MCZ Matisse User Manual

INSTALLATION AND USE MANUAL
MATISSE
Index
page
1
INTRODUCTION....................................................................................................................................2
1. WARNINGS AND WARRANTY CONDITIONS .....................................................................................3
1.1. SAFETY WARNINGS........................................................................................................................3
1.2. GUARANTEE CONDITIONS ..............................................................................................................3
1.2.1. Exclusions................................................................................................................................3
2. MATISSE CLADDING WITH FIREPLACE STOVE FORMA PURO75......................................................5
3. ASSEMBLY OF MATISSE CLADDING..................................................................................................6
3.1. TABLE OF SCREWS.........................................................................................................................6
3.2. PREPARATION OF WALL..................................................................................................................6
3.3. ASSEMBLY OF STRUCTURE FRAME ..................................................................................................7
3.4. PANEL INSTALLATION.....................................................................................................................8
3.5. FASTENING PLASTERBOARD ...........................................................................................................9
3.6. ASSEMBLY OF FRAMES..................................................................................................................10
3.7. PLINTH ASSEMBLY........................................................................................................................11
3.7.1. Assembly of rollers.................................................................................................................11
3.7.2. Plinth assembly......................................................................................................................12
3.8. TECHNICAL TERMS GLOSSARY OF THE PICTURES ..........................................................................14
Index
Technical service – all rights reserved by mcz spa Reproduction prohibited
INSTALLATION AND USE MANUAL
MATISSE
INTRODUCTION
Dear Customer, thank you for choosing a MCZ product and in particular the Matisse
cladding Forma Puro75. We are sure that, by using it, you will appreciate the quality of an
accurately designed and tested product. Our goal is to combine technology with easy of use and, above all, safety.
For optimal functioning of the Matisse cladding and to fully enjoy the heat and sense of well being that will spread throughout your home, we suggest that you carefully read this use and maintenance manual before using the product for the first time; please contact your dealer should you require assistance in resolving any doubts or problems.
Congratulations on your choice and remember, the fireplace stove MUST NEVER be used by children who should always be kept at a safe distance!
Introduction
page
2
Revisions to the publication
In order to improve the product, the Manufacturer reserves the right to modify and update this publication without prior notice.
Reproduction, even partial, of this manual without the Manufacturer's authorisation is prohibited.
Manual preservation.
Please take care of this manual and keep it in a place that can be quickly and easily reached.
If this manual should be lost or destroyed, or if it is in poor condition, request a copy from your dealer or directly from the manufacturer, providing product identification data.
Introduction
Technical service – all rights reserved by mcz spa Reproduction prohibited
INSTALLATION AND USE MANUAL
MATISSE
1. WARNINGS AND WARRANTY CONDITIONS
1.1. SAFETY WARNINGS
Check the conditions of the surface that will support the weight of the stove. If it is made of flammable material (such as wood, carpet, or plastic) provide suitable insulation.
The user is fully liable for improper product use, releasing MCZ from any civil or penal liabilities.
Any tampering with the fireplace stove, or use of non­original spare parts, may be hazardous to the user and releases MCZ from any civil or penal liability.
Incorrect installation or poor maintenance (not compliant with the provisions of this manual) may cause damages to persons, animals or property. MCZ is not civilly or criminally liable in these cases..
Chapter 1
page
3
1.2. GUARANTEE CONDITIONS
MCZ guarantees the product, with the exception for the elements subject to normal wear listed below, for two years from the date of
purchase that is proven by a document that indicates the dealer's name and date of sale, if the completed warranty certificate was returned within 8 days and if the product was installed and inspected by a specialised installation technician and according to the detailed instructions indicated in the instruction manual supplied with the product.
The warranty includes the free replacement or repair of parts
recognised as factory defective.
1.2.1. Exclusions
The guarantee does not cover any part that may be defective due to negligence or careless use, incorrect maintenance, installation non compliant with that specified by MCZ.
MCZ refuses to accept any responsibility for any damage which may be caused, directly or indirectly, by persons, animals or things as a result of the failure to observe all the provisions set forth in the instruction booklet, especially those concerning warnings on the subject of installation, use and maintenance of the appliance.
In the event of product inefficiency, please contact your dealer and/or area importer.
Damages caused by transport and handling are not covered by the guarantee.
Exclusively refer to the supplied manual for product installation and use.
The guarantee will be invalidated in the event of damage caused by tampering with the appliance, atmospheric agents, natural disasters,
Chapter 3
Technical service – all rights reserved by mcz spa Reproduction prohibited
INSTALLATION AND USE MANUAL
MATISSE
electrical discharges, fire and lack of, or incorrect, maintenance in terms of the manufacturer's instructions.
REQUEST FOR SERVICE Requests for service must be addressed to the dealer
who shall forward the request to the MCZ technical assistance service.
MCZ is not liable in the event the product and any other accessory is improperly used or modified without authorisation.
Only original MCZ spare parts must be used for all replacements.
THE SURFACE TREATMENT IS DONE ONLY BY HAND. THEREFORE THE SLIGHT VARIATIONS IN SHADE AND WORKING ARE CHARACTERISTICS THAT HIGHLIGHT AND ENHANCE AN ARTISAN PRODUCT, AND ARE NOT TO BE CONSIDERED AS DEFECTS.
TO CLEAN THE TREATED SURFACE, IT IS ADVISABLE TO USE NEUTRAL DETERGENTS DILUTED IN WATER, A SOFT SPONGE OR A COTTON CLOTH. DRY IMMEDIATELY AFTER WASHING.
Chapter 1
page
4
Chapter 3
Technical service – all rights reserved by mcz spa Reproduction prohibited
INSTALLATION AND USE MANUAL
MATISSE
Chapter 2
2. MATISSE CLADDING WITH FIREPLACE STOVE FORMA PURO75
1350
pag.
5
1421
80 692 497 80
126 625 590 80
1274
Chapter 2
52 570
Technical service – all rights reserved by mcz spa Reproduction prohibited
INSTALLATION AND USE MANUAL
MATISSE
3. ASSEMBLY OF MATISSE CLADDING
3.1. TABLE OF SCREWS
Chapter 3
page
6
VITE M5x10 DIN 6921
VITE AUTOPERFORANTE 4.2x16
VITE M4x10 UNI 7689
DADO FLANGIATO M5
RULLINO AGGANCIO
N°6
N°19
N°4
N°6
N°5
3.2. PREPARATION OF WALL
20
VITE M5x8 ISO 7380
VITE M3x16 UNI 5931
VITE CARTONGESSO 3.9x35
N°2
N°2
N°10
1255
453
1350
29
You will need to make an opening in the wall of 1350x1255mm and position the fireplace stove at a distance on the right from the edge of the wall and the Forma Puro75 of 453mm, a height from the floor to the fire bed of 136mm and at the rear from the wall to the lower part of the unit of 29mm.
Chapter 3
Technical service – all rights reserved by mcz spa
136
INSTALLATION AND USE MANUAL
3.3. ASSEMBLY OF STRUCTURE FRAME
MATISSE
Chapter 3
page
7
In the first phase, you will need to assemble the structural frame as in the drawing
Chapter 3
Technical service – all rights reserved by mcz spa
3.4. PANEL INSTALLATION
INSTALLATION AND USE MANUAL
MATISSE
Chapter 3
page
8
After completing the structural frame, apply the upper panels with the self-tapping screws.
USE CARE IN HANDLING ALL PAINTED PARTS, ESPECIALLY THE PANELS, DOOR, AND FRAME, BECAUSE IT IS DIFFICULT TO REPAIR SCRATCHES.
Chapter 3
Technical service – all rights reserved by mcz spa
INSTALLATION AND USE MANUAL
3.5. FASTENING PLASTERBOARD
MATISSE
Chapter 3
page
9
You can now fasten the structural frame to the wall. If it is made of plasterboard, you can use the screws included in the package.
Chapter 3
Technical service – all rights reserved by mcz spa
3.6. ASSEMBLY OF FRAMES
INSTALLATION AND USE MANUAL
MATISSE
Chapter 3
page
10
VITI BLOCCAGGIO
CORNICE LATERALE
CORNICE SUPERIORE
The two side frames are to be inserted in the seats where they will be secured. The upper frame is set on the top of the two vertical and secured with the two screws M5.
Chapter 3
Technical service – all rights reserved by mcz spa
3.7. PLINTH ASSEMBLY
3.7.1. Assembly of rollers
INSTALLATION AND USE MANUAL
MATISSE
VITE AUTOPERFORANTE
PROFILO COPRIBORDO
Chapter 3
page
11
VITE AUTOPERFORANTE
RULLINO AGGANCIO
The Forma fireplace stove comes equipped with an edge-cover profile which must be removed by loosening the appropriate screws. Using the screws insert in each the hook roller of the package and re-tighten them
Chapter 3
Technical service – all rights reserved by mcz spa
3.7.2. Plinth assembly
INSTALLATION AND USE MANUAL
MATISSE
Chapter 3
page
12
The plinth is housed by means of the previously placed hook rollers
Chapter 3
Technical service – all rights reserved by mcz spa
INSTALLATION AND USE MANUAL
MATISSE
Chapter 3
page
13
Chapter 3
Technical service – all rights reserved by mcz spa
INSTALLATION AND USE MANUAL
MATISSE
3.8. TECHNICAL TERMS GLOSSARY OF THE PICTURES
PAGE 6 PAGE 6
VITE M5X10 DIN 6921 SCREW M5X10 DIN 6921 VITE AUTOPERFORANTE 4,2X16 SELF-TAPPING SCREW 4.2X16 VITE M4X10 UNI 7689 SCREW M4X10 UNI 7689 DADO FLANGIATO M5 FLANGED NUT M5 RULLINO AGGANCIO HOOK ROLLER VITE M5X8 ISO 7380 SCREW M5X8 ISO 7380 VITE M3X16 UNI 5931 SCREW M3X16 UNI 5931 VITE CARTONGESSO 3.9X35 SCREW FOR PLASTERBOARD 3.9X35
PAGE 10 PAGE 10
VITI BLOCCAGGIO LOCKING SCREWS CORNICE SUPERIORE UPPER FRAME CORNICE LATERALE SIDE FRAME
PAGE 11 PAGE 11
VITE AUTOPERFORANTE SELF-TAPPING SCREW PROFILO COPRIBORDO EDGE-COVER PROFILE RULLINO AGGANCIO HOOK ROLLER
Glossary
page
14
Glossary
Technical service – all rights reserved by mcz spa
Loading...