Meade BARLOW Instruction Manual

Operating Instructions Addendum

Barlow Installation

For use with Meade NG/NGC Series Telescopes

Introduction

Introduction

Congratulations! Your NGC/NG telescope was shipped with
an upgraded Barlow Lens.

Assembly

• Slide the Barlow lens into the focuser drawtube and
tighten the drawtube thumbscrew to a firm feel.

• Slide the diagonal mirror into the Barlow and tighten the
Barlow thumbscrew to a firm feel.

Slide the eyepiece into the diagonal and tighten the
diagonal thumbscrew to a firm feel.

Fig. D for the completed assembly.

See

If you have a question concerning use of the Meade

Telescopes,

Department at [phone], or fax to [phone].
Customer Service hours are 7:00 AM to 6:00 PM, Pacific
Time, Monday through Friday.

call the Meade Instruments Customer Service

NG/NGC

Eyepiece

Drawtube and thumbscrew

Barlow and

Barlow and thumbscrew

Fig. D: The drawtube, Barlow lens, diagonal mirror and
eyepiece.

thumbscrew

Part no. 14-0600-00 addendum 2 Ver. 07-04