Page 1
USA:
+1 866.782.6339
|
salesusa@standexmeder.com
EMEA:
+49 7731/8399-0
|
info@standexmeder.com
APAC:
+86 21/37606000
|
salesasia@standexmeder.com
standexelectronics.com
Series Datasheet
Version 02
28
Feb 2019
Page
M.
Reizner
1
MK03 Series Reed Sensors
➢ Features: Cylindrical Reed Sensor, Choice of Cable
Termination & Lengths available, Various Case Sizes
➢ Applications: Door & Window Contacts, With Magnetic
Floats for Water Level Detection, Position Sensing
➢ Markets: Appliance, Industrial, Security & Others
Customer
Options Switch Model
Unit
Contact Data
66 75 90
Rated Power (max.)
Any DC combination of V&A not to exceed their individual max.’s
10 10 10 W
Switching Voltage (max.)
DC or peak AC
180 500 175 V
Switching Current (max.)
DC or peak AC
0.5 0.5 0.5 A
Carry Current (max.)
DC or peak AC
1.25 1.0 1.0 A
Contact Resistance (max.)
@ 0.5V & 50mA
150 200 150 mOhm
Breakdown
Voltage (min.)
According
to EN60255-5
0.25 1.5 0.2 kVDC
Operating Time (max.)
Incl. Bounce; Measured with w/ Nominal Voltage
0.7 0.5 0.7 ms
Release Time (max.)
Measured
with no Coil Excitation
0.05 0.1 1.5 ms
Insulation
Resistance (typ.)
Rh<45%, 100V Test
Voltage
10
10
10
10
10
9
Ohm
Capacitance
(typ.)
@ 10kHz
across open Switch
0.3 0.4 1.5 pF
Part
Description: MK03- 0 X 00X - 000X
Contact
Qty
Contact
Form
Switch
Model
Magnetic
Sensitivity
Cable
Length (mm)
Termination
1 A, B, C 66, 75, 90 B, C, D, E
200, 300, 500, 1000, 1500,
2000, 3000, 5000
W = Stripped &
Tinned
Page 2
USA:
+1 866.782.6339
|
salesusa@standexmeder.com
EMEA:
+49 7731/8399-0
|
info@standexmeder.com
APAC:
+86 21/37606000
|
salesasia@standexmeder.com
standexelectronics.com
Series Datasheet
Version 02
28
Feb 2019
Page
M.
Reizner
2
MK03 Series Reed Sensors
MK03 Reed Sensor
Environmental Data
Unit
Shock Resistance (max.)
1/2 sine wave duration 11ms
50 g
Vibration Resistance (max.)
20
g
Operating Temperature
Cable not moved
-30 to 80
°C
Operating Temperature
Cable moved
-5 to 80 °C
Storage Temperature
-30 to 80
°C
Handling & Assembly Instructions
➢
Max torque of screw is 1Nm
➢
Cable bending-radius is diameter x 15
➢
Min. bending distance to housing is 5mm
➢
Drag mark out of the mounting area forbidden
➢
Decrease switching distance by mounting on iron
➢
Do not use magnetically inductive screws
➢
Series resistor recommended for > 5m cable length
Housing and Lead Specifications
Housing Material PBT Glass Fiber Reinforced
Case Color White
Sealing Compound Polyurethane
Cable Type Flat Cable
Cable Material PVC
Cross Section (mm2) 2 x 0.14
Layout
Top View
Glossary Contact Form
Form A
NO = Normally Open Contacts
SPST = Single Pole Single Throw
Form B
NC = Normally Closed Contacts
SPST = Single Pole Single Throw
Form C
Changeover
SPDT = Single Pole Double Throw
Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For
general information only. For more specific information, please consult the product datasheet, available upon request.
This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be
incorporated in future revisions.
For deviating values, most current specifications and products please contact your nearest sales office.
Glossary Magnetic Sensitivity
Sens. A B C D E F G
AT
05-10
10-15
15-20
20-25
25-30
30-35
35-40
Life Test Data
*Load increase reduces life expectancy of Reed Switches
Load
Life time
Loading...