MEANWELL DDR-60G-24 Datasheet

60W DIN Rail Type DC-DC Converter

DDR-60 series

■ Feature ■ Applications
Width only 52.5mm (3SU)
4:1 ultra wide input range
-40~+85 wide working temperature℃
No minimum load required
DC output adjustable ( 10%±）
Cooling by free air convection

Industrial control system
Semi-conductor fabrication equipment
Factory automation
Electro-mechanical
Wireless network

Telecom or datacom system
Can be installed on DIN rail TS-35/7.5 or 15
Protections: Short circuit / Overload / Over voltage /

Input reverse polarity /
Input under voltage protection

4KVdc I/O isolation(Reinforced isolation)
3 years warranty

■ Description

DDR-60 series is a 60W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation,

ultra slim width (52.5mm), 4:1 ultra wide input voltage, -40~+85 wide operating temperature, 4KVdc I/O isolation, ℃

adjustable output voltage (± 10%) and full protective functions...etc.

This series has two input options: 9~36V /18~75V and various output options: 5V / 12V / 15V / 24V a nd can

be used for industrial control, security control, communication system and other fields. Suitable applications are

DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable...etc.

■ Model Encoding

-24DDR - 60 G

Output voltage(5/12/15/24Vdc)
Input voltage (G 9~36Vdc, L:18~75Vdc):

Rated wattage
Series name

File Name:DDR-60-SPEC 2018-02-02

SPECIFICATION

MODEL

DC VO LTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY &
EMC

(Note 5)

NOTE

RIPPLE & NOISE (max.)

VOLTAGE ADJ. RANGE

VOLTAGE TOLERANCE Note.3

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

EXTERNAL CAPACITANCE
LOAD (Max.)

VOLTAGE RANGE

EFFICIENCY (Typ.)

DC CURRENT (Typ.)
INRUSH CURRENT (Typ.)

OVERLOAD

OVER VOLTAGE

REVERSE POLARITY

UNDER VOLTAGE LOCKOUT

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

OPERATINGALTITUDE

SAFETY STANDARDS
WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY

MTBF

DIMENSIONOTHERS

PACKING

1. All parameters NOT specially mentioned are measured at normal input (G:24Vdc, L:48Vdc), rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 f & 47 f parallel capacitor.μμ

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the derating curve for more details.

5.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC
directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft)℃℃

60W DIN Rail Type DC-DC Converter

DDR-60G-5

5V

10.8A

0 ~ 10.8A

54W

60mVp-p

Note.2

4.5 ~ 5.5V

±2.0%
±0.5%
±1.5%

120ms, 85ms at full load

G-type: 5ms@24Vdc input

6800 F

μ

Note.4

9 ~ 36Vdc

87.5%

3A /24Vdc 1.5A /48Vdc

20A /24Vdc

105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed

5.75 ~ 7V

Protection type : Shut down o/p voltage, re-power on to recover

By internal MOSFET, no damage, recovers automatically after fault condition removed

24Vin (G-type):Power V , FF VON 9 O 8.5≥≤

48Vin (L-type):Power V , FF VON 18 O 17≥≤

-40 ~ +85 (Refer to "Derating Curve")℃

5 ~ 95% RH non-condensing

-40 ~ +85 , 5 ~ 95% RH non-condensing℃
±℃℃0.03%/ (0 ~60 )

Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

2000 meters

IEC 62368-1 (LVD) approved, Design refer to UL508

I/P-O/P:4KVdc
I/P-O/P>100M Ohms / 500Vdc / 25 / 70% RH℃

Parameter

Conducted

Radiated

Voltage Flicker

EN55024 , EN61000-6-2(EN50082-2)

Parameter

ESD

Radiated

EFT / Burst

Surge

Conducted

Magnetic Field

611K hrs min. MIL-HDBK-217F (25 )℃

52.5*90*54.5mm (W*H*D)

216g; 60pcs/14Kg/0.97CUFT

DDR-60G-12

12V

5A

0 ~ 5A

60W

75mVp-p

9 ~ 13.2V

±2.0%
±0.5%
±0.5%

4700 F

μ

91%

13.8 ~ 16.2V

DDR-60G-15

15V

4A

0 ~ 4A

60W

75mVp-p

13.5 ~ 16.5V

±2.0%
±0.5%
±0.5%

3300 F

91%

17.25 ~ 20.25V

μ

DDR-60G-24

24V

2.5A

0 ~ 2.5A

60W

100mVp-p

21.6 ~ 28V

±2.0%
±0.5%
±0.5%

2200 F

μ

91%

28.8 ~ 34V

Standard

EN55032

EN55032

EN61000-3-3

Standard

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

EN61000-4-8

DDR-60 series

DDR-60L-5

5V

12A

0 ~ 12A

60W

60mVp-p

4.5 ~ 5.5V

±2.0%
±0.5%
±1.5%

L-type: 10ms@48Vdc input

6800 F

μ

18 ~ 75Vdc

87.5%

20A /48Vdc

5.75 ~ 7V

DDR-60L-12

12V

5A

0 ~ 5A

60W

75mVp-p

9 ~ 13.2V

±2.0%
±0.5%
±0.5%

4700 F

μ

91%

13.8 ~ 16.2V

Test Level / Note

Class A

Class A for 1m I/O cable , Class B for 30cm I/O cable

-----

Test Level / Note

Level 3, 8KV air ; Level 3, 6KV contact; criteria A

Level 3, 10V/m ; criteria A

Level 3, 2KV ; criteria A

Level 3, 1KV/Line-Line ; criteria A

Level 3, 10V ; criteria A

Level 4, 30A/m ; criteria A

DDR-60L-15

15V

4A

0 ~ 4A

60W

75mVp-p

13.5 ~ 16.5V

±2.0%
±0.5%
±0.5%

3300 F

μ

92%

17.25 ~ 20.25V

DDR-60L-24

24V

2.5A

0 ~ 2.5A

60W

100mVp-p

21.6 ~ 28V

±2.0%
±0.5%

±0.5%

2200 F

μ

92%

28.8 ~ 34V

.

File Name:DDR-60-SPEC 2018-02-02

60W DIN Rail Type DC-DC Converter

DDR-60 series

Block Diagram

I/P

Derating Curve

DDR-60G-5

100

80

75

60

50

35

LOAD (%)

REVERSE
POLARITY

UNDER
VO LTAGE
LOCKOUT

FILTER

＞18Vdc input

≤18Vdc input

EMI

O.L.P.

POWER

SWITCHING

PWM

CONTROL

RECTIFIERS

&

FILTER

DETECTION

CIRCUIT

O.V.P.

DDR-60G-12/15/24

100

85

70

55

35

LOAD (%)

fosc : 130KHz

+Vo

-Vo

＞18Vdc input

≤18Vdc input

-40 0 10 20

AMBIENT TEMPERATURE ( )℃

DDR-60L-5

100

90

80

70

60

50

35

＞36Vdc input

≤36Vdc input

LOAD (%)

-40 0 10 20

AMBIENT TEMPERATURE ( )℃

Output derating VS input voltage

100

90
85

75

60

40

DDR-60L-12/15/24
DDR-60L-5
DDR-60G-12/15/24
DDR-60G-5

30

40 50 60 70

30

40 50 60 70

80-30 -20 -10

85

(VERTICAL)

80-30 -20 -10

85

(VERTICAL)

-30

-40 0 10 20

AMBIENT TEMPERATURE ( )℃

DDR-60L-12/15/24

100

70

50

35

LOAD (%)

-30

-40 0 10 20

AMBIENT TEMPERATURE ( )℃

30

40 50 60 70 80-20 -10 85

30

40 50 60 70 80-20 -10 85

(VERTICAL)

(VERTICAL)

LOAD (%)

20

G-type:

918 3024 36

L-type:

12

18 36 6048 75

24

INPUT VOLTAGE

File Name:DDR-60-SPEC 2018-02-02

60W DIN Rail Type DC-DC Converter

Mechanical SpecificationMechanical Specification

DDR-60 series

58.4

Power LED

52.5

12534

6

5.54

90

6.3 65

45.15

35

ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15

Pin No.

1,2

3,4

5

6

Assignment

DC output -Vo

DC output

DC input

DC input

+Vo

+Vin

-Vin

Installation Manual

Please refer to : http://www.meanwell.com/manual.html

File Name:DDR-60-SPEC 2018-02-02