Page 1
45W PWM Output LED Driver
M M
SELV
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
(for IDLV-45-12,24,48 only)
IDLV-45 series
E
S
&
■ Features
Constant Voltage PWM style output
with frequency 1KHz
Plastic housing with class II design
Built-in active PFC function
No load power consumption<0.5W(Blank-Type)
■ Applications
LED strip lighting
Indoor LED lighting
LED decorative lighting
LED architecture lighting
Function options: 2 in 1 dimming (dim-to-off);
Auxiliary DC output
3 years warranty
■ Description
IDLV-45 series is a 45W AC/DC LED driver featuring the constant voltage mode PWM style output
design. IDLV-45 operates from 90 295VAC and offers models with different rated voltage ranging～
between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design, the entire
series is able to operate for -20 ~+85 case temperature under free air convection. IDLV-45 is℃℃
equipped with various function options, such as dimming methodologies, so as to provide the design
flexibility for LED lighting system.
■ Model Encoding
IDLV
Type
Blank
A
45
-
2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming
A
-
12
Rated output voltage(12/24/36/48/60V)
Function options
Rated wattage
Series name
Function Note
and Auxiliary DC output
In Stock
In Stock
File Name:IDLV-45-SPEC 2018-01-10
Page 2
SPECIFICATION
MODEL
DC VO LTAGE
RATED CURRENT
RATED POWER
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY &
EMC
NOTE
DIMMING RANGE
VOLTAGE TOLERANCE
PWM FREQUENCY (Typ.)
SETUP TIME
AUXILIARY DC OUTPUT
VO LTAGE RA NGE Note.2
FREQUENCY RANGE
POWER FACTOR (Typ.)
TOTALHARMONIC DISTORTION
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
LEAKAGE CURRENT
NO LOAD POWER CONSUMPTION
SHORT CIRCUIT
OVER CURRENT
WORKING TEMP.
MAX. CASE TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSIONOTHERS
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature.℃
2. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.
4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be
affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
45W PWM Output LED Driver
IDLV-45 -12
12V
3.0A
36W
0~100%
±10%
1KHz( 20%)±
Note.3
500ms / 230VAC 1200ms/115VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
Note.4
90 ~ 295VAC 127 ~ 417VDC
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load 60%/115VAC,230VAC; @load 75%/277VAC)≧≧
(Please refer to “TOTALHARMONIC DISTORTION” section)
84%
0.6A / 115VAC 0.4A / 230VAC 0.3A / 277VAC
COLD START 30A(twidth= s measured at 50% Ipeak) at 230VAC150μ;Per NEMA 410
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
<0.5W for Blank-Type, <1.2W forA-Type
Shut down O/P voltage, overe power on to c ry-re
105 ~ 115%
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Tcase=-20 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃
Tcase=+85℃
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 40 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750,CSA C22.2 NO.250.13-12; EN/AS/NZS 61347-1 & EN/AS/NZS 61347-2-13 independent, EN62384,
GB19510.1, GB19510.14, BIS IS15885(for IDLV-45-12,24,48 only), EAC TP TC 004 approved
I/P-O/P:3.75KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
Compliance to EN55015, EN61000-3-2 Class C ( ) ; EN61000-3-3,GB17743,GB17625.1, EAC TP TC 020@load 60%≧
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level( ), EAC TP TC 020surge immunity:Line-Line:1KV
386.59Khrs min. MIL-HDBK-217F (25 )℃
120*75*25mm (L*W*H)
0.22Kg;54pcs/13Kg/ 0.93CUFT
IDLV-45 -24
24V
1.88A
45.12W
86%
IDLV-45 -36
36V
1.25A
45W
88%
IDLV-45 series
IDLV-45 -48 IDLV-45 -60
48V 60V
0.94A
45.12W
88% 90%
0.75A
45W
File Name:IDLV-45-SPEC 2018-01-10
Page 3
45W PWM Output LED Driver
DIMMING OPERATION
※ Dimming principle for PWM style output
Dimming is achieved by varying the duty cycle of the output current.
ACL
ACL
ACN
ACN
DIM+
DIMVo+
Vo-
IDLV-45 series
TB1
TB2
Output DC current
Io=0A
※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC
+
Vo+
-
Vo-
DIM+
DIM-
“DO NOT connect "DIM- ”to Vo-
ON
T
ON
T
+
Additive Voltage
-
OFF
T
Duty cycle(%) = ×100%
ON
T
Output PWM frequency : 1KHz( 20%)±
100%
90%
80%
+
-
70%
60%
50%
40%
30%
20%
Duty cycle of output current (%)
10%
0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input:Additive voltage
Duty cycle of output current (%)
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):
+
Vo+
-
Vo-
DIM+
Additive PWM signal
DIM-
“DO NOT connect "DIM- ”to Vo-
+
-
Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< out<8%.I
2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
File Name:IDLV-45-SPEC 2018-01-10
Page 4
5.00%
7.00%
9.00%
11.00%
13.00%
15.00%
17.00%
19.00%
50% 60% 70% 80% 90% 100%
277(45W)
230(45W)
115(36W)
85%
86%
87%
88%
89%
90%
91%
50% 60% 70% 80% 90% 100%
277(45W)
230(45W)
115(36W)
0.75
0.80
0.85
0.90
0.95
1.00
50% 60% 70% 80% 90% 100%
277(45W)
230(45W)
115(36W)
45W PWM Output LED Driver
OUTPUT LOAD vs TEMPERATURE
IDLV-45 series
100
80
70
60
40
LOAD (%)
20
-20 -10 0 10 20 30 40
AMBIENT TEMPERATURE,Ta ( )℃
STATIC CHARACTERISTIC
100
LOAD (%)
90
80
70
60
50
40
for 12V model
for others
(HORIZONTAL)
100
80
70
60
40
LOAD (%)
20
-20-100 1530456085
Tcase ( )℃
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
PF
(HORIZONTAL)
90 295
100
135 180 200
INPUT VOLTAGE (V)
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
※ 60V Model,Tcase at 75℃
THD(%)
LOAD
230
LOAD
EFFICIENCY vs LOAD
IDLV-45 series possess superior working efficiency that up to 90% can
be reached in field applications.
※ 60V Model,Tcase at 75℃
EFFICIENCY(%)
LOAD
File Name:IDLV-45-SPEC 2018-01-10
Page 5
45W PWM Output LED Driver
BLOCK DIAGRAM
IDLV-45 series
fosc : 70~150KHz
I/P
EMI FILTER
&
RECTIFIERS
MECHANICAL SPECIFICATION
※ Blank-Type
75
6.5
120
O.L.P.
POWER
SWITCHING
PWM&PFC
CONTROL
6.5
RECTIFIERS
RECTIFIERS
&
FILTER
CURRENT
LIMIT
DETECTION
CIRCUIT
AUX+(for A-Type)
AUX-(for A-Type)
Vo+
Vo-
DIM+
DIM-
Case No.IDLC-45A Unit:mm
tc
: Max. Case Temperature
1
2
TB1
6.5
3
4
1
2
TB2
3
4
30
tc
30
6.5
3
25
Terminal Pin No. Assignment(TB1)
Pin N o.
Assignment
1
2
3
4
ACL
ACL
ACN
ACN
Terminal Pin No. Assignment(TB2)
Pin No.
Assignment
1
2
3
4
DIM+
DIM-
Vo+
Vo-
File Name:IDLV-45-SPEC 2018-01-10
Page 6
※ A-Type
45W PWM Output LED Driver
IDLV-45 series
75
6.5
6.5
3
25
Terminal Pin No. Assignment(TB1)
Pin N o.
Assignment
1
2
3
4
ACL
ACL
ACN
ACN
120
6.5
6.5
tc
: Max. Case Temperature
1
2
TB1
3
4
1
2
3
TB2
4
5
6
30
tc
30
Terminal Pin No. Assignment(TB2)
Pin No. Pin No.
Assignment Assignment
1
2
3
DIM+ VoDIM-
Vo+
4
5
6
AUX+
AUX-
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:IDLV-45-SPEC 2018-01-10
Loading...