DIGITAL DRUM
Instruction Manual
Taking Care of Your Digital Drum Set
Thank you for purchasing this digital drum module. The drum module has been
developed to act and play like a drum set but with greater ease. Before you use
the instrument, we recommend you to read through this manual.
2
Location
Power Supply
Make sure to use the suitable AC
adaptor, and also make sure the AC
outlet voltage at your country
matches the input voltage specified
on the AC adaptor`s label.
Turn the power switch OFF when the
instrument is not in use.
An AC adaptor should be unplugged
from the AC outlet if the instrument is
not be used for an extended period of
time.
Unplug the AC adaptor during electric
storms.
Avoid plugging the AC adaptor into
the same AC outlet as appliance with
high power consumption, such as
electric heaters or ovens. Also avoid
using multi-plug adaptors since these
can result in reducing the sound
quality, operation errors, and possibly
damage.
Turn Power OFF When Making
Connections
To avoid damage to the instrument
and other devices to which it is
connected, turn the power switches of
all related device OFF prior to
connecting or disconnecting cables.
Handling and Transport
Cleaning
Electrical Interference
Never apply excessive force to the
controls, connectors or other parts of
the instrument.
Always unplug cables by gripping the
plug firmly, but not pulling on the
cable.
Disconnect all cables before moving
the instrument.
Physical shocks caused by dropping,
bumping, or placing heavy objects on
the instrument can result in scratches
and more serious damage.
Clean the unit with a dry soft cloth.
A slightly damp cloth may be used to
remove stubborn grime and dirt.
Never use cleaners such as alcohol
or thinner.
Avoid placing vinyl object on top of
the unit (vinyl can stick to and
discolor the surface).
This instrument contains digital
circuitry and may cause interference
if placed too close to radio or
television receivers. If this occurs,
move the instrument further away
from the affected equipment.
Do not expose the unit to the following
conditions to avoid deformation,
discoloration, or more serious
damage.
Direct sunlight.
High temperature (near a heat
source, or in a car during the day
time).
Excessive humidity.
Panel Controls
- Front Panel
- Rear Panel
- Side Panel
Setup
- Connect the Pads and the Pedal
- Connect a MIDI device
- Connect a audio equipment
- Connect a CD player, etc.(Aux in jack)
- Connect Headphones
- Connect the Power supply jack
Functions
- Switch the power ON
- Set the main volume
- Select a drum kit
- Play with a Metronome
Create a User Drum Kit
- Set a drum voice
- Adjust the volume of Pad
- Save your drum kit voices
Voice list
Preset kit list
Song list
MIDI implementation chart
Play a Song
- Select a Song
- Listen to the Song
- Adjust the Song's volume
- Adjust the Song's tempo
- Tap tempo function
- Mute a Drum part
- Play with the Click voice
- Use the lighting guide function
Specifications
4
4
5
5
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
10
10
10
10
11
11
11
11
12
13
14
14
15
Contents
3
Volume knob
Control the volume of phone and line output.
Turn it clockwise to increase the volume
and anticlockwise to decrease it.
[ save ] button
Save current kit setting to a user kit.
[ start/stop ] button
Start or stop song playing.
[ kit ] button
Display the drum kit number.
[ voice / volume ] button
Display the voice number or volume value.
3-digit LED display
Display the parameters of current menu mode.
[ song / volume ] button
Display the song number or accompaniment
volume value.
[ drum off ] button and indicator
This button is used to turn on or turn off the
percussion of song.
Beat indicator
Beat of metronome or a song is playing
[ click ] button
Turn on or off the metronome.
[ + ] and [ - ] buttons
These buttons are used to change the setting
number of kit, voice, song and adjust the Pad
volume.
Pad select buttons and indicators
Select current pad and adjust the pad volume.
When you press them, the corresponding indicator
lights up.
[ tempo - / + ] and [ tap ] buttons
Change current tempo.
3
Panel Controls
4
Front Panel
3
Trigger input jacks
Connect with pads, cymbals, hi-hat control,
kick trigger.
Output jacks (R, L/mono)
Connect with the amplifier or audio system.
For monaural output use the L/mono jack.
MIDI out jack
Connect with external sound module.
Aux.in jack
Connect with external sound source.
Power supply jack ( DC in 9V)
Connect an AC adaptor to this jack.
Power switch
Turn the power on/off.
Phones jack
Connect with to a pair of stereo headphones to this jack.
(Connect the headphones will not mute the output jacks.)
5
Rear Panel
Side Panel
Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each
pad is connected to its corresponding Trigger input jack.
Note:
1. The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions
as an 'open hi-hat' when the pedal is stepped. When the pedal is released, it functions as a 'closed hi-hat' .
2. The valid striking area of a cymbal pad (ride, crash or hi-hat) is near the edge of the pad, which is different from
other pads.
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF
on the drum and all related device before making any connection.
Setup
6
Connect the Pads and the Pedals
This is for you want to use an external sound module or MIDI
sequencer.
Transmit MIDI Data
1. Use a MIDI cable to connect the MIDI OUT jack on the
drum module with the MIDI IN jack on the external MIDI device.
2. This drum will output all the MIDI codes generated by pads
hitting or pedal stepping via the MIDI output connector. But
clicking and the MIDI codes in songs are excluded.
1. When you want to listen to the voices with an amplifier,
connect amplifiers with the Output L/MONO and R jacks on
the rear panel. (For monaural playback, use the L/MONO jack;
for stereo playback, connect both L/MONO and R jacks.)
2. The volume is adjusted with the VOLUME knob.
1. The audio output of a CD player, or other audio source,
to connect with the AUX IN jack on the rear panel can be
mixed with the sound of the drum. This function is convenient
that lets you play along with a favourite song.
2. The volume of the external signal is adjusted with the
VOLUME knob.
Make sure the power is switched OFF and connect the power
adaptor with the DC IN jack on the rear panel.
Note:
1. To protect the speakers, amplifier and the drum module from
damage, rotate the volume knob to the minimum volume level
before switching the power ON.
2. Make sure the power is switched OFF when connecting drum
module with external devices.
Connect the Power supply jack
MIDI OUT
MIDI Data
MIDI IN
MIDI device
Amplifier Amplifier
An optional set of stereo headphones can be connected with
the PHONES jack located on the side of the drum module.
* Adjust the volume to a comfortable level.
Connect Headphones
Connect a MIDI device
Connect a audio equipment
Connect a CD player, etc.(Aux. In jack)
7
Functions
After confirming all connection have been completed, rotate the
volume knob to the left ( minimum volume level) before
switching the power on.
Set the power switch to "on" position to switch on the power.
Display shows the song's number and its indicator lights up.
The unit comes with 20 (001-020) preset drum kits and 10 user
kits (021-030). (Reference song list : page 14.)
1. Press [ kit ] button
The current kit number appears and the Kit indicator lights.
2. Press [ + ] or [ - ] buttons to select the drum kit number
(001 - 020) you want to use.
1. Press the [ click ] button to start the metronome. The beat
indicator is flashing and the click sound begins to play.
2. Press the [ tempo + ] or [ tempo - ] buttons to set the
metronome beat.
3. Press the [ click ] button again to stop the metronome.
Adjust the volume of the click sound
Hold down the [ click ] button and press the [ + ] or [ - ] buttons
to adjust the volume of the click sound, the metronome
automatically play.
*When playing the metronome:
The metronome stops immediately when holding down [ click ]
button, and pressing the [ + ] or [ - ] buttons on the click sound.
*Volume of the click sound will be reset to default once
power is on.
Song indicator
Kit indicator
Switch the power ON
Set the main volume
Select a drum kit
Play with a Metronome
8
Beat indicator
9
Play a Song
This drum module has a total of 50 preset songs.
Note: The preset song setting is 001 after you slide on power.
1. Press [ song / volume ] button.
The song indicator lights and the current song's number appears.
2. Press [ +] or [ - ] button to select one of the song and listen to it.
Song numbers 001 - 050 are preset songs.
(Reference song list : page 14.)
1. Press [ start/stop ] button and the beat indicator is flashing.
After the counting, the song will start playback from the
beginning.
2. The song will stop when it reaches the end.
You can stop the song during playback by pressing the
[ start/stop ] button
* The ASSIGN pad's indicator flashes at the first beat of each
measure
Note: The ASSIGN pad's indicator can be lighted off by pressing
both [hi-hat] and [kick] button at the same time.
Song indicator
1. Press the [ song / volume ] button to select the volume of
song. Display shows : " A XX".
(XX = level value, 00 to 31)
2. Press [ + ] or [ - ] button to adjust the volume of song
accompaniment.
1. Press the [ tempo + ] or [ tempo - ] button. D
[ tempo + ] or [ tempo - ] button to increase or
decrease the tempo. ( tempo value in the range or 30 to 280)
*
isplay shows
the current tempo value.
2. Press the
Holding down either a [ tempo +] or [ tempo - ] button to
change the setting in a high speed.
* Press [ tempo + ] and [ tempo - ] buttons at the same time
to reset the tempo to default value.
Note: About 2 seconds after you stop pressing the [Tempo]
button, display changes to show your selected song or kit
number instead of tempo value.
Select a song
Listen to the song
Adjust the song's volume
Adjust the song's tempo
Beat indicator
tempo/t ap
10
This function allows you to set the song's tempo by tapping
in tempo on a pad.
1. Press the [ tap ] button. Display shows the current tempo
value.
2. Tap on the pad in the tempo that you want to get.
Tap on the pad 4 times. The last two beats are only
detected and are set as your desired speed.
3. The song will be played with your desired tempo you set.
When the song is playing, you are not allowed to change
the tempo with this tempo function.
* Any pads can do the tap tempo function.
Tap tempo function
1. Press [ drum off ] button. The drum off indicator lights.
The drum mute function is active.
2. Press [ start/stop ] button to playback the song. The drum part
in the song will be muted.
3. To cancel the drum mute function, press [ drum off ] button
again. The drum off indicator light goes off.
* The drum mute function can be used during song playing.
1. Press the [ click ] button to start the metronome. It will be
played with tempo.
2. Press the [ click ] button again to stop the metronome.
Note: The click voice will not stop automatically once the song
finished until you press the [ click ] button.
The lighting guide function provides you a valuable lesson to
practice or learn the drum kit with playing the preset song.
1. Select the song number you want to practice.
2. Press [ drum off ] button.
3. Press [ start/stop ] button to start song play.
4. Strike the pad in accordance with the lighting of pad's
indicators or press the hi-hat pedal and kick the bass drum
pad exactly when their indicators light.
* During song playing, you can change the Tempo(speed),
or use the tap tempo function to set your desired tempo.
Drum off indicator
Mute a Drum part
Play with the Click voice
Use the lighting guide function
* Press the [ hi-hat control ] + [ kick ] buttons
to turn off all the pad's indicator. Press the
[ hi-hat control ] + [ kick ] buttons again to
turn on all the pad's indicator.
tempo/t ap
11
This unit allows you to adjust the volume of every voices in
the kit that let you control the individual level (volume) of
the pads or bass drum.
1. Press the [ voice / volume ] button to select the volume
level setting display shows : " L XX".
(XX = level value, 00 to 31)
The pad button indicator lights and display shows the
current volume level of lighting pad.
3. Press the [ PAD ] button or kit the percussion pad you
want to adjust.
4. Press the [ + / - ] to increase or decrease the
volume. While you are adjusting, hit the corresponding pad
and listen carefully the sound level until reaching the level
you want.
5. Repeat step 3 and 4 to adjust the volume of other pad
voices.
Once completing to your own drum kit, you have to save
them in the unit; otherwise your drum kit will be erased when
you turn off the unit.
1. Press [ save ] button.
The kit number 021 appears and is flashing.
2. Press [ +] or [ - ] button to set the kit number (021-030)
for saving your drum kit.
3. Press [ save ] button again. The flashing kit number stops.
Note: To cancel the save operation, press the [ voice ] button.
If there is a fault, the display will show "Err".
Volume level value
The unit comes with 215 high quality percussion sounds that you
can assign to any of the drum pad, 3 cymbals, hi-hat control and
bass drum. This way you can create your own drum kit that
consists of the voice you want. (Reference voice list : page 13.)
The kit number 021-030 is use for saving your own drum kit.
1. Press [ voice ] button.
The voice indicator lights and the display shows the voice
number of this pad.
2. Press [ pad ] button or hit the pad you want to set. The pad
indicator light and display shows the current voice number
of lighting pad.
3. Press [ + ] or [ - ] buttons to select the voice number you want
to assign.
4. Repeat step 2 and 3 for to set the voice for another pad or
bass drum
Create a User Drum Kit
Voice indicator
Adjust the volume of Pad
Save your drum kit voices
Set a drum voice
Pad indicator
Pad buttons
Drum Pad:
Voices:
Drum kits:
Song:
Controls:
Display:
Connections:
Power Supply:
4 drum pads , 3 cymbal pads ,1 hi-hat control pedal , 1 kick trigger
215 voices
20 preset kits, 10 user kits
50 preset songs
POWER SWITCH, START/STOP, SAVE,
SONG/VOLUME, DRUM OFF, CLICK, HI-HAT, CRASH, RIDE,
HI-HAT CONTROL, SNARE, TOM 1, TOM 2, TOM3, KICK,
VOLUME, + / -, TEMPO + / -, TAP
LED display
Output (R & L/MONO)
Aux in
AC adaptor ( 9V)
KIT, VOICE/VOLUME,
MIDI OUT
Hi-hat control
Hi-hat
Crash
Ride
Snare
Tom 1
Tom 2
Tom 3
Kick
Specifications
12
Voice List
13
No. Name
Acoustic Base Drum
001 BD Head
002 Real BD 1
003 Real BD 2
004 Real BD 6
005 BD Std 1
006 BD Std 2
007 Room BD 1
008 Room BD 2
009 Lo BD
010 Rock BD 1
011 Rock BD 3
012 Rock BD 4
013 BD-Var 3
014 BD-Var 5
015 Big Drum 1
016 Big Drum 2
Electronic Base Drum
017 BD-Analg
018 MrDance 1
019 MrDance 2
020 MrDance 5
021 Lo-BD 1
022 Lo-BD 2
023 Hard BD 3
Acoustic Snare Drum
024 SD-Std 1
025 SD-Std 2
026 SD-Std 3
027 SD-Std 4
028 SD-Std 5
029 SD-R 1
030 SD-R 2
031 SD-R 5
032 Snare 1
033 Snare 2
034 Snare 4
035 Snare 5
036 Snare 6
037 SD-Std 21
038 SD-Std 22
039 SD-Std 23
040 SD-Std 24
041 SD-Std 25
042 SD-Std 26
043 SD-Std 27
044 SD-Std 28
045 SD-Std 29
046 SnareDr 1
047 SnareDr 5
048 SnareDr 6
049 SnareDr 7
050 SnareDr 8
051 SidStik 1
052 SidStik 2
053 SnarTimb
054 RowDrum 1
055 RowDrum 2
056 RowDrum 3
Electronic Snare Drum
057 SD-Ana 2
058 SD-Ana 6
059 SD-Ana 7
060 SD-Ana 11
061 SD-Danc 5
062 SD-Danc 6
063 SD-Elec
064 Syn-SD 1
065 Syn-SD 7
066 Syn-SD 8
067 Syn-SD 11
068 Cool-SD 1
069 HD-SD 1
070 Brush 1
071 Brush 2
072 Brush 3
073 Brush 5
074 Brush 7
075 Brush 8
076 Brush 10
077 Brush 13
Acoustic Tom
078 Tom-Std 5
079 Tom-Std 3
080 Tom-Std 2
081 Tom-Std 1
082 Tom-Jaz M
083 Tom-Jaz F
084 Tom-Brs H
085 Tom-Brs M
086 Tom-Brs L
087 Tom-Brs F
088 Tom-BRK H
089 Tom-BRK M
090 Tom-BRK L
091 Tom-BRK F
092 Tom-Rom 6
093 Tom-Rom 5
094 Tom-Rom 4
095 Tom-Rom 3
096 Tom-Rom 2
097 Tom-Rom 1
098 Tom-Rm 2 L
099 Tom-Rm 2 F
Electronic Tom
100 TomH-A
101 Tom-A 5
102 Tom-A 4
103 Tom-A 3
104 Tom-A 2
105 Tom-A 1
106 Tom-T 1 M
107 Tom-T 3 L
108 Tom-T 3 F
109 Tom-El 4
110 Tom-El 3
111 Tom-El 2
112 Tom-El 1
Cymbal
113 CrashStd
114 CrashBrt
115 CrashSt 2
116 SftCrash
117 CrashSt 3
118 CrashSht
119 CrshThin
120 CrashRev
121 CrashRol
122 CrashSt 4
123 RideBel 1
124 RK Ride 2
125 RideBStd
126 Splash C 1
127 Cymbel 2
128 Cymbel 3
129 BigGong 1
130 BigGong 2
131 B.Cymbl 1
132 B.Cymbl 2
133 S.Cymbl 2
134 S.Cymb 2 M
135 SmalGong
Hi-Hat
136 H.H Cls 1
137 H.H Cls 3
138 H.H Cls 4
139 H.H Opn 1
140 H.HCNor 1
141 RK HHcls
142 H.H Opn 3
143 Open HH 2
144 Open HH 3
145 Open HH 4
146 RK HHOpn
147 Open HH 7
148 HH pedl 1
149 HH pedl 2
150 Ana Hh 1
Percussion
151 Agogo-1
152 Agogo-2
153 Bell Tre
154 Bongo Hi
155 Bongo Lo
156 Cabasa 1
157 Cabasa 2
158 Castanet
159 ClapA
160 Clavis 1
161 Clavis 2
162 Conga-Hi
163 Conga-M 1
164 Conga-M 2
165 Conga-3
166 Conga-4
167 Conga-5
168 CowBell 1
169 CowBell 2
170 Cuica H
171 Cuica L
172 Fsnap
173 Guiro 1
174 Guiro 2
175 HiQ
176 JingBell
177 Maracas 1
178 Maracas 2
179 MetroBel
180 MetroClk
181 Scrach
182 Shake
183 Surdo 1
184 Surdo 2
185 Tabla 1
186 Tabla 2
187 Tabla 3
188 Tabla 4
189 TalkD
190 TalknDrD
191 TalknDrU
192 TalknDrV
193 Tambouri
194 TimbleH
195 TimbleL
196 TimblePH
197 TimblePL
198 Triangle
199 TriagMut
200 VibrSlap
201 Whistal
202 XfadeTri
203 Smallwod
204 BoardDr 1
205 BoardDr 2
206 LotusBrd
207 BanbuBrd
208 SouthBan
209 B.WdFish
210 S.WdFis 1
211 S.WdFis 2
212 S.WdFis 3
213 S.WdFis 4
214 ImpacBel
215 ImpaBel M
Drum Kit List
Song List
No. Name
001 Standard 1
002 Standard 2
003 Dance 1
004 Jazz Latin
005 Room 1
006 Electric
007 Brush
008 Room Stick
009 Latin 1
010 Latin 2
No. Name
011 Jazz
012 Brush 2
013 Dance Stick
014 Orchestra
015 Drum & Bass
016 House
017 Rhythm & Blues
018 Ungle
019 China LuoGu
020 Oriental 1
14
No. Name Beat No. Name Beat
001 Guitar 4/4 026 Reggae 4/4
002 Accordion Fusion 4/4 027 Shuffle 1 4/4
003 Folk Pop 4/4 028 Rhythm & Blues 3 4/4
004 Rock 4/4 029 Rock 'N' Roll 1 4/4
005 Blues 4/4 030 8 Beat 4 4/4
006 Newage 4/4 031 8 Beat 2 4/4
007 Reggae Funk 4/4 032 16 Beat 4/4
008 Drum & Bass 4/4 033 March 4/4
009 Pop 8 Beat 4/4 034 Latin 6 4/4
010 Dance 4/4 035 Funk 3 4/4
011 Drk -2 4/4 036 Fusion 2 4/4
012 Pop 3 4/4 037 Rock 'N' Roll 2 4/4
013 Pop 5 4/4 038 Hard Rock 3 4/4
014 Jazz 1 4/4 039 Rock Pop 2 4/4
015 Rhythm & Blues 4 6/8 040 Funk 1 4/4
016 Ballad 1 4/4 041 Funk 4 4/4
017 Ballad 2 4/4 042 Jazz 3 6/8
018 Ballad 4 4/4 043 Dance 1 4/4
019 Ballad 5 4/4 044 Dance 2 4/4
020 Ballad 6 4/4 045 Mambo 4/4
021 Waltz 3/4 046 Rhythm & Blues 1 4/4
022 Slow Rock 6/8,9/8 047 Rhythm & Blues 2 4/4
023 Rock Pop 4 4/4 048 Ballad 3 4/4
024 Latin 4 4/4 049 Jing Opera 4/4
025 Latin 5 4/4 050 Chinese Rhythm 2/4
MIDI Implementation Chart
Function... Transmitted Remarks
Basic Default 10 ch
Channel Changed X
Default X
Mode Messages X
Altered **************
Note 0 - 127
Number: True voice **************
Velocity Note on O 9n H, V = 1 - 127
Note off X (9 nH. V= 0)
After Key's X
Touch Channel's X
Pitch Bend X
Control 0 X Bank Select
Change 1 X Modulation
5 X Portamento Time
6 X Data Entry
7 X Volume
10 X Pan
11 X Expression
64 X Sustain Pedal
65 X Portamento ON/OFF
66 X Sostenuto Pedal
67 X Soft Pedal
80 X Reverb Program
81 X Chorus Program
91 X Reverb Level
93 X Chorus Level
120 X All Sound OFF
121 X Reset All Controller
123 X All Notes OFF
Program X
Change: True # X
System Exclusive X
System : Song Position X
Common : Song Select X
: Tune X
System : Clock X
Real Time : Commands X
Aux : Local ON/OFF X
: All Notes OFF X
Messages : Active Sense X
: Reset X
O : YES
X : NO
15
DD502W_G01
Loading...