marked with this symbol are subject to European Directive
2002 / 96 / EC for WEEE (Waste Electrical and Electronic Equipment).

Electrical appliances do not belong in domestic waste.

 Dispose of the appliance in an environmentally friendly manner via

suitable collection systems.

Technical data

12 Technical data

Technical data

Operating voltage 220 V to 240 V, 50 Hz
Power consumption Max. 1,450 W
Pump pressure Static, max. 15 bar
Dimensions

Width
Height
Depth

Capacity

Bean container
Water tank

Weight (empty) 10.5 kg

Ambient conditions

Temperature
Relative humidity

Water hardness range °dH °f

Soft 0 to 7.2 0 to 13
Medium 7.2 to 14 13 to 25
Hard 14 to 21.2 25 to 38
Very hard > 21.2 >38

Factory settings

Espresso Beverage amount 40 ml

Café crème Beverage amount 120 ml

ENGLISH

255 mm
365 mm
465 mm

2 × 135 g

1.8 l

10°C to 32°C
30% to 80% (non-condensing)

Bean type 1
Coee strength Strong
Brewing temperature Normal

Bean type 2
Coee strength Strong
Brewing temperature Normal

95

ENGLISH

Technical data

Factory settings

Cappuccino Beverage amount 130 ml

Bean type 1
Coee strength Strong
Brewing temperature Normal

Latte macchiato Beverage amount 190 ml

Bean type 1
Coee strength Strong
Brewing temperature Normal

Milk Froth amount 120 ml

Milk amount 120 ml

Hot water Beverage amount 120 ml

96

ENGLISH

97

Melitta Europa GmbH & Co. KG

Division Household Products

Ringstr. 99

D-32427 Minden

Germany

www.melitta.de

Editorial department:

ZINDEL AG

www.zindel.de

Mel 002-1v2-1.0 | 2013-06

0370-0513