Page 1
21.5” LED TV & DVD Combi
MEDION® LIFE
®
E12009 (MD 21259)
Instruction Manual
Page 2
EN
1 of 42
Contents
1. About these Instructions ............................................................................................................................................3
1.1. Warning Symbols and Keywords ..........................................................................................................................................................3
1.2. Target Group ................................................................................................................................................................................................. 3
1.3. Full HD ............................................................................................................................................................................................................. 3
2. Safety Instructions ......................................................................................................................................................4
2.1. Operating Safety ......................................................................................................................................................................................... 4
2.2. Set-Up Location ........................................................................................................................................................................................... 4
2.3. Repairs ............................................................................................................................................................................................................ 4
2.4. Intended Environment .............................................................................................................................................................................. 5
2.5. Power Supply ................................................................................................................................................................................................ 5
2.6. Battery Handling .........................................................................................................................................................................................5
2.7. Information about Conformity ..............................................................................................................................................................6
2.8. DVD Player ..................................................................................................................................................................................................... 6
2.9. Contents ......................................................................................................................................................................................................... 6
3. Device Overview .........................................................................................................................................................7
3.1. Front ................................................................................................................................................................................................................ 7
3.2. Rear .................................................................................................................................................................................................................. 8
3.3. Remote Control ........................................................................................................................................................................................... 9
4. Start of Operation .....................................................................................................................................................10
4.1. Unpacking ...................................................................................................................................................................................................10
4.2. Installation ...................................................................................................................................................................................................10
4.3. Inserting Batteries into the Remote Control ..................................................................................................................................10
4.4. Connecting the TV Antenna .................................................................................................................................................................11
4.5. DVB-T Mode (Standard Definition and High Definition) ............................................................................................................11
4.6. Connecting the DVB-T Antenna ..........................................................................................................................................................11
4.7. Connect the Power Supply Adapter...................................................................................................................................................11
4.8. Switching the LED-Backlight TV on and off .....................................................................................................................................11
4.9. First Time Use .............................................................................................................................................................................................12
5. Operation ...................................................................................................................................................................13
5.1. Channel Selection .....................................................................................................................................................................................13
5.2. Setting the Volume ...................................................................................................................................................................................13
5.3. Picture Setting ...........................................................................................................................................................................................13
5.4. Displaying Information ...........................................................................................................................................................................14
5.5. Favourite Channel List .............................................................................................................................................................................14
5.6. Input Source Selection ............................................................................................................................................................................14
6. Connecting External Devices ...................................................................................................................................15
6.1. Connecting Headphones .......................................................................................................................................................................15
6.2. Digital Amplifier via Coaxial Connection ........................................................................................................................................15
6.3. Connecting a Blu-Ray Player .................................................................................................................................................................15
6.4. Connecting a Video Recorder (VCR) ...................................................................................................................................................15
6.5. Connecting a DVD Recorder .................................................................................................................................................................16
6.6. Connecting a Set Top Box (SAT, SD/HD DVB-T, Decoder, Etc.) ..................................................................................................16
6.7. Connecting a DVD/video recorder and SAT receiver ...................................................................................................................16
6.8. Connecting a Camcorder .......................................................................................................................................................................17
6.9. Device with HDMI or DVI Output ........................................................................................................................................................17
6.10. Connecting an External Device with HDMI Output .....................................................................................................................17
6.11. Connecting an External Device with DVI Output ..........................................................................................................................17
6.12. Connecting a PC or Notebook .............................................................................................................................................................17
7. Basic OSD Menu Settings .........................................................................................................................................18
7.1. Navigating within the Menu .................................................................................................................................................................18
7.2. Picture Menu .............................................................................................................
.................................................................................19
7.3. Sound Menu ...............................................................................................................................................................................................19
7.4. Channel Menu ............................................................................................................................................................................................20
7.5. Feature Menu .............................................................................................................................................................................................21
7.6. Setup Menu .................................................................................................................................................................................................24
8. Media Mode ...............................................................................................................................................................25
8.1. Media Mode and USB Connectivity ...................................................................................................................................................25
Page 3
2 of 42
8.2. Recording via REC Button ......................................................................................................................................................................25
8.3. Switching between TV Mode and Media Mode ............................................................................................................................25
8.4. Media Menu System ................................................................................................................................................................................26
8.5. Media Player Access .................................................................................................................................................................................26
8.6. Media Player Menu ...................................................................................................................................................................................26
8.7. Display of Photos / Images ....................................................................................................................................................................26
8.8. Audio Playback ..........................................................................................................................................................................................27
8.9. Video Playback ...........................................................................................................................................................................................27
8.10. Text Playback ..............................................................................................................................................................................................28
9. PVR Function .............................................................................................................................................................28
9.1. Direct Recording (Start/Stop) ...............................................................................................................................................................28
9.2. Scheduled Recording ..............................................................................................................................................................................28
9.3. Playback of Recorded Files ....................................................................................................................................................................28
10. EPG - Program Guide ................................................................................................................................................29
11. DVD Mode ..................................................................................................................................................................30
11.1. Switching from TV to DVD mode ........................................................................................................................................................30
11.2. Inserting a DVD ..........................................................................................................................................................................................30
11.3. Button function .........................................................................................................................................................................................30
11.4. Navigating between Audio & Picture (MP3 & JPEG) .....................................................................................................................31
11.5. DVD Player Setup ......................................................................................................................................................................................31
12. Troubleshooting ........................................................................................................................................................34
12.1. Do You Need More Help? .......................................................................................................................................................................35
13. LED-Backlight TV pixel faults ...................................................................................................................................35
14. Cleaning .....................................................................................................................................................................36
15. Disposal .....................................................................................................................................................................36
16. Technical Data ...........................................................................................................................................................37
17. Legal Notice ...............................................................................................................................................................39
18. Index ..........................................................................................................................................................................41
Page 4
EN
3 of 42
1. About these Instructions
Before using the device for the first time, you should read these operating instructions thoroughly and follow
the safety advice. This device may only be used as described in the operating instructions.
Always keep these operating instructions at hand but store them safely so that you can pass them on to a new
owner should you sell the unit.
1.1. Warning Symbols and Keywords
DANGER!
Warning of immediate risk of fatal injury!
WARNING!
Warning: possible mortal danger and/or serious irreversible injuries!
CAUTION!
Warning: possible light or moderate injuries!
CAUTION!
Please follow the guidelines to avoid property damage.
PLEASE NOTE!
Additional information on using the device!
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: danger of electric shock!
WARNING!
Warning: danger due to excessive volume!
• Bullet point/information on operating steps and results
Tasks to be performed
1.2. Target Group
• This unit is to be used only for receiving and playing back TV programmes. The range of connections supplied makes
it possible to expand the input and output sources (e.g. receiver, DVD player, DVD recorder, video recorder, PC, etc.).
• This unit is intended for use in dry, indoor areas only.
• It is not suitable for use as a data monitor for office workstations.
• The unit is intended for private use only and not for industrial or commercial use. Using the device in extreme
environmental conditions may result in it being damaged.
1.3. Full HD
Your LED-Backlight TV is equipped with the feature “Full HD”. This means that it is capable of
displaying high-resolution television programmes (HDTV). The prerequisite for this is a HDTV
signal.
Page 5
4 of 42
2. Safety Instructions
2.1. Operating Safety
• Children should be supervised to ensure they do not play with this unit. This unit is not intended for use by people
(including children) with reduced physical, sensory or mental abilities or for those without experience and/or
knowledge, unless they are supervised by a person responsible for their safety or they have been instructed on its
use.
WARNING!
Keep packaging material such as plastic film away from children. There is a risk of suffocation if used
improperly.
WARNING!
Never open the housing of the LED-Backlight TV (electrical shock, short circuit and fire hazard)!
WARNING!
Never insert any objects through the slots and openings of the LED-Backlight TV (electrical shock, short
circuit and fire hazard)!
• The slots and openings on the LED-Backlight TV are for ventilation purposes. Do not cover these openings
(overheating, fire risk)!
• Do not put any pressure on the display. There is a risk that the screen may break.
• The remote control has a class 1M infrared diode. Never use optical devices to look at the LED.
CAUTION!
There is a risk of injury if the screen is damaged! Recover all broken pieces using protective gloves and send
them to your Service Centre for proper waste disposal. Then wash your hands with soap because chemicals
may have leaked out.
• To avoid damaging the screen do not touch it with fingers or sharp objects.
• Contact customer services if:
− the power cable is burnt or damaged
− liquid has penetrated the device
− the device is not operating correctly
− the device has fallen, or the casing is damaged
2.2. Set-Up Location
• In the first hours of operation, new devices may emit a typical, unavoidable but completely harmless smell, which
will decline increasingly in the course of time. We recommend that you ventilate the room regularly, in order to
counteract the formation of the smell.
• Keep your LED-Backlight TV and all connected devices away from moisture and avoid dust, heat and direct sunlight.
• Do not use the device outdoors because other effects such as rain, snow etc. can also damage the device.
• The device must not be exposed to water droplets or spray. Do not place objects that are filled with water (such as
vases) on the device. The container may tip over and the liquid will impair the electrical safety.
• Do not operate the device near water and do not set it up near a wash-hand basin or bath, etc.
CAUTION!
Do not place any exposed sources of ignition (candles or similar) on or near the device.
• Make sure that there is enough clearance in the wall units! Ensure a minimum separation of 10 cm around the
device for sufficient ventilation.
• Operate all components on a stable, level and vibration-free base, to prevent the LED-Backlight TV from falling over.
• Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes.
• The optimal viewing distance is 5 times the screen diagonal.
2.3. Repairs
• Repairs to your LED-Backlight TV should only be carried out by qualified specialists.
• Please contact our authorised service centre if you have any problems with your LED-Backlight TV.
• Make sure to use only replacement parts provided by the manufacturer. The device may sustain damage if
unsuitable replacement parts are used.
Page 6
EN
5 of 42
2.4. Intended Environment
• The device can be operated at an ambient temperature of +5° C to +40° C and a relative humidity of 20% - 85% (non
condensing).
• In the switched-off state the LED-Backlight TV can be stored from -20° C to +60° C.
• Keep the device at a distance of at least one metre from high frequencies and magnetic sources of interference
(television, loudspeaker boxes, mobile telephones etc.) to avoid malfunctioning.
WARNING!
After transporting the LED-Backlight TV wait until the device has reached ambient temperature before
switching it on.
Large changes in temperature or fluctuations in humidity can cause moisture to build up due to
condensation within the LED-Backlight TV, which can cause an electrical short circuit.
• During thunderstorms or if the device is not going to be used for long periods, remove the plug from the mains
socket and the aerial cable from the aerial socket.
2.5. Power Supply
• Even when switched off, some components of the device are live. In order to disconnect the power to your LED-
Backlight TV or to completely isolate the device from voltage sources remove the mains plug from the mains socket.
WARNING!
Do not open the device’s housing. There is a risk of electric shock when the housing is open. The device
does not contain any parts requiring maintenance.
• Only plug the LED-Backlight TV into an earthed socket with 100-240 V~ 50/60 Hz. Contact you electricity provider if
you are not sure if the socket is earthed or not.
• The socket must be near the LED-Backlight TV and easily accessible.
• In order to disconnect the power to your LED-Backlight TV or to completely isolate the device from voltage sources
remove the mains plug from the mains socket. Always grab the plug firmly when unplugging it from the socket.
Never pull on the lead.
• For extra safety, we recommend using an over-voltage protection device to prevent your LED-Backlight TV
sustaining damage as a result of power surges or lightning strikes.
• If you are using an extension cable, make sure that it complies with UK and Ireland Electrical Safety requirements. If
in doubt, contact your electrician.
• Position the cable so that nobody is able to step on it or trip over it.
• Do not place any objects on the cable to avoid damaging it.
2.6. Battery Handling
WARNiNG!
Batteries can contain combustible materials. If not handled correctly batteries can leak, become very hot,
ignite or even explode, which could damage your device or/and your health.
Please ensure compliance with the following advice:
• Keep batteries away from children. Contact your doctor immediately if a battery is swallowed.
• Never charge batteries (unless it is clearly indicated).
• Never discharge batteries by high power output.
• Never short-circuit the batteries.
• Never expose the batteries to excessive heat such as sunshine, fire or similar.
• Do take apart or deform the batteries. Your hands or fingers could get injured or battery fluids could get into your
eyes or onto your skin. If this should happen then rinse the affected areas immediately with a large amount of clean
water and contact your doctor immediately.
• Avoid heavy impacts and vibrations.
• Always observe the correct polarity.
• Make sure that the plus (+) and minus (-) poles are correctly inserted in order to avoid short circuits.
• Never mix new and old batteries or different types of batteries. This could cause your device to malfunction. In
addition, the weaker batteries would discharge too much.
• Immediately remove used batteries from the device.
• Remove the batteries from the device if you do not intend to use it for a long period of time.
• Replace all the old batteries in a device with new batteries of the same type.
• Isolate the contacts of the batteries with sticky tape if you want to store or dispose of them.
• Clean the contacts on the battery and device before inserting.
Page 7
6 of 42
2.7. Information about Conformity
The device fulfils electromagnetic compatibility and electricity safety requirements.
Your device complies with the basic requirements and the relevant UK and Ireland EMC guidelines [electromagnetic
compatibility] and the UK and Ireland electrical safety guidelines.
This device fulfils the basic requirements and the relevant regulation of the Ecodesign Guideline 2009/125/EG
(Commission Regulation 1275/2008).
2.8. DVD Player
The DVD player is a class 1 laser product. The device has a safety system that prevents dangerous laser
rays from escaping during normal use. To avoid eye injuries, never tamper with or damage the device’s
safety system.
2.9. Contents
Please check the items received in the box and inform us within 7 days from purchase if anything is missing. Your
statutory rights are not affected.
WARNING!
Keep packaging material such as plastic film away from children. There is a risk of suffocation if used
improperly.
You should receive the following items:
• 54.6 cm (21.5") Full HD LED-Backlight TV
• External power supply model DC12030012A
• Remote Control (E-14D) incl. Batteries (1.5V LR3/AAA)
• Stand (including 4 screws)
• AV-Adapter
• YUV-Adapter
• Documentation
Page 8
EN
7 of 42
3. Device Overview
3.1. Front
INPUT
89
1
2
3
4
5
6
7
1) INPUT: Select source
2) MENU: Call up the on-screen menu to make settings on your device
3) CH + /CH : Select a channel or navigate in the menu
4) VOL +/VOL : Set the volume or navigate in the menu
5) PLAY: For playing back DVDs
6) EJECT: Eject button (DVD)
7) POWER: Standby button: switches the device on or into standby mode
8) Operating light: Lights up red when the appliance is in standby mode.
Lights up green when the appliance is switched on.
Infrared sensor: Reception field for the infrared signals from the remote control
9) LCD screen
Page 9
8 of 42
3.2. Rear
Power
12V 3A
Headphone Out
VGA
TRACSnI oiduA
VGA
SPDIF
COAX Out
HDMI
RF
Common Interface
Mini
YPbPr
1
2
3
4
5
6
789101112
13
14
USB
9P$PD[
Mini
AV
SCARTVGA
HDMI
YPbPr
Mini
AV
Mini
RF
Common Interface
USB
9P$PD[
Power
12V 3A
Headphone Out
VGA
Audio In
SPDIF
COAX Out
1) MINI AV: Audio/video input (via included cinch adapter)
2) COMMON I N T E R FACE C I+ : Card slot for connecting CI modules
3) MINI YPBPR: Component inputs for connecting devices with component output (via included cinch adapter)
4) RF: Aerial connection (DVB-T/analogue)
5) USB / 5V DC MAX. 500mA: USB connection for connecting an external storage medium for playing back music,
images and videos
6) HDMI: HDMI connection for devices with HDMI output
7) SPDIF COAX OUT: Digital audio output (coaxial)
8) SCART: SCART connection
9) VGA: Connection for connecting a PC
10) VGA AUDIO IN: Audio connection for PC sound playback
11) HEADPHONE OUT: For connecting headphones with a 3.5 mm jack plug
12) POWER DC IN 12V 3A: Connection for the power supply adapter
13) DVD player
14) Fixing holes for a wall bracket (hole spacing 100 x 100 mm)
PLEASE NOTE!
When mounting the device, make sure that you use M4 screws. The length of the screws corresponds to the
thickness of the wall bracket plus a max. of 8 mm.
Page 10
EN
9 of 42
3.3. Remote Control
1) Eject button for the DVD player
2)
/MUTE: Mute the sound
3) ASPECT: Select picture format
4) SLEEP: Activate/deactivate the sleep timer
5) FAV: Activate favourites list
6) EPG: Digital TV: call up the electronic programme guide
7) INPUT: Select input signal of connected devices
8) Direction button : Move up in menu
Digital TV: Select info bar for the current programme;
Direction button : Move down in menu,
Digital TV: Select info bar for the current programme;
Direction button : Move left in menu;
Direction button : Move right in menu
OK: Confirm selection in certain menus
9) EXIT: Leave the menu
10) Number buttons: Programme selection
11)
: Set previous TV programme
12) DISPLAY: Digital TV: Show information (e.g. current channel
number); display elapsed time of current track, remaining track
time, elapsed time of chapter, remaining chapter time; selected
audio track, selected subtitles (all items depend on medium used)
13) REC LIST: Call up recording list (PVR)
14) CH /: Programme selection buttons
TV: Select next (+) / previous (-) programme
15) Colour buttons: Call up various functions in the OSD menu
16) REVEAL/D.SUB: DVD: Show subtitles
17) D.LANG/NICAM/A2: Analogue TV: Stereo/mono ; digital TV: select
audio language (if available); DVD: select disc language
18) SUBPAGE/: DVD: next track/next chapter
19) SIZE/: DVD: go to start of track/chapter; previous track/previous
chapter
20) HOLD/: DVD: fast forward
21) INDEX/ : DVD: rewind
22) TV/TXT/D.SET: DVD: open the DVD settings menu
23) CANCEL/D.MENU: DVD: call up and close title menu (if available)
24) VOL /+: Decrease/increase volume
25) REC: Start recording (PVR)
26) MENU: Open and close menu
27) TV/RADIO: Switch between TV and radio stations (if available)
28) CH.LIST: Open/close station list
29) SUBTITLE: Display subtitle selection (if available)
30) PICTURE: Select picture mode
31) SOUND: Select sound mode
32) POWER: Switch LED-Backlight TV on/off (switch standby mode
on/off)
32:(5 087(
',63/$<
0(18
797;7&$1&(/5(9($/1,&$0$
,1'(;+2/'6,=(68%3$*(
5(&
5(&/,67
(;,7
92/ &+
,1387795$',2
3,&785( 6281' $63(&7 6/((3
68%7,7/( &+/,67 (3* )$9
2.
'6(7 '68% '/$1
'0(18
1
232
3
4
5
6
31
30
29
28
19
11
15
16
13
7
8
9
10
14
17
18
20
23
25
24
26
27
22
21
12
Page 11
10 of 42
4. Start of Operation
CAUTION!
Before starting up please make sure that you read the “Safety instructions”section
4.1. Unpacking
• Select a suitable place for setting up the device.
• Open the box very carefully to avoid damaging the device. The device could be damaged if you use a knife with a
long blade to open the box.
• The box contains a number of small items (including batteries). Keep these items out of reach of children; the parts
are easy to swallow.
• Store the packaging material in a safe place; only use this box to transport the TV.
WARNING!
Keep packaging material such as plastic film away from children. There is a risk of suffocation if used
improperly.
4.2. Installation
Attach the base stand as shown in the drawing. Carry out this step before connecting the LED-Backlight TV.
4x
4.3. Inserting Batteries into the Remote Control
Open the battery compartment cover on the back of the remote control.
Insert two (AAA) 1.5-V batteries in the battery compartment of the remote control. Check the battery polarity
(inscribed on the bottom of the battery compartment).
Replace the cover.
CAUTION!
Remove the batteries if the device will not be used for long periods. The remote control can be damaged by leaking
batteries.
Page 12
EN
11 of 42
4.4. Connecting the TV Antenna
To connect to the house antenna or cable system, connect a double-screened cable from the antenna socket to the
LED-Backlight TV.
4.5. DVB-T Mode (Standard De nition and High De nition)
You will have the possibility of receiving DVB-T by means of a corresponding aerial, if it is offered at your location. An
additional receiver will not be necessary to receive DVB-T channels.
4.6. Connecting the DVB-T Antenna
Plug the connector of a DVB-T aerial into the aerial socket of the device.
4.7. Connect the Power Supply Adapter
Connect the 3.5 mm jack of the included power supply adapter model DC12030012A to the POWER DC IN
connection of the device.
Plug the power cable of the powersupply adapter into a 100 - 240 V - 50 Hz mains socket
CAUTION!
Please only use the included power supply adapter model DC12030012A. The use of different power supply adapters
may cause damages to the device.
4.8. Switching the LED-Backlight TV on and o
Connect the power supply adapter to the device and plug it to the mains. The unit will switch to standby off mode
when connected to the mains.
To switch on the unit either press the button on the remote control or the POWER button of the unit.
Press the button on the remote control or the POWER button of the unit to switch the device over to standby
mode again. The unit continues to consume power in this mode.
Disconnect the power cord from the mains to switch it off completely.
PLEASE NOTE!
If there is no input signal, the device will automatically switch to standby mode after five minutes. A
countdown time will appear on the screen to show the remaining time. This function is not available for all
sources.
Page 13
12 of 42
4.9. First Time Use
You will be guided through the AUTO INSTALLATION menu after you switch the device on for the first time.
2N ([LW
ExitOKMove
Auto Installation
Country :
France
Italy
- Setup 1 -
Next Page
Germany
Poland
UK
Select the country required with the directional buttons. The country setting will have an influence on the sequence
in which the channels are stored. Press OK.
2N ([LW
ExitOKMove
Auto Installation
Language :
French
Italian
Dutch
- Setup 2 -
Next Page
German
Previous Page
English
Select a language with the directional buttons and press OK.
2N ([LW
ExitOKMove
Auto Installation
Auto Search
AT V
- Setup 3 -
All
Previous Page
DTV
Use the direction buttons to select the reception type:
• ALL (search for digital and analogue TV stations);
• ATV (search for analogue TV stations);
• DTV (search for digital TV stations)
After you have finished making your settings, press OK. The search process starts.
([LW
Exit
Auto Installation
ATV channels found:
DTV channels found:
Radio channels found:
Process
&+ .+]
0HQX Skip
The device will search for the corresponding transmission types in order. Wait until the process is finished. You can use
the EXIT button to cancel the search.
PLEASE NOTE!
You can always access the first-time installation screen again via SETUP > AUTO INSTALLATION and go
through the settings again.
Page 14
EN
13 of 42
5. Operation
5.1. Channel Selection
• To select a channel, either press the buttons CH/ (on the device or on the remote control) or select the channel
directly by pressing the appropriate numbers.
For a two- or three-figure number, press the number buttons in the corresponding order.
• Press the button to select the last channel played.
5.2. Setting the Volume
You can increase or decrease the volume by pressing the volume buttons VOL /+ on the remote control or on the
device.
Use the button to switch the volume fully off and on again.
Use the SOUND button to switch between the following sound modes: STANDARD, MOVIE, MUSIC, SPEECH,
USER. The USER setting is defined under the menu option SOUND > SOUND MODE.
Using the D.LAN button you can set the audio language if the current broadcast supports dual language mode (e.g.
bilingual broadcasts).
5.3. Picture Setting
Use the PICTURE button to switch between the following picture modes: STANDARD, MILD, USER, DYNAMIC.
The USER setting is defined under the menu option PICTURE > PICTURE MODE.
Depending on the program, the pictures are displayed in the formats 4:3 or 16:9. Use the ASPECT button to
adjust the picture format:
AUTO (not available for YPbPr, PC, MEDIA and DVD ): The format displayed is automatically adjusted to match the
input signal.
4:3: Is used to display a standard picture (aspect ratio of 4:3) as this
is its original format.
16:9: Here you can stretch the left and right sides of a normal
picture (aspect ratio 4:3) by an equal amount to fill the full width of
the TV screen.
FULL: Exact representation of number of pixels (1:1).
ZOOM 1 (not available for PC): The image is stretched to the upper
and lower edges of the screen.
ZOOM 2 (not available for PC): Additional zoom level after Zoom
1. The image is also stretched out left and right.
PANORAMA (for DTV CINEMA) (not available for PC): This
function zooms a widescreen image (aspect ratio 16:9) to fill the
entire screen.
JUST SCAN (not available for ATV, AV, YPbPr, PC, MEDIA and DVD):
Reduced display of the image.
Page 15
14 of 42
5.4. Displaying Information
Press the DISPLAY button to show information about the current programme.
You can get the same information when you switch over to a different channel.
5.5. Favourite Channel List
In the CHANNEL > FAVORITE MANAGEMENT menu, you can add individual channels to up to four favourites
lists. You have to have saved channels in the favourites list before you can open them as described in the following
section.
If you have saved channels in the favourites list, you can open them as follows:
Open the menu by pressing FAV .
Use the direction buttons to select one of the four favourites lists.
With the red button you can change the name of the favourites list.
Use the direction buttons to select a programme and open it by pressing OK.
5.6. Input Source Selection
Use INPUT to call up the source selection list. The following sources are available:
− DTV TV mode (digital signal)
− ATV TV mode (analogue signal)
− AV Device on AV input
− SCART Device on SCART input
− YPBPR Device on the video and audio input components
− HDMI Device on HDMI 1 input
− PC Device on PC input
− MEDIA Playback of media via USB
− DVD Integrated DVD player
Use the direction arrows to go to the desired source.
Confirm your selection with OK.
Page 16
EN
15 of 42
6. Connecting External Devices
6.1. Connecting Headphones
The headphones are connected to the headphone socket. The headphone volume is controlled using the volume
buttons and the button on the remote control. When headphones are connected, the sound output of the main
speakers is switched off.
WARNING!
Using headphones at high volume generates excessive acoustic pressure and can result in permanent
hearing damage. Before pressing play, set the volume to the lowest setting. Start playback and increase
the volume to a comfortable level. Changes to the basic equaliser settings can increase the volume and
thus damage your hearing permanently.
WARNING!
Using headphones to listen to a device at high volumes for an extended period can damage your
hearing.
6.2. Digital Ampli er via Coaxial Connection
By using the SPDIF COAX OUT connection, you have the possibility of outputting the audio signal of your LED-
Backlight TV via a digital amplifier.
To do this, connect a coaxial cable to the SPDIF COAX OUT output on the LED-Backlight TV and the corresponding
input on the amplifier.
6.3. Connecting a Blu-Ray Player
There are a number of options for connecting a Blu-Ray player:
6.3.1. AV Video/Audio Cable (3 x Cinch/RCA on 3.5 mm jack)
Connect the AV adapter to the Mini AV connection on the LED-Backlight TV.
Connect a stereo cinch/RCA cable (red and white jack) to the AV adapter and the audio outputs on the external
device.
Connect a video cinch/RCA cable (yellow jack) to the AV adapter and the video outputs on the external device.
PLEASE NOTE!
Please only use the included AV adapter.
6.3.2. Component Video Cable (3 x Cinch/RCA on 3.5 mm jack)
If the Blu-Ray player has YUV outputs (Y Pb Pr), we recommend connecting the player to the Mini YPbPr input on the
LED-Backlight TV via cinch/RCA cables and the included YUV adapter
PLEASE NOTE!
Please only use the included YUV adapter.
For audio transmission connect the included AV adapter to the Mini AV connection and connect a stereo cinch/RCA
cable (red and white plugs) to the corresponding connections of the adapter and the audio outputs of the device.
PLEASE NOTE!
Please only use the included AV adapter.
6.3.3. HDMI Cable
If your device has a HDMI output, connect a HDMI cable (not supplied) to the HDMI input of the LED-Backlight TV
and to the HDMI output of the external device.
6.4. Connecting a Video Recorder (VCR)
Connect an antenna cable between the antenna socket on the LED-Backlight TV and the output on the video
recorder.
Connect an additional antenna cable between the antenna input on the video recorder and the antenna socket in
the wall.
Page 17
16 of 42
6.5. Connecting a DVD Recorder
Connect an antenna cable to the antenna socket on the LED-Backlight TV and the antenna output on the DVD
recorder.
Connect an additional antenna cable between the antenna input on the DVD recorder and the antenna socket in
the wall.
6.5.1. Component Video Cable (3 x Cinch/RCA on 3.5 mm jack)
If the DVD recorder has YUV outputs (Y Pb Pr), we recommend connecting the recorder to the Mini YPbPr input on
the LED-Backlight TV via cinch/RCA cables and the included YUV adapter
PLEASE NOTE!
Please only use the included YUV adapter.
For audio transmission connect the included AV adapter to the Mini AV connection and connect a stereo cinch/RCA
cable (red and white plugs) to the corresponding connections of the adapter and the audio outputs of the device.
PLEASE NOTE!
Please only use the included AV adapter.
6.5.2. HDMI Cable
If the DVD recorder has a HDMI output, connect a HDMI cable (not included) between the HDMI input on the LED-
Backlight TV and the HDMI output on the external device.
6.6. Connecting a Set Top Box (SAT, SD/HD DVB-T, Decoder, Etc.)
There are different options for connecting a receiver (e.g. SAT, SD/HD DVB-T, Decoder, etc.) to your LED-Backlight TV.
6.6.1. AV Video/Audio Cable (3 x Cinch/RCA on 3.5 mm jack)
Connect the AV adapter to the Mini AV connection on the LED-Backlight TV.
Connect a stereo cinch/RCA cable (red and white jack) to the AV adapter and the audio outputs on the external
device.
Connect a video cinch/RCA cable (yellow jack) to the AV adapter and the video outputs on the external device.
PLEASE NOTE!
Please only use the included AV adapter
6.6.2. HDMI Cable
If the external device has a HDMI output, connect a HDMI cable (not included) between the HDMI input on the LED-
Backlight TV and the HDMI output on the external device.
6.6.3. Component Video Cable (3 x Cinch/RCA on 3.5 mm jack)
If the device has YUV outputs (Y Pb Pr), we recommend connecting the device to the Mini YPbPr input on the LED-
Backlight TV via cinch/RCA cables and the included YUV adapter
PLEASE NOTE!
Please only use the included YUV adapter.
For audio transmission connect the included AV adapter to the Mini AV connection and connect a stereo cinch/RCA
cable (red and white plugs) to the corresponding connections of the adapter and the audio outputs of the device.
PLEASE NOTE!
Please only use the included AV adapter.
6.7. Connecting a DVD/video recorder and SAT receiver
If you want to connect a DVD or video recorder and a SAT receiver at the same time, you can do so as follows:
Connect the receiver as described above.
Now connect the receiver by plugging a SCART cable (not supplied) into the SCART output on the DVD recorder and
the corresponding SCART input on the receiver.
Connect an aerial cable between the aerial socket on the LED-Backlight TV and the aerial output on the recorder.
Connect an additional aerial cable between the aerial input on the DVD recorder and the aerial output on the
receiver.
Connect the SAT receiver to the LNB on the parabolic antenna.
Page 18
EN
17 of 42
6.8. Connecting a Camcorder
6.8.1. Component Video Cable (3 x Cinch/RCA on 3.5 mm jack)
Connect the AV adapter to the Mini AV connection on the LED-Backlight TV.
Connect a stereo cinch/RCA cable (red and white jack) to the AV adapter and the audio outputs on the camera.
Connect a video cinch/RCA cable (yellow jack) to the AV adapter and the video outputs on the camera.
PLEASE NOTE!
Please only use the included AV adapter
6.9. Device with HDMI or DVI Output
HDMI (“High Definition Multimedia Interface“) in consumer electronics is the only interface that transmits audio and
video data simultaneously. It handles all image and sound formats currently in use, including HDTV (High Definition
TV), which means it can also display resolutions of 1080i without any loss in quality.
Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI outputs.
6.10. Connecting an External Device with HDMI Output
Switch both devices off.
Connect a HDMI cable (monitor cable; not supplied) to the HDMI input of the LED-Backlight TV and to the HDMI
output of the external device.
Switch the LED-Backlight TV on when the HDMI device is connected.
Switch on the external HDMI playback device.
6.11. Connecting an External Device with DVI Output
If the external device has a DVI output then you can also connect it to the HDMI input (HDMI is downwards compatible
to DVI – “Digital Visual Interface”). For this you will need a HDMI-DVI adapter. The DVI output does not transmit sound so
you will have to connect an audio cable in addition.
Connect a stereo cinch/RCA cable with 3.5-mm jacks to the VGA AUDIO-IN socket to transmit sound.
6.12. Connecting a PC or Notebook
The LED-Backlight TV is connected to your PC or Notebook like a monitor or additional monitor. The picture on your
notebook or PC is then transmitted to the LED-Backlight TV.
Connect the LED-Backlight TV to the PC as follows:
Switch both devices off.
Connect a VGA cable (monitor cable; not supplied) to the VGA input of the LED-Backlight TV and to the graphic card
output of the PC or Notebook.
Tighten up the screws of the monitor cable with your fingers, so that the plug is correctly seated in the socket.
If you want to transmit a sound signal, connect an audio cable from the PC AUDIO-IN socket and PC/notebook
Audio output
First switch on the LED-Backlight TV.
Use INPUT to select PC mode.
The PC display appears on the LED-Backlight TV. Use the INPUT button to return to the TV mode.
If you use the LED-Backlight TV as a second monitor for your PC you might have to change the display properties
of your operating system. To do this please read the operating instructions of your PC/notebook to find out the
operational requirements if more than one monitor is used.
Page 19
18 of 42
7. Basic OSD Menu Settings
You can customise certain functions of the OSD (On-Screen Display) menu.
7.1. Navigating within the Menu
Press the MENU button to activate the OSD. The available options are displayed on the lower edge of the screen.
You can use the direction keys to select the options from the main menu.
Use to switch over to the menu entries.
You can use the direction keys to select the options from any of the menus.
Press MENU to return to the main menu.
Use the direction button to access a sub-menu (not every menu has a sub-menu option).
Press MENU to return to the next-higher menu.
Use the direction buttons to enter a desired value or make another selection.
Press EXIT to close the menu and also confirm your selection.
Please remember that the menu will close automatically after a couple of seconds if you don’t press a button.
You can select the following main menus:
• Menu PICTURE
• Menu SOUND
• Menu CHANNEL
• Menu FEATURE
• Menu SETUP
PLEASE NOTE!
Technical changes to the device means the menus described here may differ from the menus actually
displayed on the screen.
Not all menus will be available, depending on the source you have selected. Switch to a different source to
access all available menus.
Page 20
EN
19 of 42
7.2. Picture Menu
2N ([LW 0HQX
Exit ReturnOKMove
Picture
Standard
50
50
50
5
Standard
Picture
Picture Mode
Brightness
Contrast
Sharpness
Colour
Tint
Colour Temperature
Aspect Ratio
50
Sound
Channel
Feature
Setup
Auto
Menu Item Setting
PICTURE MODE
Select picture mode: DYNAMIC, STANDARD, MILD, USER. This function corresponds to
the PICTURE button.
BRIGHTNESS
Increase or decrease brightness (on a scale of 0 – 100).
CONTRAST
Increase or decrease contrast (on a scale of 0 – 100).
SHARPNESS
Increase or decrease sharpness (on a scale of 0 – 5).
COLOUR
Increase or decrease colour (on a scale of 0 – 100).
TINT
Hue settings only available for NTSC reception.
COLOUR
TEMPERATURE
Select colour temperature: STANDARD, COOL and WARM.
ASPECT RATIO
Set the picture format here.
This function corresponds to the button ASPECT.
NOISE REDUCTION
This function reduces picture noise and improves image quality when the signal is weak.
Choose between LOW, MIDDLE, HIGH and OFF.
7.3. Sound Menu
2N ([LW 0HQX
Exit ReturnOKMove
Sound
User
50
50
Off
0
PCM
Sound
Sound Mode
Bass
Treble
Balance
Surround
AVL
SPDIF
Picture
Channel
Feature
Setup
Off
Menu Item Setting
SOUND MODE
Select audio mode: STANDARD, MOVIE, MUSIC, SPEECH, USER. This function
corresponds to the SOUND button.
BASS
Increase or decrease bass (on a scale of 0 – 100).
TREBLE
Increase or decrease treble (on a scale of 0 – 100).
BALANCE
Set the balance between the left and right speakers.
SURROUND
Activate/deactivate the surround sound effect.
AVL
The function AVL (Automatic Volume Limiting) compensates for the various volumes of the
different channels. If you set to OFF, you will hear the original volumes. If you set to ON, you
will hear a balanced volume.
SPDIF
Select the spdif mode.
Page 21
20 of 42
7.4. Channel Menu
2N ([LW 0HQX
Exit ReturnOKMove
Channel
OK
OK
Australia
OK
Channel
Channel Management
Favorite Management
Country
Auto Search
DTV Manual Search
ATV Manual Search
Picture
Sound
Feature
Setup
OK
OK
Menu Item Setting
CHANNEL MANAGEMENT
You will see the currently saved channel here. Each channel can be customised as
follows:
DEL(ETE)
Select the channel that you wish to delete and press the red button.
Press the EXIT button and confirm your choice by pressing OK if you are certain
that you want to delete the channel. Select CANCEL if you want to cancel the
process.
LOCK
Select the channel that you wish to lock and press the green button. The channel
lock only works if the LOCK function is activated in the FEATURE menu.
SKIP
Select the channel that you want to skip while browsing through the channels by
using the P+/ buttons and press the yellow button.
You can still select this channel via the numeric pad.
MOVE (only in ATV mode)
Select the channel and press the blue button (the coloured highlight of the
selected channel flashes). Now move the channel to the desired location using
and press the blue button again. The other channels will be shifted up/down
accordingly.
FAVORITE MANAGEMENT
In the Favourites Manager you can set up up to four favourites lists.
Use to select the desired channel. The CH+- buttons bring you direct to
the next/previous channel in the channel list.
Now press the respective colour button to add the channel to one of the four
favourites lists (FAV 1: red button, FAV 2: green button,
FAV 3: yellow button, FAV 4: blue button).
Close Favourites Management with EXIT. The settings are saved.
Now you can call up your favourites lists by using the FAV button.
COUNTRY
Select the required country for the channel search.
AUTO SEARCH
Choose the reception type:
• ALL (search for digital and analogue TV stations);
• ATV (search for analogue TV stations);
• DTV (search for digital TV stations)
After you have finished making your settings, press OK. Confirm the following
query with OK if you want to start the channel search. Select CANCEL if you
want to cancel the process.
DTV MANUAL SEARCH
(only in DTV mode)
You can program individual channels in DTV mode manually here.
CHANNEL
Select the channel number.
FREQUENCY
Select the desired frequency
Page 22
EN
21 of 42
Menu Item Setting
BANDWIDTH
Select the bandwidth.
Select START and press OK to start the manual search. The STRENGTH and
QUALITY of the signal is displayed in percent.
ATV MANUAL SEARCH
(only in ATV mode)
You can program individual channels in ATV mode manually here..
CURRENT CHANNEL
Use this to select the channel you would like to
address..
FREQUENCY
Frequency of the current channel
SEARCH
Start the channel search with
FINE TUNE
Press to carry out the fine adjustment.
COLOR SYSTEM
PAL, SECAM, AUTO. For Australia, the colour
system is set to PAL.
SOUND SYSTEM BG, DK, I, L, L‘
SAVE
Press the red button to save your settings
PLEASE NOTE!
The channels that are found can be saved after the search by pressing the red button on the remote control.
7.5. Feature Menu
2N ([LW 0HQX
Exit ReturnOKMove
)HDWXUH
OK
OK
OK
4 Hours
Off
Feature
Lock
Language
Clock
Sleep Timer
Auto Power Off
Hearing impared
CI Info
3LFWXUH
6RXQG
&KDQQHO
6HWXS
Off
OK
PVR/Pause TV
OK
Menu Item Setting
LOCK
You can use this to activate the settings LOCK ENABLE, PARENTAL GUIDANCE
and HOTEL MODE You need to enter the password. The default password is: 0000.
PLEASE NOTE!
Make a note of the new password. It will not be reset if you restore the factory
settings.
Use 8899, the master password, if you have forgotten your password.
LOCK CHANNEL
Activate/deactivate the lock function.
PARENTAL
GUIDANCE
Here you can select the age.
This option is only available in DTV mode. Only available if the
LOCK ENABLE is activated.
CHANGE PIN
CODE
An input field for entering the passwords will appear.
OLD
PASSWORD
Use the number buttons to enter the existing
password. Delivery state: 0000..
NEW
PASSWORD
Enter a new four-digit password.
CONFIRM
NEW
PASSWORD
Enter the new password again. The
appropriate message will appear.
Page 23
22 of 42
Menu Item Setting
HOTEL MODE
In Hotel Mode you can make various settings which restrict the
functionality and operation of the device.
LANGUAGE
OSD
LANGUAGE
Select the language of the OSD menu or of the TT language. It will
change immediately..
1st PREFERRED
SUBTITLE
Select the first preferred subtitle language
2nd PREFERRED
SUBTITLE
Select the second preferred subtitle language
1st PREFERRED
AUDIO
Select the first preferred audio language
2nd PREFERRED
AUDIO
Select the second preferred audio language
DTV TELETEXT
LANGUAGE
Select the DTV teletext language
ATV TELETEXT
LANGUAGE
Select the ATV teletext language
CLOCK
DATE/TIME
Displays the set date and time. These entries cannot be changed.
TIME ZONE
Use to select the required value. The current time will be
adjusted accordingly.
DST
Activate/deactivate summer time.
SLEEP TIMER
Here you can set the time interval for the sleep timer. Once the interval has been
reached, the TV set switches itself off.
AUTO POWER OFF
Here you can set the time after which the LED-Backlight TV automatically switches itself
off if no operation has been made via the operating panel or the remote control within
the set time.
This is a function which helps protect the environment.
HEARING IMPARED
(not in ATV mode)
If the station transmits special audio signals for the hearing impaired, you can set the
setting to ON to receive these signals.
This option is only available in DTV mode.
CI INFO
You will have to register with the respective provider in advance, if you wish to watch
channels with costs. You will receive a Conditional Access Module (CAM Module) and
a special card from your provider after registration. You will find information about the
settings in the documentation supplied with the Module.
Install the CI components on your LCD TV in the following way:
Switch the LCD TV off and pull out the mains plug.
Place the CAM Module in the insertion position on the back of the LCD TV first. Then,
insert the card.
Pay attention to the fact that you must only insert or remove the CI Module if
the device is in the STANDBY Mode or has been separated from the electricity
network. The CAM Module must be inserted correctly; it cannot be inserted
incorrectly. The CAM Module or the television device can be damaged if you
attempt to push in the CAM Module with force.
Connect the LCD TV to the electricity supply, switch it on and wait for a moment until
the card is recognized.
Some setting steps, which you can carry out in the CI Info menu, are necessary in
addition in the case of some CAM Modules.
Page 24
EN
23 of 42
Menu Item Setting
PVR/ PAUSE TV
RECORDING FILE FORMAT
Select the recording file format for the USB storage medium (TS or PS)
PARTITION SELECT
FORMAT
Press the red button to format the USB storage
medium.
SET DEFAULT PARTITION
Press the green button to select the preset
folder as storage location for recordings.
PAUSE TV BUFFER
Here you can set the duration of a timeshift recording (AUTO, 30 MINS, 1HR, 2HR)
TIMER
(not in ATV
mode)
In this menu you will see an overview of all of the timer recordings that
you have programmed.
DEL
Select the programmed timer recording that you want to delete.
DEL ALL
With this function you can delete all of the programmed timer
recordings.
ADD
Save a new timer
recording.
RECORDER
Activate/deactivate timer recording function
TYPE
Select the reception type DTV or RADIO.
CHANNEL
Select the required channel.
START TIME
Select the start time.
DURATION
Select the duration.
DATE
Select the date.
MODE
Set whether you want the timer recording to
be once, daily or weekly.
EDIT
Changes to existing timer recordings can be made here.
RECORD LIST
Call up the recording list. You can delete the selected recordings with the
red button (DELETE). You can also call up the recording list directly using
the REC LIST button on the remote control.
RECORDER
START
Press OK to start the recording. You can also do this directly on the
remote control via the REC button.
Page 25
24 of 42
7.6. Setup Menu
2N ([LW 0HQX
Exit ReturnOKMove
Setup
Off
OK
OK
Setup
OSD Timer
PC Setup
Blue Screen
Reset TV Setting
Auto Installation
Software Upgrade
Picture
Sound
Channel
Feature
OK
OK
Aus
Menu Item Setting
OSD TIMER
Set the time after which the OSD menu will close automatically.
PC SETUP
Change the PC settings in PC mode.
AUTO
ADJUST
If you want to shift the image, select AUTO ADJUST and press
OK to move it back to the centre. This should be done in the full
image mode to ensure the settings match.
H POSITION
You can use to change the horizontal position of the picture.
V POSITION
You can use to change the vertical position of the picture.
PHASE
If the PC picture is not clear, you can use to adjust the picture
signal to suit the LED-Backlight TV pixels. This will result in a clear
image with an even, sharp display.
CLOCK
With this setting, the picture signal is synchronised to match with
the monitor’s pixel rate. This corrects errors that can appear as
vertical stripes in pixel-dense images (like tables or text with small
fonts). Set the pixel frequency using .
BLUE SCREEN
(not in DTV mode)
If the LED-Backlight TV is not receiving a signal, the screen will turn blue instead of
displaying the “snow” or a black background.
RESET TV SETTING
Restore the factory settings here. This allows you to reset the device or the memory.
AUTO INSTALLATION
Here you can access the menu for the initial installation.
SOFTWARE UPGRADE
Here you can carry out a software update for the device with the help of a USB storage
medium.
OTA UPGRADE
Here you can start the OTA upgrade (On-the-Air) when a new software is available for
your LED-Backlight TV. The OTA upgrade only works in case that a new software is
available.
Page 26
EN
25 of 42
8. Media Mode
The LED-Backlight TV comes with 1 USB port (rear) that can be accessed via Media mode.
8.1. Media Mode and USB Connectivity
Plug in your external USB device (USB memory stick, external hard disk drive) into the USB port of the TV. Drive
numbers (C:\, D:\, E:\ etc) will be allocated depending on the partitions of the USB device (e.g. an external hard
disk drive might have several partitions). For the definition of how drive numbers are assigned, please see “Drive
Assignment Definition” below. (Please note that external USB memory devices of a capacity of up to 1 TB are
supported. However, not all brands and drivers of external USB memory devices might be compatible with this LEDBacklight TV )
You can select the drive for your recording session.
Please note that the external USB device needs to be formatted first before the recording can be done. To do this,
under DTV mode, in the OSD, go to PVR/PAUSE TV page then select PARTITION SELECT and “FORMAT”.
Select disk drive by pressing “OK”.
At the next screen you will have option to select USB device if there is more then one and to select drive with
directional pad on the remote control (C:\, D:\ etc)
Press “OK” to fo r mat.
You can select to format the USB device into FAT32 file system or High Speed FS system by using directional pad on
the remote control:
− FAT32 is suitable for USB thumb drive (USB memory sticks) that will format the entire USB drive completely.
(Attention: All data currently on the USB memory stick will be lost. Please save your data on your external USB
memory stick prior to using it as a recording device)
− High Speed FS is suitable for external USB hard disk drives that will allow choosing how large a new partition
allocated for recording will be.
− While recording, on your external USB device a new folder will be created labelled “PVR”.
The OSD will show the file format and size selected, how many minutes of the TV program can be recorded in either
SD quality or HD quality from the source media.
After selecting the system type and size, press OK again will start the formatting.
After the USB device has been formatted, it can be used for recording under DTV mode.
The default recording drives will always be C:\, unless different drive is selected using method from 2-7.
The recording function can be achieved in 2 ways:
− Press the REC button directly while watching DTV programs.
− Go to PVR/PAUSE TV page then select „RECORDER START“
8.2. Recording via REC Button
While watching DTV programs, press the REC button on the remote control.
A symbol for recording will be shown in the upper left-hand corner of your screen.
Make sure that the allocated capacity for the recording is sufficient to complete the recording of the program you want
to save. (The capacity is determined by how large the formatted PVR file folder is allocated, or how large the USB thumb
drive can support.)
8.2.1. Time Shift Function
During any recording, you can press the “PLAY” button to start watching the program that is being recorded. The
recording itself will continue in the background while you can watch the recorded program from the start.
While watching/playing the recording program this way, you can use all the media functions (fast forward, fast
backward and pause etc) for the playback.
Press the STOP button to stop the watching session and return to the recording interface.
8.3. Switching between TV Mode and Media Mode
Use INPUT to call up the source selection list.
Use the direction buttons to go to Media.
Confirm your selection by pressing OK.
Repeat this process to return to TV mode but, instead of selecting Media, choose the option ATV or DTV,
depending on the type of signal.
Page 27
26 of 42
8.4. Media Menu System
If you attach a USB storage medium to the LED-Backlight TV, you can play back photos, music, videos or text. The
supported formats can be found in the technical data at the end of these instructions.
PLEASE NOTE!
Certain types of USB devices may not be compatible with this LED-Backlight TV.
Connect the USB device directly. Do not use a separate cable, as compatibility problems may arise.
Never remove the USB device while a file is being played. In particular, you should not plug in and unplug the
USB device several times in quick succession.
8.5. Media Player Access
Connect the USB storage medium to the USB connection on the side of the device.
Press the KPRWV button and use to select the source OGFKGP.
Press QM"to confirm.
8.6. Media Player Menu
After accessing the media player via USB as described above, you are taken to the main menu.
The following options are available:
− PHOTO – for photo playback
− MUSIC – for music file playback
− MOVIE – for video file playback
− E-BOOK – for text file playback
Use to select the corresponding menu and confirm with OK.
Now select the source from which you want to play the file (e.g. USB stick or hard drive).
In the menu of the respective media PHOTO, MUSIC, MOVIE, E-BOOK you can delete an object using the red
button. Use the green button to delete or accept all the files in the playlist.
To leave the media player, press the KPRWV button and select another source (if required).
8.7. Display of Photos / Images
If you select PHOTO from the main menu, all the available image files will be filtered and displayed on the screen.
If there are several folders on the storage medium, use to select the folder and confirm with QM.
Use to select the required photo and press QM to select it for the playlist. You can select several photos for
the playlist using OK. You can also use OK to remove already selected photos from the playlist.
By pressing the button, the previously selected photo will be shown.
During playback press OK to call up the playback options.
Use the buttons to select an option and confirm with QM.
− PLAY/PAUSE /: Start/pause the slide show
− STOP : Stop slide show playback
− NEXT/PREVIOUS / : Show next/previous photo
− ROTATE -/+ : Rotates the selected photo by 90 degrees clockwise/anticlockwise
− ZOOM : Zoom in/out of the selected photo
− INFO : Shows information about the displayed photo
− PHOTO SETUP : Edit the following options:
• REPEAT MODE: Set the repeat function for the slide show
• BACKGROUND MUSIC: Turn background music on/off
• MUSIC SOURCE: Select a source for the background music
• SLIDE TIME: Set display time for the photos
• EFFECT: Turn effects on/off
− PLAYLISTS : Shows the photo playback list
The buttons on the remote control can also be used for playing back files.
Press the GZKV button to return to the previous menu.
Page 28
EN
27 of 42
8.8. Audio Playback
If you select MUSIC from the main menu, all the available music files will be filtered and displayed on the screen.
If there are several folders on the storage medium, use to select the folder and confirm with QM.
Use to select the required music track and press QM to select it for the playlist. You can select several
tracks for the playlist using OK. You can also use OK to remove already selected tracks from the playlist.
By pressing the button, the previously selected music track will be played. Below the playback window you will
find the playback options.
Use the buttons to select an option and confirm with QM.
− PLAY/PAUSE /: Start/stop music playback
− STOP : Stop playback of the music track
− FB/FF /: Fast rewind/forward
− PREVIOUS/NEXT
/ : Play back previous/next track
− GOTO TIME : Jump to a specific time within a track
− REPEAT MODE : Set the repeat function for the tracks
− INFO : Shows information about the selected track
− DISPLAY ON/OFF : Switch the TV display on/off and the back light (the blue button has the same
function)
The buttons on the remote control can also be used for playing back files.
Press the GZKV button to return to the previous menu.
8.9. Video Playback
If you select MOVIE from the main menu, all the available video files will be filtered and displayed on the screen.
If there are several folders on the storage medium, use to select the folder and confirm with QM.
Use to select the required video and press QM to select it for the playlist. You can select several videos for
the playlist using OK. You can also use OK to remove already selected videos from the playlist.
By pressing the button, the previously selected video will be played.
During playback press OK to call up the playback options.
Use the buttons to select an option and confirm with QM.
− PLAY/PAUSE /: Start/stop video playback
− STOP : Stop playback of the video
− FB/FF /: Fast rewind/forward
− SLOW MOTION : Slow motion playback
− STEP : Frame advance
− SET A-B : Repeats a certain section of a video
− PREVIOUS/NEXT / : Show previous/next video
− PLAYLISTS : Shows the video playback list
− INFO : Shows information about the displayed video file
− MOVIE SETUP : Edit the following options:
• PROGRAM: Make programming settings
• SUBTITLE: Switch subtitles on/off
• AUDIO: Make audio settings
• REPEAT MODE: Set the repeat function for the videos
− GOTO TIME : Start video from a certain time point
The buttons on the remote control can also be used for playing back files.
Press the GZKV button to return to the previous menu.
Page 29
28 of 42
8.10. Text Playback
If you select E-BOOK from the main menu, all the available text files will be filtered and displayed on the screen.
If there are several folders on the storage medium, use to open the folder and confirm with QM.
Use to select the required text and press QM to select it for the playlist. You can select several texts for the
playlist using OK. You can also use OK to remove already selected texts from the playlist.
Press the button to display the previously selected text.
The following options are available:
− RED BUTTON: Add/remove bookmarks
− GREEN BUTTON: Jump to a specific location within a document
− YELLOW BUTTON: Open/close overview of all bookmarks
− BLUE BUTTON: Shows the text document playback list
− PAGE +/-: Turn page forward/back
The buttons on the remote control can also be used for playing back files.
Press the GZKV button to return to the previous menu.
9. PVR Function
You can use your LED-Backlight TV to record TV programmes on a USB storage medium (e.g. USB stick). You can store
recordings directly, after a time delay or according to programmed settings. Channels that are encrypted with a CI+
module cannot be recorded.
Before it is possible to make a recording, you must make the required settings in the FEATURE > PVR/PAUSE TV
menu.
9.1. Direct Recording (Start/Stop)
Start by selecting the TV channel that you want to record.
Press the REC button. The recording starts.
To stop the recording, press STOP. A prompt appears. Stop the recording with YES or press NO to continue
recording.
9.2. Scheduled Recording
You can programme broadcasts and record them at a predefined time, see FEATURE > PVR/PAUSE TV > TIMER
menu.
9.3. Playback of Recorded Files
Recordings are played back via the media player. All programmes can be found via the
RECORD LIST on the corresponding data storage medium. The recording list can be called up directly using the REC
LIST button.
Page 30
EN
29 of 42
10. EPG - Program Guide
Open the Electronic Program Guide with the EPG button. This function will only be available to you in the DTV Mode.
You will see the current and the next station in the Table.
Select a program with.
Go to the program guide of the program selected with
Scroll through the stations with .
Use the EXIT button to exit the programme guide.
PLEASE NOTE!
The program information displayed is created by the broadcaster. It will not be an error in your LED-Backlight
TV if no program information is shown.
The following Table shows the options for the PROGRAM GUIDE:
Button Item Function
Red button
DAILY/WEEKLY
Changes the programme guide display (daily/weekly view)
Green
button
REMINDER
Pressed once:
Adds a reminder for the selected programme to the timer list. As soon as
the programmed time is reached, the device automatically switches to the
programmed broadcast.
Pressed twice:
Adds a timer recording to the recording list. As soon as the programmed
time is reached, the device automatically starts recording the
programmed broadcast.
Yellow
button
PREV DAY
Browses to the view of the previous day. By pressing the button
repeatedly, you can browse back through several days (but not before the
current day).
Blue button
NEXT DAY
Browses to the view of the next day. By pressing the button repeatedly,
you browse forwards through several days.
DISPLAY
INFO
Shows a detailed description of the selected programme (if available)
Press the button again to hide the description.
Page 31
30 of 42
11. DVD Mode
The built-in DVD player is run in DVD mode.
11.1. Switching from TV to DVD mode
Use INPUT button to open the source selection list.
Use the direction buttons to go to DVD.
Confirm your selection with OK.
To return to TV mode, repeat this process. But instead of DVD, now select the option ATV or DTV, depending on
the type of signal.
11.2. Inserting a DVD
PLEASE NOTE!
The built-in DVD player drive only plays media (discs) with a 12 cm diameter. Do not insert media with
a smaller or larger diameter into the DVD tray to avoid damaging the device.
PLEASE NOTE!
You must insert the DVD with the printed side facing towards the rear (the rear of the LED-Backlight TV). To
enable you to
insert a DVD into the DVD tray, the LED-Backlight TV must be in DVD mode.
Insert the DVD in the slot with the printed side facing the rear. If the TV is in DVD mode, the DVD will be
automatically recognised and drawn into the machine. The display CLOSE appears on the screen followed by
LOADING. Normally, the DVD will start to play automatically.
PLEASE NOTE!
In some cases, you may need to start the playback manually.
11.3. Button function
11.3.1. Special screen message
If you select a function that is not available on the inserted media or cannot be accessed in the current mode,
the not valid symbol shown to the left will be displayed. The symbol disappears after a few seconds.
11.3.2. PLAY
Press the (PLAY) button to start or pause playback. To resume playback, press the (PLAY) button again.
11.3.3. STOP
Press (STOP) once to stop the playback. In this mode you can continue the playback from the same place using
(PLAY).
Press (STOP) again to completely stop the DVD. The device is now in stop mode.
11.3.4. SKIP
During playback, press the SKIP or button to jump backwards or forwards (in DVDs: from chapter to chapter;
otherwise: from title to title).
PLEASE NOTE!
Please note: on many DVDs, it is not possible to skip the track/chapter before the actual film starts (see licence
notes).
11.3.5. Fast forward/rewind
Press the or button during playback to fast forward or rewind. The speed increases if you press the button
repeatedly: 2X > 4X > 8X > 16X > 32X. Pressing the button again or pressing (PLAY) returns to normal
playback speed.
Page 32
EN
31 of 42
11.3.6. Audio Settings (Language)
Press D.LA N repeatedly to select another audio setting on the DVD (e.g. two-channel audio or 5.1 channel surround
sound) or the required spoken language. The change is made immediately and does not need to be confirmed.
PLEASE NOTE!
Please note that this function is not available on all DVDs.
11.3.7. Subtitle (Language)
Press the D.SUB button repeatedly to select a different subtitle language – if subtitles are available on the DVD. The
change is made immediately and does not need to be confirmed.
11.3.8. DVD Player Menu
Using the red button and D.MENU, you can open the menus stored on the DVD.
The D.MENU button usually opens the main menu and the red button the track menu. You navigate through the items
in the DVD menus using the direction buttons. Confirm each selection with OK.
PLEASE NOTE!
Please note, it will depend on the DVD as to which requests open which menus.
11.4. Navigating between Audio & Picture (MP3 & JPEG)
The music tracks on MP3 and JPEG data media may be organised into folders just like on other data media.
Insert an MP3 or JPEG CD into the player. A menu appears on the screen, showing the top-level folder structure.
If the data medium contains folders, they are listed above each other here.
An MP3 file is displayed by an MP3 symbol.
The surface of the active folder or file is shaded orange. The total number of the files in the folder appears in the top
row.
Use the arrow keys to navigate to a folder and confirm your selection with OK.
The other sub-folders may also be opened (if available). In this case, you can return to the higher-level menu, using
the left arrow key or via the top menu item.
To listen to a particular track or view a particular picture, select it and confirm with (PLAY) or OK.
JPEG Files (Photos & Images)
With JPEG images you will see a preview of the image on the right-hand side of the menu.
Select an image and confirm with OK to view the image full-screen. All of the images within the active folder will be
displayed in succession after the selected image (“slide show”).
Pressing the direction buttons during playback rotates the image.
Please note that it may not be possible to display extremely large images.
11.5. DVD Player Setup
In DVD mode, press the D.SE T button. The SETUP menu main page appears on the screen. The following menus are
active in DVD mode:
GENERAL SETUP PAGE
AUDIO SETUP PAGE
DOLBY DIGITAL SETUP
PREFERENCE SETUP PAGE
11.5.1. Navigating in the Menus
Choose between the menus using . The active menu is shaded orange. Use to select the menu options.
The selectable options are displayed on the right-hand side. The active setting is highlighted in brown.
To change a setting, use to go to the right side and use to choose another item. Press OK to confirm.
Press to return to the higher level menu.
You can leave the setup menu at any time by pressing SETUP.
Page 33
32 of 42
11.5.2. Menu: General Setup Page
TV Display Mode
Here you set the unit’s display format to match that of the television.
4:3 PAN SCAN: Selection for televisions with a 4:3 format. The Pan
Scan format displays 16:9 film formats at full height; side sections of
the image are cut off.
4:3 LETTER BOX: Selection for televisions with a 4:3 format. The
letterbox format reduces the 16:9 film format to the width of the
screen.
WIDE: Selection for televisions with a 16:9 format.
OSD Language
Here you can set the OSD (on-screen display) language, i.e. the language for the device menus.
Once you select a language, the menu changes immediately.
Screen saver
If the screen saver is activated, a screen saver will appear if no buttons are pressed for 3 minutes (but not during
playback).
Last Memory
With this function, the DVD player remembers where the last DVD was at when it was stopped. When you reinsert the
same DVD into the device, playback resumes automatically from the same position. The last position on the DVD will be
remembered even if the device is switched off.
11.5.3. Menu: Audio Setup Page
Select the AUDIO SETUP PAGE menu item to set the sound mode.
Audio Setup Page
If you use the analogue output, you can change the loudspeaker
settings from this menu.
SURROUND: Choose this setting if you wish to play surround
sound.
STEREO: This option produces stereo sound. Choose this setting
when the sound is only being output via two speakers.
11.5.4. Menu: Dolby Digital Setup
Dynamic
The Dolby Digital sound format supports a dynamic setting which you can use to set the volume difference between
quiet and loud passages on a scale of OFF to FULL in nine steps.
OFF: The sound is reproduced without changes, i.e. loud passages
and bass sounds are loud and quiet passages are quiet (cinema
sound). This setting is only appropriate if nobody will be disturbed.
FULL: Volume differences are minimised, i.e. loud passages are
quieter and quiet passages are louder. This setting is appropriate, for
example, at night.
To change the setting use to navigate to the scale on the right-
hand side and then use or to select the desired value. Press
OK to confirm.
-- General Setup Page --
TV Display Mode
OSD Language
Screen Saver
Last Memory
16:9
ENG
On
On
DOLBY
Audio Setup Page
DOLBY
-- Audio Setup Page --
-- Dolby Digital Setup --
Dynamic
DOLBY
Page 34
EN
33 of 42
11.5.5. Menu: Preference Setup Page
TV type
Select the colour standard of your television here:
PAL: Usual colour format in many European countries.
MULTI: Format is set automatically.
NTSC: Usual colour format in North America.
Audio
The DVD’s default language track is preset here, provided the DVD has
multiple language tracks.
Subtitle
Here you can set the default language for the subtitles stored on the DVD, provided it contains subtitles.
Disc Menu
Here you can choose the language for the menus stored on the DVD, provided multiple languages are available on the
disc.
Parental
You can set the authorisation level for DVDs (parental control) here.
Some DVDs and CDs are coded with the encryption signals of the authorisation classes established by the Motion
Picture Association. The eight authorisation classes are:
1 KID SAFE: Suitable even for small children;
2 G: For all age groups;
3 PG: Recommended from age six, under parental guidance;
4 PG13: Recommended from age 12;
5 PGR: Recommended for children aged 16+, under parental guidance;
6 R: Not suitable for under 16s;
7 NC17: Not suitable for under 18s;
8 ADULT: Adults only.
For example, if you have inserted a DVD that is coded with authorisation class 7 (18+) or 8 (ADULT) and you have
selected authorisation classes 1 to 6, a message appears and the viewer must enter a password. Parts of a DVD – certain
scenes, for example – may also be encoded with an authorisation class or a range of authorisation classes.
Password
Here you can set the password for activating or changing the authorisation classes.
Confirm the CHANGE entry with OK.
OLD PASSWORD: Enter the existing password using the number keys on the remote control. It comprises exactly
four digits. If no password has been entered, the default password is valid: 123456. If you have entered the correct
password, the next field is activated for your entry.
NEW PASSWORD: Enter a four-digit password using the number keys on the remote control. The selection moves
to the next field.
CONFIRM PWD: Enter the four-digit number again.
Press OK to confirm the new password.
If you forget the new password, enter the master password 4711.
Default
Confirm the RESET twice with OK to restore the device to its factory settings.
PLEASE NOTE!
Please note that changed passwords will not be reset!
-- Preference Setup Page --
TV T y p e
Audio
Subtitle
Disc Menu
Parental
PAL
ENG
ENG
ENG
Password
Default
DOLBY
Page 35
34 of 42
12. Troubleshooting
Malfunctions can sometimes have quite trivial causes, but on other occasions they are the result of defective
components. We would like to give you a few options for rectifying your problem. If these tips don’t do the trick, then
we’ll be more than pleased to help you out. Just give us a call! You’ll find the phone numbers on the back inside cover,
under the warranty conditions.
Fault Solution
There is no picture and no sound. • Check if the power cable is inserted properly into the socket and
connected properly to the device.
• Check if the signal receiver is set to TV.
• Check to ensure the switch on the power cable is on.
There is no picture. There is no AV
picture.
• Check to ensure the contrast and brightness settings are correct.
• Check if all external devices have been connected properly.
• Check to ensure you have selected the correct AV source.
There is no sound. • Ensure that the volume has not been set to the minimum level.
• Ensure the mute setting is not active.
There is no picture and no sound. I
can hear noise, though.
• The reception might be poor. Check if the antenna is connected
properly.
The picture is not clear. • The reception might be poor.
• Check if the antenna is connected properly.
The picture is too bright or too dark. • Check the settings for contrast and brightness.
The picture is not sharp. • The reception might be poor.
• Check if the antenna is connected properly.
• Check the settings for sharpness and noise reduction in the PICTURE
menu.
There is a double/triple picture. • Check if the antenna is aligned properly.
• Waves might be reflected off buildings or mountains.
The picture is pixellated. • There might be interference from cars, trains, power lines, neon lights,
etc.
• There might be interference between the antenna and power cables.
Position the cables further apart.
There are stripes on the display or
the colours are faded.
• Is there interference from another device?
• Transmission antennae on radio stations, amateur radios and portable
phones can also cause interference.
• Operate the device as far as possible from the device that might be
causing the interference.
The buttons on the device are not
working properly.
• The child lock might be on.
The remote control does not work. • Check if the batteries are fully charged and have been inserted in the
right direction.
• Ensure the sensor field is not exposed to strong light.
• Switch off the device at the power cable and then on again.
• Check if the TV function is active by pressing the TV button on the
remote control.
Disc
The disc does not play even though
(PLAY) has been pressed, or
stops again immediately
• Is the disc inserted with the title (printed) side facing forwards?
• Check whether the disc is damaged by trying another disc. If the disk is
dirty, clean it carefully, wiping it from the centre to the edge with a soft,
dry cloth.
• DVD: Does the DVD have the correct regional code (2)?
• If condensation has formed inside the device: leave the player for one to
two hours to dry off.
Page 36
EN
35 of 42
12.1. Do You Need More Help?
If the suggestions in the previous section did not rectify your problem please contact us. The following information
would help us:
• What is the MD Number?
• What external devices are connected?
• What messages appear on the screen?
• When operating the device, at which step did the problem occur?
• If you have a PC connected to the device:
− How is your computer configured?
− What software were you using when the problem occurred?
• What steps have you already taken to try and rectify the problem?
• Please provide your customer number if you have one.
13. LED-Backlight TV pixel faults
Despite the most modern production methods, the highly complex technology
involved in producing this type of device means there may be individual or multiple
pixel drop-outs (dead pixels). This is rare, however.
For active matrix TFTs with a resolution of 1920 x 1080 pixels, which are each made
up of three sub-pixels (red, green, blue), there are a total of approx. 6.2 Mio. control
elements in use. Occasionally one or more pixels can fail or become incorrectly
controlled because of this very high number of transistors and the associated
extremely complex manufacturing processes used.
Pixel fault class Defect type 1
continuously
lit pixel
Defect type 2
continuously
black pixel
Defect type 3
Defect sub-pixel
lit black
00000
I112
1
0
1
3
5
II 2 2 5
5-n*
0
0
2xn*
10
III 5 15 50
50-n*
0
0
2xn*
100
IV 50 150 500
500-n*
0
0
2xn*
1000
n*=1.5
The permitted number of faults of the above-mentioned types in every fault class is based on a number of one million
pixels and must be recalculated in accordance with the actual physical resolution of the display.
5 Pixel
Rows
Sub-Pixel
Pixel
blue
green
red
5 Pixel
Page 37
36 of 42
14. Cleaning
You can increase the lifespan of your device as follows:
WARNiNG!
Always unplug the unit and disconnect all cables before cleaning.
• To protect the LED-Backlight TV from scratches, protective film has been applied to the high-gloss finish. Remove
the films after you have set up the LED-Backlight TV set correctly.
• If the high-gloss finish becomes dirty, wipe off the dust first. Then wipe down gently with a cleaning cloth. If you
do not wipe off the dust first, or if you apply too much pressure when wiping down the high-gloss finish, you could
scratch the high-gloss finish.
• Do not use solvents, corrosive or aerosol detergent to clean.
• Clean the screen with a soft, lint-free cloth.
• Ensure that no water droplets remain on the LED-Backlight TV. Water droplets may result in permanent
discolouration.
• Do not place the screen in strong sunlight or near ultraviolet light.
• Store the packaging material in a safe place; only use this box to transport the LED-Backlight TV.
ATTENTION!
None of the parts inside the housing require cleaning or maintenance.
15. Disposal
Packaging
Your device has been packaged to protect it against transportation damage. Packaging materials are raw
materials and can therefore be reused or recycled.
Device
At the end of its service life, the device should not be disposed of with the household rubbish. Ask your local
authority on proper environmentally friendly disposal facilities.
Batteries
Do not dispose of used or defective batteries in the household rubbish. Batteries should be taken to a
collection point for used batteries.
Page 38
EN
37 of 42
16. Technical Data
LED-Backlight TV
Device name: E12009 (MD 21259)
Nominal voltage 100–240 V ~ 50 Hz
Screen size 54.6 cm (21.5") LCD; 16:9 display
Power consumption max. 36 watts
Power consumption on standby: < 0.5 W
Speaker output 2 x 3 W RMS
Physical resolution: 1920 x 1080
TV system PAL, SECAM, B/G, D/K, I, L/L'
Programme positions 199 (ATV), 400 (DTV)
External power supply
Model number DC12030012A
Input AC 100-240V ~ 50/60Hz; 0,9A
Output DC 12V
3A;
Bands
VHF (bands I/III)
UHF (band U)
HYPERBAND
CABLE TV (S1–S20) / (S21–S41)
DVB-T (free to air)
Connections
1 x Antenna In
1 x USB In
Video
1 x HDMI® In
1 x SCART
1 x VGA In (15 Pin D-Sub)
1 x Composite video In (3.5 mm mini-jack adaptor)
1 x Component In (YUV) (3.5 mm mini-jack adaptor)
Audio
Stereo Audio In for Composite Video / YUV (3.5 mm mini-jack adaptor)
Headphone jack (3.5. mm jack)
PC Audio In (3.5 mm jack)
Digital Audio Out (SPDIF) (coaxial)
Drives/storage media
Drives Disk, USB
Supported formats via USB
1
Photo: JPG, PNG, BMP, JPEG
Music: MP3, WMA, OGG
Film: MPEG 1/2/4, MKV, Xvid, AVI, MP4, Quicktime
Text: TXT
Capacities: USB max. 1 TB
Supported formats via DVD
1
Photo: JPG
Music: MP3
Film: MPEG 1/2/4, Xvid
Compatible disc formats DVD+R/RW, DVD-R/RW, CD-R, CD-RW
Laser class DVD player Class 1 laser
PLEASE NOTE!
These days, there are many non-standard CD recording methods, copy protection methods, and also a
wide variety of blank CD-R and CD-RW discs. This can occasionally lead to read errors or delays. This does
not mean that the device is faulty.
When playing audio CDs, please check the label.
COMPACT
DIGITAL AUDIO
Page 39
38 of 42
Remote control
Transmission type: Infrared
LED class 1
Battery type 2 x 1.5V AAA
1
Dimensions/ambient temperatures
Permissible ambient temperature 5°C–35°C
Permissible relative humidity 20%–85%
Dimensions without stand
(W x H x D)
approx. 510 x 308 x 50 mm
Dimensions with stand
(W x H x D)
approx. 510 x 345 x 161 mm
Weight with stand approx. 3.3 kg
Weight without stand approx. 2.7 kg
Wall mounting Vesa standard, hole spacing 100 x 100 mm
2
2
1
Due to the large number of different codecs, it is not possible to guarantee playback of all formats
2
Wall mount not supplied. When mounting the device, make sure that you use M4 screws. The length of the screws
corresponds to the thickness of the wall bracket plus a max. of 8 mm.
Page 40
EN
39 of 42
17. Legal Notice
Copyright © 2014
All rights reserved.
This operating manual is protected by copyright.
Mechanical, electronic and any other form of reproduction is prohibited without the written
permission of the manufacturer
Copyright is owned by the company:
Medion AG
Am Zehnthof 77
45307 Essen
Germany
The operating manual can be reordered via the service hotline and is available for download via the service portal at
www.medion.com/gb/service/start/.
You can also scan the QR code above and download the operating manual onto your mobile device via the service
portal.
Page 41
40 of 42
Page 42
18. Index
A
Auto Installation .....................................................................12, 24
B
Batteries .............................................................................................. 5
Blu-Ray Player .................................................................................15
C
Channel menu ................................................................................20
Channel selection ..........................................................................13
Cleaning ............................................................................................36
Connecting
Aerial ............................................................................................. 11
Blu-Ray player ............................................................................15
Headphones ............................................................................... 15
SAT receiver ................................................................................16
Video recorder ........................................................................... 16
D
DVB-T mode ....................................................................................11
DVD mode ........................................................................................30
DVD player .......................................................................................15
F
Favourites .........................................................................................14
Feature menu ..................................................................................21
Front .....................................................................................................7
Full HD ................................................................................................. 3
I
Initial operation ..............................................................................10
Installation .......................................................................................10
M
Media mode ....................................................................................25
O
Operating safety ..............................................................................4
Operation .........................................................................................13
OSD menu ........................................................................................18
P
Picture menu ...................................................................................19
Picture settings...............................................................................13
Pixel faults ........................................................................................35
Power supply ....................................................................................5
Program guide ................................................................................29
PVR ...............................................................................................23, 28
R
Rear .......................................................................................................8
Remote control ................................................................................9
S
Safety instructions ..........................................................................4
Operating safety ..........................................................................4
Power supply .................................................................................5
SAT receiver .....................................................................................16
Setup menu .....................................................................................24
Sound menu ....................................................................................19
T
Technical data .................................................................................37
Timeshift ...........................................................................................23
Troubleshooting ............................................................................34
V
Video recorder ................................................................................16
Volume settings .............................................................................13
Page 43
42 of 42
Page 44
21.5” LED TV & DVD Combi
MEDION
Support“ section of our website at www.medion.co.uk.
03/2014
UK
120 Faraday Park, Faraday Road, Dorcan
To contact us by email please visit the „Service and
Medion Electronics Ltd.
Swindon SN3 5JF, Wiltshire
United Kingdom
Hotline: 0871 37 61 020
(Costs 7p/min from a BT landline,
mobile costs may be higher)
Fax: 01793 71 57 16
www.medion.co.uk
IRE
Medion Electronics Ltd.
120 Faraday Park, Faraday Road, Dorcan
Swindon SN3 5JF, Wiltshire
United Kingdom
Hotline: 1 800 992508 (free phone)
To contact us by email please visit the „Service and
Support“ section of our website at www.medion.co.uk.
Fax: 01793 715716
www.medion.co.uk
Instruction Manual
Loading...