3.2. PHASE 1 – REMOVING EDGE-COVER PROFILE FORMA PURO ............................................................7
3.3. PHASE 2 – INSTALLATION OF PASSE-PARTOUT CLADDING FPURO65/FPURO75/FPURO95/FPURO115..7
3.4. PHASE 3 – WALL FOR RECESSED INSTALLATION..............................................................................9
3.5. TECHNICAL TERMS GLOSSARY OF THE PICTURES ..........................................................................15
Index Technical service – all rights reserved by mcz spa
Reproduction prohibited
INSTALLATION AND USE MANUAL
PASSE-PARTOUT LINEA FORMA PURO
INTRODUCTION
Dear Customer,
thank you for choosing a MCZ product and in particular the Passe-
partout (Forma Puro65, Forma Puro75, Forma Puro95, Forma Puro B95,
Forma Puro115 versions) claddings Forma Puro (FP) range.
We are sure that, by using it, you will appreciate the quality of an
accurately designed and tested product. Our goal is to combine
technology with easy of use and, above all, safety.
For optimal functioning of the Passe-partout claddings and to
fully enjoy the heat and sense of well being that will spread
throughout your home, we suggest that you carefully read this
use and maintenance manual before using the product for the
first time; please contact your dealer should you require
assistance in resolving any doubts or problems.
Congratulations on your choice and remember, the fireplace stove
MUST NEVER be used by children who should always be kept at a
safe distance!
Introduction
page
2
Revisions to the publication
In order to improve the product, the Manufacturer reserves the right to
modify and update this publication without prior notice.
Reproduction, even partial, of this manual without the Manufacturer's
authorisation is prohibited.
Manual preservation.
•Please take care of this manual and keep it in a place that can be
quickly and easily reached.
•If this manual should be lost or destroyed, or if it is in poor
condition, request a copy from your dealer or directly from the
manufacturer, providing product identification data.
Introduction Technical service – all rights reserved by mcz spa
Reproduction prohibited
INSTALLATION AND USE MANUAL
PASSE-PARTOUT LINEA FORMA PURO
1. WARNINGS AND WARRANTY CONDITIONS
1.1. SAFETY WARNINGS
•Check the conditions of the surface that will support the
weight of the stove. If it is made of flammable material
(such as wood, carpet, or plastic) provide suitable
insulation.
•The user is fully liable for improper product use,
releasing MCZ from any civil or penal liabilities.
•Any tampering with the fireplace stove, or use of nonoriginal spare parts, may be hazardous to the user and
releases MCZ from any civil or penal liability.
•Incorrect installation or poor maintenance (not
compliant with the provisions of this manual) may cause
damages to persons, animals or property. MCZ is not
civilly or criminally liable in these cases.
Chapter 1
page
3
1.2. GUARANTEE CONDITIONS
MCZ guarantees the product, with the exception for the elements
subject to normal wear listed below, for two years from the date of
purchase that is proven by a document that indicates the dealer's name
and date of sale, if the completed warranty certificate was returned
within 8 days and if the product was installed and inspected by a
specialised installation technician and according to the detailed
instructions indicated in the instruction manual supplied with the
product.
The warranty includes the free replacement or repair of parts
recognised as factory defective.
1.2.1. Exclusions
The guarantee does not cover any part that may be defective
due to negligence or careless use, incorrect maintenance,
installation non compliant with that specified by MCZ.
MCZ refuses to accept any responsibility for any damage which may be
caused, directly or indirectly, by persons, animals or things as a result
of the failure to observe all the provisions set forth in the instruction
booklet, especially those concerning warnings on the subject of
installation, use and maintenance of the appliance.
In the event of product inefficiency, please contact your dealer and/or
area importer.
Damages caused by transport and handling are not covered by the
guarantee.
Exclusively refer to the supplied manual for product installation and
use.
The guarantee will be invalidated in the event of damage caused by
tampering with the appliance, atmospheric agents, natural disasters,
Chapter 1 Technical service – all rights reserved by mcz spa
Reproduction prohibited
INSTALLATION AND USE MANUAL
PASSE-PARTOUT LINEA FORMA PURO
electrical discharges, fire and lack of, or incorrect, maintenance in
terms of the manufacturer's instructions.
REQUEST FOR SERVICE
Requests for service must be addressed to the dealer
who shall forward the request to the MCZ technical
assistance service.
MCZ is not liable in the event the product and any
other accessory is improperly used or modified
without authorisation.
Only original MCZ spare parts must be used for all
replacements.
Chapter 1
page
4
Chapter 1 Technical service – all rights reserved by mcz spa
Reproduction prohibited
INSTALLATION AND USE MANUAL
PASSE-PARTOUT LINEA FORMA PURO
Chapter 2
page
5
2. PASSE-PARTOUT CLADDING WITH FIREPLACE STOVES
FPURO65/FPURO75/FPURO95/FPURO115
The Passe-partout cladding model is a recessed cladding, i.e. the fireplace stove is recessed into the wall.
Therefore it is necessary to build a counter-wall that protrudes from the perimeter wall. The depth of the wall to
be constructed is at your discretion provided you comply with all safety distances for the fireplace stove. For this
purpose please refer to the
Manual for Installation and Use
Passe-Partout cladding is quick and easy to assemble. It is attached directly to the fireplace stove Forma Puro. It
does not require any work during installation except for the wall for recessed installation of the unit.
493
ARBITRARIA
MURO PERIMATRALEMURO PERIMATRALE
50
PARETE
CARTONGESSO
1133
PASSE-PARTOUT
PASSE-PARTOUT CLADDING FORMA PURO115
W=1133 MM H=493 MM
PASSE-PARTOUT CLADDING FORMA PURO95
W= 913 MM H=493 MM
PASSE-PARTOUT CLADDING FORMA PURO75
W=703 MM H=635 MM
PASSE-PARTOUT CLADDING FORMA PURO65
W=623 MM H=597 MM
of Forma Puro (FP65, FP75, FP95, FP115). The
Chapter 2 Technical service – all rights reserved by mcz spa
Reproduction prohibited
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.