Page 1
NOTES ON THIS MANUAL
Keep these instructions with your computer at all times. The
proper set up, use and care can help extend the life of your computer. In the event that you transfer ownership of this computer,
please provide these instructions to the new owner.
This manual is divided into sections to help you find the information you require. Along with the Table of Contents, an Index
has been provided to help you locate information.
In addition, many application programs include extensive help
functions. As a general rule, you can access help functions by
pressing F1 on the keyboard. These help functions are available to
you when you use the Microsoft Windows
the various application programs.
We strongly recommend that you read the Online Manual for your
Notebook, which can be found in the Start Menu.
Information about your PC
This interactive manual is designed to provide additional information about your Notebook as well as useful links accessible via the
World Wide Web.
xp
Windows
invites you to a tour (notes on the task bar) to familiar-
ize yourself with the operating system. We listed further useful
sources of information starting on page 78.
®
operating system or
Page 2
AUDIENCE
These instructions are intended for both the novice and advanced
user. Regardless of the possible professional utilization, this Notebook is designed for day-to-day household use. The functions
and applications for use with this Notebook have been designed
with the entire family in mind.
DOCUMENT YOUR NOTEBOOK
It is important to document the details of your Notebook purchase
in the event you need warranty service. The serial number can be
found on the back of the Notebook:
Serial Number ......................................
Date of Purchase ......................................
Place of Purchase ......................................
QUALITY
Medion has selected the components in this computer for their
high level of functionality, ease of use, safety and reliability.
Through balanced hardware and software design we are able to provide you with an innovative personal computer useful for applications
relating to both work and leisure.
We are pleased to welcome you as our newest customer. Thank
you for choosing Medion.
SERVICE
Medion is pleased to provide individualized customer service
throughout the life of your Notebook. Please feel free to contact a
customer service representative with any questions relating to
this Notebook.
Copyright© 2005 Medion®. All rights reserved. Microsoft®, MS-DOS®, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. Pentium
tered trademark of Intel Corporation. The names of actual companies and products mentioned
herein may be the trademarks of their respective owners.
This product incorporates copyright protection technology that is protected by method claims
of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorised by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Information in this document is subject to change without notice.
ii
®
is a regis-
Page 3
Table of Contents:
SAFETY AND MAINTENANCE ..................................................1
Safety instructions ............................................................ 3
Data Security ................................................................ 3
Operational Safety ......................................................... 4
General Safety Information ............................................. 4
Important Additional Safety instructions............................ 5
CD-ROM/CD-RW/DVD/DVD-RW Drive safety ...................... 6
TFT Display Safety ......................................................... 6
Set-Up Location............................................................. 7
Environmental conditions ................................................ 7
Power Adapter............................................................... 8
Cabling ........................................................................ 9
Modem......................................................................... 9
Information about the regulatory compliance of
wireless LAN ................................................................. 9
Touch pad .................................................................... 9
Battery operation..........................................................10
VIEWS & FIRST SETUP ........................................................11
Views of the Notebook ......................................................13
Open Notebook ............................................................13
Front View ...................................................................14
Left Side......................................................................14
Right Side....................................................................14
Rear Side ....................................................................15
Indicators ....................................................................16
Hotkeys.......................................................................18
Getting Started................................................................23
The Windows
MAIN COMPONENTS ............................................................29
Power Supply ..................................................................31
On/Off button...............................................................31
Power Adapter..............................................................32
Battery Operation .........................................................33
Inserting the Battery.................................................33
Removing the battery................................................33
Charging the Battery.................................................34
Battery Power ..........................................................34
Power Management.......................................................36
Standby Mode..........................................................36
Suspend (hibernate) mode.........................................36
®
XP Desktop .............................................26
iii
Page 4
Display...........................................................................37
Opening and Closing the Display .....................................37
Screen Resolution .........................................................37
Connecting an External Monitor ......................................38
Connecting a TV ...........................................................39
Data entry ......................................................................40
The Keyboard...............................................................40
Touch pad ...................................................................41
The Hard drive ................................................................42
Important Directories ....................................................43
The Optical Drive .............................................................44
CD-RW/DVD-ROM Combo Drive ......................................44
Handling Discs .........................................................44
Loading a Disc .........................................................45
Emergency Ejection of a blocked Disc ..........................46
Playing Music CDs.....................................................46
Playing DVD Movies ..................................................46
Writing CDs .............................................................47
The Sound Card...............................................................49
External Audio Ports......................................................49
Modem ...........................................................................52
Modem port .................................................................52
The Network ...................................................................53
What is a network? .......................................................53
Fast Ethernet-Network ..............................................54
Wireless LAN............................................................57
The Multimedia Card Reader..............................................59
Inserting Memory Cards.................................................60
Removing Memory Cards ...........................................60
The PCI Express/54 Connection..........................................61
Installing PCI Express Card/54........................................61
Removing PCI Express Card/54.......................................62
The PCMCIA Card Slot ......................................................63
32-bit CardBus Port.......................................................63
Use of PC-cards ............................................................63
Installing a PCMCIA card ...........................................64
Removing a PCMCIA card...........................................64
TV card with remote control...............................................65
TV card .......................................................................65
Remote control.............................................................66
Inserting batteries ....................................................66
Button Layout ..........................................................66
Button Layout ..........................................................67
Installing the USB remote control receiver..........................70
iv
Page 5
Changing the transmission/reception
channels .................................................................70
Operation ....................................................................71
Inserting the TV card ................................................71
Removing a PC card..................................................71
Connections .................................................................72
Watch TV.....................................................................73
Universal Serial Bus (USB) Port..........................................74
IEEE 1394 (FireWire
Bluetooth........................................................................76
Software.........................................................................78
Getting to Know Windows XP..........................................78
Windows
Windows
Microsoft
Windows
Software Help ..............................................................79
Device Drivers..............................................................79
Information about Your PC .............................................80
Digital Signatures .........................................................80
Windows Activation...................................................81
The BIOS Set-up-Program..............................................81
Running the BIOS Set-up...........................................81
Navigating the BIOS Utility ........................................82
FIRST AID ...........................................................................83
FAQ – Frequently Asked Questions .....................................85
Data and System Security .................................................87
Data Security ...............................................................87
Maintenance Programs ..................................................87
Password Reset Disk .................................................87
Windows
System Recovery .............................................................90
Restoring Microsoft Windows XP......................................90
System Restore powered by Symantec ............................91
Limits of Restore Factory Settings
Restore option 3).......................................................92
Performing the Restore..............................................92
Troubleshooting...............................................................94
Localize the Cause ........................................................94
Check Cables and Connections ...................................94
The Power On Self Test (POST)...................................94
Errors And Possible Causes ........................................95
®
) ......................................................75
®
XP Manual ................................................78
®
XP Tour....................................................78
®
Interactive Training ...................................78
®
XP Help and Support..................................78
®
Update.....................................................88
v
Page 6
Additional Support ........................................................96
Driver Support .............................................................96
Maintenance....................................................................97
Maintenance Instructions ...............................................97
Cleaning and Care.........................................................97
Care of the TFT Display..................................................97
Transporting the Notebook .............................................98
Securing your Notebook ............................................99
Using a safety lock ...................................................99
Recycling and Disposal ................................................100
Batteries and Proper Treatment .................................... 100
Upgrades and Repairs.................................................. 101
Notes for Service Engineers ..................................... 102
APPENDIX .........................................................................103
Standards ..................................................................... 105
Electromagnetic Compatibility....................................... 105
Electrical Safety.......................................................... 106
Ergonomics................................................................ 106
Supplementary Information.......................................... 106
ISO 13406-2 Class II................................................... 106
FCC Compliance Statement .......................................... 109
Warranty ...................................................................... 110
Limits of Liability ........................................................112
Local Law .................................................................. 112
Making Copies of This Manual ....................................... 112
Index ........................................................................... 113
vi
Page 7
CChhaapptteerr 11
Safety Handling Components Aid Appendix
Safety and Maintenance
Subject Page
Data Security....................................................3
Set-up Location.................................................7
Environmental Conditions ...................................7
Modem ............................................................9
Information about the regulatory compliance
of wireless LAN Touch Pad ..................................9
Battery Operation ...........................................10
Page 8
2
S
AAFFEETTYY AANNDD
S
M
AAIINNTTEENNAANNCCE
M
E
Page 9
S
AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS
S
Please follow the instructions in this section for the safe operation
of your Notebook:
• DO NOT open the case of the Notebook, the
battery or the power adaptor. When the case is
open there is a danger of severe electric
shock.
• DO NOT insert objects through the slots and
openings of the Notebook. This may lead to
electric shock, electrical short-circuit or fire that
will damage your Notebook.
• DO NOT allow small children to play unat-
tended with electrical equipment.
• DO NOT cover the slots and openings of the
Notebook. These openings are for ventilation
purposes. Covering these vents may lead to
overheating.
S
Safety Handling Components Aid Appendix
• This Notebook is NOT designed for use
within industrial environments.
DATA SECURITY
The supplier does not assume liability for data
loss or damage to data storage units, and no
claims can be accepted for damages resulting
from the loss of data or consequential losses.
S
AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS
S
S
3
Page 10
OPERATIONAL SAFETY
It is important to follow all of the safety instructions in this manual to ensure the safety of you and your Notebook.
GENERAL SAFETY INFORMATION
If you find that:
• the power cord/power adapter is worn or damaged.
• liquid is spilled on the unit.
• the Notebook fails to work properly.
• the Notebook is dropped or the housing is damaged.
You should:
• shut-down your Notebook immediately.
• remove the power cord from the socket.
• contact Customer Service.
• do not restart unless you have contacted Customer Service.
How important is the information you will be storing on your
Notebook? You need to guard against the loss of your data by
making backup copies. You can backup your data onto CD, floppy
disk, or other media such as Zip drives. It depends upon how
much data you have. In this way, if something happens to the
hard drive in your Notebook, you have another copy of your data.
4
S
AAFFEETTYY AANNDD
S
M
AAIINNTTEENNAANNCCE
M
E
Page 11
IMPORTANT ADDITIONAL SAFETY INSTRUCTIONS
When using any electronic equipment, basic safety precautions
should always be taken. Following the guidelines below can reduce the risk of fire, electric shock and personal injury:
• Do not use this product near water (e.g., near a bathtub,
lavatory or kitchens sink, in a wet basement or near a
swimming pool).
• Avoid using a telephone/modem (other than a cordless
type) during an electrical storm. There is a remote risk of
electric shock from lightning.
• Do not use the telephone/modem to report a gas leak in
the vicinity of the leak.
Lithium batteries cannot handle intense pressure, high temperatures or fire. Danger of
explosion if replaced incorrectly. Replace batteries with a compatible type as recommended by the manufacturer. Lithium batteries are hazardous waste and require proper
disposal. Contact the Medion Service Center
for additional information on battery disposal.
Safety Handling Components Aid Appendix
S
AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS
S
S
5
Page 12
CD-ROM/CD-RW/DVD/DVD-RW DRIVE SAFETY
• CD-ROM-/CDRW-/DVD-drives are Laser
Class 1 devices. These lasers must remain in
their sealed casing.
• Danger — Invisible laser radiation when
open. Avoid direct exposure to beam. This
product is certified by the manufacturer to
comply with DHHS rules 21CFR, Chapter 1,
Subchapter J, applicable at date of manufacturer. Refer to optical drive labels for additional details.
• DO NOT remove the drive covers, as expo-
sure to the lasers may be harmful.
• DO NOT look directly into the laser, even
when wearing eye protection.
TFT DISPLAY SAFETY
6
• To avoid damage to the TFT Display, never
open it a full 120º. Do not forcibly open it.
• In order to avoid damage to the display, do
not touch it with your fingers or sharp objects.
• Never lift the Notebook by the TFT Display;
doing so could break the hinges.
• There is a risk of injury if the TFT display
breaks. Use protective gloves to pack up
the broken pieces and contact customer service to arrange for proper disposal.
It is important to thoroughly wash your hands
after handling a broken TFT display. There is
a chance that chemicals may have been released.
S
AAFFEETTYY AANNDD
S
M
AAIINNTTEENNAANNCCE
M
E
Page 13
• Never place objects on top of the
Notebook that would exert any
pressure on the display. There is a
danger that even slight pressure
may break the TFT display.
SET-UP LOCATION
• Keep your Notebook and all connected peripherals away from
moisture, dust, heat and direct sunlight. Failure to do so can lead
to Notebook malfunction or damage.
• It is highly recommended you do not use the Notebook outdoors.
• Operate the Notebook and all peripherals on a stable, balanced
and vibration-free surface.
• Do not leave the base of your Notebook on your lap or any part of
your body for a long period of time while the Notebook is turned
ON or is charging. The Notebook can become very warm while it
is turned on or charging and can cause discomfort or injury from
heat exposure.
ENVIRONMENTAL CONDITIONS
Safety Handling Components Aid Appendix
• The Notebook is most reliably operated at an ambient tempera-
ture between +41° and +104° F and at a relative humidity between 20% and 80% (without condensation).
• When powered off, the Notebook can be stored at tempera-
tures between 32° and 140° F.
• Wait until the notebook has reached ambient (room) tempera-
ture before turning it on or connecting it to the power adapter.
Drastic variations in temperature and humidity can create
condensation within the PC and may cause it to short-circuit.
• For transporting the notebook keep the original packing.
S
AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS
S
S
7
Page 14
POWER ADAPTER
• Do not open the power adapter housing. When the housing is
open there is a danger of severe electric shock. It contains no
user-serviceable parts.
• The electric outlet must be in the vicinity of the Notebook and
within reach of the power adapter cables. DO NOT stretch the
power cables tightly to reach an electric outlet.
• To disconnect your Notebook from the power source, or set the
Notebook to battery operation, remove the power cord from
the Notebook’s power socket.
• Only use the Notebook with a power adaptor (
erating at AC 115V~/60 Hz. In European countries use the
Notebook at AC 220-240V~/50 Hz.
For details on power consumption, please refer to the rating
plate on the rear of your Notebook. If you are unsure of the
type of power supply available at the point of use, ask your local power company.
• Use only the supplied power cord and power adapter.
• If using an extension cord, make certain that it meets your lo-
cal safety requirements. If in doubt, consult an electrician.
• To provide additional protection against electric shock, power
surges, lightning strikes, or other electrical damage to your
Notebook, we recommend the use of a surge protector.
FSP065-AAC) op-
8
S
AAFFEETTYY AANNDD
S
M
AAIINNTTEENNAANNCCE
M
E
Page 15
CABLING
• Arrange cables so no one can walk on or trip over them.
• DO NOT place objects on any of the cables.
Caution – To reduce the risk of fire, use only
No. 26 AWG or larger telecommunication cords
(applies to American Standards).
MODEM
• If your system has a modem, please make sure you connect it
to an analogue telephone line only. Connecting to a digital
PBX, a digital line designed for broadband services or ISDN, a
shared service line or a payphone will damage the modem or
the devices to which it is connected.
INFORMATION ABOUT THE REGULATORY
COMPLIANCE OF WIRELESS
The following low power radio equipment, which has separately been
tested and approved according R&TTE guideline (1999/5/EC), is bundled
with this notebook:
-Wireless LAN
These radio devices are marked individually with the CE mark. The declarations of conformity of these radio devices are available under
www.medion.com/conformity.
LAN
Safety Handling Components Aid Appendix
TOUCH PAD
Light pressure with the tip of your finger is all that is required to
operate the touch pad. Because the touch pad is electrostatic sensitive, objects cannot be used in place of your fingers. Using a pen
or other object can damage the touch pad or cause the Notebook
to malfunction.
S
AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS
S
S
9
Page 16
BATTERY OPERATION
To extend the life and power of your battery and guarantee secure operation, the instructions below should be followed:
• Never expose the battery to direct sunlight or
heat for long periods.
• Do not dispose of the battery by fire as they
may explode. Check with local codes for possible
special disposal instructions.
• Do not open the battery housing; it contains no
user-serviceable parts.
• Disregarding these instructions will lead to dam-
age and under some circumstances may even
cause the battery to explode.
• Keep the battery away from electrically conductive materials, chemi-
cal substances and cleaning agents.
• Only use the originally supplied power adapter to charge the
battery.
• Fully discharge the battery before recharging it.
• Replace the battery only with the same type or an equivalent type
recommended by the manufacturer.
• Charge the battery only until the battery charging light goes out.
Also, refer to the instructions under "Charging the Battery" on
page 34 for instructions on checking the battery level.
• Only change the battery when the unit is switched off.
• Batteries are classified as special waste and should always be
disposed of properly. Contact Customer Service for more details.
• Keep batteries away from children at all times.
• Use only the batteries and power adapter/cord indicated in this
manual.
10
S
AAFFEETTYY AANNDD
S
M
AAIINNTTEENNAANNCCE
M
E
Page 17
CChhaapptteerr 22
Safety Handling Components Aid Appendix
Views & first setup
Subject Page
Open Notebook ............................................... 13
Front View...................................................... 14
Left Side ........................................................ 14
Right Side ...................................................... 14
Rear Side ....................................................... 15
Power and Status Indicators .............................16
Hotkeys ........................................................ 18
Getting started ...............................................23
Page 18
12
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 19
V
IIEEWWSS OOFF TTHHEE
V
N
OOTTEEBBOOOOK
N
OPEN NOTEBOOK
1
2
3
4
5
1 - TFT display (Ö p. 37)
2 - Status LED Indicators (Ö p. 16)
3 - Power ON/OFF (Ö p. 31)
4 - Hotkeys (Ö p. 18)
5 - Touch pad
6 - Touch pad keys (Ö p. 41)
7 - Palm rest
8 - Keyboard (Ö p. 40)
9 - Stereo Speaker
(Ö p. 41)
K
Safety Handling Components Aid Appendix
9
8
7
6
V
IIEEWWSS OOFF TTHHEE
V
N
N
OOTTEEBBOOOOK
K
13
Page 20
FRONT VIEW
10 - Display catch (Ö p. 37)
11 - Optical Drive (Ö p. 44)
12 - Disc eject button (Ö p. 45)
13 - Activity LED optical drive
14 - Emergency ejection (Ö p. 46)
10 8 11 12 13 14
LEFT SIDE
15 16 17 18
15 - Multimedia Card Reader (Ö p. 59)
16 - PCI Express/54 connection (Ö p. 61)
17 - PC card slot PCMCIA (Ö p. 63)
18 - PC card eject button
RIGHT SIDE
19 - Kensington lock (Ö p. 99)
14
V
V
IIEEWWSS
19
&
FFIIRRSSTT SSEETTUUP
&
P
Page 21
REAR SIDE
Safety Handling Components Aid Appendix
20 21 22 23 24 25 26 27 28 29
20 - Power socket (Ö p. 32)
21 - S-Video TV out port (Ö p. 39)
22 - External monitor (Ö p. 38)
23 - Microphone (Ö p. 49)
24 - Modem port (RJ-11) (Ö p. 52)
25 - LAN port (RJ-45) (Ö p. 53)
26 - IEEE 1394 (FireWire®) (Ö p. 75)
27 - USB port (Ö p. 74)
28 - Digital Audio Out (SPDIF, optical) (Ö p. 49)
29 - Audio In (Ö p. 49)
V
IIEEWWSS OOFF TTHHEE
V
N
N
OOTTEEBBOOOOK
K
15
Page 22
INDICATORS
LED's indicate the power and operating system states of the
Notebook. The meaning of each LED is:
n
o
p
16
WIRELESS LAN
This LED wuld be lit when the wireless LAN function is
activated. (optional feature)
POWER SUPPLY INDICATOR
Below you will see the different meanings of the LED in
various situations:
Off The system is powered off or is in Hipernate
mode.
On The notebook is in full operation.
STANDBY INDICATOR
This LED flashes when the Notebook is in stand-by mode.
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 23
q
r
s
t
ACCESS INDICATOR
This LED lights or flashes when the Notebook is
accessing the hard disk.
BATTERY SUPPLY INDICATOR
Below you will see the different meanings of this LED in
various situations:
On Battery is charging.
Blinking Battery is low.
Off Battery is not charging.
CAPITAL LOCK
This LED lights when CAPS-Lock has been activated. This sets
the keyboard to capital letters.
NUM LOCK
This LED lights when NUM-Lock has been activated. It sets the
keyboard so that numbers are assigned to certain characters,
simplifying numerical data input.
Safety Handling Components Aid Appendix
V
IIEEWWSS OOFF TTHHEE
V
N
N
OOTTEEBBOOOOK
K
17
Page 24
HOTKEYS
Launches the Internet Browser.
n
18
Launches the E-Mail Program.
o
To enable or disable the wireless LAN.
p
The Bluetooth key enables or disables the Blue-
q
tooth function.
Button that can be adjusted by the user to enable the
r
preferred program to start quickly.
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 25
ALLOCATION OF THE SPECIAL KEYS
You can allocate programs to the special buttons by means of the
‘Launch Manager’.
You start the program like this:
1. Click on
2. and then choose „All programs”.
3. You will find the programm in „Launch Manager“.
4. You can determine which program will be started by the
respective button by means of the ‘Insert’ or ‘Delete’
control buttons.
Safety Handling Components Aid Appendix
5. Click on ‘OK’ to accept the setting, after you have selected
the relevant program.
V
IIEEWWSS OOFF TTHHEE
V
N
N
OOTTEEBBOOOOK
K
19
Page 26
SPECIAL FUNCTION OF THE MULTIMEDIA KEYS
This Notebook is supplied with an additional multimedia function
that will enable you to play photo slideshows, video DVDs, audio
CDs or MP3 files by pressing a key, without having to start the
Windows
Power Cinema’ program in the following section.
®
operating system. Read how you can use this ‘Linux
*
SWITCH POWER CINEMA ON AND OFF
You will switch the Notebook on an off with the help of the On/Off
Switch
shut down again at the same time.
Please proceed as follows to operate the Linux Power Cinema application:
1. You will start the Linux Power Cinema application with the
(3). The Windows operating system will be started or
hotkey P1 and the On/Off Switch
(3) at the same time
when the Notebook is switched off. The user interface,
which you will be able to operate with the aid of the remote of the multimedia keys, will appear after a short
time.
P1
The card reader card and the TV tuner will not be supported here.
*
20
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 27
2. Now, you will be able to insert a DVD or a CD and start the
desired playback with the corresponding Menu Point.
3. It is possible to leave the application in three ways:
a. Press the On/Off Switch
(3) of the Notebook briefly.
or
b. Press the Power button on the remote control.
or
c. Select the ‘Switch Off’ Menu point.
Safety Handling Components Aid Appendix
V
IIEEWWSS OOFF TTHHEE
V
N
N
OOTTEEBBOOOOK
K
21
Page 28
22
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 29
G
EETTTTIINNGG
G
Before you get started using your notebook, first take a few moments to read the important section on Safety.
This Notebook comes with software fully pre-installed. You do
not have to install any of the CDs supplied. However, with many
programs (e.g., telephone CDs or encyclopaedias) it is necessary
to insert the corresponding CD to access the data that is stored on
it. The software will prompt you to do this when necessary.
S
TTAARRTTEED
S
D
Step 1
• Before starting the Notebook please insert the battery.
1
Safety Handling Components Aid Appendix
If the battery level is insufficient, connect the
power adapter.
G
EETTTTIINNGG
G
S
TTAARRTTEED
S
D
23
Page 30
To open, use your thumbs to press the bar, then lift the
display with your thumbs and index finger and position it
as desired.
Switch the notebook on by pressing the on/off button (3).
The notebook will restart and go through various stages.
Note: Make sure there is no bootable CD (e.g.,
the Recovery CD) in the CD-ROM drive. Such
disks will prevent the operating system from
loading off the hard drive.
Your operating system is finished loading when a welcome screen is
shown on your display.
24
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 31
Step 2
The greeting procedure will guide you through a series of dialogue
boxes. The information in each dialogue box will explain the steps
that need to be taken.
Safety Handling Components Aid Appendix
Should you have any questions just click on
.
Enter Personal Details
In one of the initial start-up dialog boxes a request will appear on
the screen for you to enter your personal details. Please enter the
requested information in the white input fields. You can select the
fields by clicking on them with the mouse. When you press Enter,
or click on the Continue button you progress to the next window.
License Agreement
The greeting procedure also displays the license agreement. Please
read this carefully. It contains important legal information on the
use of your software. In order to see the full text, use the mouse
and the scroll bar on the right side of the screen to move downwards until you have reached the end of the document. You accept the agreement by clicking on the “I accept the agreement”
option field. Only by doing so will you be entitled to use the product under lawful terms and conditions and be entitled to open the
sealed Windows
Step 3
After the login procedure the Windows
screen. This can be adjusted so that the screen of your computer
looks different.
®
manual.
®
desktop appears on your
G
EETTTTIINNGG
G
S
TTAARRTTEED
S
D
25
Page 32
9
THE WINDOWS
®
XP DESKTOP
After the login procedure the Windows® XP desktop appears on
your screen. (Your desktop might not look exactly like the one
shown here.)
7
8
3
1
2
10
4
5
6
1. Start Button
Clicking the Start button brings up a menu where you can access help, software programs, files, and settings. For more information, click Windows
®
XP Tour on the Start menu.
2. Program Bar
The most commonly used software programs are listed here.
3. All Programs
All of the software programs installed on your Notebook are
ordinarily listed here. Click All Programs to reveal an extensive menu.
26
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 33
4. Information about your PC
Click this button to receive important information about your
Notebook as well as valuable hints and additional assistance.
5. Turn Off Computer
®
Click this button to shut down Windows
XP and the Note-
book.
6. Task Bar
Here you receive information and status reports about Win-
®
dows
XP and which programs are running.
7. Desktop Icons
Desktop icons link to their respective programs. To start a
program, double-click its desktop icon.
8. Logged in User
This tells you which user is logged in to your Notebook.
9. Control Panel
Safety Handling Components Aid Appendix
You can use the icons in Control Panel to change the appearance and functionality of Windows
®
XP. These icons represent
options for configuring your Notebook.
®
10. Windows
XP Help
Here you can find information on using your Notebook, networking, backup, and many other tasks.
G
EETTTTIINNGG
G
S
TTAARRTTEED
S
D
27
Page 34
28
V
IIEEWWSS
V
&
FFIIRRSSTT SSEETTUUP
&
P
Page 35
CChhaapptteerr 33
Safety Handling Components Aid Appendix
Main Components
Subject Page
Power Supply ................................................. 32
Display .........................................................37
Data Entry ..................................................... 40
The Hard Drive .............................................. 42
The Optical Drive ........................................... 44
The Sound Card ............................................ 49
Modem ........................................................ 52
The Network ................................................. 53
The Multimedia Card Reader ............................. 59
PCI Express/54 Connection .............................61
The PC Card Slot (PCMCIA) ............................. 63
TV Card .........................................................65
The Universal Serial Bus (USB) Port ................. 74
IEEE 1394 (FireWire) ....................................... 75
Bluetooth ...................................................... 76
Software ...................................................... 78
Page 36
30
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 37
P
OOWWEERR
P
S
S
UUPPPPLLY
Y
ON/OFF BUTTON
The On/Off button (3) is used to power up/down the Notebook.
T
Safety Handling Components Aid Appendix
The power supply indicator
status
puter using the operating system. This is the same as clicking Start
then Turn Off Computer. If the button is held down for longer than
4 seconds, it will force the notebook to power down without going
through the operating system shut down process. This may be useful
if your computer has crashed or stalled.
(Ö p. 16). Pressing the button briefly will turn off your com-
WARNING! Do not switch off your Notebook
while the hard disk or the optical drive is running and the corresponding media activity
LEDs are lit. Otherwise data may be lost. To
protect the hard disk you should always wait for
20 seconds after powering down the Notebook
before powering it up again.
gives information on the operating
P
P
OOWWEERR
S
S
UUPPPPLLY
Y
31
Page 38
POWER ADAPTER
Your Notebook is supplied with a universal AC power adapter,
which automatically adjusts to the available power source. The
following levels are supported: AC 100-240V~/ 50-60 Hz.
Please follow the power supply safety instructions found on
page 8.
The power adapter is connected via a power cord to an AC outlet.
The DC power lead from the power adapter is connected to the rear
side of the Notebook (
20).
The adapter provides the Notebook with power and also charges the
battery. The power supply indicators of the Notebook (see page 16)
provide details on the operating state. The battery is also being
charged when you are working on your Notebook with the power
adapter.
The power adapter is still live if the Notebook is not connected
with it. You should therefore unplug the power adapter from the
outlet if it is not connected to the Notebook.
WARNING! Use only the power adapter and
power cord supplied with your Notebook.
32
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 39
BATTERY OPERATION
In order to extend the life and power of your battery, and to guarantee reliable operation, it is essential that the safety instructions
on page 10 are followed.
INSERTING THE BATTERY
Slide the battery, as shown
into the battery compartment.
REMOVING THE BATTERY
To remove the battery,
press the safety catch at the
bottom of the notebook and
push the ejection bolt at the
same time.
Safety Handling Components Aid Appendix
WARNING! Do not remove the battery while
the Notebook is running on battery power.
You increase the possibility of losing data.
WARNING! Take care that the contacts at the
accumulator and the notebook computer are
not damaged or dirty when storing the accumulator or using the notebook. This could lead
to malfunctioning.
P
P
OOWWEERR
S
S
UUPPPPLLY
Y
33
Page 40
CHARGING THE BATTERY
The battery is charged via the power adapter. If the power
adapter is connected, it charges the battery automatically,
whether the Notebook is turned on or not.
When the Notebook is switched off, full charging takes a few
hours. If the Notebook is switched on, the charging process takes
a significantly shorter time. You will find the meaning of the load
checking display on page 16. However, it is recommended that
from time to time you discharge the battery completely and recharge it afterwards with the Notebook switched off. You can discharge the battery without losing data, if you turn your notebook
on without using any application and no power adapter. As soon
as the battery is empty your notebook will enter the hibernate
mode. We recommend doing this procedure every time you think
the battery power is losing efficiency. You will find the meaning of
the battery supply indicator
on page 16.
BATTERY POWER
A fully charged Li-Ion battery will provide power for several hours of
operation. However, the battery life will vary according to how the
power saving functions are set, the way you work, the size of the
main memory and the display type.
When working in Windows an audible warning alert will sound as soon
as the battery level drops below a set minimum value. When this happens, the processing power is reduced in order to save power.
NOTE: Battery warning signals and "Low-Battery"
mode will be heard immediately when the power
pack is first connected.
NOTE: For full battery performance please charge
and discharge the new battery two to three times
consecutively!
34
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 41
CHECKING THE BATTERY LEVEL
In order to check the current level of the battery, move the cursor
over the power symbol in the taskbar.
When in battery mode, a battery symbol is displayed and when the
power adapter is in use a power connector is displayed. If the battery
is being charged the power connector has a lightning symbol superimposed over it. Further information on power settings can be obtained by double clicking on the symbol.
Safety Handling Components Aid Appendix
WARNING! If the battery is empty, your data will
NOTE: If you ignore the warning signal when the battery level is low, your Notebook goes into suspend
mode. (Depending on the BIOS/OS setting this will be
Save-to-Disk or Save-to-RAM).
not be retained for long in Standby/Save-to-RAM
mode.
WARNING! Never remove the battery while the
Notebook is switched on or if the Notebook has not
yet gone into suspend mode, as this may lead to
loss of data.
P
OOWWEERR
P
S
S
UUPPPPLLY
Y
35
Page 42
POWER MANAGEMENT
Your Notebook offers automatic and modifiable power saving
functions that you can use to maximize battery life and reduce
overall operating costs. The power saving modes are known as
standby mode and suspend (hibernate) mode.
STANDBY MODE
When in standby mode, the contents of the RAM of your Notebook
are preserved while practically all other components of your Notebook are shut down, reducing your power consumption to a minimum. By pressing any key on the keypad, you can bring your
Notebook back to the fully operational state. You will restart at
precisely the line in which you were working prior to the interruption. The computer takes less time to go into and come out of
standby mode, but uses more power than suspend (hibernate)
mode.
SUSPEND (HIBERNATE) MODE
The hibernate mode is an alternative to a complete shutdown of
the Notebook. In this mode all data from RAM (system and
graphic data) are copied to the hard disk as a file. As soon as the
data has been safely saved, the Notebook powers down. When
the Notebook is switched on again, this file is written back to RAM
by the BIOS. In a few moments the Notebook is in the exact state
as when it was last used. If while working on a document the
Notebook is closed (assuming the correct ACPI setting), the Notebook saves the data in RAM for you automatically. You will restart
at precisely the line in which you were working prior to the interruption. The computer uses no power while it is in suspend (hibernate) mode, but it takes a little longer for the computer to go
into and come out of hibernation compared to standby.
36
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 43
D
IISSPPLLAAY
D
Unlike a normal monitor, the TFT display does not produce either
radiation or flicker.
Y
OPENING AND CLOSING THE DISPLAY
A display catch (10) keeps the display closed when the Notebook
is not in use.
To open, use your thumbs to press the bar, then lift the display
with your thumbs and index finger and position it as desired.
Safety Handling Components Aid Appendix
The opening and closing of the display can be assigned various
functions via the Power management feature. For example, the
Notebook can be programmed to power down when the display is
closed.
WARNING! The display should not be opened
fully to 120°. Do not try to forcibly open it.
SCREEN RESOLUTION
The integral screen has a native resolution of 1024 x 768 pixels.
Using a higher resolution can lead to distortion of the display,
especially with text. Using a lower resolution may cause the
display to use only a portion of the screen area.
D
IISSPPLLAAY
D
Y
37
Page 44
CONNECTING AN EXTERNAL MONITOR
The Notebook has a VGA port (22) for connecting an external
monitor. To connect and configure an external monitor:
1. Shut down your notebook.
2. Connect the video signal cable of the external monitor to
the VGA port of the Notebook
3. Connect the external monitor to the electrical socket,
power it up and start your notebook.
There are two options for setting up an external monitor:
1. Clone your Desktop
Press <Fn> + <F3> to activate the external monitor.
The notebook display will be switched off. Adjust the display settings following the external monitor specification.
Press <Fn> + <F3> once more and both displays are
switched on.
Press <Fn> + <F3> again to deactivate the external
monitor. The notebook display will be switched on.
2. Extend your Desktop
This option does not support the key combination <Fn>
+ <F3>.
(22).
Right click anywhere on your desktop and select “Properties” to start the "Display Properties" program.
• Select the "Settings" tab and left click on the second
display n.
• Check the option “extend my Windows desktop
onto this monitor” o and press “ok”.
38
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 45
• To deactivate the extension uncheck the option “ex-
tend my Windows desktop onto this monitor”.
n
o
You can change the resolution and colour depth for either display
in this screen. However, you may have to decrease the depth of
colour if you increase the resolution since the video memory has a
limited capacity.
CONNECTING A TV
The Notebook has a port (21) for connecting a TV. To connect
and configure the Notebook for a TV:
Safety Handling Components Aid Appendix
1. Shut down your notebook.
2. Connect the signal cable of the TV to the optional composite
video adapter provided with your notebook, then connect
the other end of the adapter to the TV out port
(21) of the
Notebook.
3. First turn on your TV, then turn on your notebook.
4. Switch on your notebook and boot it properly.
 If the option Extend Windows Desktop to this Moni-
tor in the program display properties is activated,
then it must be deactivated first in order to change
the display to the TV set.
D
D
IISSPPLLAAY
Y
39
Page 46
D
AATTAA EENNTTRRY
D
Y
THE KEYBOARD
By dual assignment of certain keys you have the same range of
functions available to you as with a normal Windows keyboard.
Some functions are input using the Fn key, which is normal on
notebook computers.
NOTEBOOK-SPECIFIC KEY COMBINATIONS
Combination Description
40
+
+
+
+
+
+
A list of the combinations is displayed.
Power saving functions. This key combination is set to
power down by default. To adjust this key to your own
needs go to display properties in power saving.
Toggles the display screen between LCD, external monitor
and simultaneous display.
Switches the backlight off to save power. Pressing any
key switches the backlight on again.
Switches the loudspeakers on / off.
Activates / deactivates the numeric keypad assignments
(the corresponding LED will light up).
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 47
Enables or disables the scroll function.
+
Executes function HOME.
+
Executes function END.
+
Reduces screen brightness
+
Enhances screen brightness.
+
Increases the volume
+
Decreases the volume.
+
TOUCH PAD
The touch pad’s primary function is to move the cursor around or
select items displayed on the screen with the use of your fingertip
instead of a mouse. It is positioned in front of the keyboard (3).
The pointer follows the direction which is specified by moving your
finger or thumb over the touch pad.
Safety Handling Components Aid Appendix
DO NOT use a ball-point pen or other object on the touch pad, as
this could damage or cause a malfunction of your touch pad.
Below the touch pad are the left and right mouse buttons which
can be used as on a normal mouse.
You can scroll over the screen with the control field (optional).But
you can also make a click or a double click directly with the
Touchpad, by giving its surface a light tap once or twice briefly.
You will find a wide number of useful settings that will make your
daily work easier under the ‘Mouse’ Point in the Windows
®
system
control.
If it is difficult for you to use the Touchpad, you can connect the
scroll mouse also supplied as an option to the USB Port.
D
AATTAA EENNTTRRY
D
Y
41
Page 48
T
T
The hard drive is the main storage medium combining large storage capacity and rapid data access.
The Windows operating system cannot use the full capacity of the
hard drive, which means that there will be a difference between
the capacity that the BIOS displays and what the operating system displays.
The hard drive contains the operating system of the computer, other
application programs and backup files. These programs and files are
pre-installed on your Notebook, so you may note that some of the
space on your hard drive is already taken.
Whenever the computer is accessing the hard disk, the corresponding LED illuminates
If you are looking for a file on the hard drive and you know the
name, go to Search on the Start menu to find the file. Following is
some general information on where you might find some common
files.
Usually your hard drive is divided into several partitions, as shown
below. The partitions of your hard drive may vary from what is
shown here.
H
HHEE
AARRDD DDRRIIVVEE
H
WARNING! Never switch off the computer
while the busy indicator is lit since this may
result in loss of data.
Local Disk C: Windows XP
BOOT D: Drivers for internal PC components
Recover E: Restore software
(see page 17.)
Software programs
Your documents
Installation files for software that came with
your PC
42
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 49
IMPORTANT DIRECTORIES
The most important directories preinstalled on your Notebook are
shown below. These directories may vary from what is shown
here.
Caution: Don't delete files unless you know what they are. Windows XP might require these files for your computer to operate
correctly. Also, do not alter or resize the partitions – this will
make it difficult to restore your Notebook to the factory settings.
C:\ This is the main hard disk drive partition for your Notebook.
It is where your program files, settings, and documents are
stored, as well as files necessary for running Windows XP.
C:\Program Files Includes files belonging to software pro-
grams.
C:\Windows The main directory for Windows XP.
C:\Documents and Settings Includes the settings and docu-
ments for all users.
D:\ Includes files for restoring hardware components and soft-
ware programs.
Safety Handling Components Aid Appendix
D:\Driver Drivers for internal Notebook components.
D:\Tools Includes installation files for software that came with
your Notebook.
E:\ Includes files for restoring the entire Notebook to working
order.
E:\Recover Includes the files needed to perform a system re-
store.
T
T
HHEE
H
AARRDD DDRRIIVVE
H
E
43
Page 50
T
T
HHEE
O
PPTTIICCAALL
O
D
D
E
RRIIVVE
CD-RW/DVD-ROM COMBO DRIVE
Your Notebook has a CD-RW/DVD-ROM combo drive. This drive
can play everything that a DVD-ROM drive can play: DVD movies,
music CDs, and data DVDs and CDs. It can also run software programs from CDs and DVDs. In addition, this drive can write data
and music CDs and copy CDs. It writes to CD-R or CD-RW.
HANDLING DISCS
To maintain the life of CD and DVD discs, observe these guidelines.
• Avoid radiation by direct sunlight (UVA/UVB).
• Avoid scratches and damage to the disc surface.
• Avoid extreme temperatures.
• Do not attach labels or paper to DVD discs.
• Do not use record-cleaning or anti-static agents to clean
your discs.
We also recommend that you avoid specially shaped discs such as
hearts or polygons, or discs that are not standard size. Do not use
warped or cracked discs as they may cause damage to your drive.
44
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 51
LOADING A DISC
 Tip: Do not place protective foils or other stickers on
your CD’s. To avoid damage to your drive, do not use
deformed of damaged CD’s. Attention: Do not use
scratched or dirty disks, discs with pieces broken off
or disks of poor quality. Because of the high speeds in
the drive the disks might break and damage your data
as well as your drive. Examine the disks before you
enter them. If damage or dirt is visible, you should
not use them. Damage caused by faulty media is excluded from warranty and their repair must be
charged.
1. Press the eject button on the front of the drive to open the tray.
2. Place the disc on the tray so that it lays flat with the label facing upward.
Safety Handling Components Aid Appendix
3. Gently push the tray in to close it.
Many discs automatically start when they are loaded and launch a
playback software program. In some cases you might need to
start a program (for example, a DVD player program).
T
O
HHEE
T
O
PPTTIICCAALL
D
D
RRIIVVE
E
45
Page 52
EMERGENCY EJECTION OF A BLOCKED DISC
If the tray fails to open automatically, then the tray can be
opened manually provided there is an opening for emergency
ejection
(14).
Restart your notebook and if the tray is still locked proceed as
follows:
1. Shut down Windows and switch off your notebook.
2. Insert a long thin object (like a straightened paper clip) into
the emergency ejection opening
(14) until you feel resistance.
3. Press lightly and the tray will open.
4. Remove the disc and restart the notebook.
PLAYING MUSIC CDS
Windows Media Player and MusicMatch Jukebox can be used to
play music CDs. Please refer to the documentation for these programs to decide which program you would like to use.
PLAYING DVD MOVIES
To play DVD movies on your Notebook, you need a DVD playback
software program, such as CyberLink’s award-winning PowerDVD.
To play DVD movies using this software, insert a movie DVD into
the DVD-ROM or DVD-RW drive, then click Start, then All Pro-
grams and select PowerDVD.
In spite of the high storage capability of the DVD, the data must
be extremely compressed in order for a complete feature film to
be stored. This extreme compression combined with exceptional
picture quality is provided by the MPEG2 image coding method on
the DVD. This places high demands on the Notebook’s processor,
so when playing a DVD please close all other applications. To increase Notebook performance, you may also wish to purchase a
plug-in MPEG2 decoder card, which has its own decompression
processor and will thus free the Notebook’s processor.
46
NOTE: The decoding software included with your
Notebook may be changed for regional DVD decoding up to five times, after which the drive will
only play DVD movies for the region setting last
entered.
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 53
WRITING CDS
You can use your CD-RW/DVD-ROM combo drive to write ("burn")
data and music CDs.
A data CD is a compact disc (CD) used to store PC data (for example, files and folders you have on your hard disk).
A music, or audio, CD is a compact disc (CD) used to record music
that you can play on your home or car stereo CD player. Using a
CD-R instead of a CD-RW for music CDs will help ensure a greater
level of compatibility with conventional CD-players.
There are several different options for burning CDs. The first step
for using any of these options is to insert a blank recordable CD
into your combo drive.
Nero Burning ROM can create different types of audio, video, and
data CDs quickly and easily. Click Start, then All Programs, then
Nero, then Nero OEM to access Nero Burning ROM. Follow the
step-by-step instructions given by the software wizard to create a CD.
Windows XP includes functionality for quickly and easily creating
data CDs:
1. Select the files or folders you would like to write to your CD.
To select more than one file, hold down the CTRL key while
you click the files you want.
2. In the File and Folder Tasks menu on the left (Picture Tasks if
the files are located in My Pictures), click Copy this file, Copy
this folder, or Copy the selected items. If you do not see
the File and Folder Tasks menu, select Tools on the main
menu, then Folder Options. Under Tasks on the General tab,
select Show common tasks in folders.
3. In the Copy Items dialog box, click the CD-RW, and then click
Copy.
4. Double-click My Computer, then the CD-RW. Windows displays a temporary area where the files are held before they
are copied to the CD. Verify that the files and folders that you
intend to copy to the CD appear under Files Ready to be Written to the CD.
Safety Handling Components Aid Appendix
T
O
HHEE
T
O
PPTTIICCAALL
D
D
RRIIVVE
E
47
Page 54
5. Under CD Writing Tasks, click Write these files to CD. Windows displays the CD Writing Wizard. Follow the instructions in
the wizard.
Music jukebox and media player programs (such as Windows Media Player) often offer alternatives for burning audio CDs. Refer to
the help within the program for more information.
You can also purchase third-party CD burning software for writing
files to a CD-R or CD-RW disc.
More information about copying CDs reliably can be found in the
“Technical Reference” section of this manual under “CD Facts.”
WARNING! Unless you own the copyright or
the permission of the owner of the copyright,
unapproved copying of copyrighted CDs or DVDs
violates national and/or international laws and
can result in serious punishment.
48
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 55
T
T
Your Notebook has an integrated stereo sound card (on-board)
with 16-bit and 3D spatial sound effects (3D). The sound card is
compatible with the industry standard Sound Blaster and Micro-
soft Sound System Version 2.0. This guarantees optimal support for all popular programs and games.
If you wish to alter the base volume, click on the loudspeaker
symbol in the task bar. A double click opens the sound mixer.
By using the key combinations Fn + Ç and Fn + È you still have
the possibility to regulate the volume.
HHEE
S
OOUUNNDD
S
C
C
AARRDD
EXTERNAL AUDIO PORTS
Your Notebook has a loudspeaker, so you can always playback
sounds without additional equipment. The connection of a Hi-Fi
system increases the sound quality significantly. The use of the
external connections gives you a good opportunity to connect your
notebook to external devices.
Safety Handling Components Aid Appendix
T
T
HHEE
S
S
OOUUNNDD
D
C
AARRD
C
49
Page 56
Microphone In
(23)
Digital audio output
(SPDIF optical)
(28)
Audio In
(29)
For recording via an external microphone.
For sound reproduction via external stereo
equipment such as loudspeakers (active)
or headphones.
Connection to an external sound system
via an optical cabel (available separately
at a specialist shop).
Connection to an external sound sytem.
By using the external connections you have the possibility to connect
your notebook with external appliances.
If the external audio links have a dual function, then your notebook is equipped with a surround sound system. The bundled
software allows you to make the necessary settings:
1. Click the following symbol in the taskbar:
50
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 57
The help program for the audio configuration is now invoked. A
large number of settings can be carried out with this.
It is also used to set the loudspeaker configuration you are going
to use for the surround sound.
Click the “Sound effect” tab to set the system for your needs.
Four configurations modes are available to you:
- headphones
- 2-channel mode for stereo loudspeaker output
- 4-channel mode for 4 loudspeaker output
- 6-channel mode for 5.1.-loudspeaker output
Overview:
Configuration of
speakers
2-channel mode* Audio out
4-channel mode
6-channel mode Audio out
Port at the
notebook
Audio out
Audio in
Microphone in
Function
Ö
Loudspeaker output
Ö Ö Loudspeaker output front
Loudspeaker output back
Loudspeaker output front
Ö
Ö
Loudspeaker output back
Ö
middle/Subwoofer Out
* Your notebook is factory set to 2-channel mode.
Safety Handling Components Aid Appendix
T
T
HHEE
S
S
OOUUNNDD
D
C
AARRD
C
51
Page 58
M
M
The modem is fitted with an RJ-11 interface, into which a standard telephone lead can be plugged.
M
OODDEEM
WARNING! Use only with an analogue telephone line. The modem cannot withstand the
voltage levels of digital telephone systems
such PBX or lines such as ISDN or Broadband
services.
MODEM PORT
Insert one end of the RJ11-connection (telephone plug connector)
into the modem/network interface
logue telephone socket that is easily accessible.
(24) and the other into an ana-
52
NOTE: Do not place the Notebook in Suspend
(or Sleep) mode if you are connected to your
Internet provider, since this will cause the modem connection to be lost.
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 59
T
T
HHEE
N
EETTWWOORRK
N
K
WHAT IS A NETWORK?
A network means connecting your Notebook to one or several
other computers. Users can transfer data between computers and
share resources such as printers, modems and hard disk drives.
Here are some practical examples:
• You can exchange E-mail and manage appointments in an office.
• Users can share a printer in a network and save their data on
a central server.
• Users can share one modem among computers for Internet
access.
• Two or more computers can be connected to play network
games or share data.
Safety Handling Components Aid Appendix
T
T
HHEE
N
EETTWWOORRK
N
K
53
Page 60
FAST ETHERNET-NETWORK
Your PC has a Fast Ethernet Network connection. You can use this
to connect to a network.
Connect one end to the RJ45 connection (Western plug) at the
network interface of your Notebook
another PC or a hub/switch.
The Windows XP Help and Support Centre offers extensive information about networking your PC. You can access this information
by clicking on Start, then Help.
(25) and the other to
54
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 61
WHAT DO YOU NEED FOR NETWORKING?
Some requirements have to be fulfilled to successfully network
computers:
1. The Notebook must have a network card that supports the
same network technology as the other computers on the network. Unless otherwise quoted, your Notebook will support
the current Fast Ethernet (10/100 Mbit) standard.
2. The network cards must be connected. You need a Shielded
Twisted Pair-cable (CAT5) that has an RJ-45-connector.
- If you want to directly connect two PCs you need a Cross-
Link cable.
- If more PCs must be connected you need a supplementary
distributor (Hub or Switch) and a Patch cable.
Safety Handling Components Aid Appendix
3. All connected PCs need a network operating system. Windows
®
can act as a network operating system.
4. All networked PCs must speak the same “language” to understand one another. They use protocols for this purpose. The
setting of protocols, therefore, must be the same for all networked PCs.
T
T
HHEE
N
EETTWWOORRK
N
K
55
Page 62
TROUBLESHOOTING WITHIN THE NETWORK
Why does an error message appear when I click on the
network environment?
The computer name must be unique on the network and may not be the same as the task group.
It appears that the network boards are unable to communicate. What might be the problem?
Maybe one of the used network boards works with a
different speed (e. g. 10 instead 100 Mbit) and
your network computer is unable to recognize this.
If necessary, set the network driver to the compatible speed.
If two PCs should be linked you require a cross-
link cable, otherwise use a patch cable.
In addition, check the protocols and the configu-
ration.
The data transmission is incorrect or very slow. What
might be the problem?
Maybe you have the wrong cable (UTP / CAT3 or
lower) or the problem is the proximity of a power
cord or another source of interference.
For further hints on troubleshooting search for “network errors” in
Windows Help and Support.
56
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 63
WIRELESS LAN
Wireless LAN is an optional feature. This function allows you to
create a wireless network link with an access point or directly with
another wireless-enabled PC.
Using the hotkey
function and the corresponding LED for WLAN
appears on your screen.
you can enable or disable the wireless LAN
(Ö p. 16)
Safety Handling Components Aid Appendix
 ATTENTION: Make sure the Wireless LAN option is
switched OFF in any environment where it might interfere with critical and sensitive devices, e.g., on
aircraft, in hospitals and other medical centres, etc.
T
T
HHEE
N
N
EETTWWOORRK
K
57
Page 64
CONDITIONS
An access point is a wireless transmitter that communicates with
your notebook and controls access to the network connection
(e.g., a home network or a broadband connection such as DSL).
Wireless access points are often found in offices, airports, universities or Internet cafés. They offer access to networks or to the
Internet. Access authorizations are normally needed. A fee may
be required to use a public access point.
To set up a wireless network to share Internet access, files, and
printers at home, you will need an access point, a router, and a
broadband (DSL or cable) modem. Some access points can also
serve as a router and/or a broadband modem. Check with your
retailer or Internet Service Provider to find the best solution for
your needs.
A link to another computer with wireless LAN functionality can
also be created without an access point. This will allow you to
share files, but you will need an access point and a router to
share an Internet connection.
The wireless network link works according to standard IEEE
802.11g which is also compatible with the IEEE 802.11b standard. The standard 802.11a is not supported.
If encrypted transmission us used, this must operate according to
the same principle on all devices. Encryption is a method of
protecting the network from unauthorized access.
The transmission speed (max. 11 Mbps) can vary according to the
distance and loading of the partner.
58
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 65
T
T
Memory cards are media that are being used for a variety of purposes, especially in digital photography. They are increasingly
replacing the floppy disk. The form and capacity of a memory card
can vary according to the manufacturer.
Your notebook supports the following formats:
When inserting memory cards, ensure that the contacts are facing
the right way. See table below. Incorrect insertion of a card can
cause damage to the card reader and/or the card.
M
HHEE
UULLTTIIMMEEDDIIAA
M
• XD Card
• MMC (MultiMediaCard)
• SD (Secure Digital)
• Memory Stick / Memory Stick Pro
Slot Card type Contacts
Multimedia card
reader (15)
C
C
XD Card
SD (Secure Digital)
MMC (MultiMediaCard)
Memory Stick
Memory Stick Pro
AARRDD
R
EEAADDEER
R
R
pointing downwards
pointing downwards
pointing downwards
pointing downwards
pointing downwards
Safety Handling Components Aid Appendix
T
HHEE
T
M
UULLTTIIMMEEDDIIAA
M
C
AARRDD
C
R
EEAADDEER
R
R
59
Page 66
INSERTING MEMORY CARDS
 Memory cards can only be installed in one direc-
tion. Refer to the instructions on the previous page.
 Remove the dummy card from the PCMCIA Slot be-
fore installation. Replace the card to protect contacts against dirt if the Slot is not used.
Push the memory card into the slot until it clicks into place.
REMOVING MEMORY CARDS
To remove the SD/MMC-cards or memory sticks press the card
further into the slot. Then pull out and remove the card.
60
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 67
T
HHEE
T
Your notebook supports the PCI Express standard.
Both PCI Express/34 and PCI Express/54 cards (the naming refers
to the sizes of the cards) are available on the market. Your notebook supports the card format PCI Express/54.
PPCCI
I
E
E
XXPPRREESSS
S
4
//554
C
OONNNNEECCTTIIOON
C
N
INSTALLING PCI EXPRESS CARD/54
 Note: Please always read the instructions that
come with your PCI Express card before installation.
Safety Handling Components Aid Appendix
T
T
HHEE
PPCCI
I
E
E
XXPPRREESSS
S
//554
4
C
OONNNNEECCTTIIOON
C
N
61
Page 68
REMOVING PCI EXPRESS CARD/54
Please take note of the following before removing the PCI Express
card:
• Terminate the program which you used with the card.
• Left-click on the icon Safely Remove Hardware
in the
taskbar, select the card and click on Stop.
In order to remove the card, first push it into the contact to
unlock it. Pull the card from the bay and store it securely.
62
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 69
T
HHEE
T
(Optional feature) The PC card slot (17) of the Notebook can be
used to operate credit card-sized PC cards. Most PC cards are
communications or interface devices such as ISDN-, Faxmodem-,
Network- or SCSI-adapters.
Some PC cards contain memory chips or hard disks for data storage. If you use such cards with your Notebook, the system assigns the card a drive name, so that you may access the resources. The PC card drive in your Notebook supports PCMCIA 2.1
- (Type II), and CardBus (Type I) cards. Cards of Type I are 3.3
mm, and Type II 5 mm thick.
PPCCMMCCIIA
A
C
C
AARRDD
S
S
LLOOTT
32-BIT CARDBUS PORT
CardBus cards have a 32-bit architecture with which high data
transfer speeds of up to 132 MB can be achieved, similar to PCI.
In this way your Notebook can also support data intensive devices
such as 100Mbps Fast Ethernet, Fast SCSI peripherals and video
conferencing devices.
The CardBus port is backward compatible with 16-bit PC cards
with a 5V power supply, though the CardBus only requires a
power-saving 3.3V.
Safety Handling Components Aid Appendix
USE OF PC-CARDS
In order to run a PC card, special software is needed (drivers,
etc.). The card manufacturer usually supplies this software. Support for the card port is a component of Windows
represents the optimum in operational smoothness. You should
consider this point when choosing between alternative operating
systems.
T
T
HHEE
PPCCMMCCIIA
A
C
AARRDD
C
S
S
LLOOT
T
®
and at present
63
Page 70
INSTALLING A PCMCIA CARD
Follow the PC card installation instructions that are given for use
under Windows
 Remove the dummy card from the PCMCIA Slot be-
®
and have the necessary driver software ready.
fore installation. Replace the card to protect contacts against dirt if the Slot is not used.
Once you have started Windows®,
slip the card carefully into the slot
provided. When the card is fully
inserted two audible signals will be
heard, provided it has been correctly
recognized and successfully
configured.
If only one signal is heard, this
signifies a problem with the
card recognition. In this case,
follow the instructions that
accompany your new PC card.
REMOVING A PCMCIA CARD
To remove your PCMCIA card:
1. Press the eject button next to the slot.
 Attention! The Eject Button should be pressed in
during transportation, because the danger will arise
that the button will break off otherwise.
64
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 71
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
L
TV CARD
Your TV card possesses the following connections:
Ref. Name Function
n o p
Safety Handling Components Aid Appendix
s
r
q
n
o
p
q
r
s
Antenna connection For radio reception
Antenna connection For TV reception
DC In To power source
Video IN S-Video
Video IN Composite
Audio input (Aux)
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
For recording and if
necessary processing video
data (e.g. camcorder, ...)
For feeding external
analogue audio sources
L
65
Page 72
REMOTE CONTROL
This wireless remote control set controls the Power Cinema program on your notebook. In order for this to work, the following
requirements must be met:
- The notebook must be booted up.
- Windows® XP must be fully loaded.
- The driver software must be installed *.
- Power Cinema installed *.
- The receiver is connected to a USB port.
* All these conditions are met in the delivered state.
INSERTING BATTERIES
1. Turn the remote unit round.
2. Remove the cover of the battery compartment by pushing it
in the direction indicated.
3. Remove the used batteries if necessary and dispose of them
properly.
4. Place in two new type AAA (round cell) batteries.
5. Replace the cover of the battery compartment by pushing it
in the direction indicated.
66
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 73
BUTTON LAYOUT
TV
Video
CD/
DVD
Audio
Radio
On / Off
View and record
television programs.
View video recordings.
Playback music
CDs, video disks
and DVDs.
Start video text
application.
Open music archive.
Listen to and record radio programs.
Safety Handling Components Aid Appendix
EPG function (Electronic Program Guide)
Open photo archive.
Application-related information function.
Start Selection Menu of the application run-
Photo
Info
Menu
ning.
Press Scrolling
Wheel
= OK
Back
 Information: The functions described here are
You select the required function with these
navigation Buttons. The selection indicator will
move in the appropriate direction. The Scrolling Wheel can be turned up or down. Press
the Scrolling Wheel to confirm your selection.
Reverts to the point selected previously.
standard functions.
These Buttons can differ according to the operating
mode (TV, video, photo, etc.).
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
L
67
Page 74
+
Press to increase the vol-
ume; press
to lower the volume.
The D-Button lights up if a Button on the remote is
operated. It serves to select certain functions.
+
Press to select the next channel (TV, radio).
You select the previous channel with .
Mute Switch (Switches the sound output off).
Selects the TV channel used last.
Special function Button (e.g.: Selection of the audio
track)
68
Special function Button (e.g.: Subtitle selection)
Special function Button (e.g.: Camera selection)
Special function Button (e.g.: Chapter selection)
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 75
Ends the playback/
recording
Safety Handling Components Aid Appendix
Pauses the playback at the selected point.
Starts playback.
Previous title/images
Snapshot from
the current
channel
Next title/images
Rewind
Start recording
Fast forward
Direct selection of the TV channels
by means of numbers. Number entry in the case of some functions
(video text, etc.).
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
L
69
Page 76
INSTALLING THE USB REMOTE CONTROL RECEIVER
It does not matter if the notebook is switched on or off when you
connect up the remote control receiver.
The necessary driver software is already installed on your computer.
1. Boot up your notebook and wait for Windows
2. Insert the USB plug of the remote control receiver in a free
USB slot.
3. Your notebook will automatically detect the new device and
automatically integrate it provided that the driver has been
installed (delivered state).
4. You can now use the remote control to operate the Power
Cinema program.
CHANGING THE TRANSMISSION/RECEPTION CHANNELS
If several computers with remote controls are set up in close
proximity of each other (approx. 10 metres), this can lead to
disturbance. This can be remedied by choosing different channels.
Only reset the remote control in case of disturbances.
Proceed as follows:
1. Start the program Power Cinema in the program folder
Home Cinema.
2. Choose the menu item Settings and in the following
screen Set Remote Control Channel.
®
to load fully.
3. Detailed instructions on how to set the channel for the re-
mote control will appear on screen. Follow the onscreen instructions.
70
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 77
OPERATION
The TV card fits into the PCMCIA bay of your notebook (17).
 The TV card can only be installed in one direction.
Do not insert the card into similar bays. This might
cause damage to the notebook or the card.
INSERTING THE TV CARD
 Remove the dummy card from the PCMCIA Slot be-
fore installation. Replace the card to protect contacts against dirt if the Slot is not used.
1. After Windows® has started carefully insert the card into the
appropriate bay. When the card is fully inserted, two short
signal tones will be played to confirm successful installation.
2. Now connect one end of the supplied USB cable to the TV
card and the other end to a free USB port of your notebook.
This serves as an additional power source and must always
be connected when the TV card is used.
3. To setup the TV card start the application for TV reception. An
installation assistant will guide you through the program.
REMOVING A PC CARD
Remove the TV card in the following manner:
Safety Handling Components Aid Appendix
1. Disconnect all cables.
2. Remove the TV card and store it in a safe place.
 Remove the TV card by simply pulling it.
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
L
71
Page 78
CONNECTIONS
An additional 75 Ohm coaxial antenna cable is required to enable
TV / radio reception
1. Connect the coaxial antenna cable with the antenna connector
(o) for TV reception and wit the antenna connector (n) for radio
reception.
2. Connect the other end of the coaxial antenna cable to an aerial
antenna or to cable TV.
 Attention: It is important that you pull out the an-
tenna cable, when the device is not in use, especially during thunderstorms. In this way you protect
your device from a potential power surge caused by
lightning.
You will also be able to view your channels through DVB-T*, if you
connect the optionally additionally supplied rod antenna to the
antenna connection for the TV reception to do this. We recommend the connection of an external antenna that you can purchase in the specialist shop, if the signal received is too weak.
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
*
Provided that DVB-T or digital services are offered at the respective location.
72
Page 79
WATCH TV
If you want to watch TV with your notebook you need special
software. This is already installed and can be found in All Pro-
grams, Home Cinema.
The following table gives a summary of this program group:
Medi@show For showing presentations
Power Cinema SE For playing TV, videos, photos,
films and music
Power Director For processing videos
Power DVD For playing DVDs
Power Producer For putting together your own
DVDs from films and photos
You will find additional help by pressing the F1 key.
The execution of an autoscan will be necessary to watch TV. You
will start the scanning procedure by selecting Settings Ö Auto-
scan.
You can control the program with the remote control.
Caution: Audio and video recordings can occupy a lot of memory
(up to 2.4 GB per hour). We recommend that you save your audio
and video recording files to rewriteable media or save them on
the directory D:.
Safety Handling Components Aid Appendix
V
CCAARRDD WWIITTHH RREEMMOOTTEE CCOONNTTRROOL
TTV
L
73
Page 80
U
NNIIVVEERRSSAALL
U
USB ports provide an easy way to connect many peripheral devices to your PC. You can use any USB device with any USB port.
3 USB ports are located on the back panel for your convenience.
Some USB devices require that you reinstall software drivers
when you connect the device to a different USB port than the one
originally used. This can be avoided by always using the device
with the same USB port. Devices connected directly to the USB
bus should not draw more than 500 mA. Should the devices need
more power than this, it will be necessary to provide a powered
hub. The data transfer speed is 1.5 Mbit or 12 Mbit, depending on
the device connected
S
EERRIIAALL
S
.
B
UUSS
B
((UUSSBB)
)
P
P
T
OORRT
74
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 81
®
E
IIEEEEE
The IEEE 1394 (also known as iLink® or FireWire®) port (26) provide an easy and high-performance way of connecting high-speed
storage, imaging, and many new types of audio/video devices
easily.
1133994
4
F
((F
E
IIRRE
W
W
E
IIRRE
®
))
Safety Handling Components Aid Appendix
IIEEEEE
E
1133994
E
4
F
IIRRE
((F
W
W
IIRRE
E
®®))
75
Page 82
B
LLUUEETTOOOOTTH
B
Bluetooth wireless technology is designed to replace cables between devices, such as printers, keyboards, and mice.
Bluetooth wireless technology operates over a short distance. Bluetooth devices use radio transmission, which enables computers,
mobile phones, printers, keyboards, mice, and other devices to
communicate with each other without cables.
There are several uses for Bluetooth wireless technology, including, but not limited to:
• Creating a wireless connection to the Internet with a mobile
phone or a modem server
Transferring files between computers or between a com-
•
puter and another device
Printing to a Bluetooth wireless printer.
•
• Using a Bluetooth wireless keyboard and mouse.
Joining a personal area network (PAN).
•
Synchronizing a personal digital assistant (PDA) to a com-
•
puter or another device using Bluetooth wireless technology
The data transfer speed for Bluetooth wireless technology can be
up to 700 kilobits (Kbps) per second. The data transfer speed can
vary depending on the device or environmental factors. A Bluetooth device can transmit through walls, pockets, and briefcases.
Since Bluetooth is using the same frequency range as WLAN, simultaneous use might cause interference.
If this should happen you can disable one service temporary.
H
.
.
.
76
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 83
Using the hotkey
(Ö p. 18) you can enable or disable the Blue-
tooth function and a corresponding message appears on your.
Safety Handling Components Aid Appendix
 ATTENTION: Make sure the Bluetooth option is
switched OFF in any environment where it might interfere with critical and sensitive devices, e.g., on
aircraft, in hospitals and other medical centres, etc.
B
LLUUEETTOOOOTTH
B
H
77
Page 84
S
OOFFTTWWAARRE
S
There are many kinds of help and information for using your PC.
This section tells you where to get help with the Microsoft
®
dows
XP operating system, software programs, and the Medion PC.
E
®
Win-
GETTING TO KNOW WINDOWS XP
WINDOWS
This printed manual provides general information about the operating system. We recommend that all beginning users or users of
previous versions of Windows
found with the CDs in the accessory box that came with your PC.
WINDOWS
Windows® XP includes a tour that you can take to familiarize yourself
with the operating system. This tour can usually be found by clicking
on the Start menu. You can also find the tour by selecting All Pro-
grams, then Accessories.
MICROSOFT
Training is the most powerful way to acquire skills that help you
perform a specific task efficiently. On the Start menu, choose All
Programs, choose Accessories, and then choose Microsoft
Interactive Training.
WINDOWS
®
XP MANUAL
®
read this information. It can be
®
XP TOUR
®
INTERACTIVE TRAINING
®
XP HELP AND SUPPORT
®
An answer to almost every question can be found in this program.
You’ll find it in the Start menu.
78
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 85
SOFTWARE HELP
Many software programs incorporate extensive help functions. As
a general rule, you can access help functions by pressing F1 on
the keyboard. Many software programs include Help as an option
on the menu at the top of the screen or window. They may also
provide an icon (or icons) with a question mark on them that you
can click to access more information.
The software included with the Notebook was pre-installed at the
factory.
During software installations, important files can be changed or even
deleted. Medion recommends that you set a Windows
®
XP recovery
point before installing software (p. 64).
For specific installation information, refer to the documentation
that came with the software program. Here is a typical installation
procedure.
1. Load the software program installation disc in the combo
drive.
2. Most installer programs start automatically after a few
moments.
If the installer program does not start automatically, you can
manually start it by double-clicking My Computer, and then double-clicking the drive letter where you loaded the software program installation disc.
Safety Handling Components Aid Appendix
3. Follow the instructions given by the program.
DEVICE DRIVERS
If you install external devices, such as printers or digital cameras,
you may also need to install device drivers. The drivers will be included with your peripheral devices. These are occasionally updated
by the manufacturer. Check with the manufacturer of your peripheral device to find out if you have the most recent version of your
device drivers.
S
OOFFTTWWAARRE
S
E
79
Page 86
INFORMATION ABOUT YOUR PC
Clicking on Start and then on Information about your PC will
bring up more extensive information about your PC, as well as
useful links to software tools and other resources. It also contains
any last minute information about your PC that may not be included in this manual.
DIGITAL SIGNATURES
When installing software or drivers, you may receive the message
“The software you are installing has not passed Windows Logo
testing to verify its compatibility with Windows XP.” Although the
software lacks the digital signature, it may work properly. Click on
“Tell me why this testing is important” to get detailed information.
Click on “Continue Anyway” to continue to install your software.
To set file signature verification options for Windows XP:
1. Click Start, then Control Panel. Double-click System.
2. On the Hardware tab, select Driver Signing.
3. Under File Signature Verification, select one of the
following:
Ignore allows all device drivers and software to be installed
on this PC regardless of whether they have a digital signature.
Warn displays a warning message when you attempt to install
a software program or device driver without a digital signature.
Block prevents installation programs from installing device
drivers without a digital signature.
If you are logged on to your PC as an administrator, you can click
Apply setting as system default to apply the selected setting
as the default for all users of your PC.
WARNING! During software installation important files can be changed or deleted. To
avoid problems in using older files after installation, make sure to safeguard your hard disk.
80
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 87
WINDOWS ACTIVATION
Microsoft is committed to the protection of intellectual property
rights and the reduction of software piracy. Windows XP contains
software-based product activation technology. Your copy of Windows XP has already been activated for your Notebook. However,
product activation is needed if some components of your Notebook have been replaced or you use non-authorized BIOS. If necessary, you can activate Windows XP as often as needed.
You will probably need to activate Windows XP by telephone even
if Internet Activation is available. This is due to the pre-activated
SLP version that runs with a special Product-ID. However, activation needs your unique Product ID that can be found on the Cer-
tificate of Authenticity sticker on your Notebook housing. When
you call, please inform the agent that you are running an OEM
(SLP) version of the software.
THE BIOS SET-UP-PROGRAM
In BIOS setup (Basic Configuration) there are a number of configurable parameter settings available for your Notebook. For example, you can change the operating mode of the interfaces, security
features or power management.
Safety Handling Components Aid Appendix
WARNING! The Notebook is factory pre-set to
guarantee optimum operation. Only modify the
parameters if necessary and if you are familiar
with the configuration options.
RUNNING THE BIOS SET-UP
You can only run the BIOS configuration program at system startup. If the Notebook has already started, power it down and then
up again. Press the F2 function key in order to start the BIOSSET-UP.
S
OOFFTTWWAARRE
S
E
81
Page 88
NAVIGATING THE BIOS UTILITY
There are six menu options: System Information, Basic System
Settings, Start up Configuration, Onboard Devices Configuration,
System Security and Load Default Settings.
To enter a menu, highlight the item using the cursor up/down
keys; then press Enter.
While in a menu, follow these instructions:
- Press the cursor up/down keys to move between parameters.
- Press the cursor left/right keys to change the value of a pa-
rameter.
- Press Esc while you are in any of the menus to return to the
main menu.
Note: If you are unsure if your parameter settings are correct, you should load the "Set-up-
Defaults".
82
M
M
AAIINN
C
C
OOMMPPOONNEENNTTS
S
Page 89
CChhaapptteerr 44
Safety Handling Components Aid Appendix
First Aid
Subject Page
FAQ............................................................... 85
Data and System Security ................................ 87
System Recovery ............................................90
Troubleshooting .............................................. 94
Maintenance ................................................... 97
Page 90
84
F
IIRRSSTT
F
D
A
IID
A
Page 91
Q
FFAAQ
–
F
RREEQQUUEENNTTLLYY
–
F
When do I have to activate Windows?
Your software has been preactivated in the factory.
An activation will only be required, if ...
... several components are replaced by others.
... your installed a new motherboard.
... a different BIOS version has been installed.
... you install the software to another computer.
What is the Windows activation?
Your operating instructions include a chapter about
this subject.
A
A
SSKKEEDD
Q
UUEESSTTIIOONNSS
Q
Safety Handling Components Aid Appendix
How do I perform a data backup?
Use the program Backup for this.
It is important that you follow the operating instructions of these programs.
Make a backup and another backup of selected data
to an external medium (CD-R, CD-RW, DVD-R, DVDRW, SD card, etc.), to familiarize yourself with the
technique.
A backup is unsuitable if you are not able to recover
the data, the medium (floppy disk, CD-R, etc.) is
defective or no longer available.
Q
FFAAQ
–
F
RREEQQUUEENNTTLLYY
–
F
A
A
SSKKEEDD
Q
UUEESSTTIIOONNS
Q
S
85
Page 92
Do I still have to install the enclosed CDs/DVDs?
No. Basically all programs are already preinstalled.
The disks are only intended as backup copies.
When is the recovery of the factory setting recommended?
This method should be chosen as the last resort.
Read chapter “System recovery” on page 90 concerning the possible alternatives.
Why is the boot partition missing when booting from
the support/ application CD?
The first partition is formatted with the file system
NTFS. Compared to FAT32 this file system offers
more security and a more efficient access. However,
NTFS partitions can only be read from operating systems supporting this. This is not the case in the
aforementioned CD.
86
F
IIRRSSTT
F
D
A
IID
A
Page 93
D
AATTAA AANNDD
D
The programs described below are part of your Windows operating
system. You will find additional information on these programs in the
Windows Help file.
S
YYSSTTEEMM
S
S
EECCUURRIITTY
S
Y
DATA SECURITY
Back up data regularly on external media such as a CD-R or CD-RW.
Windows offers both a Backup program and a Files and Settings
Transfer Wizard.
Both programs are found in Accessories/System Tools within the Start
menu. You should make a backup disk with all your passwords and the
operating system’s original configuration.
MAINTENANCE PROGRAMS
You can avoid some hardware and software errors with disk maintenance
programs such as Disk Defragmenter and Disk Cleanup. The program
System Information can also be helpful since it gives you detailed information about your system configuration. You will find these programs
in Accessories/System Tools.
PASSWORD RESET DISK
To protect individual user accounts from complications resulting from
lost passwords, users should create a password reset disk and keep
it in a safe place. Windows Help describes how to create a password-reset disk.
Safety Handling Components Aid Appendix
D
AATTAA AANNDD
D
S
YYSSTTEEMM
S
S
S
EECCUURRIITTY
Y
87
Page 94
WINDOWS
®
UPDATE
Windows Update is the online updating of Windows. Use Win-
dows Update to download elements such as security updates, important updates, the newest help files, drivers and Internet products from the Internet.
The website is regularly augmented by new content, so that you
can download the newest updates and error corrections at any
time, to protect the Notebook and guarantee its functioning.
Windows Update will search through the Notebook and provide a
list of individual updates specially for the configuration of your
Notebook.
Each update that Microsoft regards as important for the operation
of the operating system, programs or hardware components will
be classified as an “important update” and automatically selected
for installation for you.
Important updates will be provided to remove known problems
and to protect the Notebook against known security risks.
Carry out four simple steps, to download the updates needed and
to keep your computer on the current status of technology:
1. Open Windows Update in the Help and Support Center.
2. Click on Search for update.
3. Click on Add to select the desired update and to add
it to the updates to be installed, while you are
searching through the available updates in each
category. You can also read a complete description
of each individual element by clicking on the Read
further Link.
4. Click on Check and install updates, when you
have selected all the desired updates, and then click
on Install now.
88
F
IIRRSSTT
F
D
A
IID
A
Page 95
WINDOWS UPDATE INFORMATION FOR DATA SECURITY
Windows Update needs certain information about the respective
Notebook, so that a suitable list with updates can be provided for
you. This information will include the following:
• Version number of the operating system
• Version number of Internet Explorer
• Version numbers of additional software programs
• Plug & Play identification key of the hardware devices
Windows Update will stand up for the protection of your private
data and will not record your name, address, email address or
other forms of personal data. The information collected will only be
used during the time that you are visiting the website. It will also
not be stored.
 The update can only be executed via the Internet.
Ensure that you are on-line with your notebook
when downloading the updates.
Safety Handling Components Aid Appendix
D
AATTAA AANNDD
D
S
YYSSTTEEMM
S
S
S
EECCUURRIITTY
Y
89
Page 96
S
YYSSTTEEMM
S
Before performing a recovery, you should review the “Troubleshooting” section in this manual to see if you can resolve the
problem. If not, it is possible that a software file required by Windows XP to operate the computer was damaged or deleted. If this
is the case, there are basically two strategies for recovery.
• Restoring your system using Windows XP System
Restore
This type of recovery is usually very quick and will solve most
typical problems that occur after an unsuccessful installation
of an application, device, or driver has caused instability in the
system.
• Restoring your system using the Application & Support
Disc provided by Medion and powered by Symantec
There are several options for recovery available using the
Application & Support Disc, including the ability to restore you
entire system to its original factory settings.
R
EECCOOVVEERRY
R
Y
RESTORING MICROSOFT WINDOWS XP
Windows XP System Restore allows you to set "recovery points."
This feature enables you to take a snapshot of the current system
configuration, which you can return to should an application, device, or driver cause instability in the system.
While Windows XP automatically creates recovery points, you can
also set them manually. In addition, you can configure the maximum amount of memory used for this.
To use System Restore to set recovery points or restore your system, click the Start menu, then choose All Programs, then
choose Accessories, then choose System Tools, then choose
System Restore. Select the task that you would like to perform
and follow the on screen instructions. For detailed information
refer to Windows XP Help and Support.
System Restore includes various functions to help ensure that
your Notebook and installed applications and devices work correctly. These functions assist you in solving the problems which
might occur by adding, deleting or replacing files required for
90
F
IIRRSSTT
F
D
A
IID
A
Page 97
proper functioning of Windows XP, and your software and devices.
The restore function you use depends on the type of problem or error.
In general, it is a good idea to set a recovery point before installing a new software program or driver. If the system becomes unstable during or after the installation, you can usually return to a
workable configuration without deleting newly created documents.
If Windows XP System Restore does not solve your problem refer
to the next section, System Restore powered by Symantec.
SYSTEM RESTORE POWERED BY SYMANTEC
If your system is not functioning properly and Windows XP System Restore did not solve the problem, then you should use the
Application Support Disc provided by Medion to restore your system. This recovery mode provides several options.
There are three options for restoring your system:
1. Recovery of start-up files
Use this option to restore the start-up files. This option is
most useful when a virus has corrupted certain files necessary
for your computer to boot. It is executed very quickly.
Safety Handling Components Aid Appendix
2. Recovery of system and driver files
This option will copy the original system and driver files to
your hard disk. This feature shouldn’t affect your personal
files and settings. However, we recommend that you first
back up your personal data just to be safe.
S
S
YYSSTTEEMM
R
EECCOOVVEERRY
R
Y
91
Page 98
3. Restoring the factory settings
This recovery will reset your system to its condition at
delivery. ALL DATA ON YOUR LOCAL DISC (C:) DRIVE WILL
BE ERASED. If possible, back up your personal data to
external media before performing this restore.
LIMITS OF RESTORE FACTORY SETTINGS (RESTORE OPTION 3)
Any changes made to the original factory configuration (for example, settings for your display, printers, network, or Internet connection) will be overwritten by this restoration.
Any software that you installed after purchasing the computer will
be erased and will need to be reinstalled.
Everything on the C:\Local Disk partition will be erased. This
includes all of your documents and settings.
Tampering with the Recover (E:) hard disk drive or its contents
will make it more difficult to restore your Notebook. Do not alter,
resize, or delete the Recover (E:) hard disk drive. Also, do not
alter or delete the files on the Recover (E:) hard disk drive. We
strongly recommend that you do not store any files, folders, or
programs on the Recover (E:) hard disk drive.
PERFORMING THE RESTORE
Each step of the restore replaces an increasing number of files on
your hard drive, and therefore takes longer to finish. We recommend that you attempt each of the restore options in order, starting with “Recovery of start-up files.” After finishing each restore
option, you should test your system to see if it has solved your
problem. If the problem persists, then try the next restore option.
To make selections in the restore program, use the up and down
arrow keys to highlight the option you would like to select, and
then press enter to make the selection.
1. Copy your data files to external media (such as a floppy
disk, CD-R, CD-RW, DVD-RW, or flash card) BEFORE you
continue!
92
F
IIRRSSTT
F
D
A
IID
A
Page 99
2. Insert the “Application & Support” disc and restart (reboot) the
Notebook.
Caution: Do not use the “Medion Product Recovery” CD-ROM
(a Windows XP CD for restoring Windows XP itself) for restoration purposes. This disc does not restore the original factory
setup of the Notebook.
3. Select the option “Boot from CD-ROM” from the first screen.
4. Use the arrow keys to read through the license agreement,
and then press the Esc key to proceed.
5. Read the information screen that appears, and then press
Enter to proceed.
6. Select option 1, 2, or 3 to perform a restore (the types of
restore are described earlier in this chapter). Select option 4.
Reboot to cancel the restore process.
7. The next screen shows information about the type of restore
that you have chosen. Select either Abort or Back to return
to the previous screen, or select Finish to execute the
restore.
8. When the restore is completed, it automatically restarts the
Notebook. Remove and store the Application & Support disc.
Safety Handling Components Aid Appendix
S
YYSSTTEEMM
S
R
EECCOOVVEERRY
R
Y
93
Page 100
T
RROOUUBBLLEESSHHOOOOTTIINNGG
T
LOCALIZE THE CAUSE
Errors can have simple causes, but sometimes they are caused by
faulty equipment. We would like to give you some tips to help
solve common problems. Should these instructions not lead to
success, please feel free to contact us.
CHECK CABLES AND CONNECTIONS
Visibly check all cables and connections. Should all lights be off,
check whether all equipment is supplied with power.
¾ In battery mode, connect the Notebook to the power adapter
and ensure that the battery is charged up.
¾ If you are operating the Notebook with the power adapter,
check the electrical socket, power cord and all switches in the
circuit of the electrical socket.
¾ Switch off the Notebook and check all cable connections.
Check the connections to peripherals. Do not exchange cables, even though they may look similar. The polarity in the
cables may be different. When it is confirmed that the Notebook has power and all connections are correct, turn the
Notebook on again.
THE POWER ON SELF TEST (POST)
The Power On Self Test (POST) is executed during each boot
process to test the memory, motherboard, display, keyboard and
other components. If the Notebook does not pass the POST but
beeps several times, or if the screen remains blank, call your
Notebook support technician.
94
F
IIRRSSTT
F
D
A
IID
A
Loading...