How it Works
Medion
Loading...
A
B
Loading...
Loading...
AKOYA S42 Series
Instruction Manual
74 pgs2.92 Mb0

Medion AKOYA S42 Series, AKOYA S46 Series Instruction Manual

Download
Page 1
Instruction Manual
35.6 cm / 14“ Notebook
MEDION® AKOYA
®
S42xx S46xx
Page 2
Table of Contents
1. About these Instructions .................................................................................. 5
1.1. Symbols and Key words used in these Instructions ............................................... 5
1.2. Proper Use ............................................................................................................................. 6
1.3. Declaration of Conformity ...............................................................................................6
2. Safety Instructions ............................................................................................ 7
2.1. Dangers for children and people with reduced ability to operate
machinery. ......................................................................................................................................7
2.2. Operational Safety .............................................................................................................. 7
2.3. Never Carry Out Repairs Yourself ................................................................................. 8
2.4. Data Backup .......................................................................................................................... 9
2.5. Setup Location ..................................................................................................................... 9
2.6. Environmental Requirements ........................................................................................ 9
2.7. Ergonomics .........................................................................................................................10
2.8. Connecting ..........................................................................................................................11
2.9. Cabling ..................................................................................................................................11
2.10. Information about the Touchpad ................................................................................12
2.11. Battery Mode ......................................................................................................................12
3. Included with your Notebook ........................................................................ 13
4. Views ................................................................................................................ 14
4.1. Open Notebook .................................................................................................................14
4.2. Front View ............................................................................................................................15
4.3. Left Side ................................................................................................................................15
4.4. Right Side .............................................................................................................................16
4.5. Operating and Status LEDs ............................................................................................17
5. First Use ........................................................................................................... 18
6. Power Supply ................................................................................................... 19
6.1. On/Off Switch .....................................................................................................................19
6.2. Mains Power........................................................................................................................19
6.3. Battery Mode ......................................................................................................................21
6.4. Power Management (Power Options) .......................................................................24
7. Display ............................................................................................................. 24
7.1. Opening and Closing the Display ...............................................................................24
7.2. Screen Resolution .............................................................................................................24
7.3. Appearance and Customisation ..................................................................................25
7.4. Connecting an External Monitor .................................................................................26
8. Data Input ........................................................................................................ 27
8.1. The Keyboard .....................................................................................................................27
9. The Touchpad .................................................................................................. 29
Page 3
10. The Hard Drive ................................................................................................. 31
10.1. Important Directories ......................................................................................................32
10.2. mSATA Hard Drive (optional) ........................................................................................33
11. The Optical Drive ............................................................................................. 34
11.1. Inserting a disc ...................................................................................................................34
11.2. Playing/Reading Discs .....................................................................................................35
11.3. Regional playback information for DVDs .................................................................35
11.4. Issues Relevant to the Burner .......................................................................................36
12. The Sound System ........................................................................................... 37
12.1. External Audio Connections .........................................................................................37
13. Network Operation ......................................................................................... 38
13.1. What is a Network? ..........................................................................................................38
13.2. Wireless LAN (Wireless Network) ................................................................................38
14. Bluetooth (optional) ....................................................................................... 40
14.1. Flight Mode .........................................................................................................................40
15. The Multi-Card Reader .................................................................................... 41
15.1. Inserting a Memory Card ...............................................................................................41
15.2. Removing Memory Cards ..............................................................................................41
16. The Webcam .................................................................................................... 42
17. The Universal Serial Bus Port ........................................................................ 42
17.1. Charging function for Compatible Mobile Phones (optional) ..........................43
18. Securing your Notebook ................................................................................ 44
18.1. Power-on Password ..........................................................................................................44
18.2. Kensington Security Lock ..............................................................................................44
19. Software ........................................................................................................... 45
19.1. Getting to know Windows® 8 ........................................................................................45
19.2. Windows Activation .........................................................................................................45
19.3. Windows® 8 – What’s New .............................................................................................46
19.4. Overview ..............................................................................................................................48
19.5. Logging in to Windows ...................................................................................................49
19.6. Linking a User Account to a LiveID .............................................................................50
19.7. Windows® 8 Start Screen ................................................................................................51
19.8. Windows® 8 Desktop .......................................................................................................52
19.9. Using the Search Function ............................................................................................55
20. Control Panel ................................................................................................... 55
20.1. Windows® 8 Power On/Off Functions ........................................................................57
20.2. Control Panel Settings .....................................................................................................58
20.3. Resetting the Notebook to its Factory Settings .....................................................59
20.4. BIOS Setup Program ........................................................................................................60
20.5. Kaspersky Internet Security ..........................................................................................61
Page 4
20.6. Windows® 8 – Help and Support .................................................................................62
21. FAQ – Frequently Asked Questions ................................................................ 63
22. Customer Service ............................................................................................ 64
22.1. What To Do In Case of Hardware Problems ............................................................64
22.2. Find The Cause ..................................................................................................................64
22.3. Do You Need More Help? ...............................................................................................66
22.4. Driver Suppor t ...................................................................................................................66
22.5. Transport ..............................................................................................................................67
22.6. Maintenance .......................................................................................................................68
22.7. Care of the Display............................................................................................................68
23. Upgrading/Modifying and Repair ................................................................. 69
23.1. Notes for Service Technicians .......................................................................................69
23.2. Information on Laser Radiation ...................................................................................69
24. Recycling and Disposal ................................................................................... 70
25. European EN 9241-307 Class II Standard ...................................................... 71
25.1. FCC Compliance Statement ..........................................................................................73
Page 5
Personal Information
Please append the following to your proof of ownership:
Serial number ................................................
Date of purchase ................................................
Place of purchase ................................................
You will find the serial number on the underside of the Notebook. Where applica­ble, also copy the number on your warranty documents.
Our Target Group
This operating manual is intended to be read by both first-time and experienced us­ers. Regardless of any possible professional use, this Notebook is designed for use in a private household. The entire family will be able to enjoy the wide variety of appli­cations it offers.
The Quality
We select our components with a close eye to functionality, ease of use, safety and reliability. Thanks to our ideally balanced hardware/software concept we are able to offer you a state-of-the-art Notebook that you will enjoy whether you are working or at play. Thank you for purchasing our products. We are delighted to welcome you as our new customer.
Copying this Manual
This document contains legally protected information. All rights reserved. Mechani­cal, electronic and any other form of reproduction is prohibited without the written permission of the manufacturer.
Copyright © 2012 All rights reserved. This manual is protected by copyright. MEDION® is the owner of
the copyright. Trademarks: MS-DOS® and Windows®8 are registered trademarks of the Microsoft®
corporation. Intel, the Intel Logo, Intel Inside, Intel Core, Notebook, and Core Inside are trademarks of Intel Corporation in the U.S. and/or other countries.
®
, the HDMI logo and the name High-Definition Multimedia Interface
are registered trademarks of HDMI Licensing LLC. Other trademarks are the property of their respective owners. Subject to technical and optical changes as well as printing errors.
Page 6
1. About these Instructions
Before using the device for the first time, please read these operating in­structions carefully, paying special attention to the safety notices.
This device should only be used as designated and as described in these instructions.
Please keep these instructions in a safe place for future reference. Al­ways include these instructions if passing the device on.
1.1. Symbols and Key words used in these Instructions
DANGER! Warning: immediate mortal danger!
Warning! Warning: possible mortal danger and/or serious irreversible in-
juries!
CAUTION!
Please follow the guidelines to avoid injuries and/or property damage.
ATTENTION!
Please follow the guidelines to avoid property damage.
PLEASE NOTE!
Additional information on using the device
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING! Warning: danger of electric shock!
• Bullet point/information on operating steps and results
Tasks to be performed
Page 7
1.2. Proper Use
This device is designed for the use, management and editing of electronic docu­ments and multimedia content, as well as for digital communication. The device is intended for private use only and not for industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
• Use only spare parts and accessories which we have supplied or approved.
• Follow all the instructions in these operating instructions, especially the safety
information. Any other use is deemed improper and can cause personal injury or damage to the product.
• Do not use the device in extreme environmental conditions.
1.3. Declaration of Conformity
This device is supplied with the following wireless features:
• Wireless LAN (optional)
• Bluetooth (optional)
Medion AG hereby declares that this device conforms to the fundamental require­ments and the remaining relevant regulations of the 1999/5/EC R&TTE Directive.
This product satisfies the basic requirements and relevant regulations of the Ecode­sign Directive 2009/125/EC.
Full declarations of conformity are available at http://www.medion.com/conform­ity.
Page 8
2. Safety Instructions
2.1. Dangers for children and people with reduced ability to operate machinery
• This device is not intended for use by people (including children) with reduced
physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed in its use.
• Children should be supervised to ensure that they do not play with the device.
Children should not be allowed to use this device without supervision.
• Keep the device and its accessories out of the reach of children.
DANGER! Keep plastic packaging out of the reach of children. There is a risk of
suffocation.
2.2. Operational Safety
Please read this section carefully and follow all instructions given. The instructions will help you to operate the Notebook reliably and increase its service life.
• Never open the housing of the Notebook, battery or mains adapter! This could
result in an electric shock or even ignite a fire which will damage your Note­book.
• Optical drive (CD/CDRW/DVD) constitute class 1 laser equipment providing
these devices are contained in a sealed Notebook housing. Do not remove the drive cover as invisible laser radiation may escape.
• Do not insert anything into the Notebook through the slots and openings. This
could result in an electric shock or even ignite a fire which will damage your Notebook.
• The slots and openings on the Notebook are for ventilation purposes. Do not
cover these openings as this could cause the device to overheat.
• The Notebook is not intended for use by companies in the heavy industry sec-
tor.
• To avoid damage from lightning strikes, do not operate the Notebook during
thunderstorms.
Page 9
• Do not place any objects on top of the Notebook and do not exert pressure on
the display. Otherwise, there is a risk that the display may break.
• If the screen breaks, there is a danger of injury. If this happens, pick up the shat-
tered pieces wearing protective gloves and send them to your service centre for professional disposal. Finally, wash your hands with soap, as the pieces may have been contaminated with chemicals.
• Do not fold the display back by an angle of more than 120°. Exceeding this val-
ue may damage the housing or the Notebook. Always hold the display firmly by the middle when folding it back, adjusting the position and closing it. Failure to do so may damage the display. Never use force to open the display.
• To avoid damaging the screen, do not touch it with fingers or sharp objects.
• Never lift the Notebook up by the display as this could break the hinges.
• Switch the Notebook off immediately/do not switch the Notebook on, discon-
nect the mains plug and contact customer services if ...
− the mains adapter or the attached power cable or plug is burnt or damaged.
Replace faulty mains cables/mains adaptors only with original parts. These parts should not be repaired under any circumstances.
− the Notebook housing is damaged or liquid has penetrated into the device.
Have the Notebook inspected by customer services. Otherwise, it may not be possible to operate the Notebook safely. There may be a risk of electric shock and/or harmful laser radiation!
2.3. Never Carry Out Repairs Yourself
WARNING! Never try to open or repair the device yourself. There is a risk of elec-
tric shock.
• If there is a fault, contact the Medion Service Center or other suitable specialist
workshop.
Page 10
2.4. Data Backup
ATTENTION!
Back up your data on external storage media before each update. We do not accept any liability for claims for compensation arising from loss of data or any consequential loss or damage.
2.5. Setup Location
• Keep your Notebook and all connected devices away from moisture and avoid
dust, heat and direct sunlight. Non-compliance with these instructions can lead to faults or damage to the Notebook.
• Do not use the Notebook outdoors because external elements, such as rain,
snow, etc., could damage it.
• Set up and operate all components on a stable, level and vibration-free surface
to prevent the Notebook from falling down.
• Do not operate the Notebook or power adaptor for long periods on your lap or
any other body part as the heat dissipation on the underside can result in un­comfortable overheating.
• In the first few hours of use new devices can give off a typical, unavoidable but
totally harmless smell, which wears off with time. Ventilate the room regularly to prevent odour build-up.
2.6. Environmental Requirements
• The Notebook is most reliably operated at an ambient temperature between
• 5° C (+41° F) and 30° C (+86° F) and at a relative humidity between 20% and
80% (without condensation).
• When powered off, the Notebook can be stored at temperatures between
• 0° C and 60° C (+32° F and 140° F).
• During a thunderstorm, disconnect the mains plug and the antenna plug. For
extra safety, we recommend using an overvoltage protection device to prevent the Notebook from sustaining damage as a result of power surges or lightning strikes.
• After transporting the Notebook, wait until the device has reached room tem-
perature before switching it on. Large changes in temperature or fluctuations in humidity can cause moisture build-up within the Notebook due to condensa­tion. This can cause an electrical short circuit.
• Keep the original packaging in the event the device needs to be sent in the post.
Page 11
10 of 73
2.7. Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes.
The Notebook should never be placed next to a window because this is the bright­est part of the room in daylight. This brightness can make it more difficult for the eyes to adjust to the darker display. The Notebook should always be positioned so that the direction of vision is parallel to the window front.
Setting up the Notebook with your back to the window is incorrect as reflections from the bright window on the screen will then be unavoidable. A position looking onto the window is also incorrect as the contrast between the dark screen and the bright daylight can cause problems for the eyes to adjust and result in problems.
The parallel line of vision should also be maintained in relation to artificial lighting equipment.
In other words, the same criteria and principles apply where the workspace is illu­minated with artificial light. Where space restrictions make it impossible to set up the screen as described, then correct positioning (rotating, tilting) of the Notebook/ screen can prevent dazzling, reflections and excessive bright-dark contrast, etc. In many cases, an improvement can also be achieved by using slats or vertical blinds on the windows, partition walls or by changing the artificial lighting equipment.
Page 12
11 of 73
2.8. Connecting
Follow the instructions below to connect your Notebook correctly and safely:
2.8.1. Power Supply
DANGER! Do not open the housing of the mains adapter. There is a risk of elec-
tric shock when the housing is open. It does not contain any parts re­quiring maintenance.
The socket outlet must be close to the Notebook and easily accessible.
• To disconnect the power supply from your Notebook (via the mains adaptor),
pull the mains plug from the power outlet.
• Plug the Notebook’s mains adapter into AC 100–240 V~, 50/60 Hz earthed sock-
ets only. If you are not sure about the power supply at the set-up location, please ask your power supplier.
• Use only the mains adapter and power cable supplied.
• For extra safety, we recommend using an overvoltage protection device to pre-
vent your Notebook from sustaining damage as a result of power surges or lightning strikes.
• If you want to disconnect the adapter from the mains, pull the connector out
of the wall socket first and then out of the socket on the Notebook. The mains adapter or the Notebook may be damaged if this process is carried out in the re­verse order. Always take hold of the plug when disconnecting the cable from the socket. Never pull on the cable.
2.9. Cabling
• Position the cables so that they cannot be stepped on or tripped over.
• To avoid damaging the cables, do not place any objects on them.
• Do not connect peripheral devices – such as keyboards, mouse and monitor, etc.
– when the Notebook is switched on to avoid damage to the Notebook or the devices. Some devices may also be connected while the computer is running. This is generally the case for devices with a USB connection. In all cases, observe the relevant operating instructions.
• Maintain a distance of at least one metre from sources of high-frequency and
magnetic interference (TV sets, loudspeakers, mobile phones, DECT telephones, etc.) in order to avoid malfunctions and data loss.
• Please note that only shielded cables that are shorter than 3 metres may be
connected to the external interfaces of this Notebook. Please only use double­shielded cables for printer cable connections.
• Do not exchange the supplied cable for another one. Use only the supplied ca-
ble as this cable has been extensively tested in our laboratory.
Page 13
12 of 73
• In addition, when connecting your peripherals only use the connecting cables
supplied with those devices.
• Ensure that all connection cables are connected to their corresponding periph-
eral device to avoid any interference radiation. Disconnect any cables that are not required.
• The only devices which may be connected to the Notebook are those that meet
the requirements set out in the EN60950 standard “Information Technology Equipment – Safety” or devices that meet the EN60065 standard “Audio, video and similar electronic apparatus – Safety requirements”.
2.10. Information about the Touchpad
• The touchpad is operated with the thumb or another finger and reacts to the
energy given out by the skin. Do not use pens or other objects as these can damage your touchpad.
2.11. Battery Mode
To extend your battery’s performance and lifespan and ensure safe operation, you should observe the guidelines below:
• Never expose the battery to direct sunlight or heat for extended periods.
• Do not throw batteries into a fire.
• Failure to comply with these guidelines can result in damage and possibly even
the battery exploding.
• Never open the battery; it does not contain any serviceable parts.
• Avoid dirt and contact with electrically conductive materials or chemical sub-
stances and cleaning agents.
• Use only the supplied mains adaptor to charge the battery.
• Make sure (via the Notebook display or acoustic signal) that the battery is fully
discharged before charging it again.
• Please note: There is a risk of explosion if batteries are incorrectly replaced.
Only replace the battery with the same battery type or an equivalent type rec­ommended by the manufacturer.
• Always charge the battery until the battery charging light goes out. Please also
observe the information in “Charging the battery” on page 31 to assess the charge status of your battery.
• Ensure the Notebook is switched off before replacing the battery.
• Batteries are special waste. Dispose of old batteries properly Your customer ser-
vice agent is the correct point of contact for this.
Page 14
13 of 73
3. Included with your Notebook
Please check that the contents are complete and notify us within 7 days of purchase if any of the following components are missing:
• Notebook
• Li-Ion Battery
• AC Adapter with Power Cord
• OEM version of operating system
• Instruction Manual
DANGER! Keep packaging material such as plastic film away from children.
There is a risk of suffocation if used improperly.
Page 15
14 of 73
4. Views
4.1. Open Notebook
1 2
4
5
6
8
9
7
3
1) Webcam
2) Webcam LED
3) Microphone
4) Display
5) Stereo Speaker
6) Keyboard
7) Touchpad
8) Device Indicators
9) Power ON/OFF
Page 16
15 of 73
4.2. Front View
10
10) Multimedia Card Reader
4.3. Left Side
11 12
13
14
15
11) Kensington® Lock
12) LAN Port (RJ-45)
13) External monitor port VGA
14) HDMI Connector
15) USB 3.0 Port with charging function for mobile phones (optional)
ATTENTION!
The charging function („Symbols and Key words used in these Instructions“ is available in sleep mode and when the Notebook is switched off providing it is activated beforehand in the BIOS.
ATTENTION!
Please use the supplied mains adapter only with this device.
Page 17
16 of 73
4.4. Right Side
16
17
18 19 20
16) Audio Out* / Digital Audio Out (S/P-DIF, optical)
17) Microphone*
18) USB 2.0 Port
19) Optical Drive
20) Power Socket
*Ports with dual function. Configuration is set with the included software
Page 18
17 of 73
4.5. Operating and Status LEDs
The system displays power supply status and operating modes via LEDs. The oper­ating lights also light up during Notebook activity.
1) Battery LED
This LED lights when the battery is charging.
2) Access Indicator
This LED lights or flashes when the Notebook is accessing the hard disk or the optical drive.
3) WLAN / Bluetooth LED
This LED lights when the WLAN /Bluetooth function is activated. The following combinations are possible:
Bluetooth on / WLAN on Bluetooth off / WLAN on Bluetooth on / WLAN off
LED lights
Bluetooth off / WLAN off LED off
4) Capital Lock
This LED lights when CAPS-Lock has been activated. This sets the keyboard to capital letters.
Page 19
18 of 73
5. First Use
To operate your Notebook safety and ensure a long service life, you should read the “Operational safety” chapter at the beginning of this manual. All operating software is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
Before starting, insert the battery by placing it into the compartment until it
clicks into place. Be sure to fasten the battery compartment to prevent the battery falling out.
Connect the supplied mains adapter to the Notebook (11). Next, connect the
power cable to the adapter and then plug it into a mains socket. Move the switch on the mains adapter (optional) to position I to power the Notebook and charge the battery. Set this switch to 0 to stop the power supply.
Open up the display to the desired position using your thumb and forefinger.
The display should not be folded back by more than 120°. Always hold the dis­play firmly by the middle when folding it back, adjusting the position and clos­ing it. Failure to do so may damage the display. Never use force to open the dis­play.
PLEASE NOTE!
When first operating your Notebook please ensure that the battery is insert­ed and the mains adapter is connected. This is required for Windows® 8 to correctly work out the Windows® 8 performance index.
Switch the Notebook on by pressing the on/off switch (9). The Notebook will
now start and run through various steps.
PLEASE NOTE!
There should be no bootable disk (e.g. the recovery disc) in the optical drive as this will prevent the operating system from being loaded from the hard drive.
The operating system will be loaded from the hard drive. The loading process takes a little longer during the initial setup. Once all the necessary data has been entered, the operating system will be set up. The operating system is fully loaded once the Windows® 8 start-up screen appears.
PLEASE NOTE!
The initial installation may take a few minutes. Do not unplug the Note­book from the mains or switch it off during the initial installation. This may adversely affect the installation. Do not switch off the Notebook until after the installation has been completed successfully and the startup screen ap­pears.
Page 20
19 of 73
6. Power Supply
6.1. On/Off Switch
Open the Notebook and hold the on/off switch down briefly to switch the Note-
book on or off.
The operating light indicates the current operating mode. Regardless of the operat­ing system, the Notebook will switch off if the switch is held down for longer than 4 seconds continuously.
ATTENTION!
Do not switch your Notebook off while the hard drive or optical drive is be­ing accessed. Otherwise data may be lost. To protect the hard drive, you should always wait for 5 seconds after switching off the Notebook before switching it back on again.
6.2. Mains Power
Your Notebook comes with a universal mains adapter for alternating current which automatically adapts to the available power source. The following values are sup­ported: AC 100–240 V~/50–60Hz. Observe the safety information concerning the power supply on pages 12 ff.
The adapter is connected to an AC outlet via a mains cable. The mains adapter DC cable is connected to the left side of the Notebook (11).
The adapter has an on/off switch (optional). When the switch is set to OFF (0), no power is being consumed and no power is being supplied to the Notebook.
The adapter supplies the Notebook with power in the ON position (I) and also charges the battery. The operating lights on the Notebook provide information about the operating mode. Your battery will also be charged while you work on your Notebook with the mains adapter connected. The mains adapter also con­sumes power when the Notebook is not connected to it. You should therefore al­ways remove the mains adapter plug from the socket when it is not connected to the Notebook or move the switch to the OFF (0) position.
ATTENTION!
Use only the mains adapter and power cable supplied. Please use the supplied mains adapter only with this device.
Page 21
20 of 73
6.2.1. Starting the Notebook
Open up the display as described above and press the on/off switch. Follow the instructions on the screen. Step-by-step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
Select your desired language and then the corresponding country settings.
Licence Agreement
Please read through the licence agreement carefully. It provides important legal in­formation about the use of your software product. To view the text in full, you must slide the scroll bar downwards using the mouse until you reach the end of the doc­ument. You accept the licence agreement by checking the I accept the agreement radio button. Only this entitles you to use the product in accordance with the terms and conditions.
After entering a computer name you can connect your Notebook to the Internet immediately on the “Wireless” page (if you already have an appropriate Internet connection set up).
If you choose to skip this point, you can connect to the Internet later via the Win­dows® 8 interface.
If you have already set up an Internet connection, you can now log in to your Note­book using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed apps.
If you log in on a local account, you can set up a Microsoft account later at any time. The following animated windows simply contain information about using the new
Windows® 8 operating system. No entries of any kind may be made during the animation. The Windows® 8 interface appears after the login process.
PLEASE NOTE!
In the first few days following the initial installation, Windows® 8 may up­date and configure data (e.g. with new updates) which can result in de­lays in the Notebook shutting down and starting up. For this reason, do not switch the Notebook off prematurely. This may adversely affect the instal­lation.
Page 22
21 of 73
6.3. Battery Mode
PLEASE NOTE!
Please charge and discharge the new battery completely two or three times consecutively to ensure that it reaches its optimum performance! Batteries store electrical energy in their cells and then release it again as required.
The service life and performance of your battery depends on careful handling. The battery should always be completely discharged before charging and then fully
charged again to optimise the service life and performance. Please also take note of the safety instructions on „Safety Instructions“.
6.3.1. Inserting the Battery
Insert the battery by sliding it into the compartment until it clicks into place. Be
sure to fasten the battery compartment to prevent the battery falling out.
Page 23
22 of 73
6.3.2. Removing the Battery
To remove the battery pack, slide the battery lock and to the ‘lock open’ position
and remove the battery pack from the compartment.
ATTENTION!
Do not remove the battery while the Notebook is switched on or data may be lost. Take care when storing the battery and when using the Notebook that the contacts on the battery and the Notebook are not soiled or damaged. This could cause malfunctions.
6.3.3. Charging the Battery
The battery is charged using the mains adapter. When the mains adapter is con­nected and switched on, the battery charges automatically regardless of whether or not the Notebook is switched on or not. A complete charge takes a few hours with the Notebook switched off. With the Notebook switched on, the charging process takes significantly longer.
PLEASE NOTE!
The charging process is interrupted if the battery voltage or temperature gets too high.
Page 24
23 of 73
6.3.4. Discharging the Battery
Operate the Notebook on battery power until it turns itself off due to low battery charge.
PLEASE NOTE!
Be sure to save your open files promptly to prevent any data loss.
6.3.5. Battery Performance
The actual operating time varies depending on the configuration of the power-sav­ing functions. You can configure these to suit your requirements in the Control Pa- nel under System and Security, Power Options. Note: your Notebook consumes more power when running certain applications, e.g. when playing a DVD.
6.3.6. Checking the Battery Charge
To check the current battery charge status, move the cursor over the power icon in the task bar.
In battery mode, the icon is displayed as a battery. You can obtain more information about settings by double-clicking the icon.
PLEASE NOTE!
If you ignore the low battery warning, your Notebook will shut down.
ATTENTION!
Never remove the battery while the Notebook is switched on or before the Notebook has shut down completely as this can lead to data loss.
Page 25
24 of 73
6.4. Power Management (Power Options)
Your Notebook offers automatic and customisable power-saving and energy func­tions that can be used to optimise battery life and reduce the overall operating costs.
6.4.1. Sleep
With this setting the content of your Notebook’s RAM is preserved while practical­ly all other components of your Notebook are disabled or their power consumption reduced to a minimum. For example, if you flip the Notebook shut, it puts it into sleep mode and it is automatically restarted upon opening.
PLEASE NOTE!
Changes can be made to the sleep settings at any time in the power op­tions.
7. Display
7.1. Opening and Closing the Display
The special design of the display hinges keeps the display closed without the need for an additional catch.
To open the Notebook, fold the display up to the desired position using your
thumb and forefinger.
ATTENTION!
Do not fold the display back by an angle of more than 120°. Always hold the display firmly by the middle when folding it back, adjusting the position and closing it. Failure to do so may damage the display. Never use force to open the display.
Opening and closing the display can be assigned different functions in the power options.
7.2. Screen Resolution
The integrated monitor can display up to 1366 x 768 pixels. If you change to a dis- play with different settings in the Windows® 8 Control Panel, Appearence and Per- sonalisation wizard, the display may not, in certain circumstances, fill the entire screen area. Distortions can also occur, especially for fonts, when enlarging. You can work with a higher resolution, however, if you connect an external monitor with a higher resolution. The Windows® 8 Control Panel, Appearence and Personalisati- on wizard allows you to adjust the display to the modes supported.
Page 26
25 of 73
7.3. Appearance and Customisation
This program gives you the option of customising your desktop. This includes the background image, the screensaver and other settings for your monitor and your graphics card. The program can be started as follows:
• Right-click on the Windows desktop and left-click on Personalise.
or
• Via Settings, Personalisation, Display by double clicking with the left mouse
button.
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Then click Personalisation. First select the Display option from the dialogue box.
The following settings options are available:
− Set resolution
− Set brightness
− Calibrate colour
− Change display settings
− Display on second monitor
− Customise ClearType text
Page 27
26 of 73
7.4. Connecting an External Monitor
The Notebook has a VGA connection socket (13) as well as an HDMI port (14) for an external monitor.
Shut down your Notebook correctly. Plug the external monitor’s signal cable into the VGA socket on the Notebook
(13). Alternatively, you can use the digital HDMI connection (High Definition Multimedia Interface) (14) to transmit picture and sound signals.
Connect the external monitor to the mains and switch it on. Now switch your Notebook on.
Once the operating system has loaded, the external monitor will be detected. A number of options are available. You can access these as follows:
Run the Desktop App. Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Then click Personalisation. In the dialogue box, first select the Display option and then Project to a se-
cond screen.
Press the + P buttons at the same time to open this menu quicker.
Under Project to a second screen choose from the following options:
− PC screen only
− Duplicate
− Extend
− Second screen only
Page 28
27 of 73
7.4.1. Duplicate
This mode duplicates the Notebook display on the external monitor.
PLEASE NOTE!
In this mode the same screen resolution must be configured for both devic­es.
7.4.2. Extend
In this mode, a blank desktop is displayed on the second (external) monitor. Win­dows on the first screen can be moved onto the second screen and vice versa.
The screen resolution and colour quality can be configured individually for each of the display devices under Settings, Personalisation, Display.
7.4.3. PC Screen Only
The desktop will only be shown on main monitor 1.
7.4.4. Second Screen Only
The desktop will only be shown on the second (external) monitor.
8. Data Input
8.1. The Keyboard
The double assignment of certain keys means that the range of functions available to you is the same as on a conventional Windows keyboard. Some functions are en­tered using the FN key (standard on most Notebooks).
Page 29
28 of 73
8.1.1. Notebook-Specific Keyboard Shortcuts
Description
Fn + F1
Sleep
To configure these keys to suit your requirements, please go to
Power Options
Fn + F4
Smart Power
You will be able to select between two different Energy Saving Modes with this key combination.
Fn + F5
Darker
Reduces the brightness of the display.
Fn + F6
Brighter
Increases the brightness of the display.
Fn + F7
Background lighting
Turns off background lighting for the integrated display to save power. The lighting is turned back on by pressing any key.
Fn + F8
Display
Switches the screen display between LCD, external display and duplicate display.
Fn + F9
Touchpad
Switches the touchpad on and off.
Fn + F10
Mute
Switches the sound on or off.
Fn + F11
Quieter
Decreases the playback volume.
Fn + F12
Louder
Increases the playback volume.
Fn +
Flight mode
Opens the user interface for switching the WLAN and/or Bluetooth function on or off.
Fn + Sc Lk
Scroll
This key combination activates / deactivates the scroll function. Many applications use this function to scroll the screen without moving the cursor
Page 30
29 of 73
9. The Touchpad
In normal mode, the cursor follows the direction specified by moving your fingers in the corresponding direction on the touchpad.
ATTENTION!
Do not use pens or other objects as this can damage your touchpad.
The left and right mouse buttons are found in the lower section of the touchpad and can be used in the same way as those on a conventional mouse.
You can also perform a click or a double-click on the touchpad directly by tapping the touchpad surface once or twice briefly.
In the Windows
®
8 control panel, under the Mouse item, you will find a number of
useful settings to simply your day-to-day tasks.
Page 31
30 of 73
9.1.1. Two-Finger Touchpad Operation
Your touchpad supports two-finger operation which enables certain commands to be executed in some applications.
You can perform the following commands using your touchpad:
Image Command Function
Drag two fingers togeth­er or apart
zoom out from an object/ zoom in on an object
Place one finger in the centre and trace a circle with the second finger
Rotate an object anti-clockwise
Swipe from left to right/ from right to left with two fingers simultane­ously
Page forward/ page back
Swipe down or up with two fingers simultane­ously
Scroll function This function is used in most applications to scroll up and down the screen without having to move the cursor.
Swipe from top to bot­tom on the touchpad
Opens the context menu on the start screen and the top and bot­tom tabs in Internet Explorer
Swipe from the far right across the touchpad
Opens the menu bar
Swipe from the far left across the touchpad
Scrolls through all open windows
Page 32
31 of 73
10. The Hard Drive
The hard drive is your main memory medium and combines high storage capacity with rapid data access. You Notebook is supplied with an OEM version** of the Mi­crosoft Windows®8 operating system which supports all of the Notebook’s perfor­mance features. We have configured your Notebook’s hard drive so that you will be able to work with it optimally without having to install any additional drivers your­self. The Windows®8 operating system requires part of the capacity to manage the hard drive therefore the hard drive’s full capacity is not available. This explains any differences between the BIOS display and the operating system display. The Note­book’s operating system, other applications and security data are located on the hard drive meaning that the full capacity is already reduced.
The first partition (C:\) contains the operating system, the applications and the “Documents” folder for the configured user.
The second partition (D:\) is used for the data backup and also contains drivers (D:\Drivers) and utilities (D:\Tools) for your Notebook.
ATTENTION!
The startup files for system restoration „Resetting the Notebook to its Facto­ry Settings“) and the Windows® 8 installation files are located in non-rewrit­able partitions. These partitions cannot be deleted.
**
Original equipment manufacturer/program versions purchased from the manufacturer which are usu-
ally sold in conjunction with end devices
Page 33
32 of 73
10.1. Important Directories
We have listed the most important directories below and described their contents.
ATTENTION!
Do not delete or modify these directories or their content otherwise data may be lost or system functionality may be impaired.
C:\
The C: drive root directory contains important files required for Windows® 8 startup. On delivery these files are hidden for security reasons.
C:\Programs
As the name suggests, software programs install the files required for running the application into this directory.
C:\Windows The main Windows ®
8
directory. The operating system saves its files here.
D:\Drivers
You will find all the (preinstalled) drivers required for your Notebook in this folder.
D:\Tools
Here you will find the utility programs for your Notebook.
Page 34
33 of 73
10.2. mSATA Hard Drive (optional)
Your notebook is supplied with an mSATA hard drive installed. This mSATA hard drive will speed up your entire system. It optimises access speed
to the standard hard drive. This has the benefit of making your notebook boot up and programs start more
quickly. The Intel® Rapid Boot technology is also supported in mSATA hard drives bigger
than 32GB:
Put the notebook into standby mode as usual. After a predefined time in the BIOS, which you can change to suit your personal
preferences, the notebook switches into hibernate mode automatically (Sleep mode).
Switch the notebook on as normal using the on/off switch and the boot proce-
dure is completed in just a few seconds
ATTENTION!
If you remove the mSATA hard drive, the notebook is no longer able to func­tion properly.
PLEASE NOTE!
Installations and modifications to your device should only be carried out by qualified specialists.
Make sure to use only replacement parts provided by the manufacturer. The appliance may sustain damage if unsuitable replacement parts are used.
Page 35
34 of 73
11. The Optical Drive
11.1. Inserting a disc
Unlike optical drives on a desktop PC, the Notebook uses a mount to hold the disc. When inserting the disc ensure that it is pressed into the mount correctly and that
it clicks into position there.
PLEASE NOTE!
Do not stick protective film or other adhesive labels to the disc. To prevent damage to your drive, do not use any deformed or damaged discs.
ATTENTION!
Do not use scratched, broken, dirty or poor quality discs. The high speeds in the drive can cause these to break destroying your data and damaging your device. Inspect discs carefully before inserting them. If damage or dirt is vis­ible, do not use the disc. Damage caused by faulty media is not covered un­der warranty and repairs will be chargeable. Incorrectly positioning the disc in the mount can cause it to be damaged when closing the drive drawer.
With the device switched on, press the eject button on the optical drive to open
the drawer.
Carefully pull the drawer out fully. Remove the disc from its case, where possible without touching the unprinted
side.
Insert the disc into the drawer with the label up and carefully press it down. The
disc now lies flat in the drawer and audibly clicks onto the disc mount.
Check that the disc can turn freely and then carefully slide the drawer back into
the optical drive until it clicks into place. On delivery, your optical drive is assigned the drive letter “E”. You can easily ac­cess the data on your discs using Windows Explorer (Computer). Run Windows Explorer using the shortcut on the taskbar or by simultaneously pressing the Windows key and the “E” key. When accessing DVD videos (or audio and video files on conventional data CDs), the preinstalled media player is used automati­cally.
If you wish to remove a disc, press the eject button.
ATTENTION!
Do not try to remove the disc from the drive while the Notebook is accessing the optical drive.
Page 36
35 of 73
11.1.1. Emergency Release of a Blocked Disc
In the event of the drawer no longer opening automatically, it can be opened man­ually providing your device has an emergency eject hole.
Exit Windows® 8 and switch off the Notebook. Insert a long pointed object (e.g. straightened paperclip) into the emergency re-
lease until you feel some resistance.
A slight push now opens the drawer. Remove the disc and restart the Notebook.
11.2. Playing/Reading Discs
Your optical drive is capable of playing audio CDs, DVD films or data CDs/DVDs. Once a disc has been loaded, a dialogue box opens containing various playback op-
tions. Normally, there will be a number of different options available. If the dialogue box does not open, there is always the option of accessing the opti-
cal drive via Explorer.
11.3. Regional playback information for DVDs
Playback of DVD film titles includes decoding MPEG2 video, digital AC3 audio data and decoding CSS-protected content. CSS (sometimes also referred to as Copy Guard) is the name of a data protection program used by the film industry to pro­tect against illegal copying.
Among the many controls for CSS licensees, the most important of the playback re­strictions involve country-specific content.
To make it easier to create geographically separate film releases, DVD titles are cod­ed for specific regions. Copyright laws required that each DVD film be limited to a specific region (usually the region where it is sold).
DVD film versions can be published in multiple regions but CSS rules require that each CSS decoder system may only be used for one region.
PLEASE NOTE!
The region setting can be changed up to five times via the viewing soft- ware before the last setting becomes permanent. If you then wish to change the region setting again, this must be carried out by the manufacturer. Any shipping and configuration costs must be borne by the user.
Page 37
36 of 73
11.4. Issues Relevant to the Burner
This section only concerns devices supplied with a CD-RW, a combination CD/DVD read drive or a DVD-RW drive. First some information about blank discs
11.4.1. Blank CDs and DVDs
Normal CDs are pressed by a glass master and then sealed. With blank discs, digi­tal information is burned onto them using the drive’s laser. They are therefore more sensitive then conventional discs.
Because of this, it is essential to avoid, particularly in the case of unused blanks:
• exposure to direct sunlight (UVA/UVB radiation)
• scratches and damage
• extreme temperatures
Page 38
37 of 73
12. The Sound System
12.1. External Audio Connections
Your Notebook has an integrated stereo speaker so you can always reproduce sound without additional devices. Using the external connections provides you with an ideal opportunity to connect your Notebook to external devices.
The Fn + 11 and Fn + 12 keyboard shortcut enables you to adjust the volume.
WARNING! Excessive volume when using headphones or earphones can damage
your hearing. Before pressing play, set the volume to the lowest set­ting. Start playback and increase the volume to a comfortable level. Changing the basic settings of the equaliser can also increase the vol­ume and thus cause permanent damage to your hearing. Changing the drivers, software, equaliser, operating system, etc., can also lead to an increase in the volume and thus cause permanent damage to your hearing.
Listening to a device at high volumes for an extended period via head­phones/earphones can damage your hearing.
Audio output/
digital
audio output
(S/PDIF)
(16)
For sound output using an external sur­round sound decoder via an optical ca­ble (available separately from specialist retailers).
For sound playback via external ste­reo devices such as (active) speakers or headphones.
Microphone socket
(17)
For recording via an external microphone.
Page 39
38 of 73
13. Network Operation
13.1. What is a Network?
We talk about a network when multiple computers are directly connected to one another. This allows users to transfer information and data with one another and to share their resources (printers and drives).
Here are a few concrete examples:
• In an office, messages are exchanged by e-mail and appointments are managed
centrally.
• Users share one printer on the network and back up their data to a central com-
puter (server).
• Two or more computers are connected to one another to play network games or
exchange data.
13.1.1. Network Connection (RJ45)
Your Notebook comes with a GBit LAN connection. Connect one end of a cable with a RJ45 connection (western jack) to your Note-
book’s network interface (12) and the other to a different computer or hub/switch. You can find more details about the network in the Windows® 8 help.
13.2. Wireless LAN (Wireless Network)
Wireless LAN is an optional feature. This function enables you to establish a network connection to a corresponding remote station. Please read about the necessary re­quirements.
The wireless LAN function is enabled and disabled via the Windows® 8 menu and is activated by default.
Press the Fn + keyboard shortcut to open the menu.
ATTENTION!
Do not operate the WLAN function in locations (e.g.: hospitals, aeroplanes, etc.) where there is sensitive equipment. Do not switch the device unless you are sure it will cause no interference.
Page 40
39 of 73
13.2.1. Requirements
A so-called WLAN access point may be used as a remote station. A WLAN access point is a radio transmitting device that communicates with your Notebook and controls access to the connected network.
WLAN access points are frequently found in large offices, airports, train stations, universities or Internet cafés. They provide access to particular services and net­works or to the Internet.
Access permissions are generally necessary and often result in usage charges. Ac­cess points often have built-in DSL modems. These so-called routers establish the connection to the existing DSL Internet connection and the wireless LAN.
A connection can also be established to another end device with wireless LAN func­tionality without an access point. Without a router, however, the network is restrict­ed to those devices directly connected to it.
The wireless network connection works in accordance with the IEEE 802.11n* stand­ard and is compatible with the IEEE 802.11b/g standard.
If encryption is used for the transfer, the same procedure must be used for all devic­es. Encryption is a procedure to protect the network from unauthorised access.
The transfer speed can vary depending on the distance and the number of users ac­cessing the remote station.
* To make use of the full performance, a WLAN router compatible with the 802.11n
standard is required.
Page 41
40 of 73
14. Bluetooth (optional)
Bluetooth technology is used to wirelessly bridge short distances. Bluetooth de­vices transfer data via radio so that computers, mobile phones, printers, keyboards, mice and other devices can communicate with one another wirelessly. Bluetooth wireless technology has numerous possible applications. A few of them are listed below:
• Creating a wireless Internet connection using a mobile phone.
• Transferring files between computers or between a computer and another de-
vice.
• Printing using a Bluetooth printer.
• Using a Bluetooth keyboard and mouse.
• Connecting to a PAN (Personal Area Network).
• Synchronising a personal digital assistant (PDA) with a computer or other device
that uses Bluetooth.
The Bluetooth wireless technology data transfer speed can vary depending on the device or environmental factors. Data can be transferred through walls, jacket pock­ets and briefcases using a Bluetooth device. The transfer between Bluetooth devic­es occurs at the high frequency of 2.4 Gigahertz (GHz). For Bluetooth high speed data transfer, WLAN must be enabled and the partner station must also support the high speed mode.
Press the Fn + keyboard shortcut to open the menu.
ATTENTION!
Do not operate the Bluetooth function in locations (e.g.: hospitals, aero­planes, etc.) where there is sensitive equipment. Do not switch the device unless you are sure it will cause no interference.
14.1. Flight Mode
In flight mode, all wireless connections (e.g. WLAN, Bluetooth) are disabled. Flight mode is disabled by default to ensure that all wireless connections are available.
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings. Click Wireless.
Now enable or disable Flight mode here. Alternatively, use the Fn + keyboard shortcut to open flight mode. Once flight mode is enabled, a small aeroplane is displayed in the traditional desktop task bar. You can also enable/disable flight mode by clicking this icon.
Page 42
41 of 73
15. The Multi-Card Reader
Memory cards are media that are used, e.g. in the field of digital photography, and are gradually replacing the diskette. The shape and capacity of a memory card can vary depending on the manufacturer.
Your Notebook supports the following formats:
• MMC (MultiMediaCard)
• SD (Secure Digital), SDHC, SDXC
When inserting the memory cards, ensure that the contacts are pointing in the right direction, as specified in the list below. Inserting a card incorrectly may damage the card reader and/or the card.
Card type Connection contacts
SD (Secure Digital) pointing downwards MMC (MultiMediaCard) pointing downwards
15.1. Inserting a Memory Card
PLEASE NOTE!
The memory cards can only be inserted in one direction. Please observe the instructions in the section above.
Slide the card in as far as it will go.
15.2. Removing Memory Cards
To remove SD/MMC cards or memory sticks, first push these into the socket to
release the safety catch.
Now pull the card out of the slot and store it properly.
Page 43
42 of 73
16. The Webcam
The integrated webcam enables the use of various communication services.
17. The Universal Serial Bus Port
The universal serial bus (USB 1.1 and USB 2.0) is a standard for connecting input de­vices, scanners and other peripherals. Up to 127 devices can be connected to the USB ports via a single cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1. Your Notebook has 1 USB 3.0 connection socket with charging function for mo-
bile phones (optional) (15) and 2 USB 2.0 connection sockets (18).
PLEASE NOTE!
Where possible, always connect your USB devices to the same port that they were originally installed on. Otherwise they will be assigned a new ID and the drivers will need to be reinstalled.
Page 44
43 of 73
17.1. Charging function for Compatible Mobile Phones (optional)
You can use the USB 3.0 port on the left side of the Notebook (15) to charge a com­patible mobile phone (5 volts max. 1.5A)
The charging function is available in sleep mode and when the Notebook is switched off.
This function is disabled by default and can be enabled in the BIOS under the Advanced, USB3Charger option.
Restart your Notebook and hold down the F2 key during the boot process until
the BIOS menu opens.
or
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Then click Power. Now hold down the Shift key and click on Restart. Now open the Troubleshoot item and then open the Advanced options. Open the UEFI Firmware menu and then click Restart.
ATTENTION!
To save the Notebook’s battery we recommend only using the charge func­tion in mains power mode. Disconnect external data media from this socket when you are not using the Notebook. The charging function is not available with less than 20% battery power.
Page 45
44 of 73
18. Securing your Notebook
Your new Notebook has software and hardware solutions for preventing unauthor­ised access.
18.1. Power-on Password
You can protect your Notebook against unauthorised use with a power-on pass­word. On switching on the Notebook, a password prompt will appear on the screen. The password is set up in the BIOS .
ATTENTION!
Keep your password in a safe place. If you forget your password, you have no way of deleting it. If this happens, contact your service centre.
You can also use the Windows® 8 security options to protect your data against unauthorised access.
18.2. Kensington Security Lock
you can use a so-called Kensington security lock to protect your Notebook against theft. This security lock (complete with cable) is usually available as an accessory in specialist retailers.
To attach the security lock, wind the cable around a stationery object, e.g. a table leg. Plug the lock into the Kensington device and turn the key to lock it. Keep the key in a safe place.
Page 46
45 of 73
19. Software
This section deals with the subject of software. We distinguish here between the operating system, the software (the applications), the Windows activation and the BIOS.
19.1. Getting to know Windows® 8
Windows® 8, the new operating system from Microsoft, contains a series of innova­tive functions and new technologies that your Notebook uses to work quickly and reliably. At the same time, it is also designed to be easy to use.
19.2. Windows Activation
To protect against software piracy, Microsoft has introduced product activation. The Windows® 8 version installed on your Notebook and supplied with the Notebook must be activated to enable you to use of all Windows® 8 functions.
To do this, you require simply an Internet connection. The activation process is fully automatic; no personal data will be transmitted.
If no Internet connection is available, select telephone activation as follows:
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings. Select the Activate Windows item. Now click activate by phone. Click Next after choosing your country. Call one of the specified hotlines on the telephone and read out the column of
figures displayed when prompted to do so.
You will then be given a confirmation ID over the telephone.
Enter this in the empty field and click Activate.
PLEASE NOTE!
If you have not activated Windows® 8, not all functions will be available to you under PC settings. A watermark will also continue to be displayed at the bottom right on the traditional desktop.
Page 47
46 of 73
19.3. Windows® 8 – What’s New
Microsoft Account
A Microsoft account is an e-mail address and password for logging in to Windows®
8. You can use any e-mail address. We recommend using the address you use to
communicate with friends and log into your favourite web sites, however. The Microsoft account also allows you to purchase or download apps from the Store and install them on up to five devices.
Once you have logged on to your Notebook using a Microsoft account, you also have access to the various services and programs provided by Microsoft.
• The contact information and status updates for your friends from services such
as Hotmail, Facebook, Twitter and LinkedIn will be updated automatically as soon as you run these services using your Microsoft account.
• You can also access and share your photos, documents and other files via
SkyDrive, Facebook and Flickr.
• Your personal settings, including designs, language settings, Internet favourites
and apps will be synchronised with each PC running Windows® 8 that you log on to.
• You can obtain Apps from the Windows® 8 Store. You can use these on any PC
running Windows® 8 that you log on to.
If you wish to create a Microsoft account in Windows® 8, proceed as follows:
Move the mouse pointer into the top right or bottom corner of the screen and
click Settings.
Click Change PC settings. > Users > Switch to a Microsoft account.
Page 48
47 of 73
Taskbar (Desktop Mode)
You can start programs from the taskbar at the bottom of the screen and switch be­tween programs already running. In Windows® 8 you can place any program onto the taskbar, so that you can always open it with a single click. You can also rear­range the icons on the taskbar by simply clicking on them and dragging them to the desired position. Move the mouse pointer over the icons and thumbnails of each file or each open window and that program will be displayed. If you move the mouse pointer over the thumbnail, a full screen preview of the window in question appears. When you move the mouse pointer away from the thumbnail again, the full screen preview closes.
Jump Lists
Jump lists offer a practical way of calling up recently opened files. To display the re­cently used files, simply right-click on the application icon in the taskbar. Thus if you right-click on the Word icon, the recently used Word documents are displayed. You can also easily place other files you wish to have easily to hand in the jump list so that they are always displayed. This allows you to access documents that you use frequently in just a few mouse clicks.
The jump lists for certain programs such as Windows® 8 Media Player can be popu­lated in advance with frequently used commands. Thus, for example, you will see options to play all music or to reopen the last playlist in the jump list for Windows® 8 Media Player.
The frequently visited and last visited websites are displayed in the jump list for In­ternet Explorer. This therefore allows you to quickly access commands for certain programs that could previously only be called up from the program itself, such as the command to compose a new e-mail message.
Improved Desktop
Windows® 8 simplifies working with windows on the desktop. You therefore have more intuitive options for opening and closing, changing sizes and rearranging.
Windows® 8 makes completing everyday tasks even simpler. The locking function (snaps) makes it easier to compare two open windows, for example. You do not need to manually adjust the size of the opened windows to make a comparison. Simply drag the window to one of the screen margins using the mouse and it will fill half of the screen.
Click the window’s title bar, “shake” it and all other opened windows are displayed as icons on the task bar. “Shake” the window once more and the other windows are displayed again.
Page 49
48 of 73
Improved Device Management
Windows® 8 allows you to connect, manage and use all devices via the central “De­vices” function.
All devices are shown in a central location. With the new “Device Stage” technology, however, Windows® 8 goes one step fur-
ther with device management. Device Stage helps you to use all compatible devic­es that are connected to the computer. Thanks to Device Stage you can now display the device status and perform frequently used commands within a single window. Here you will even find images of the devices so you can easily see which devices are connected. The device manufacturers can even adjust Device Stage. For exam­ple, if your camera manufacturer releases an updated version of Device Stage, you can see details such as the number of photos on the camera and get links to useful information when you connect the camera to your Notebook.
HomeGroup
With home network groups, a Windows® 8 function, connecting home computers becomes child’s play. A home network group is set up automatically when you con­nect the first PC running Windows® 8 to the home network. Adding additional PC’s running Windows® 8 to the home network group can be done very quickly. You can specify precisely what should be shared on each PC with all other PCs in the home network group. Sharing files on the various home PCs – and on many other devic­es – is then as easy as if all the data were located on a single hard drive. Thus, you can save digital photos on the computer in the study and then access them easily on a Notebook in any other room. Similarly, the printer in the study is automatically shared among all PCs in the house once they are part of the home network group.
19.4. Overview
The greatest innovation with Windows® 8 is the Start screen. This key element replaces the Start menu in Windows® 8. Here you can run all the main programs and services.
As with previous versions, operation is by inputting commands using the mouse or keyboard.
The Start screen can be opened at any time using the (Win) key. This key also al­lows you to switch back and forth between the Start screen and an active applica­tion. To switch to an application other than the last one opened, press the Win+Tab keyboard shortcut.
A central feature of the Start screen are the tiles which each represent an applica­tion or function. They are shown in blocks and you can define the number of blocks and their columns yourself.
Drag & drop the tiles to the desired position using the mouse.
Page 50
49 of 73
19.5. Logging in to Windows
To be able to work with Windows® 8, you must set up a Windows® 8 user account.
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click Settings.
Next, select Change PC settings. Open the User category.
Select Add a user, to set up additional user accounts.
Windows® 8 allows you to log in using 3 different login procedures. Windows® 8 gives you the choice of standard login by password, a PIN or an image code. To set up a PIN or image code, you must first have set up a password for Windows ® 8.
19.5.1. Setting up a Password for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings. Select the User item. Click Change your Password and follow the instructions.
19.5.2. Setting a PIN for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings. Select the User item. Click Create a PIN and follow the instructions.
19.5.3. Setting Up an ImageCode for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings. Select the User item. Click Create a Picture password and follow the instructions.
PLEASE NOTE!
The image code login has been specially designed for touch screen devices. In devices without a touch screen, use the mouse instead of finger move­ments or gestures.
PLEASE NOTE!
To be able to use all Microsoft services you need to log in using a Microsoft account.
Page 51
50 of 73
19.6. Linking a User Account to a LiveID
You can link your user account to a LiveID. This enables you to log in to any comput­er or mobile device connected to the Internet using your LiveID.
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click Settings.
Next, select Change PC settings. Open the User category. Select Switch to a Microsoft account. Now enter your Windows Live ID e-mail address.
If you have not yet created a Windows Live ID account or added an e-mail ad­dress to your Windows Live ID account, you can create and edit your Windows Live ID account at http://www.windowslive.com/.
Follow the instructions on the screen to complete the link.
Page 52
51 of 73
19.7. Windows® 8 Start Screen
Once the operating system is running, you will see the new Windows® 8 Start screen.
(image similar)
Information such as the following may be displayed here, for example:
Windows® 8 App
Windows® 8 apps are executable programs.
The “Desktop” tile opens the traditional Windows display.
The Internet Explorer tile launches Internet Explorer
PLEASE NOTE!
Apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than the standard tiles.
Page 53
52 of 73
19.8. Windows® 8 Desktop
This image shows a symbolic representation of additional programs.
(image similar)
Information such as the following may be displayed here, for example:
Classic desktop apps
Desktop apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than the standard tiles.
The classic “Power Recovery” desktop app launches the system recovery program.
The classic “Microsoft Office” desktop app launches the Microsoft Office program.
Windows® 8 apps from third-party suppliers are displayed as follows. Example:
Windows® 8 apps from third-party suppliers
These Windows® 8 apps are executable programs from third-party suppliers.
This Windows® 8 app launches the “PowerDVD” program.
This Windows® 8 app launches the “YouCam” program.
Page 54
53 of 73
19.8.1. Working with Windows® 8 and Cassic Apps
Menu Instructions
Opening an app Click the desired app with the left mouse but-
ton.
Closing an app PLEASE NOTE!
Not all apps need to be closed! Win­dows® 8 closes unused apps automati­cally.
Press the Alt+F4 keyboard shortcut. Click on the top edge of the running app and
drag the app down to the edge of the display.
Displaying all apps Right-click on the Start screen.
Click All Apps in the bottom right-hand cor-
ner of the display.
Linking apps to the Start screen
Right-click on the Start screen. Click All Apps in the bottom right hand cor-
ner of the display.
Right-click on the desired app to highlight it. Click Pin to Start in the bottom left-hand
corner of the display.
Linking apps to the taskbar Right-click on the Start screen.
Click All Apps in the bottom right-hand cor-
ner of the display.
Right-click on the desired app to highlight it. Click Pin to Taskbar in the bottom left-hand
corner of the display.
Installing an app Run the Shop app.
Search for the desired app and
click Install. The app will now be download­ed and installed in the background.
Page 55
54 of 73
Uninstalling an app Right-click on the Start screen.
Click All Apps in the bottom right hand cor-
ner of the display.
Right-click the desired app. Click Uninstall at the bottom edge of the
display.
PLEASE NOTE!
Not all apps can be uninstalled. If the uninstall option is not displayed, this app can not be uninstalled.
Running apps as administra­tor
(Only possible with desktop apps)
Right-click the desired app. Now click Run as administrator on the bot-
tom edge of the display.
Running an app in a new win­dow
(Only possible with desktop apps)
Right-click the desired app. Click Open new window at the bottom edge
of the display.
Searching for apps Move the mouse pointer into the top right-
hand corner of the display, move the mouse down and click Search.
Enter the name of the app.
Arranging apps Click and hold the left mouse button down
on the desired app and drag it to the desired position.
Selecting multiple apps
Right-click the desired apps.
Page 56
55 of 73
19.9. Using the Search Function
Use the search function to find individual tasks, settings or apps quickly.
Move the mouse pointer into the top right or bottom corner of the display and
click Search.
Enter the name of the app or file and select an entry from the results list on the
left-hand side of the display.
The search results are arranged by Apps, Settings and Files. Choose the category (Apps, Settings or Files) in which the desired file is located.
20. Control Panel
The Control Panel allows you to customise the Start interface.
PLEASE NOTE!
Windows® 8 must be activated for changes to be made.
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Menu Instructions
Windows aktivieren
Activate Windows® 8 by telephone or over the Internet.
Customise Set the background image for the
lock screen and the Start screen here.
Select a profile image here.
User Create and update user accounts here.
Set or modify the PIN or image code.
Notifications Set the various program instructions to On or Off here.
Search Define the settings for the search function here.
Define the app the search function should work with
here.
Sharing Define the settings for the share function here.
Define the apps to be shared
here.
Page 57
56 of 73
General Configure the general settings for time zone, spell
checking, language and memory here.
Reinstall the operating system without losing personal
user data or key basic settings.
Restore your Notebook to its factory settings. Perform a reboot with a CD inserted.
Data protection Configure the security settings for apps, accounts and
Windows® 8 here.
Devices Install additional external connected devices here, e.g.
joystick or USB speaker.
Enable or disable Download over metered connec-
tions. This function prevents drivers for newly added devices being searched for and downloaded via the In­ternet.
Wireless Enable or disable flight mode here.
Enable or disable the integrated WLAN function here.
Simplified operation
Customise the contrast, mouse pointer and tab bar to
your requirements here.
Synchronise set­tings
Configure synchronisation of your Notebook with the
connected network.
Configure here whether or not an online synchronisa-
tion should also be performed with payable networks.
Home network group
Here you will see the home network group and the apps
and files shared within it.
Windows Update Allow Windows® 8 to search the Internet for any neces-
sary Windows® 8 updates.
Page 58
57 of 73
20.1. Windows® 8 Power On/Off Functions
The new Windows® 8 allows you to restart your Notebook, put it into sleep mode or shut it down. Changes can be made to the sleep settings at any time in the power options.
In sleep mode the content of your Notebook’s RAM is preserved while practically all other components of your Notebook are disabled or their power consumption reduced to a minimum. For example, if you flip the Notebook shut, it puts it into sleep mode and it is automatically restarted upon opening.
Restarting Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Restart.
Your Notebook will now restart.
Sleep Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Sleep .
Your Notebook will now switch to sleep mode.
Shut down Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Shut down.
Page 59
58 of 73
20.2. Control Panel Settings
You can change Windows® 8 settings using the control panel. These settings control virtually everything about how Windows® 8 appears and functions and enable you to customise Windows® 8 to meet your requirements.
When the control panel is run for the first time, some of the most frequently used control panel elements are displayed grouped together by category.
If you require additional information about a control panel element in the catego­ry view, you must hold the mouse pointer over the icon or category name and read the text shown there.
To run one of these elements, click on the associated icon or category name. A list with executable tasks and a selection of individual control panel elements
opens for some of these elements. To launch the control panel, proceed as follows:
Move the mouse pointer into the top right or bottom corner of the display and
click Search.
Enter Control Panel in the search field. Click on Control Panel.
Page 60
59 of 73
20.3. Resetting the Notebook to its Factory Settings
In the event of problems with the installation or other software problems which make it necessary to reinstall the software, Windows® 8 offers three options for rein­stalling Windows® 8 on your Notebook.
First ensure that you have backed up all important data and programs.
20.3.1. Running System Restore
After restarting, press the F11 key or start up the Notebook with the F11 key
held down to launch PowerRecover.
or
Click the PowerRecover Windows® 8 desktop app to run the program from the
Windows® 8 desktop.
You will be offered 3 possible options:
− Burn Drivers and Tools to an Optical disc
Create a support disc
− Refresh your PC without affecting your files
Update your Notebook without deleting your data.
− Restore
Choose between two recovery options:
● Restore to HDD – no backup of user data All data on the Notebook will be permanently deleted. The factory settings will be restored.
● Restore to HDD – with backed up user data The factory settings will be restored and all user data under C:\USER will be backed up.
PLEASE NOTE!
Always perform any type of recovery using mains power.
ATTENTION!
The recovery process takes a long time when you select the option to back up user data. Only the data located in the folder C:\USER will be backed up. All other data will be deleted. It is therefore important to perform regu­lar data backups to external data media. We do not accept any liability for claims for compensation arising from the loss of data or any consequential damages incurred.
Click Next and follow the on screen instructions to restore the factory settings.
Page 61
60 of 73
20.4. BIOS Setup Program
BIOS setup (the basic hardware configuration of your system) offers you numerous configuration options for operating your Notebook. For example, you can modify the operating mode for interfaces, security features or power supply management. The Notebook has already been configured by the manufacturer to ensure opti­mum operation.
ATTENTION!
Please only change settings where strictly necessary and if you are familiar with the configuration options.
20.4.1. Running the BIOS Setup
You can only run the configuration program upon system startup. If the Notebook has already started up, switch it off and restart it. Press the F2 function key to run the BIOS SETUP.
Page 62
61 of 73
20.5. Kaspersky Internet Security
Kaspersky Internet Security is a comprehensive tool to protect your data. The use of it not only offers you full protection against viruses, but also against spam and at­tacks against your network. Further components of the software will protect your computer against threats and phishing attacks unknown up to now and allows the access to the Internet to be restricted sensibly. Full protection will cover all areas of data transfers and exchanges.
Kaspersky Internet Security is already installed, so that additional installation will not be necessary. If you nevertheless have to carry out an installation (e.g. after sys­tem restoration), you will find the software package on the Application & Support disc supplied with the machine.
Kaspersky Internet Security consists of the following security components:
• File Anti-Virus File Anti-Virus will protect the file system of the computer against infection. The components will be started when the operating system is started. They will be permanently located in the working memory of the computer and will check all the files that are opened, saved or started on your computer and all the connec­ted hard drives. Kaspersky Internet Security will intercept any attack on a file and will check the respective file for known viruses. A file will then only be released for use if it is virus-free or has been successfully disinfected by the program.
• Mail Anti-Virus Mail Anti-Virus will check the incoming and outgoing emails on your computer. An email will only be delivered to the respective recipient if it does not contain any dangerous elements.
• Web Filter / Child Protection The Web Filter will block visits to dangerous web pages and will create a safe working environment during Internet surfing in this way. Child protection al­lows access to Internet resources and programs to be restricted flexibly for diffe­rent users of the computer depending on age.
PLEASE NOTE!
Kaspersky Internet Security will be activated automatically if the Internet connection is active. Manual activation will not be necessary. Kaspersky In­ternet Security will be deactivated automatically after a test period. We re­commend the acquisition of a licence in good time, to ensure the optimum protection of your computer, for this reason.
Page 63
62 of 73
The Kaspersky Internet Security Package will be updated with the most up-to-date virus information for a test period after the free registration. Read the activation in­formation about this on the internet at: http://www.Kaspersky.com.
PLEASE NOTE!
The operating system and anti-virus software are automatically updated when the first online connection is made. These processes usually take a few minutes, during which time the operating speed of the computer may be af­fected although this is only noticeable on initial start-up.
20.6. Windows® 8 – Help and Support
Here you will find a comprehensive collection of instructions, help sections and troubleshooting suggestions.
This help covers the entire spectrum of the Windows® operating system. It is recommended for both beginners and experts. The information is subdivided
into topics and can be printed out or bookmarked. Start as follows:
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click Settings.
Now click on Help. Choose the topic you are interested in.
Page 64
63 of 73
21. FAQ – Frequently Asked Questions
Do I need to install the discs supplied?
− No All programs are preinstalled. The discs are provided as backup copies
only.
Where can I find the necessary drivers for my Notebook?
− The drivers can be found in the second hard drive partition in the
Drivers and Tools folders.
What is Windows® 8 activation?
− You will find a relevant section in these operating instructions containing de-
tailed information on this topic.
How do I activate Windows® 8?
− Windows®8 is activated automatically as soon as an Internet connection is es-
tablished.
How do I activate Windows® 8 without an Internet connection?
− Windows® 8 can also be activated over the telephone. Follow the instructions
in the section “„Windows Activation“ to activate Windows® 8 by telephone.
When is restoring factory settings recommended?
− This method should only be selected as a last resort. Read about the alterna-
tives in the System recovery section.
How do I perform a data backup?
− Perform a backup or backup synchronisation of selected data onto exter-
nal media to familiarise yourself with the technology. A backup is of no use if you are unable to recover the data or if the medium is faulty or is no long­er available.
Why do I need to reinstall my USB device even though I have already done it?
− If the device is not operated on the same USB port as the one it was installed
in, it automatically receives a new identifier. The operating system then treats it like a new device and tries to reinstall it.
− Use the installed driver or connect the device to the port on which it was
originally installed.
Page 65
64 of 73
22. Customer Service
22.1. What To Do In Case of Hardware Problems
Malfunctions can sometimes have quite trivial causes, but they may also be the re­sult of defective components. We have included a brief troubleshooting guide be­low which may help to solve any problems.
If these tips don’t do the trick, then we’ll be more than pleased to help you out. Just give us a call!
22.2. Find The Cause
Start by carefully checking all the cable connections. If the indicator lamps are not on, ensure that the Notebook and all peripheral devices are connected to the pow­er supply.
• If you are in battery mode, connect the Notebook to the mains adapter and check that the battery is charged.
• If you wish to operate the Notebook using the mains adapter, disconnect the mains adapter from the socket and connect an electrical appliance such as a lamp to the same socket to test it. If the lamp does not work either, seek the ad­vice of an electrician.
• Turn off the Notebook and check all cable connections. If the Notebook is con­nected to peripheral devices, check all cable connections. Do not swap around the cables for the various devices, even if they look alike. The pin assignment within the cables may be different. Once you have ensured that the device’s power supply is functioning and all connections are intact, then switch the
Notebook back on.
Page 66
65 of 73
22.2.1. Faults and Possible Causes
The screen is black.
• This fault can have various causes:
− The operating light (on/off switch) does not light up and the Notebook is in
hibernation. Solution: Press the on/off switch.
− The sleep light is flashing. The Notebook is in sleep mode.
Solution: Press the on/off switch.
− The background lighting has been disabled using the Fn+F7 keyboard
shortcut. Solution: Reactivate the background lighting by pressing any key.
The Notebook turns itself off during operation.
The battery may be flat. Plug the Notebook in using the mains adapter and
charge the battery.
The Notebook cannot be switched on.
If you are running the Notebook on batteries, check that they have been insert-
ed correctly and are fully charged.
Wrong time and date displayed.
Click the clock display in the taskbar. Select the
Datums- und Uhrzeiteinstellung ändern option and enter the correct values.
No data can be read by the optical drive.
Check whether the disc has been inserted correctly.
The WLAN/Bluetooth connections do not work.
Check that flight mode is disabled.
The touchpad is not working.
To activate the touchpad, press the Fn + F9 keyboard shortcut.
Apps (e.g. the weather app) cannot be displayed as live tiles.
Check the date, time zone and time.
Page 67
66 of 73
22.3. Do You Need More Help?
You’ve checked through the suggestions in the previous section and you’re still hav­ing problems with your device? Then call our hotline or contact us at www.medion. de/service. We’ll be glad to help you.
Before contacting your technology centre, however, prepare the following informa­tion:
• Have you made any upgrades or modifications to the initial configuration?
• What peripheral devices do you use?
• What messages, if any, appear?
• What software were you using when the problem occurred?
• What steps have you already taken to try and rectify the problem?
22.4. Driver Support
The system has been thoroughly and successfully tested with the installed drivers in our test laboratory. It is normal in the computer sector, however, for the drivers to need updating from time to time. This is because there may be compatibility prob­lems with other components (programs, devices) which have not yet been tested. You can find current drivers on the Internet at the following address:
http://www.medion.com Please use the service address for the country where the device was purchased.
Page 68
67 of 73
22.5. Transport
Please note the following information if you wish to transport the Notebook:
• Switch the Notebook off. This ensures that the hard drive heads are automatical­ly moved to a safe area to avoid damage. Remove any inserted DVDs/CDs.
• After transporting the Notebook, wait until the appliance has reached room temperature before switching it on. Large changes in temperature or fluctua­tions in humidity can cause moisture build-up within the Notebook due to con­densation. This can cause an electrical short circuit.
• Close the Notebook and check that the lid is firmly closed.
• Always use a Notebook carrying case to protect the Notebook from dirt, mois­ture, vibrations and scratches.
• Always use the original cardboard packaging to ship your Notebook and obtain advice on this from your carrier.
• Always charge your battery and any spare batteries fully before embarking on longer trips and do not forget to take along your mains adapter.
• Find out about the power and communication options available in your destina­tion before travelling.
• Where necessary, purchase the required power or communication adapter (LAN etc.) before departure.
• When shipping the Notebook, pack the battery separately in the cardboard packaging.
• When going through the hand luggage check at the airport it is recommend­ed that you send the Notebook and all magnetic storage media (external hard drives) through the x-ray facility (the device that scans your bags). Avoid the magnetic sensor (the structure that you walk through) or the magnetic hand scanner (the manual device used by security personnel) as this may destroy your data, among other things.
Page 69
68 of 73
22.6. Maintenance
ATTENTION!
None of the parts inside the Notebook housing require cleaning or mainte­nance.
You can increase the lifespan of your Notebook with the following measures:
• Always unplug the device, disconnect all cables and remove the battery before cleaning.
• Clean the Notebook with a damp, lint-free cloth.
• Do not use solvents, corrosive or aerosol-based detergents to clean the device.
• Do not use CD-ROM cleaning discs or similar products that clean the lens of the laser to clean your optical drive.
• Dust or grease on the touchpad can affect its sensitivity. Remove the dust or grease from the surface of the touch pad with a strip of adhesive tape.
• Over time, dust can collect inside the Notebook which then blocks the vents. This can lead to an increase in the fan speed and, therefore, also increase the op­erating volume of your Notebook. It can also lead to overheating and malfunc­tions. Therefore, have the interior of the Notebook cleaned by your service de­partment or a specialist at regular intervals.
22.7. Care of the Display
• Close the Notebook when you are not working with it. Avoid scratching the sur­face of the screen because it can be easily damaged.
• Make sure that no water droplets remain on the screen. Water can cause perma­nent discolouration.
• Clean the screen with a soft, lint-free cloth.
• Do not place the screen in strong sunlight or near ultraviolet light.
• The Notebook and its packaging can be recycled.
PLEASE NOTE!
The surfaces of the device are covered in protective film to prevent scratch­ing during production and transport. Remove the film once the device has been set up properly and before you use it.
Page 70
69 of 73
23. Upgrading/Modifying and Repair
• Upgrades and modifications to your Notebook should only be carried out by qualified specialists. If you do not have the necessary qualifications, have the
work carried out by a qualified service technician. Please contact your custom- er service department if you have technical problems with your Notebook.
• If a repair must be carried out, please contact only our authorised service part- ners.
23.1. Notes for Service Technicians
• Only service technicians may open up the Notebook housing or upgrade or modify your Notebook.
• Use only original replacement parts.
• Before opening the housing, disconnect all power and connecting cables and remove the battery. If the Notebook is not disconnected from the power supply before being opened, there is a risk that components could be damaged.
• Internal components of the Notebook may be damaged by electrostatic dis­charge (ESD). Carry out repairs, as well as system enhancements or modifica­tions, at an ESD workplace. If such a workplace is not available, wear an antistat­ic cuff or ensure you are touching an earthed, metallic object. We will charge for any repairs to damage caused by incorrect handling.
23.2. Information on Laser Radiation
• The Notebook can contain laser equipment classified as laser class 1 to laser class 3b. The equipment meets the requirements for laser class 1.
• By opening the housing of the optical drive, you will have access to laser equip­ment classified up to laser class 3b.
The following should be observed when removing and/or opening this laser equip­ment:
• The integrated optical drive contains no parts that require repair or mainte­nance.
• Repairs to the optical drive should only be carried out by the manufacturer.
• Do not look directly into the laser beam, even when using optical instruments.
• Do not expose the laser beam. Avoid exposing your eyes or skin to the laser beam – either directly or through scattered laser radiation.
Page 71
70 of 73
24. Recycling and Disposal
Should you have any questions concerning the disposal please contact your dealer or customer service.
Packaging
Your device has been packaged to protect it against transportation damage. Packaging is raw material and can be re-used or added to the recycling system.
Device
At the end of its life, the device should not be disposed of in household rubbish. Enquire about the options for environmentally friendly and ap­propriate disposal.
Batteries
Do not dispose of used or defective batteries in the household rubbish! They should be taken to a collection point for used batteries.
Page 72
71 of 73
25. European EN 9241-307 Class II Standard
For active matrix LCDs (TFT) with a resolution of 1366 x 768 pixels, each of which consist of three sub-pixels (red, green, blue), there are a total of approx. 3.1 million control transistors in use. Due to this very high number of transistors and the asso­ciated extremely complex manufacturing processes used, occasionally one or more pixels can fail or become incorrectly controlled.
In the past, there were a number of approaches for defining the permitted number of pixel defects. However, these approaches were mostly very complicated and var­ied from one manufacturer to the next. When handling warranty issues for all of its display products, MEDION therefore adheres to the strict and transparent require­ments of the standard ISO 9241-307, Class II; which has been briefly summarised below.
The EN 9241-307 standard defines, amongst other things, the generally applica­ble guidelines relating to pixel defects. Pixel defects are categorised into four fault classes and three defect types. Every individual pixel consists of three sub-pixels, each of which is assigned a basic colour (red, green, blue).
Pixel structure
5 Pixel
Rows
Sub-Pixel
Pixel
blue green
red
5 Pixel
Page 73
72 of 73
Pixel defect types:
• Type 1: permanently illuminated pixel (bright, white dot) even when not activated. A white pixel occurs due to the illumination of all three sub-pixels.
• Type 2: non-illuminated pixel (dark, black dot) even when activated.
• Type 3: abnormal or faulty red, green or blue sub-pixel (e.g. permanently illuminated at half brightness, one colour not illuminated, flashing or flickering but not type 1 or 2)
Supplement: Type 3 cluster (= failure of two or more sub-pixels within a 5 x 5 pixel block). A cluster is a field of 5 x 5 pixels (15 x 5 sub-pixels).
EN 9241-307, error class II
Resolution Type 1 Type 2 Type 3
Cluster
Type 1, type 2
Cluster
Type 3
1024 x 768 2 2 4 0 2 1280 x 800 3 3 6 0 3 1280 x 854 3 3 6 0 3
1280 x 1024 3 3 7 0 3
1366 x 768 3 3 7 0 3
1400 x 1050 3 3 8 0 3
Page 74
73 of 73
25.1. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not ins­talled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip­ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for com­pliance could void the user’s authority to operate the equipment. Shielded interface cables, if any, must be used in order to comply with the emission limits
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use