2.5.2. Automatic operation with temperature sensor...........................................................................26
2.5.2.1. Fitting the temperature sensor for automatic operation.......................................................27
2.5.3. Modifying the transmission/reception channel...........................................................................28
2.5.4. Replacing the remote control battery .......................................................................................28
Comfort air kit Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction
prohibited
SLIM-BASIC COMFORT AIR KIT Introduction
USE AND MAINTENANCE MANUAL
INTRODUCTION
Dear customer,
Thank you for purchasing this MCZ appliance.
Please read this manual thoroughly and keep it in a safe place:
it is a precious tool that will allow you to find out more about
the functions and characteristics of this device, and may also
be helpful later for future reference.
Please remember that this product MUST NOT be used by children,
who must always be kept at a safe distance!
Document revisions
In order to improve the product and to update this document, the
Manufacturer reserves the right to make any changes without notice.
All reproduction, even partial, of this manual without the Manufacturer's
authorisation is strictly prohibited.
Care of the manual and how to use it
Take care of this manual and keep it in a place where it can be
easily and quickly accessed.
page
3
Should you misplace or destroy the manual, or should it come to
be in poor condition, ask your retailer or the Manufacturer for
another copy, specifying the product identification data.
Any vital topics or those requiring special attention are printed
in“bold text”.
“Italic text”
is used to call your attention to other paragraphs in
this manual or for any additional explanations.
SYMBOLS USED IN THIS MANUAL
CAUTION!
This warning symbol indicates you should read carefully and
understand the message it refers to since failure to observe
the instructions given could damage the device seriously and
also endanger the person using it.
INFORMATION:
This symbol is used to highlight information that is deemed
important for the correct functioning of the device. Failure to
observe the instructions provided will jeopardise the use of
the device, the functioning of which may prove
unsatisfactory
Comfort air kit Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction
prohibited
SLIM-BASIC COMFORT AIR KIT Chapter 1
USE AND MAINTENANCE MANUAL
1. WARNINGS AND GUARANTEE TERMS
1.1. SAFETY WARNINGS
Installation, electrical connection, functional
check and maintenance of this device must only
be performed by qualified or authorised staff.
The instructions provided in this manual must always be
observed to ensure correct use of the device and to
avoid any accidents.
The product must be used, adjusted and programmed
by an adult. Errors or incorrect settings may cause
hazardous conditions and/ or malfunction.
The user (or anybody preparing to operate the device)
must read and fully understand the contents of this
instruction manual before beginning any operation.
The device must only be used for its intended purpose.
Any other use is considered incorrect and therefore
dangerous.
All liability for the incorrect use of the product lies fully
with the user and relieves the manufacturer of any civil
and criminal liability.
Unauthorised tampering of any nature or replacement of
spare parts with non-original parts may endanger the
operator. MCZ bears no civil or criminal liability for
tampering or use of non-original parts.
Incorrect installation or poor maintenance (not
conforming to the instructions provided in this manual)
may cause personal injury, harm to animals or damage
to property. In this case, the manufacturer is relieved of
any civil and criminal liability.
page
4
1.2. OPERATIONAL WARNINGS
Turn the device off in the event of a failure or
malfunctioning by cutting off the electricity supply.
The device must be stored in a dry place sheltered from
the weather.
INFORMATION:
In case of any problems please contact your retailer or
the Manufacturer's qualified, authorised personnel.
1.3. GUARANTEE TERMS
The Manufacturer guarantees the product, with the
exception of parts subject to normal wear specified
below, for two years from the date of purchase if the
product is installed and tested by a specialised fitter and in
accordance with the detailed instructions provided in the
instruction manual that accompanies the device.
General warnings Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction
prohibited
SLIM-BASIC COMFORT AIR KIT Chapter 1
USE AND MAINTENANCE MANUAL
The guarantee covers the replacement or free repair of
parts recognised as being faulty at source due to
manufacturing defects.
1.3.1. Exclusions
The guarantee does not cover all parts found to be faulty due to
negligence or inappropriate use, incorrect maintenance, or installation
not performed in compliance with the Manufacturer's instructions (see
relevant chapters in this use manual).
The Manufacturer will not be held liable for any damage which may either directly or indirectly - be caused to property, or personal injury or
harm to animals ensuing from failure to observe all the instructions
provided herein and specifically concerning the warnings regarding
installation, use and maintenance of the device.
Please contact your retailer and/or local importer in the event of
product failure.
Damage caused by transport and/ or handling is not covered by the
guarantee.
Reference must be made solely to the manual provided for product
installation and use.
The guarantee is not valid for damage caused by tampering with the
device, atmospheric agents, natural disasters, electrical discharges,
fires, faults in the electrical system and caused by failure to perform
maintenance or by incorrect maintenance in compliance with the
Manufacturer's instructions.
page
5
1.4. WARNINGS FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EUROPEAN
DIRECTIVE 2002/96/EC.
At the end of the product's working life, do not dispose of it together
with urban waste.
The product can be delivered to appropriate separated waste collection
centres provided by the municipal authorities or to retailers that provide
this service.
Disposing of the appliance separately prevents possible negative
impacts on the environment and health that are caused by
inappropriate disposal. This also allows recovery of the materials that
the appliance is composed of to achieve significant energy and resource
saving.
As a reminder of the obligation to dispose of appliances separately, the
product bears the symbol of a wheeled bin that has been crossed out
.
General warnings Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction
prohibited
SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL
2. SLIM FORCED VENTILATION KIT
2.1.1. Comfort Air Kit Components Slim Wood – Single package
2
1
7
9
page
3
6
6
4
1. Fan kit w/out box (2 pieces)
2. Pipe Diam.60 L=1.5 m (2 pieces)
3. Flexible hose Diam.10 L=1.5 m (2 pieces)
4. Flange Ø 100 (2 pieces)
5. Pipe clamp Diam.60-170 (4 pieces)
6. Pipe clamp Diam.64-76 (4 pieces)
5
7. Control unit+connection diagram
8. Remote control
9. Sensor
+ Wiring/Screws/Manual
N.B. control unit + remote control same package
2.1.2. Comfort Air Kit Components Slim Gas – single package
1
23
8
4
5
1. Fan kit w/out box (1 piece)
2. Flex hose Diam.6 L=1.5 m (1 piece)
3. Flexible hose Diam.10 L=1.5 m (1 piece)
4. Control unit+connection diagram
Basic comfort air kit
6
5. Remote control
6. Flange Ø 100 (1 piece)
7. Pipe clamp Diam.60-170 (4 pieces)
N.B. control unit + remote control same
package
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
7
SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL
2.1.3. HOT AIR OUTLETS
All the hot air outlets are delivered in two packages:
1 – Package containing glass
2 – rest of the material
page
7
2.1.3.1.
1. Complete Flip hot air outlet (1 piece)
2. Aluminium hot air outlet support (1 piece)
3. Aluminium hot air outlet frame (1 piece)
4. Lamp holder (2 pieces)
1
FLIP
2 345 6
5. Halogen lamp (2 pieces)
6. Black plastic tray (1 piece)
N.B.: pieces 2-3-4 are already assembled
2.1.3.2.
1. Complete Float hot air outlet (1 piece)
2. Aluminium hot air outlet support (1 piece)
3. Aluminium hot air outlet frame (1 piece)
4. Lamp holder (2 pieces)
FLOAT
1 2 3
456
5. Halogen lamp (2 pieces)
6. Black plastic tray (1 piece)
N.B.: pieces 2-3-4 are already assembled
Basic comfort air kit
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL
2.2. INSTALLING THE COMFORT AIR SLIM KIT AND
HOT AIR OUTLETS
2.2.1. INSTALLING THE FAN KIT
Forced ventilation envisages a Ø 100 pipe so, where envisaged, remove
the corresponding pre-perforated panel (Fig.A) and use the flange “4”
supplied with the kit whereas, for the closed fireplaces designed with
the Ø 150 outlet (Fig.B) alone, you will need to purchase accessory
code 4008047 (flange). Then connect the pipe “3” to the closed
fireplace and to the fan kit.
FLANGE SUPPLIED
“4” WITH THE FAN
KIT
page
FLANGE
ACCESSORY
CODE 4008047
9
FIGURE A FIGURE B
Basic comfort air kit
INTERNAL PREPERFORATED
PANEL Ø 100
PREPERFORATED
PANEL Ø 150
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.