Medion Akoya XL Instruction Manual

NOTES ON THIS MANUAL

Keep these instructions with your computer at all times. The
proper set up, use and care can help extend the life of your
computer. In the event that you transfer ownership of this
computer, please provide these instructions to the new owner.

This manual is divided into sections to help you find the infor­mation you require. Along with the Table of Contents, an In-
dex has been provided to help you locate information.

In addition, many application programs include extensive help
functions. As a general rule, you can access help functions by
pressing F1 on the keyboard. These help functions are available
to you when you use the Microsoft Windows

®

operating system

or the various application programs.

Windows

xp

invites you to a tour (notes on the task bar) to famil­iarize yourself with the operating system. We listed further useful
sources of information starting on page 54.

AUDIENCE

These instructions are intended for both the novice and ad­vanced user. Regardless of the possible professional utilization,
this Notebook is designed for day-to-day household use. The
functions and applications for use with this Notebook have been
designed with the entire family in mind.

ii

DOCUMENT YOUR NOTEBOOK

It is important to document the details of your Notebook pur­chase in the event you need warranty service. The serial num­ber can be found on the back of the Notebook:

Serial Number ......................................

Date of Purchase ......................................

Place of Purchase ......................................

QUALITY

Medion has selected the components in this computer for their
high level of functionality, ease of use, safety and reliability.

Through balanced hardware and software design we are able to
provide you with an innovative personal computer useful for appli­cations relating to both work and leisure.

We are pleased to welcome you as our newest customer. Thank
you for choosing Medion.

SERVICE

Medion is pleased to provide individualized customer service
throughout the life of your Notebook. Please feel free to contact
a customer service representative with any questions relating to
this Notebook.

Copyright

©

2005 Medion®. All rights reserved. Microsoft®, MS-DOS®, and Windows are

registered trademarks of Microsoft Corporation in the U.S. and other countries. Pentium

®

is
a registered trademark of Intel Corporation. The names of actual companies and products
mentioned herein may be the trademarks of their respective owners.

This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be
authorised by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

Information in this document is subject to change without notice.

iii

Table of Contents:

SAFETY INSTRUCTIONS ............................................................... 3

Data Security ......................................................................... 3

Operational Safety ................................................................. 3

General Safety Information.................................................... 4

Important Additional Safety instructions ............................... 5

CD-ROM/CD-RW/DVD/DVD-RW Drive safety ......................... 6

TFT Display Safety ................................................................. 6

Set-Up Location...................................................................... 7

Ambient Temperature ............................................................ 7

Power Adapter ....................................................................... 8

Cabling................................................................................... 9

Modem ................................................................................... 9

Touch pad .............................................................................. 9

Battery operation................................................................. 10

VIEWS OF THE NOTEBOOK......................................................... 13

Open Notebook .................................................................... 13

Front and Rear View ............................................................ 14

Side Views ........................................................................... 15

Device Indicators ................................................................. 16

Wireless LAN..............................................................16

Suspend (Sleep) Mode ................................................16

Battery......................................................................16

Hard Drive/Optical Drive Access Indicator ......................16

Num Lock.................................................................. 16

Capital Lock...............................................................16

Scroll Lock.................................................................16

GETTING STARTED..................................................................... 19

The Windows® XP Desktop................................................... 21

POWER SUPPLY ......................................................................... 23

On/Off button ...................................................................... 23

Power Adapter ..................................................................... 24

Battery Operation ................................................................ 25

Inserting the Battery ............................................25

Removing the battery ........................................... 25

Charging the Battery ............................................ 26

Battery Power...................................................... 26

Checking the Battery Level .................................... 27

Power Management ............................................................. 28

Standby Mode .....................................................28

Suspend (sleep) mode .......................................... 28

DISPLAY .................................................................................... 29

iv

Opening and Closing the Display.......................................... 29

Screen Resolution ................................................................ 29

Connecting an External Monitor ........................................... 29

DATA ENTRY .............................................................................. 32

The Keyboard....................................................................... 32

Notebook-specific key combinations ....................... 32

Touch pad ............................................................................ 33

THE HARD DRIVE ....................................................................... 37

Important Directories .......................................................... 38

THE OPTICAL DRIVE .................................................................. 39

CD-RW/DVD-ROM Combo Drive ........................................... 39

Handling Discs .................................................... 39

Loading a Disc..................................................... 40

Removing a Disc.................................................. 41

Emergency Ejection of a blocked Disc ..................... 41

Playing Music CDs................................................ 42

Playing DVD Movies ............................................. 42

Writing Discs....................................................... 42

THE SOUND CARD ...................................................................... 44

External Audio Ports ............................................................ 44

MODEM ...................................................................................... 45

Modem port.......................................................................... 45

THE NETWORK ........................................................................... 46

What is a network? .............................................................. 46

Fast Ethernet-Network ......................................... 46

What do you need for networking?................................ 47

Troubleshooting within the Network .............................. 48

Wireless LAN....................................................... 49

Conditions ................................................................. 49

THE PC CARD SLOT .................................................................... 50

Use of PC-cards.................................................................... 50

Installing a PC card.............................................. 51

Removing a PC card............................................. 51

CONNECTION OPTIONS ............................................................. 52

Universal Serial Bus (USB) Port ........................................... 52

IEEE 1394 (FireWire®) ......................................................... 53

SOFTWARE ................................................................................ 54

Getting to Know Windows XP............................................... 54

Windows® XP Manual ........................................... 54

v

Windows® XP Tour ...............................................54

Microsoft® Interactive Training ............................................ 54

Windows® XP Help and Support..............................54

Software Help ...................................................................... 55

Device Drivers...................................................................... 55

Information about Your PC .................................................. 56

Digital Signatures ................................................................ 56

Windows Activation .............................................. 57

The BIOS Set-up-Program.................................................... 57

Running the BIOS Set-up ...................................... 57

Navigating the BIOS Utility .................................... 58

FAQ – FREQUENTLY ASKED QUESTIONS .................................... 61

DATA AND SYSTEM SECURITY ................................................... 63

Data Security ....................................................................... 63

Maintenance Programs ........................................................ 63

Password Reset Disk............................................................ 63

Windows® Update ................................................................ 64

Windows Update Information for Data Security.........65

SYSTEM RECOVERY.................................................................... 66

Restoring Microsoft Windows XP ......................................... 66

System Restore.................................................................... 67

Limits of Restore Factory Settings (Restore option 3) ...... 68

Performing the Restore ......................................... 69

TROUBLESHOOTING .................................................................. 70

Localize the Cause ............................................................... 70

Check Cables and Connections ............................... 70

The Power On Self Test (POST) .............................. 70

Errors And Possible Causes.................................... 71

Additional Support ............................................................... 72

Driver Support ..................................................................... 72

MAINTENANCE........................................................................... 73

Maintenance Instructions .................................................... 73

Cleaning and Care ................................................................ 73

Care of the TFT Display ........................................................ 73

Transporting the Notebook .................................................. 74

Upgrades and Repairs .......................................................... 74

Securing your Notebook........................................75

Setting a User Password ..............................................75

Using a safety lock......................................................75

Notes for Service Engineers ................................................. 76

STANDARDS............................................................................... 79

vi

Electromagnetic Compatibility ............................................. 79

Electrical Safety ................................................................... 80

Ergonomics .......................................................................... 80

Noise Emission..................................................................... 80

FCC Compliance Statement .................................................. 81

Macrovision Statement ........................................................ 82

Declaration of Conformity .................................................... 82

WARRANTY................................................................................ 84

INDEX........................................................................................ 87

vii

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

CChhaapptteerr 11

Safety and Maintenance

Subject Page

Data Security ................................................. 3

Set-up Location ............................................... 7

Ambient Temperature ..................................... 7

Power Adapter ................................................. 8

Modem .......................................................... 9

Touch Pad ...................................................... 9

Battery Operation ......................................... 10

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

2

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

3

S

S

AAFFEETTYY IINNSSTTRRUUCCTTIIOONNS

S

Please follow the instructions in this section for the safe opera­tion of your Notebook:

**

DO NOT allow small children to play unattended with electri-

cal equipment.

**

DO NOT open the case of the Notebook, the battery or the
power adaptor. When the case is open there is a danger of
severe electric shock.

**

DO NOT insert objects through the slots and openings of the

Notebook. This may lead to electric shock, electrical short­circuit or fire that will damage your Notebook.

**

DO NOT cover the slots and openings of the Notebook.
These openings are for ventilation purposes. Covering
these vents may lead to overheating.

**

This Notebook is NOT designed for use within indus­trial environments.

DATA SECURITY

The supplier does not assume liability for data
loss or damage to data storage units, and no
claims can be accepted for damages resulting
from the loss of data or consequential losses.

OPERATIONAL SAFETY

It is important to follow all of the safety instructions in this
manual to ensure the safety of you and your Notebook.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

4

GENERAL SAFETY INFORMATION

If you find that:

• the power cord/power adapter is worn or damaged.

• liquid is spilled on the unit.

• the Notebook fails to work properly.

• the Notebook is dropped or the housing is damaged.

You should:

• shut-down your Notebook immediately.

• remove the power cord from the socket.

• contact Customer Service (1-866-633-4660).

• do not restart unless you have contacted Customer Service.

How important is the information you will be storing on your
Notebook? You need to guard against the loss of your data by
making backup copies. You can backup your data onto CD or
DVD, which is dependent on the optical drive configuration of
your Notebook and the quantity of data. It is a good idea to
backup your data; this is to ensure that you have another copy
of your data should something happen to the hard drive.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

5

IMPORTANT ADDITIONAL SAFETY INSTRUCTIONS

When using any electronic equipment, basic safety precautions
should always be taken. Following the guidelines below can
reduce the risk of fire, electric shock and personal injury:

• Do not use this product near water (e.g., near a bathtub,
lavatory or kitchens sink, in a wet basement or near a
swimming pool).

• Avoid using a telephone/modem (other than a cordless
type) during an electrical storm. There is a remote risk of
electric shock from lightning.

• Do not use the telephone/modem to report a gas leak in

the vicinity of the leak.

Lithium batteries cannot handle intense pressure,
high temperatures or fire. Danger of explosion if
replaced incorrectly. Replace batteries with a com­patible type as recommended by the manufac­turer. Lithium batteries are hazardous waste and
require proper disposal. Contact the Medion Ser-
vice Center for additional information on battery
disposal.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

6

CD-ROM/CD-RW/DVD/DVD-RW DRIVE SAFETY

• CD-ROM-/CDRW-/DVD-drives are Laser Class 1
devices. These lasers must remain in their sealed
casing.

• Danger — Invisible laser radiation when open.
Avoid direct exposure to beam. This product is certi­fied by the manufacturer to comply with DHHS rules
21CFR, Chapter 1, Subchapter J, applicable at date
of manufacturer. Refer to optical drive labels for ad­ditional details.

• DO NOT remove the drive covers, as exposure to
the lasers may be harmful.

• DO NOT look directly into the laser, even when
wearing eye protection.

TFT DISPLAY SAFETY

• To avoid damage to the TFT Display, never open it
a full 180º. Do not forcibly open it.

• In order to avoid damage to the display, do not
touch it with your fingers or sharp objects.

• Never lift the Notebook by the TFT Display; doing
so could break the hinges.

• There is a risk of injury if the TFT display breaks.
Use protective gloves to pack up the broken
pieces and contact customer service to arrange for
proper disposal.

It is important to thoroughly wash your hands after
handling a broken TFT display. There is a chance
that chemicals may have been released.

• Never place objects on top of the Notebook
that would exert pressure on the display.
There is a danger that even slight pressure
may break the TFT display.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

7

SET-UP LOCATION

• Keep your Notebook and all connected peripherals away from
moisture, dust, heat and direct sunlight. Failure to do so can
lead to Notebook malfunction or damage.

• It is highly recommended you do not use the Notebook out-
doors.

• Operate the Notebook and all peripherals on a stable, balanced
and vibration-free surface.

• Do not leave the base of your Notebook on your lap or any part
of your body for a long period of time while the Notebook is
turned ON or is charging. The Notebook can become very
warm while it is turned on or charging and can cause discomfort
or injury from heat exposure.

AMBIENT TEMPERATURE

• Notebook operation is most reliable at an ambient temperature
between +41° and +104° F and at a relative humidity be­tween 30% and 70% (without condensation).

• When powered off, the Notebook can be stored at tempera-
tures between 32° and 140° F.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

8

POWER ADAPTER

• Do not open the power adapter housing. When the housing
is open there is a danger of severe electric shock. It con­tains no user-serviceable parts.

• The electric outlet must be in the vicinity of the Notebook
and within reach of the power adapter cables. DO NOT
stretch the power cables tightly to reach an electric outlet.

• To disconnect your Notebook from the power source, or set
the Notebook to battery operation, remove the power cord
from the Notebook’s power socket.

• Only use the Notebook with a power adaptor (ADP 20V65W
LISHIN0335A2065 1A325)

operating at AC 115V~/60

Hz.
In European countries use the Notebook at AC 220­240V~/50 Hz.

For details on power consumption, please refer to the rating
plate on the rear of your Notebook. If you are unsure of the
type of power supply available at the point of use, ask your
local power company. If travelling, ensure that use the
proper power cord or adapter for the area. Contact Customer
Service with questions before you travel.

• Use only the supplied power cord and power adapter.

• If using an extension cord, make certain that it meets your

local safety requirements. If in doubt, consult an electrician.

• To provide additional protection against electric shock,
power surges, lightning strikes, or other electrical damage to
your Notebook, we recommend the use of a surge protec-
tor.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

9

CABLING

• Arrange cables in a safe manner to ensure that no one can
walk on or trip over them.

• DO NOT place the cables on, near or in liquid.

• DO NOT place objects on any of the cables.

Caution – To reduce the risk of fire, use only No.
26 AWG or larger telecommunication cords (applies
to American Standards).

MODEM

• If your system has a modem, please make sure you connect

it to an analog telephone line only. Connecting to a digital
PBX, a digital line designed for broadband services or ISDN,
a shared service line or a payphone will damage the modem
or the devices to which it is connected.

TOUCH PAD

Light pressure with the tip of your finger is all that is required
to operate the touch pad. Because the touch pad is electrostatic
sensitive, objects cannot be used in place of your fingers. Using
a pen or other object can damage the touch pad or cause the
Notebook to malfunction.

S

S

AAFFEETTYY AANNDD

M

M

AAIINNTTEENNAANNCCE

E

10

BATTERY OPERATION

To extend the life and power of your battery and guarantee
secure operation, the instructions below should be followed:

• Never expose the battery to direct sunlight or heat for
long periods.

• Do not dispose of the battery by fire as they may ex-
plode. Check with local codes for possible special disposal
instructions.

• Do not open the battery housing; it contains no user-
serviceable parts.

• Disregarding these instructions will lead to damage and

under some circumstances may even cause the battery
to explode.

• Keep the battery away from electrically conductive materials, chemi­cal substances and cleaning agents.

• Only use the originally supplied power adapter to charge the battery.

• Fully discharge the battery before recharging it.

• Replace the battery only with the same type or an equivalent type

recommended by the manufacturer.

• Charge the battery only until the battery charging light goes out.
Also, refer to the instructions under "Checking the Battery Level" on
page 27 for instructions on checking the battery level.

• Only change the battery when the unit is switched off.

• Batteries are classified as special waste and should always be dis-

posed of properly. Contact Customer Service for more details. Do
Not dispose of the battery in water, and do not disassemble the bat­tery.

• Keep batteries away from children at all times.

• Use only the batteries and power adapter/cord indicated in this man-

ual.

• Handle a damaged or leaking battery with extreme care. If you come
in contact with the electrolyte, wash the exposed area with soap and
water. If it contacts the eye, flush the eye with water for 15 minutes
and seek medical attention.

• Do not charge the battery pack if the ambient temperature exceeds 45℃
(113℉ ).

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

CChhaapptteerr 22

Views of the Notebook

Subject Page

Open Notebook ............................................. 13

Front And Rear View ...................................... 14

Side Views ................................................... 14

Device Indicators .......................................... 16

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

12

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

13

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

OPEN NOTEBOOK

12

3

11

10

9

8

44

5

6

7

1

Display latch

2

Microphone

3

TFT display (Ö p. 29)

4

Stereo speakers

5

Keyboard (Ö p. 32)

6

Touch pad and keys (Ö p. 33)

7

Device indicators (Ö p. 16)

8

Power ON/OFF (Ö p. 23)

9

Silent mode button

10

Internet quick key

11

E-Mail quick key

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

14

FRONT AND REAR VIEW

1

2

3

4

5

1

External monitor (VGA) (Ö p. 29)

2

Battery pack

3

Kensington port (safety lock port) (Ö p. 75)

4

4-in-1 card reader

5

Wireless ON/OFF switch

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

15

SIDE VIEWS

4

6

3

7

12

9

12

5

8

10

11

1

LAN port (RJ-45) (Ö p. 46)

2

Modem port (RJ-11) (Ö p. 45) USB port (Ö p. 52)

3

Optical Drive (Ö p. 39)

4

PC card slot (PCMCIA type II) (Ö p. 50)

5

Microphone in (Ö p. 44)

6

Audio in (Ö p. 44)

7

SPDIF-out port

8

Ventilation grill

9

IEEE 1394 (FireWire®) (Ö p. 53)

10

USB port (Ö p. 52)

11

Power socket (Ö p. 23)

12

TV (S-Video) port

V

V

IIEEWWSS OOFF TTHHEE

N

N

OOTTEEBBOOOOK

K

16

DEVICE INDICATORS

1 2 3 4 5 6 7

LED's indicate the power and operating system states of the
Notebook. The meaning of each LED is:

1

WIRELESS LAN
Display for wireless data exchange. (optional feature)

2

SUSPEND (SLEEP) MODE
This LED lights when the Notebook is in suspend

mode.

3

BATTERY
The color of the LED light indicates the battery

status:

Blinking ORANGE: Battery is being charged.
Blinking RED: Battery is low.
Constant GREEN/BLUE: Battery is full.
OFF/No Color: Battery is not installed.

4

HARD DRIVE/OPTICAL DRIVE ACCESS INDICATOR
This LED lights when the Notebook is accessing the

hard drive or optical.

5

NUM LOCK
This LED lights when NUM-Lock has been activated.

It sets the keyboard so that numbers are assigned to
certain characters, simplifying numerical data input.

6

CAPITAL LOCK
This LED lights when CAPS-Lock has been activated.

This sets the keyboard to capital letters.

7

SCROLL LOCK
This LED indicates that the Scroll Lock key on the key-

board is activated. The Scroll Lock key has different
functions that are dependent on the software applica­tion in use.

H

H

AANNDDLLIINNG

G

CChhaapptteerr 33

Handling

Subject Page

Getting Started ............................................. 19

On/Off Button ............................................... 23

Power Adapter .............................................. 24

Battery Operation ......................................... 25

Power Management ....................................... 28

Opening and Closing the Display ..................... 29

Screen Resolution ......................................... 29

Connecting an External Monitor ....................... 29

Keyboard ..................................................... 32

Touchpad ..................................................... 33

H

H

AANNDDLLIINNG

G

18

H

H

AANNDDLLIINNG

G

19

G

G

EETTTTIINNGG

S

S

TTAARRTTEED

D

Before you start using your Notebook, take a few moments to
read the important Safety section.

This Notebook comes with fully pre-installed software. You do
not have to install software from any of the supplied CDs. How­ever, with many programs (e.g., telephone CDs or encyclopae­dias) it is necessary to insert the corresponding CD to access
the data that is stored on it. The software will prompt you to do
this when necessary.

Step 1

Before starting the Notebook, please insert the battery. For further
information read the section titled “Power Supply” starting on
page 23. Open the display (see page 29) and switch on the Note­book using the On/Off switch (see page 13.)

If the battery level is insufficient, connect the power
adapter.

Note: Make sure there is no bootable CD (e.g., the
Recovery CD) in the CD-ROM drive. Such disks will
prevent the operating system from loading off the
hard drive.

Your operating system is finished loading when a welcome screen
is shown on your display.

H

H

AANNDDLLIINNG

G

20

Step 2

The greeting procedure will guide you through a series of dia­logue boxes. The information in each dialogue box will explain
the steps that need to be taken.

Should you have any questions just click on

.

Enter Personal Details

In one of the initial start-up dialog boxes a request will appear
on the screen for you to enter your personal details. Please en­ter the requested information in the white input fields. You can
select the fields by clicking on them with the mouse. When you
press Enter, or click on the Continue button you progress to the
next window.

License Agreement

The greeting procedure also displays the license agreement.
Please read this carefully. It contains important legal informa­tion on the use of your software. In order to see the full text,
use the mouse and the scroll bar on the right side of the screen
to move downwards until you have reached the end of the
document. You accept the agreement by clicking on the “I ac-
cept the agreement” option field. Only by doing so will you be
entitled to use the product under lawful terms and conditions
and be entitled to open the sealed Windows

®

manual.

Step 3

After the login procedure the Windows® desktop appears on
your screen. This can be adjusted so that the screen of your
computer looks different.

H

H

AANNDDLLIINNG

G

21

THE WINDOWS

®

XP DESKTOP

After the login procedure the Windows® XP desktop appears on
your screen. Note: Your desktop view may vary from the image
shown below.

Start Button

Clicking the Start button brings up a menu where you can
access help, software programs, files, and settings. For
more information, click Windows

®

XP Tour on the Start

menu.

1. Program Bar

The most commonly used software programs are listed
here.

2. All Programs

All of the software programs installed on your Notebook are
ordinarily listed here. Click All Programs to reveal an ex­tensive menu.

7

9

10

8

2

1

3

5

4

6

H

H

AANNDDLLIINNG

G

22

3. Information about your PC

Click this button to receive important information about
your Notebook as well as valuable hints and additional as­sistance.

4. Turn Off Computer

Click this button to shut down Windows

®

XP and the Note-

book.

5. Task Bar

Here you receive information and status reports about Win­dows

®

XP and which programs are running.

6. Desktop Icons

Desktop icons link to their respective programs. To start a
program, double-click its desktop icon.

7. Logged in User

This tells you which user is logged in to your Notebook.

8. Control Panel

You can use the icons in Control Panel to change the ap­pearance and functionality of Windows

®

XP. These icons

represent options for configuring your Notebook.

9. Windows

®

XP Help

Here you can find information on using your Notebook, net­working, backup, and many other tasks.

H

H

AANNDDLLIINNG

G

23

P

P

OOWWEERR

S

S

UUPPPPLLY

Y

ON/OFF BUTTON

The On/Off button (page 13) is used to power up/down the
Notebook. Pressing the button briefly will turn off your com­puter using the operating system. This is the same as clicking
Start then Turn Off Computer. If the button is held down for
longer than 4 seconds, it will force the Notebook to power down
without going through the operating system shut down process.
This may be useful if your computer has crashed or stalled.

WARNING! Do not switch off your Notebook while the

hard disk or the optical drive is running and the corre­sponding media activity LEDs are lit. Otherwise data
may be lost. To protect the hard disk you should al­ways wait for 20 seconds after powering down the
Notebook before powering it up again.

Power
Button

H

H

AANNDDLLIINNG

G

24

POWER ADAPTER

Your Notebook is supplied with a universal AC power adapter,
which automatically adjusts to the available power source. The
following levels are supported: AC 100-240V~/ 50-60 Hz.
Please follow the power supply safety instructions found on
page 8.

The power adapter is connected via a power cord to an AC outlet.
The DC power lead from the power adapter is connected to the

side of the Notebook.
The adapter provides the Notebook with power and also charges the

battery. The power supply indicators of the Notebook (see page 13)
provide details on the operating state. The battery is also being
charged when you are working on your Notebook with the power
adapter.

The power adapter is still live if the Notebook is not connected
with it. You should therefore unplug the power adapter from the
outlet if it is not connected to the Notebook.

WARNING! Use only the power adapter and power
cord supplied with your Notebook.

H

H

AANNDDLLIINNG

G

25

BATTERY OPERATION

In order to extend the life and power of your battery, and to
guarantee reliable operation, it is essential that the safety in­structions on page 10 are followed.

INSERTING THE BATTERY

1. Slide the battery until it clicks into place and automatically
locks.

REMOVING THE BATTERY

1. Slide the battery latch to the left to release.

2. Pull and remove the battery when the battery latch is in a
released position.

1

2

WARNING! Do not remove the battery while the

Notebook is running on battery power. This in­creases the possibility of losing data.

H

H

AANNDDLLIINNG

G

26

CHARGING THE BATTERY

The battery is charged via the power adapter. If the power
adapter is connected, it charges the battery automatically,
whether the Notebook is on or off.

When the Notebook is switched off, full charging takes a few
hours. If the Notebook is switched on, the charging process
takes a significantly shorter time. However, it is recommended
that from time to time you discharge the battery completely
and recharge it afterwards with the Notebook switched off. You
can discharge the battery without losing data, if you turn your
Notebook on without using any application and no power
adapter. As soon as the battery is empty your Notebook will
enter the sleep mode. We recommend doing this procedure
every time you think the battery power is losing efficiency.

BATTERY POWER

A fully charged Li-Ion battery will provide power for some hours
of operation. However, the battery life will vary according to
how the power saving functions are set, the way you work, the
size of the main memory and the display type.

When working in Windows an audible warning alert will sound
as soon as the battery level drops below a set minimum value.
When this happens, the processing power is reduced in order to
save power.

NOTE: Battery warning signals and "Low-Battery"
mode will be heard immediately when the power pack
is first connected.

H

H

AANNDDLLIINNG

G

27

CHECKING THE BATTERY LEVEL

In order to check the current level of the battery, move the
cursor over the power symbol in the taskbar.

When in battery mode, a battery symbol is displayed and when
the power adapter is in use a power connector is displayed. If
the battery is being charged the power connector has a light­ning symbol superimposed over it. Further information on
power settings can be obtained by double clicking on the sym­bol.

NOTE: If you ignore the warning signal when the battery
level is low, your Notebook goes into suspend mode.
(Depending on the BIOS/OS setting this will be Save-to­Disk or Save-to-RAM).

WARNING! If the battery is empty, your data will not

be retained for long in Standby/Save-to-RAM mode.

WARNING! Never remove the battery while the
Notebook is switched on or if the Notebook has not
yet gone into suspend mode, as this may lead to loss
of data.

H

H

AANNDDLLIINNG

G

28

POWER MANAGEMENT

Your Notebook offers automatic and modifiable power saving
functions that you can use to maximize battery life and reduce
overall operating costs. The power saving modes are known as
standby mode and suspend (sleep) mode.

STANDBY MODE

When in standby mode, the contents of the RAM of your Note­book are preserved while practically all other components of
your Notebook are shut down, reducing your power consump­tion to a minimum. By pressing any key on the keypad, you can
bring your Notebook back to the fully operational state. You will
restart at precisely the line in which you were working prior to
the interruption. The computer takes less time to go into and
come out of standby mode, but uses more power than suspend
(sleep) mode.

SUSPEND (SLEEP) MODE

The sleep mode is an alternative to a complete shutdown of the
Notebook. In this mode all data from RAM (system and graphic
data) are copied to the hard disk as a file. As soon as the data
has been safely saved, the Notebook powers down. When the
Notebook is switched on again, this file is written back to RAM
by the BIOS. In a few moments the Notebook is in the exact
state as when it was last used. If while working on a document
the Notebook is closed (assuming the correct ACPI setting), the
Notebook saves the data in RAM for you automatically. You will
restart at precisely the line in which you were working prior to
the interruption. The computer uses no power while it is in sus­pend (sleep) mode, but it takes a little longer for the computer
to go into and come out of hibernation compared to standby.

H

H

AANNDDLLIINNG

G

29

D

D

IISSPPLLAAY

Y

Unlike a normal monitor, the TFT display does not produce ei­ther radiation or flicker.

OPENING AND CLOSING THE DISPLAY

A display catch keeps the display closed when the Notebook is
not in use.

To open the display, slide the display latch to release the dis­play and then lift the display to the desired position.

WARNING! The display should not be opened
fully to 180°.

DO NOT place any objects on top of the note­book. Even slight pressure may break or dam­age the TFT display.

SCREEN RESOLUTION

The integral screen has a native resolution of 1280 x 800 pix-
els. Using a higher resolution can lead to distortion of the dis­play, especially with text. Using a lower resolution may cause
the display to use only a portion of the screen area.

CONNECTING AN EXTERNAL MONITOR

The Notebook has a port for connecting an external monitor. To
connect and configure an external monitor:

1. Shut down your Notebook.

2. Connect the video signal cable of the external monitor
to the VGA port of the Notebook

(Ö p. 14).

3. Connect the external monitor to the electrical socket,
power it up and start your Notebook.

H

H

AANNDDLLIINNG

G

30

There are two options for setting up an external monitor:

1. Clone your Desktop

This option allows you to display the same picture on
both internal and external monitor.

Press <Fn> + <F4> to activate the external monitor.
The Notebook display will be switched off. Adjust the
display settings following the external monitor specifica­tion.
Press <Fn> + <F4> once more and both displays are
switched on.
Press <Fn> + <F4> again to deactivate the external
monitor. The Notebook display will be switched on.

2. Extend your Desktop

This option extends the picture from your internal
monitor to your external monitor. Windows can be
switched from one monitor to the other.

This option does not support the key combination

<Fn> + <F4>.

H

H

AANNDDLLIINNG

G

31

Right click anywhere on your desktop and select “Properties”
to start the "Display Properties" program.

• Select the "Settings" tab and left click on the sec-

ond display n.

• Check the option “extend my Windows desktop

onto this monitor” o and press “ok”.

• To deactivate the extension uncheck the option “ex-

tend my Windows desktop onto this monitor”.

You can change the resolution and color depth for either display
in this screen. However, you may have to decrease the depth of
color if you increase the resolution since the video memory has
a limited capacity.

n

o

H

H

AANNDDLLIINNG

G

32

D

D

AATTAA EENNTTRRY

Y

THE KEYBOARD

By dual assignment of certain keys, you have the same range
of functions available to you as with a normal Windows key­board. Some functions are input on a Notebook using the Fn
key plus another key. These key combinations provide access to
certain functions, see chart below.

NOTEBOOK-SPECIFIC KEY COMBINATIONS

Key
Combination

Function

Fn + F1

Enters suspend (sleep) mode.

Fn + F3

Turns ON/OFF the audio battery warning (beeping
signal).

Fn + F4

Toggles the display screen between internal moni­tor, external monitor and simultaneous display.

Fn + F5

Increases the volume.

Fn + F6

Decreases the volume.

Fn + F7

Increases screen brightness.

Fn + F8

Decreases screen brightness.

Fn +
NumLock

Enables the embedded numeric keypad. The num­bers are printed in the upper right corner of a key,
in a color different from the alphabets.
This key pad is complete with arithmetic operators
(+, -, * , /).

Press Fn+Num Lock to revert to normal character
keys.

Fn +
Scroll

Enables the scroll function. Use simultaneously with
the up and down arrow keys to move between
lines.

H

H

AANNDDLLIINNG

G

33

TOUCH PAD

The touch pad’s primary function is to move the cursor around
or select items displayed on the screen with the use of your
fingertip instead of a mouse. It is positioned in front of the key­board (see page 13). The pointer follows the direction which is
specified by moving your finger or thumb over the touch pad.

DO NOT use a ball-point pen or other object on the touch pad,
as this could damage or cause a malfunction of your touch pad.

Below the touch pad are the left and right mouse buttons which
can be used as on a normal mouse. You can also perform a di­rect click or double click using the touch pad by tapping the
surface briefly once or twice.

In the Windows Control Panel you will find a number of useful
settings that will make using the touch pad easier. If the Con­trol Panel is in category view, click Printers and Other Hard-
ware and then Mouse. In classic view, double-click Mouse.

H

H

AANNDDLLIINNG

G

34

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

CChhaapptteerr 44

Main Components

Subject Page

Hard Drive ................................................... 37

Optical Drive ................................................ 39

Sound Card .................................................. 44

Modem ........................................................ 45

Network ....................................................... 46

PC Card Slot ................................................. 50

Connection Options ....................................... 52

Software ...................................................... 55

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

36

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

37

T

T

HHEE

H

H

AARRDD DDRRIIVVEE

The hard drive is the main storage medium combining large
storage capacity and rapid data access.

The Windows operating system cannot use the full capacity of
the hard drive, which means that there will be a difference be­tween the capacity that the BIOS displays and what the operat­ing system displays.

The hard drive contains the operating system of the computer,
other application programs and backup files. These programs and
files are pre-installed on your Notebook, so you may note that
some of the space on your hard drive is already taken.

Whenever the computer is accessing the hard disk, the corre­sponding LED illuminates (see page 16).

WARNING! Never switch off the computer while the
busy indicator is lit since this may result in loss of
data.

If you are looking for a file on the hard drive and you know the
name, go to Search on the Start menu to find the file. Following
is some general information on where you might find some
common files.

Usually your hard drive is divided into several partitions, as
shown below. The partitions of your hard drive may vary from
what is shown here.

Local Disk C: Windows XP

Software programs
Your documents

BOOT D: Drivers for internal PC components

Installation files for software that came with
your PC

Recover E: Restore software

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

38

IMPORTANT DIRECTORIES

The most important directories preinstalled on your Notebook
are shown below. These directories may vary from what is
shown here.

Caution: Don't delete files unless you know what they are.
Windows XP might require these files for your computer to op­erate correctly. Also, do not alter or resize the partitions – this
will make it difficult to restore your Notebook to the factory
settings.

C:\ This is the main hard disk drive partition for your Note-

book. It is where your program files, settings, and docu­ments are stored, as well as files necessary for running
Windows XP.

C:\Program Files Includes files belonging to software pro-

grams.

C:\Windows The main directory for Windows XP.

C:\Documents and Settings Includes the settings and

documents for all users.

D:\ Includes files for restoring hardware components and

software programs.

D:\Driver Drivers for internal Notebook components.

D:\Tools Includes installation files for software that came

with your Notebook.

E:\ Includes files for restoring the entire Notebook to working

order.

E:\Recover Includes the files needed to perform a system

restore.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

39

T

T

HHEE

O

O

PPTTIICCAALL

D

D

RRIIVVE

E

CD-RW/DVD-ROM COMBO DRIVE

Your Notebook has a CD-RW/DVD-ROM combo drive. This drive
can play everything that a DVD-ROM drive can play: DVD mov­ies, music CDs, and data DVDs and CDs. It can also run soft­ware programs from CDs and DVDs. In addition, this drive can
write data and music CDs and copy CDs. It writes to CD-R or
CD-RW.

**

NOTE: Some units may come with a DVD±RW/CD-RW

Super Drive. The type of Optical Drive in a Notebook
will vary and is configuration dependent. If the opti­cal drive in your Notebook is a Super Drive, it is ca­pable of reading, writing and rewriting to CD and
DVD. The instructions in this section that pertain to
writing to CD will also apply to writing to a DVD.

HANDLING DISCS

To maintain the life of CD and DVD discs, observe these guide­lines.

• Avoid radiation by direct sunlight (UVA/UVB).

• Avoid scratches and damage to the disc surface.

• Avoid extreme temperatures.

• Do not attach labels or paper to DVD discs.

• Do not use record-cleaning or anti-static agents to

clean your discs.

We also recommend that you avoid specially shaped discs such
as hearts or polygons, or discs that are not standard size. Do
not use warped or cracked discs as they may cause damage to
your drive.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

40

LOADING A DISC

 Tip: Do not place protective foils or other stick-

ers on your CD’s. To avoid damage to your drive,
do not use deformed of damaged CD’s. Atten-
tion: Do not use scratched or dirty disks, discs
with pieces broken off or disks of poor quality.
Because of the high speeds in the drive the disks
might break and damage your data as well as
your drive. Examine the disks before you enter
them. If damage or dirt is visible, you should not
use them. Damage caused by faulty media is ex­cluded from warranty and their repair must be
charged.

1. Press the eject button on the front of the drive to open the

tray.

2. Place the disc on the tray so that it lays flat with the label

facing upward.

3. Gently push the tray in to close it.

Many discs automatically start when they are loaded and launch
a playback software program. In some cases you might need to
start a program (for example, a DVD player program).

NOTE: The location of the optical drive will vary. Please
refer to the following section for the specific location of
your optical drive, Views of the Notebook on page 13.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

41

REMOVING A DISC

Press the eject button on the front of the drive to reject the disc.

WARNING! While the Notebook is accessing the
optical drive the media activity indicator is lit. Do
not try to remove the disc from the drive while this
LED is lit.

EMERGENCY EJECTION OF A BLOCKED DISC

If the tray fails to open automatically, then the tray can be
opened manually provided there is an opening for emergency
ejection.

Restart your Notebook and if the tray is still locked proceed as
follows:

1. Shut down Windows and switch off your Notebook.

2. Insert a long thin object (like a straightened paper clip) into
the emergency ejection opening until you feel resistance.

3. Press lightly and the tray will open.

4. Remove the disc and restart the Notebook.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

42

PLAYING MUSIC CDS

Windows Media Player can be used to play music CDs.

PLAYING DVD MOVIES

To play DVD movies on your Notebook, you need a DVD play­back software program, such as CyberLink’s award-winning
PowerDVD. To play DVD movies using this software, insert a
movie DVD into the optical drive, click Start, select All Pro-
grams, and then select PowerDVD.

In spite of the high storage capability of the DVD, the data
must be extremely compressed in order for a complete feature
film to be stored. This extreme compression combined with ex­ceptional picture quality is provided by the MPEG2 image coding
method on the DVD. This places high demands on the Note­book’s processor, so when playing a DVD please close all other
applications. To increase Notebook performance, you may also
wish to purchase a plug-in MPEG2 decoder card, which has its
own decompression processor and will thus free the Notebook’s
processor.

NOTE: The decoding software included with your Note­book may be changed for regional DVD decoding up to
five times, after which the drive will only play DVD
movies for the region setting last entered.

WRITING DISCS

You can use your CD-RW/DVD-ROM combo drive to write
("burn") data and music CDs.

A data CD is a compact disc (CD) used to store PC data (for ex­ample, files and folders you have on your hard disk).

A music, or audio, CD is a compact disc (CD) used to record
music that you can play on your home or car stereo CD player.
Using a CD-R instead of a CD-RW for music CDs will help en­sure a greater level of compatibility with conventional CD­players.

There are several different options for burning CDs. The first
step for using any of these options is to insert a blank record­able CD into your combo drive.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

43

Nero Burning ROM can create different types of audio, video,
and data CDs quickly and easily. Click Start, then All Pro-
grams, then Nero, then Nero OEM to access Nero Burning
ROM. Follow the step-by-step instructions given by the software
wizard to create a CD.

Windows XP includes functionality for quickly and easily creat­ing data CDs:

1. Select the files or folders you would like to write to your CD.
To select more than one file, hold down the CTRL key while
you click the files you want.

2. In the File and Folder Tasks menu on the left (Picture Tasks
if the files are located in My Pictures), click Copy this file,
Copy this folder, or Copy the selected items. If you do
not see the File and Folder Tasks menu, select Tools on the
main menu, then Folder Options. Under Tasks on the Gen­eral tab, select Show common tasks in folders.

3. In the Copy Items dialog box, click the CD-RW, and then
click Copy.

4. Double-click My Computer, then the CD-RW. Windows dis­plays a temporary area where the files are held before they
are copied to the CD. Verify that the files and folders that
you intend to copy to the CD appear under Files Ready to be
written to the CD.

5. Under CD Writing Tasks, click Write these files to CD.
Windows displays the CD Writing Wizard. Follow the instruc­tions in the wizard.

Media player programs (such as Windows Media Player) often
offer alternatives for burning audio CDs. Refer to the help
within the program for more information.

You can also purchase third-party CD burning software for writ­ing files to a CD-R or CD-RW disc.

WARNING! Unless you own the copyright or the
permission of the owner of the copyright, unapproved
copying of copyrighted CDs or DVDs violates national
and/or international laws and can result in serious
punishment.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

44

T

T

HHEE

S

S

OOUUNNDD

C

C

AARRDD

Your Notebook has an integrated stereo sound card (on-board).

If you wish to alter the base volume, click on the loudspeaker
symbol in the task bar. A double click opens the sound mixer.

By means of the key combinations

(Ö page 32), you still have the

possibility to regulate the volume.
Use the keys Fn+F5 to increase the volume and use Fn+F6 to

decrease the volume.

EXTERNAL AUDIO PORTS

NOTE:

Port locations on your notebook may vary, see page 15.

Microphone in

(Ö page 15)

 For recording via an external microphone.

Audio out

(Ö page 15)

 For sound reproduction via external stereo equip-

ment such as loudspeakers (active) or headphones.

Your Notebook has a loudspeaker, so you can always playback
sounds without additional equipment. The connection of a Hi-Fi
system increases the sound quality significantly.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

45

M

M

OODDEEM

M

The modem is fitted with an RJ-11 interface, into which a stan­dard telephone lead can be plugged.

WARNING! Use only with an analogue tele­phone line. The modem cannot withstand the
voltage levels of digital telephone systems
such PBX or lines such as ISDN or Broadband
services.

MODEM PORT

Insert one end of the RJ11-connection (telephone plug connec­tor) into the modem/network interface and the other into an
analogue telephone socket that is easily accessible.

NOTE: Do not place the Notebook in Suspend (or
Sleep) mode if you are connected to your Internet
provider, since this will cause the modem connection
to be lost.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

46

T

T

HHEE

N

N

EETTWWOORRK

K

WHAT IS A NETWORK?

A network means connecting your Notebook to one or several
other computers. Users can transfer data between computers
and share resources such as printers, modems and hard disk
drives.

Here are some practical examples:

• You can exchange E-mail and manage appointments in an
office.

• Users can share a printer in a network and save their data
on a central server.

• Users can share one modem among computers for Internet
access.

• Two or more computers can be connected to play network
games or share data.

FAST ETHERNET-NETWORK

Your PC has a Fast Ethernet Network connection. You can use this
to connect to a network.

Connect one end to the RJ45 connection (Western plug) at the
network interface of your Notebook

(Ö p. 15) and the other to

another PC or a hub/switch.

The Windows XP Help and Support Centre offer extensive informa­tion about networking your PC. You can access this information by
clicking on Start, then Help.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

47

WHAT DO YOU NEED FOR NETWORKING?

Some requirements have to be fulfilled to successfully network com­puters:

1. The Notebook must have a network card that supports the
same network technology as the other computers on the net­work. Unless otherwise quoted, your Notebook will support the
current Fast Ethernet (10/100 Mbit) standard.

2. The network cards must be connected. You need a Shielded

Twisted Pair-cable (CAT5) that has an RJ-45-connector.

- If you want to directly connect two PCs you need a Cross-Link ca-
ble.

- If more PCs must be connected you need a supplementary dis­tributor (Hub or Switch) and a Patch cable.

3. All connected PCs need a network operating system. Win­dows

®

can act as a network operating system.

4. All networked PCs must speak the same “language” to under­stand one another. They use protocols for this purpose. The
setting of protocols, therefore, must be the same for all networked
PCs.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

48

TROUBLESHOOTING WITHIN THE NETWORK

Why does an error message appear when I click on the
network environment?

The computer name must be unique on the net­work and may not be the same as the task group.

It appears that the network boards are unable to com­municate. What might be the problem?

Maybe one of the used network boards works with a
different speed (e. g. 10 instead 100 Mbit) and
your network computer is unable to recognize this.
If necessary, set the network driver to the compati­ble speed.

If two PCs should be linked you require a cross-

link cable, otherwise use a patch cable.

In addition, check the protocols and the configu-

ration.

The data transmission is incorrect or very slow. What
might be the problem?

Maybe you have the wrong cable (UTP / CAT3 or
lower) or the problem is the proximity of a power
cord or another source of interference.

For further hints on troubleshooting search for “network errors”
in Windows Help and Support.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

49

WIRELESS LAN

Wireless LAN is an optional feature. This function allows you to
create a wireless network link with an access point or directly
with another wireless-enabled PC.
You can enable or disable the wireless LAN function by turning
the Wireless switch to the ON or OFF position, refer to

Ö p. 14.

 ATTENTION: Make sure the Wireless LAN option

is switched OFF in any environment where it
might interfere with critical and sensitive devices,
e.g., on aircraft, in hospitals and other medical
centres, etc.

CONDITIONS

An access point is a wireless transmitter that communicates with
your Notebook and controls access to the network connection
(e.g., a home network or a broadband connection such as DSL).

Wireless access points are often found in offices, airports, univer­sities or Internet cafés. They offer access to networks or to the
Internet. Access authorizations are normally needed. A fee may
be required to use a public access point. To set up a wireless net­work to share Internet access, files, and printers at home, you will
need an access point, a router, and a broadband (DSL or cable)
modem. Some access points can also serve as a router and/or a
broadband modem. Check with your retailer or Internet Service
Provider to find the best solution for your needs. A link to another
computer with wireless LAN functionality can also be created
without an access point. This will allow you to share files, but
you will need an access point and a router to share an Internet
connection.

The wireless network link works according to standard IEEE

802.11g which is also compatible with the IEEE 802.11b stan­dard. The standard 802.11a is not supported. If encrypted trans­mission is used, this must operate according to the same princi-
ple on all devices. Encryption is a method of protecting the net­work from unauthorized access. The transmission speed (max. 54
Mbps) can vary according to the distance and loading of the
partner.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

50

T

T

HHEE

PPC

C

C

C

AARRDD

S

S

LLOOTT

The PC card slot on the left side (see page 14) of the Notebook
can be used to operate credit card-sized PC cards. Most PC
cards are communications or interface devices such as ISDN-,
Faxmodem-, Network- or SCSI-adapters.

Some PC cards contain memory chips or hard disks for data
storage. If you use such cards with your Notebook, the system
assigns the card a drive name, so that you may access the re­sources. The PC card drive in your Notebook supports PCMCIA
(Type II) and CardBus (Type I) cards.

USE OF PC-CARDS

In order to run a PC card, special software is needed (drivers,
etc.). The card manufacturer usually supplies this software.
Support for the card port is a component of Windows

®

and at
present represents the optimum in operational smoothness. You
should consider this point when choosing between alternative
operating systems.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

51

INSTALLING A PC CARD

Follow the PC card installation instructions that are given for
use under Windows

®

and have the necessary driver software

ready. Once you have started Windows

®

, slip the card carefully

into the slot provided.

 Remove the dummy card from the PCMCIA Slot

before installation. Replace the card to protect
contacts against dirt if the Slot is not used.

When the card is fully inserted two audible signals will be
heard, provided it has been correctly recognized and success­fully configured.

If only one signal is heard, this signifies a problem with the card
recognition. In this case, follow the instructions that accompany
your new PC card.

REMOVING A PC CARD

To remove your PC card:

1. Press the eject button next to the slot.

 Attention! The Eject Button should be pressed

in during transportation, because the danger will
arise that the button will break off otherwise.

Eject Button

Note: The location of
the PC Card slot may
vary. Refer to Side
Views on page 15.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

52

C

C

OONNNNEECCTTIIOONN

O

O

PPTTIIOONNS

S

The Notebook has a number of input and output interfaces for
connection of peripheral devices such as a printer, scanner,
keyboard, and so on. This section presents the individual ports.
For further information, refer to page 15, where the positions of
the respective ports are described.

UNIVERSAL SERIAL BUS (USB) PORT

USB ports provide an easy way to connect many peripheral de­vices to your PC. You can use any USB device with any USB
port. 2 USB ports are located on the back panel of the Note­book and 1 USB port on the front side of the Notebook for your
convenience. Some USB devices require that you reinstall soft­ware drivers when you connect the device to a different USB
port than the one originally used. This can be avoided by al­ways using the device with the same USB port. Devices con­nected directly to the USB bus should not draw more than 500
mA. Should the devices need more power than this, it will be
necessary to provide a powered hub. The data transfer speed is

1.5 Mbit or 12 Mbit, depending on the device connected

.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

53

IEEE 1394 (FIREWIRE®)

IEEE 1394 (optional feature, also known as iLink® or Fire­Wire

®

) ports provide an easy and high-performance way of
connecting high-speed storage, imaging, and many new types
of audio/video devices easily.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

54

S

S

OOFFTTWWAARRE

E

There are many kinds of help and information for using your
PC. This section tells you where to get help with the Microsoft

®

Windows

®

XP operating system, software programs, and the

Medion PC.

GETTING TO KNOW WINDOWS XP

WINDOWS

®

XP MANUAL

This printed manual provides general information about the
operating system. We recommend that all beginning users or
users of previous versions of Windows

®

read this information. It
can be found with the CDs in the accessory box that came with
your PC.

WINDOWS

®

XP TOUR

Windows® XP includes a tour that you can take to familiarize your­self with the operating system. This tour can usually be found by
clicking on the Start menu. You can also find the tour by selecting

All Programs, then Accessories.

MICROSOFT

®

INTERACTIVE TRAINING

Training is the most powerful way to acquire skills that help you
perform a specific task efficiently. On the Start menu, choose

All Programs, choose Accessories, and then choose Micro­soft

®

Interactive Training.

WINDOWS

®

XP HELP AND SUPPORT

An answer to almost every question can be found in this pro­gram. You’ll find it in the Start menu.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

55

SOFTWARE HELP

Many software programs incorporate extensive help functions.
As a general rule, you can access help functions by pressing F1
on the keyboard. Many software programs include Help as an
option on the menu at the top of the screen or window. They
may also provide an icon (or icons) with a question mark on
them that you can click to access more information.

The software included with the Notebook was pre-installed at
the factory.

During software installations, important files can be changed or
even deleted. Medion recommends that you set a Windows

®

XP

recovery point before installing software (p. 66).

For specific installation information, refer to the documentation
that came with the software program. Here is a typical installa­tion procedure.

1. Load the software program installation disc in the combo drive.

2. Most installer programs start automatically after a few
moments.

If the installer program does not start automatically, you can
manually start it by double-clicking My Computer, and then double­clicking the drive letter where you loaded the software program in­stallation disc.

3.

Follow the instructions given by the program.

DEVICE DRIVERS

If you install external devices, such as printers or digital cameras,
you may also need to install device drivers. The drivers will be
included with your peripheral devices. These are occasionally up­dated by the manufacturer. Check with the manufacturer of your
peripheral device to find out if you have the most recent version of
your device drivers.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

56

INFORMATION ABOUT YOUR PC

Clicking on Start and then on Information about your PC will
bring up more extensive information about your PC, as well as
useful links to software tools and other resources. It also con­tains any last minute information about your PC that may not
be included in this manual.

DIGITAL SIGNATURES

When installing software or drivers, you may receive the mes­sage “The software you are installing has not passed Windows
Logo testing to verify its compatibility with Windows XP.” Al­though the software lacks the digital signature, it may work
properly. Click on “Tell me why this testing is important” to get
detailed information. Click on “Continue Anyway” to continue to
install your software.

To set file signature verification options for Windows XP:

1. Click Start, then Control Panel. Double-click System.

2. On the Hardware tab, select Driver Signing.

3. Under File Signature Verification, select one of the
following:

Ignore allows all device drivers and software to be installed on this PC re­gardless of whether they have a digital signature.

Warn displays a warning message when you attempt to install a software
program or device driver without a digital signature.

Block prevents installation programs from installing device drivers without
a digital signature.

If you are logged on to your PC as an administrator, you can
click Apply setting as system default to apply the selected
setting as the default for all users of your PC.

WARNING! During software installation im­portant files can be changed or deleted. To
avoid problems in using older files after instal­lation, make sure to safeguard your hard disk.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

57

WINDOWS ACTIVATION

Microsoft is committed to the protection of intellectual property
rights and the reduction of software piracy. Windows XP con­tains software-based product activation technology. Your copy
of Windows XP has already been activated for your Notebook.
However, product activation is needed if some components of
your Notebook have been replaced or you use non-authorized
BIOS. If necessary, you can activate Windows XP as often as
needed.

You will probably need to activate Windows XP by telephone
even if Internet Activation is available. This is due to the pre­activated SLP version that runs with a special Product-ID. How­ever, activation needs your unique Product ID that can be found
on the Certificate of Authenticity sticker on your Notebook
housing. When you call, please inform the agent that you are
running an OEM (SLP) version of the software.

THE BIOS SET-UP-PROGRAM

In BIOS setup (Basic Configuration) there are a number of con­figurable parameter settings available for your Notebook. For
example, you can change the operating mode of the interfaces,
security features or power management.

WARNING! The Notebook is factory pre-set to
guarantee optimum operation. Only modify the
parameters if necessary and if you are familiar
with the configuration options.

RUNNING THE BIOS SET-UP

You can only run the BIOS configuration program at system
start-up. If the Notebook has already started, power it down
and then up again. Press the F2 function key in order to start
the BIOS-SET-UP.

M

M

AAIINN

C

C

OOMMPPOONNEENNTTS

S

58

NAVIGATING THE BIOS UTILITY

To enter a menu, highlight the item using the cursor up/down
keys; then press Enter.

While in a menu, follow these instructions:

- Press the cursor up/down keys to move between parameters.

- Press the cursor left/right keys to change the value of a pa-

rameter.

- Press Esc while you are in any of the menus to return to the
main menu.

Note: If you are unsure if your parameter settings
are correct, you should load the "Set-up-
Defaults".

F

F

IIRRSSTT

A

A

IID

D

CChhaapptteerr 55

First Aid

Subject Page

FAQ ............................................................ 61

Data and System Security .............................. 63

System Recovery .......................................... 66

Troubleshooting ............................................ 70

Maintenance ................................................. 73

F

F

IIRRSSTT

A

A

IID

D

60

F

F

IIRRSSTT

A

A

IID

D

61

FFAAQ

Q

–

–

F

F

RREEQQUUEENNTTLLYY

A

A

SSKKEEDD

Q

Q

UUEESSTTIIOONNSS

When do I have to activate Windows?

Your software has been pre-activated in the factory.
An activation will only be required, if ...

... several components are replaced by others.

... you installed a new motherboard.

... a different BIOS version has been installed.

... you install the software to another computer.

What is the Windows activation?

Your operating instructions include a chapter about
this subject.

How do I perform a data backup?

Use the program Backup for this.

It is important that you follow the operating instruc­tions of these programs.

Make a backup and another backup of selected data
to an external medium (CD-R, CD-RW, DVD-R, DVD­RW, SD card, etc.), to familiarize yourself with the
technique.

A backup is unsuitable if you are not able to recover
the data, the medium (floppy disk, CD-R, etc.) is
defective or no longer available.

F

F

IIRRSSTT

A

A

IID

D

62

Do I still have to install the enclosed CDs/DVDs?

No, all programs are preinstalled. The disks are only
intended as backup copies.

When is the recovery of the factory setting recom­mended?

This method should be chosen as the last resort.
Read chapter “System recovery” on page 66 con­cerning the possible alternatives.

Why is the boot partition missing when booting from
the support/ application CD?

The first partition is formatted with the file system
NTFS. Compared to FAT32 this file system offers
more security and a more efficient access. However,
NTFS partitions can only be read from operating sys­tems supporting this. This is not the case in the
aforementioned CD.

F

F

IIRRSSTT

A

A

IID

D

63

D

D

AATTAA AANNDD

S

S

YYSSTTEEMM

S

S

EECCUURRIITTY

Y

The programs described below are part of your Windows oper­ating system. You will find additional information on these pro­grams in the Windows Help file.

DATA SECURITY

Back up data regularly on external media such as a CD-R or
CD-RW. Windows offers both a Backup program and a Files
and Settings Transfer Wizard.

Both programs are found in Accessories/System Tools within
the Start menu. You should make a backup disk with all your
passwords and the operating system’s original configuration.

MAINTENANCE PROGRAMS

You can avoid some hardware and software errors with disk
maintenance programs such as Disk Defragmenter and Disk
Cleanup. The program System Information can also be help­ful since it gives you detailed information about your system
configuration. You will find these programs in Accesso-

ries/System Tools.

PASSWORD RESET DISK

To protect individual user accounts from complications resulting
from lost passwords, users should create a password reset disk
and keep it in a safe place. Windows Help describes how to cre­ate a password-reset disk.

F

F

IIRRSSTT

A

A

IID

D

64

WINDOWS

®

UPDATE

Windows Update is the online updating of Windows. Use Win-

dows Update to download elements such as security updates,
important updates, the newest help files, drivers and Internet
products from the Internet.

The website is regularly augmented by new content, so that
you can download the newest updates and error corrections at
any time, to protect the Notebook and guarantee its function­ing.

Windows Update will search through the Notebook and provide
a list of individual updates specially for the configuration of your
Notebook.

Each update that Microsoft regards as important for the opera­tion of the operating system, programs or hardware compo­nents will be classified as an “important update” and automati­cally selected for installation for you.

Important updates will be provided to remove known problems
and to protect the Notebook against known security risks.

Carry out four simple steps, to download the updates needed
and to keep your computer on the current status of technology:

1. Open Windows Update in the Help and Support Cen-

ter.

2. Click on Search for update.

3. Click on Add to select the desired update and to

add it to the updates to be installed, while you are
searching through the available updates in each
category. You can also read a complete description
of each individual element by clicking on the Read
further Link.

4. Click on Check and install updates, when you

have selected all the desired updates, and then
click on Install now.

F

F

IIRRSSTT

A

A

IID

D

65

WINDOWS UPDATE INFORMATION FOR DATA SECURITY

Windows Update needs certain information about the respective
Notebook, so that a suitable list with updates can be provided
for you. This information will include the following:

• Version number of the operating system

• Version number of Internet Explorer

• Version numbers of additional software programs

• Plug & Play identification key of the hardware devices

Windows Update will stand up for the protection of your private
data and will not record your name, address, email address or
other forms of personal data. The information collected will only
be used during the time that you are visiting the website. It will
also not be stored.

 The update can only be executed via the Internet.

Ensure that you are on-line with your Notebook
when downloading the updates.

F

F

IIRRSSTT

A

A

IID

D

66

S

S

YYSSTTEEMM

R

R

EECCOOVVEERRY

Y

Before performing a recovery, you should review the “Trouble­shooting” section in this manual to see if you can resolve the
problem. If not, it is possible that a software file required by
Windows XP to operate the computer was damaged or deleted.
If this is the case, there are basically two strategies for recov­ery.

• Restoring your system using Windows XP System

Restore

This type of recovery is usually very quick and will solve
most typical problems that occur after an unsuccessful
installation of an application, device, or driver has caused
instability in the system.

• Restoring your system using the Application &

Support Disc provided by Medion.

There are several options for recovery available using the
Application & Support Disc, including the ability to restore you
entire system to its original factory settings.

RESTORING MICROSOFT WINDOWS XP

Windows XP System Restore allows you to set "recovery
points." This feature enables you to take a snapshot of the cur­rent system configuration, which you can return to should an
application, device, or driver cause instability in the system.

While Windows XP automatically creates recovery points, you
can also set them manually. In addition, you can configure the
maximum amount of memory used for this.

To use System Restore to set recovery points or restore your
system, click the Start menu, then choose All Programs, then
choose Accessories, then choose System Tools, then choose
System Restore. Select the task that you would like to per­form and follow the on screen instructions. For detailed infor­mation refer to Windows XP Help and Support.

System Restore includes various functions to help ensure that
your Notebook and installed applications and devices work cor-

F

F

IIRRSSTT

A

A

IID

D

67

rectly. These functions assist you in solving the problems which
might occur by adding, deleting or replacing files required for
proper functioning of Windows XP, and your software and de­vices. The restore function you use depends on the type of prob­lem or error.

In general, it is a good idea to set a recovery point before in­stalling a new software program or driver. If the system be­comes unstable during or after the installation, you can usually
return to a workable configuration without deleting newly cre­ated documents. If Windows XP System Restore does not solve
your problem refer to the next section, System Restore.

SYSTEM RESTORE

If your system is not functioning properly and Windows XP Sys­tem Restore did not solve the problem, then you should use the
Application Support Disc provided by Medion to restore your
system. This recovery mode provides several options.

There are three options for restoring your system:

1. Recovery of start-up files
Use this option to restore the start-up files. This option is
most useful when a virus has corrupted certain files
necessary for your computer to boot. It is executed very
quickly.

2. Recovery of system and driver files
This option will copy the original system and driver files to
your hard disk. This feature shouldn’t affect your personal
files and settings. However, we recommend that you first
back up your personal data just to be safe.

3. Restoring the factory settings
This recovery will reset your system to its condition at
delivery. ALL DATA ON YOUR LOCAL DISC (C:) DRIVE WILL
BE ERASED. If possible, back up your personal data to
external media before performing this restore.

F

F

IIRRSSTT

A

A

IID

D

68

LIMITS OF RESTORE FACTORY SETTINGS (RESTORE OPTION

3)

Any changes made to the original factory configuration (for ex­ample, settings for your display, printers, network, or Internet
connection) will be overwritten by this restoration.

Any software that you installed after purchasing the computer
will be erased and will need to be reinstalled.

Everything on the C:\Local Disk partition will be erased. This
includes all of your documents and settings.

Tampering with the Recover (E:) hard disk drive or its contents
will make it more difficult to restore your Notebook. Do not
alter, resize, or delete the Recover (E:) hard disk drive. Also,
do not alter or delete the files on the Recover (E:) hard disk
drive. We strongly recommend that you do not store any files,
folders, or programs on the Recover (E:) hard disk drive.

F

F

IIRRSSTT

A

A

IID

D

69

PERFORMING THE RESTORE

Each step of the restore replaces an increasing number of files on
your hard drive, and therefore takes longer to finish. We recom­mend that you attempt each of the restore options in order, start­ing with “Recovery of start-up files.” After finishing each restore
option, you should test your system to see if it has solved your
problem. If the problem persists, then try the next restore option.

To make selections in the restore program, use the up and down
arrow keys to highlight the option you would like to select, and
then press enter to make the selection.

1. Copy your data files to external media (such as a floppy
disk, CD-R, CD-RW, DVD-RW, or flash card) BEFORE you
continue!

2. Insert the “Application & Support” disc and restart (reboot) the
Notebook.

Caution: Do not use the “Medion Product Recovery” CD­ROM (a Windows XP CD for restoring Windows XP itself) for
restoration purposes. This disc does not restore the original
factory setup of the Notebook.

3. Select the option “Boot from CD-ROM” from the first screen.

4. Use the arrow keys to read through the license agreement,
and then press the Esc key to proceed.

5. Read the information screen that appears, and then press
Enter to proceed.

6. Select option 1, 2, or 3 to perform a restore (the types of
restore are described earlier in this chapter). Select option 4.
Reboot to cancel the restore process.

7. The next screen shows information about the type of restore
that you have chosen. Select either Abort or Back to return
to the previous screen, or select Finish to execute the restore.

8. When the restore is completed, it automatically restarts the
Notebook. Remove and store the Application & Support disc.

F

F

IIRRSSTT

A

A

IID

D

70

T

T

RROOUUBBLLEESSHHOOOOTTIINNGG

LOCALIZE THE CAUSE

Errors can have simple causes, but sometimes they are caused
by faulty equipment. We would like to give you some tips to
help solve common problems. Should these instructions not
lead to success, please feel free to contact us.

CHECK CABLES AND CONNECTIONS

Visibly check all cables and connections. Should all lights be
off, check whether all equipment is supplied with power.

¾ In battery mode, connect the Notebook to the power

adapter and ensure that the battery is charged up.

¾ If you are operating the Notebook with the power adapter,

check the electrical socket, power cord and all switches in
the circuit of the electrical socket.

¾ Switch off the Notebook and check all cable connections.

Check the connections to peripherals. Do not exchange ca­bles, even though they may look similar. The polarity in the
cables may be different. When it is confirmed that the Note­book has power and all connections are correct, turn the
Notebook on again.

THE POWER ON SELF TEST (POST)

The Power On Self Test (POST) is executed during each boot
process to test the memory, motherboard, display, keyboard
and other components. If the Notebook does not pass the POST
but beeps several times, or if the screen remains blank, call
your Notebook support technician.

F

F

IIRRSSTT

A

A

IID

D

71

ERRORS AND POSSIBLE CAUSES

The display is blank:

- Confirm that the system is not in stand-by mode. Press any
key on the keyboard to test this.

Wrong Date and Time:

- Double-click the clock on the taskbar and correct the date
and time.

An error message appears during boot-up:

- You may have a floppy disk in the disk drive so the system
is looking for an operating system on that floppy. Remove
the disk and press any key.

No data can be accessed from the optical Drive:

- Check whether the CD is inserted correctly.

- Is the CD-ROM displayed in Windows Explorer? If so, test

another CD.

The Printer does not work:

- Check the printer cable.

- Do a Printer Self Test.

- Should several pieces of equipment be operating from the

same port, check all peripherals and reinstall the drivers.

- If you have access to the Internet, download and install the
latest drivers from the manufacturer’s Web site.

The mouse does not work.

- Check the cable connection.

F

F

IIRRSSTT

A

A

IID

D

72

ADDITIONAL SUPPORT

If the suggestions in the above section have not solved your prob­lem, please contact customer care and we will attempt to help you
solve the problem. Before you call, however, please have the fol­lowing information available:

- How is your computer configured?

- What additional peripherals do you use?

- What messages, if any, appear on your screen?

- What software were you using when the error occurred?

- What steps have you already undertaken to solve the prob-

lem?

- Have you upgraded or removed drivers or hardware?

- Can you manually repeat the problem?

- If you have been given a customer number previously,

please have this available.

DRIVER SUPPORT

This Notebook has been extensively tested in our laboratories with
a large number of compatible devices. It fulfils all required stan­dards and complies with the standard “Designed for Windows”,
which certifies utmost compatibility. However, the software drivers
for individual components are updated from time to time. This is a
regular process provided by the manufacturer to mend possible
compatibility problems that may occur with components (e.g.,
programs or hardware) that were not tested at the time of your
Notebook’s manufacture. Driver updates and the latest informa­tion on your product are available on the Internet.

 Visit Medion USA, Inc. on the Web at

www.medionusa.com

F

F

IIRRSSTT

A

A

IID

D

73

M

M

AAIINNTTEENNAANNCCEE

MAINTENANCE INSTRUCTIONS

This section provides information on the proper maintenance
and care of your Notebook. Following these measures can ex­tend its lifetime.

CLEANING AND CARE

• Warning! There are no user-serviceable or user-
cleanable parts inside the Notebook housing. Never
open the Notebook housing.

• DO NOT use any solvents, corrosive or gaseous
cleaning agents.

• DO NOT use CD-ROM cleaning disks or similar
products that clean the lens of the laser to clean
your CD-ROM/CD-RW/DVD/DVD-RW drive.

• Before cleaning, always remove the power adapter plug and
all connecting cables.

• Only use a damp, lint-free cloth to clean the Notebook.

CARE OF THE TFT DISPLAY

• Always close the Notebook when not in use. Avoid touching
or scratching the surface of the screen as it is easily dam­aged.

• Make sure that no water drops are allowed to remain on the
screen. Water can cause permanent discoloration.

• Clean the screen with a dry, soft, lint-free cloth.

• Do not expose the screen to bright sunlight or ultraviolet ra-

diation.

F

F

IIRRSSTT

A

A

IID

D

74

TRANSPORTING THE NOTEBOOK

Please use the following guidelines when transporting the Note­book:

• Switch off the Notebook. This will prevent damage to the
hard disk. When the Notebook is turned off, the hard disk
heads are moved into a safe area.

• Remove any CDs and floppy disks. This will prevent damage
to the disks or to the drive heads.

• Close the Notebook and ensure that the display catch se-
cures the cover into a shut and locked position.

• Always use the Notebook carrying case. This helps to protect
the Notebook from dirt, moisture, jolts and scratches.

• Fully charge your battery and any spare batteries immedi-
ately before a long journey.

• Should you need to ship your Notebook, always use the
original packaging and make certain the shipper knows the
contents contain fragile electronic equipment.

• Wait until the Notebook has reached ambient (room) tem-
perature before turning it on or connecting it to the power
adapter. Drastic variations in temperature and humidity can
create condensation within the Notebook and may cause it
to short-circuit.

UPGRADES AND REPAIRS

• Only a qualified Service Engineer should perform upgrades
and repairs to your Notebook.

• If you do not have the necessary qualifications, go to an ap-
propriate Service Engineer. Please contact the Service
Centre if you are experiencing technical problems with your
Notebook.

F

F

IIRRSSTT

A

A

IID

D

75

SECURING YOUR NOTEBOOK

SETTING A USER PASSWORD

You can prevent unauthorized access to your Notebook by set­ting a User Password. When starting the Notebook the pass­word will be requested. The User Password is set in the BIOS.

 Attention: Keep your password in safety place. If

you forget your password you do not have the
possibility to cancel it. In this case please call
your service centre.

To protect your data from unauthorized access, you can also
use the security option of Windows

xp

. See also chapter „Data

and System Security“ (p. 63).

USING A SAFETY LOCK

You can prevent theft by using a so called Kensington-lock,
which can be bought at your local retailer.

The cable wraps around an object and the „T“ shaped end in­serts into the Kensington lock port and a key or combination
dial is used to secure the lock in place. Please keep your key at
a safety place.

F

F

IIRRSSTT

A

A

IID

D

76

NOTES FOR SERVICE ENGINEERS

• Before opening the housing, disconnect the Notebook from all
power sources and remove any connecting cables. If the Notebook
has not been disconnected from the power outlet before being
opened, there is a danger of severe electric shock. There is also a
risk of damage to the components.

• Internal components of the Notebook may be damaged by elec­trostatic discharge (ESD). Perform system upgrades and

changes in an ESD-protected work area. If no such work area is
available, wear an antistatic wrist strap or touch a highly conduc­tive metal object. Your service centre can repair damage sustained
by inappropriate handling for a fee.

• Use only original spare parts.

CAUTION: The CMOS lithium batteries cannot tolerate intense pressure,

high temperatures or fire. Keep away from children! Danger of explosion if
replaced incorrectly. Only replace with a compatible type (CR2032) as rec­ommended by the manufacturer. Lithium-Batteries are hazardous waste
and need to be disposed of properly. If necessary, we will take back your
used CMOS lithium battery.

Notes on Laser Radiation :

Laser devices of Laser Class 1 to Laser Class 3b may be used in the
Notebook. Where the Notebook housing remains closed, the device
meets the requirements of Laser Class 1. By opening the Notebook
housing you will gain access to laser devices of up to Laser Class
3b.

• The CD-ROM/CD-RW/DVD/DVD-RW drive contains no user-
serviceable parts. Only the manufacturer should perform repairs
to the CD-ROM/CD-RW/DVD/DVD-RW drives.

When removing and/or opening laser devices, the following guide­lines must be observed:

• DO NOT look into the laser beam, even while wearing optical pro-
tection.

• DO NOT allow yourself to be exposed to the laser beam. Avoid
exposure of the eyes or skin to direct or stray
radiation.

A

A

PPPPEENNDDIIX

X

77

CChhaapptteerr 66

Appendix

Subject Page

Standards .................................................... 79

Warranty ...................................................... 84

Index .......................................................... 87

A

A

PPPPEENNDDIIX

X

78

A

A

PPPPEENNDDIIX

X

79

S

S

TTAANNDDAARRDDS

S

This Notebook meets the requirements of the following standards:

ELECTROMAGNETIC COMPATIBILITY

This Notebook meets the following requirements for standards
of electromagnetic compatibility and electrical safety:

EN 55022

Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurement.

EN 55024

Information technology equipment - Immunity characteris­tics - Limits and methods of measurement.

EN 61000-3-2

Limits - Limits for harmonic current emissions (equipment
input current up to and including 16 A per phase).

EN 61000-3-3

Limits - Limitation of voltage fluctuations and flicker in low­voltage supply systems for equipment with a rated current
up to 16 A.

• Keep the Notebook at least one meter (approximately three
feet) away from high frequency and magnetic interference
sources (e.g., televisions, loudspeaker cabinets, mobile tele­phones, etc.) in order to avoid malfunctions and/or loss of
data.

• Please note that only shielded cables shorter than
3 meters (9.84 ft) should be used for the LPT, COM, USB,
IEEE 1394, audio, video and network interfaces with this
Notebook.

• When connecting additional components, please observe the
Guidelines on Electromagnetic Compatibility (EMC).

• This class B digital apparatus complies with Canadian ICES-

003. Cet appareil numérique de la classe B est conforme á la
norme NMB-003 du Canada.

A

A

PPPPEENNDDIIX

X

80

ELECTRICAL SAFETY

EN 60950

Safety of information technology equipment.

• The connection of devices is limited to equipment that complies
with EN60950 “Safety of information technology equipment”
or EN60065 “Audio, video and similar electronic apparatus.
Safety requirements”

• For U.S. / Canadian purposes: The Notebook should only be

connected to equipment which complies with UL 60950 /
CAN CSA 22.2 No 60950

ERGONOMICS

EN 29241-3

Ergonomic requirements for office work with visual dis­play terminals (VDTs). Visual display requirements.

EN ISO 9241-8

Ergonomic requirements for office work with visual dis­play terminals (VDTs). Requirements for displayed col­ors.

NOISE EMISSION

ISO 7779 (ISO 9296): Acoustics. Measurement of airborne
noise emitted by information technology and telecommunica­tions equipment.

This PC fulfills the requirements of noise emissions according to
ISO 7779 with following values.

Operating Mode Max. Sound power level

LWAd (dB/A) (declared
according to ISO 9296)

Idling 4.8

Operating 5.2

Max. Sound pressure level

LpAm (dB/A) (declared
according to ISO 9296)

At bystander position Idling 40

St bystander position Operating 47

A

A

PPPPEENNDDIIX

X

81

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable protec­tion against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio fre­quency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio com­munications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.

• Consult the dealer or an experienced technician for
help.

Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. Shielded interface cables, if any, must
be used in order to comply with the emission limits.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance.

This transmitter must not be co-located or operating in con­junction with any other antenna or transmitter.

A

A

PPPPEENNDDIIX

X

82

"Uniwill declare that 255xIy (with wireless card: Intel
WM3B2200BG) is limited in CH1~CH11 by specified firmware
controlled in USA."

MACROVISION STATEMENT

This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other in­tellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

DECLARATION OF CONFORMITY

According to 47CFR, Parts 2 and 15 for Class B Personal Com­puters:

We: Medion USA, Inc.

Located at: 1001 Bayhill Dr. Ste. 155, San

Bruno, CA 94066

Fax : [phone] (for conformity is-

sues only)

Declare under sole responsibility that the product identified
herein complies with 47CFR Parts 2 and 15 of the FCC rules as
a Class B digital device. Each product marketed is identical to
the representative unit tested and found to be compliant with
the standards. Sampling records continue to indicate that the
equipment being produced can be expected to lie within the
acceptable variation, due to quantity production and testing on
a statistical basis as required by 47CFR §2.909. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept
any interference received, including interference that may
cause undesired operation. The above named party is responsi-

A

A

PPPPEENNDDIIX

X

83

ble for ensuring that the equipment complies with the standards
of 47CFR §§15.101 to 15.109.

Canadian Notice

This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
radio interference regulations of the Canadian Department of
Communications.

Le present appareil numerique nemet pas de bruits
radioelectriques depassant les limites applicables aux appareils
numeriques de Classe B prescrites dans le reglement sur le
brouillage radioelectrique edicte par le Ministere des
Communications du Canada.

Trade Name: Medion

Type or Model Number: MD95393 – UIM2010

Party Responsible: MEDION USA, Inc.

Executed on 21

st

of April 2005, at San Bruno

Copyrights

Microsoft, Windows, Windows Media, and the Windows logo are
registered trademarks of Microsoft Corporation in the United
States and/or other countries. Other company, product, and
service names may be trademarks or service marks of others.

A

A

PPPPEENNDDIIX

X

84

W

W

AARRRRAANNTTY

Y

MEDION warrants to our customers that this product is free from defects in
materials and workmanship as follows: for a period of one (1) year from the
date of original purchase, defective parts or a defective product returned to a
MEDION repair facility or a MEDION Authorized Service Center ("ASC") for such
product, as applicable, and proven to be defective upon inspection, will be ex­changed for new or comparable rebuilt parts, or a refurbished product, as de­termined by the MEDION repair facility or the ASC.

Limited warranty repair or replacement shall not extend the original limited
warranty period of the defective product. This limited warranty does not cover
any supplies or accessories, including but not limited to: software, blank media,
user-installed drives, etc.

EXCLUSIONS: this limited warranty does not apply, and you will have no rem­edy hereunder with respect to (a) products that have been modified, opened,
repaired or otherwise altered, except by MEDION or an ASC, (b) products that
have been damaged or destroyed after delivery to the customer, (c) any third
party software, interfaces, parts, supplies, peripherals or other products or any
defects resulting from use of the product in connection with such third party
products, (d) defects resulting from improper or inadequate maintenance, cali­bration or site preparation, (e) defects resulting from any misuse, abuse, acci­dent, neglect, negligence or any use other than in accordance with the handling
or operating instructions provided by MEDION, (f) defects resulting from expo­sure to unusual physical or electrical stress or from any operation other than in
accordance with the published environmental specifications for the product.

TO THE EXTENT ALLOWED UNDER APPLICABLE LAW, THE ABOVE WARRANTIES
ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, WHETHER
WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND MEDION SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND NO
IMPLIED WARRANTY APPLIES TO THE PRODUCT AFTER THE APPLICABLE
PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE. Some coun­tries, states or provinces do not allow exclusions or limitations on the duration
of an implied warranty, so the above limitation or exclusion might not apply to
you. This limited warranty gives you specific legal rights and you might also
have other rights that vary from country to country, state to state, or province
to province.

MEDION´s limited warranty is valid in any country or locality where MEDION
has a support presence for this product and where MEDION has marketed this
product. The level of warranty service you receive may vary according to local
standards. MEDION will not alter form, fit or function of the product to make it
operate in a country for which it was never intended to function.

A

A

PPPPEENNDDIIX

X

85

TO THE EXTENT ALLOWED UNDER APPLICABLE LAW, THE REMEDIES IN THIS
LIMITED WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES.
EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL MEDION OR ITS SUPPLIERS
BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL, INCIDENTAL,
CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE,
WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. IN NO EVENT SHALL
RECOVERY OF ANY KIND AGAINST MEDION BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY MEDION WHICH CAUSED THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL
RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF MEDION. Some countries, states or provinces do not allow
the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.

THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT AS
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE
OF THIS PRODUCT TO YOU.

Please note the following:
Be sure to keep your purchase receipt in a safe place. MEDION, at its option,
may require a copy of the receipt to validate the warranty period effective date
(i.e. date of purchase). Warranty liability only applies to material or factory
faults. It does not apply to damage due to breakage, for example, a crack in
the housing. Our service includes unit exchange or send-in repair:

Unit Exchange
In locations where Unit Exchange is available, MEDION will send you a replace­ment PC. You must return the defective PC to MEDION (using the shipping
carton that the new one came in.)

Send-In Repairs
In locations where Send-In Repair Service is available, repair service can be
obtained by shipping your PC to the MEDION Repair Center. The PC will be
repaired and returned to you.

Replacement products may be either new or equivalent in performance to new.
MEDION replacement or repaired products may contain remanufactured parts
equivalent to new in performance or may have been subject to incidental use.

For either Unit Exchange or Send-In Repairs, you must have an authorized RMA
number from Medion support before shipping your defective product.

Out-of-Warranty Support
In addition to providing free technical support during the warranty period,
MEDION is also available to support your product after the warranty period has
ended. This out-of-warranty support will be provided on a fee basis.

A

A

PPPPEENNDDIIX

X

86

Networking
Medion warrants the operation of network capabilities as follows: Medion will
ensure that the network (LAN) port is working properly. No network connec­tivity issues are supported.

Making Copies of This Manual

This manual contains information protected by law. All rights are reserved.
Copyright law prohibits duplicating this information in mechanical, electronic, or
any other form, without the written approval by the manufacturer.

A

A

PPPPEENNDDIIX

X

87

I

I

NNDDEEX

X

A

All programs...................... 21

Ambient temperature............7

Appendix .......................... 77

Audience..............................i

B

Battery operation ..........10, 25

Battery Power............................... 26

Charging the Battery .................... 26

Checking the battery level............ 27

Inserting the battery...................... 25

Battery Power.................... 26

BIOS Setup-Program .......... 57

Burning CDs ....See writing CDs

C

Cabling ...............................9

Care of displays ................. 73

CD-ROM............................ 39

CD-RW Drive ..................... 39

CDs

Data.............................................. 42

Music............................................ 42

Writing ......................................... 42

Charging the Battery .......... 26

Checking the battery level ... 27

Cleaning agents ................. 73

Cleaning and Care .............. 73

Click................................. 32

Clone desktop.................... 30

Connection options ............. 52

Connectors

External monitor .......................... 29

Modem ......................................... 45

PC card......................................... 50

USB.............................................. 52

Control panel .....................22

Copyright

©

..........................ii

D

Data and system security ....63

Data entry.........................32

Data security ................. 3, 63

Deleting files......................38

Desktop ............................21

Digital Signatures ...............56

Directories.........................38

Disc-Drive .........................39

Discs

Handling....................................... 39

Loading ........................................ 40

Playing DVD movies ................... 42

Playing music CDs....................... 42

Removing..................................... 41

Writing ......................................... 42

Display..............................29

Opening and closing the display .. 29

Double-click.......................32

Drag and drop....................32

Driver support....................72

Drivers........................ 38, 55

DVD movies.......................42

DVD-Drive .........................39

E

Electrical safety..................80

Electromagnetic compatibility

....................................79

EMC..................................79

A

A

PPPPEENNDDIIX

X

88

Emergency Ejection of a

blocked Disc ................... 41

Enter personal details ......... 20

Ergonomics ....................... 80

Extend desktop.................. 30

External monitor ...........14, 29

Clone desktop ...............................30

Extend desktop..............................30

F

Factory settings

Recovery.......................................67

FAQ ................................. 61

Fast Ethernet-Network ........ 46

FCC Compliance Statement.. 81
Files

Deleting.........................................38

Finding files....................... 37

First Aid............................ 59

Frequently asked questions . 61

G

Getting Started .................. 19

H

Handling ........................... 17

Hard drive......................... 37

Partitions.......................................37

HD .................. See Hard drive

help ................................. 54

Help with software ............. 55

I

Icons................................ 22

IEEE 1394 ....................15, 53

Indicators

Capital Lock..................................16

Hard disk drive access .................. 16

Num Lock..................................... 16

Scroll Lock ...................................16

Information about your PC ...22

Inserting the battery...........25

Installing a PC card.............51

K

Kensington-lock .................75

Keyboard ..........................32

L

Laser radiation ................... 76

License agreement..............20

M

Main components ...............35

Main Operation...................24

Maintenance ...................... 73

Care of the TFT display................73

Cleaning and Care.........................73

Transporting the notebook ............74

Maintenance programs ........63

Mikrofonindgang.................44

Model Number....................83

Modem ......................... 9, 45

Mouse...............................33

MPEG2 ..............................42

MusicMatch Jukebox............42

N

Network ............................46

Fast Ethernet-Network..................46

Troubleshooting............................48

A

A

PPPPEENNDDIIX

X

89

What do you need for networking?

................................................. 47

What is a Network?...................... 46

Wireless LAN............................... 49

O

On/Off button .................... 23

Operational safety ................3

P

Partitions .......................... 37

Password reset disk ............ 63

PC card

Installing....................................... 51

Removing ..................................... 51

PC card slot....................... 50

Peripheral devices ............... 55

Playing DVD movies............ 42

Playing music CDs .............. 42

Point ................................ 32

POST................................ 70

Power............................... 28

Turning off your computer........... 22

Power adapter .....................8

Power management............ 28

Power On Self Test ............. 70

Power supply ..................... 23

Battery operation.......................... 25

Suspend mode .............................. 28

Power Supply

Main Operation ............................ 24

PowerDVD......................... 42

Program bar ...................... 21

Programs

Installing....................................... 67

Location ....................................... 38

Q

Quality................................ii

R

Recovery ...........................66

Factory settings ............................ 67

Windows

xp

.................................... 66

recovery points ..................66

Removing a PC card............51

Repairs .............................74

Restoring ..........................66

Limits............................................ 68

Running the Bios Setup .......57

S

Safety

Data.............................................. 38

Safety and maintenance ....... 1

Safety instructions............... 3

Additional safety instructions......... 5

Ambient temperature...................... 7

Battery operation.......................... 10

Cabling........................................... 9

Data security .................................. 3

General safety information............. 4

Modem ........................................... 9

Operational safety .......................... 3

Optical drive safety ........................ 6

Power adapter................................. 8

Set-Up location .............................. 7

TFT Display safety......................... 6

Touch pad....................................... 9

Upgrades and repairs.................... 74

Screen resolution................29

Scroll ................................32

Search ..............................37

Securing your Notebook ......75

Serial Number......................ii

Service ...............................ii

A

A

PPPPEENNDDIIX

X

90

Service engineers............... 76

Setting a User Password...... 75

Set-Up Location ................... 7

Software........................... 54

for playing CDs.............................42

Software help .................... 55

Sound card........................ 44

Standards ......................... 79

Electrical safety.............................80

Electromagnetic compatibility ......79

Ergonomics ...................................80

FCC Compliance Statement..........81

Standby mode ................... 28

Start button ...................... 21

Support ............................ 72

Suspend to disk ................. 28

T

Task bar ........................... 22

Touch pad..................... 9, 33

trademarks ......................... ii

Transport.......................... 74

Troubleshooting ................. 70

Errors and possible causes ............71

Turn off computer .............. 22

U

Universal Serial Bus............ 52

Upgrades and repairs.......... 74

Use of PC cards.................. 50

Using a safety lock ............. 75

V

Views

Battery charge indicator................13

Device indicators ..........................13

IEEE 1394.....................................15

Infrared Port..................................14

Keyboard ......................................13

LAN Port (RJ-45) .........................15

Line out......................................... 14

Microphone................................... 13

Microphone in...............................14

Modem Port (RJ-11) .....................15

Monitor (external).........................14

Open notebook..............................14

PC card slot PCMCIA...................15

Power ON/OFF.............................13

Stereo speaker...............................13

TFT Display..................................13

Touchpad ...................................... 13

USB port .......................................15

Views of the notebook.........11

Voyants

Wireless LAN ...............................16

W

Warranty...........................84

Windows activation .............57

Windows Logo testing .........56

Windows Media Player.........42

Windows XP

Control Panel ................................22

Desktop.........................................21

help ...............................................54

Help ..............................................22

Help and support...........................54

Interactive training........................ 54

Manual..........................................54

Recovery point...............................55

Tour ..............................................54

Windows

xp

Recovery.......................................66

Wireless LAN......................49

Writing CDs ....................... 42